Agentless G2 - Windows OS Service Status

Description

Monitors Windows services with regex support. Provide ServiceNames with comma-separated values and regex support using the following syntax: service name1,service name2,regexPattern1,regexPattern2. Supported version: Works on Windows Gateway with version 16.0.0 and above

Prerequisites

Works on Windows Gateway with version 16.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Agentless G2 - Windows OS Service StatusSystem_Windows_Service_Status_ExtSystem Windows Service Status ExtIt gives the current status of the services by matching with the given service name(s) or regex patterns(s). Below are the possible values: Stopped - 0,Running - 1,Start Pending - 2,Stop Pending - 3,Continue Pending - 4,Pause Pending - 5,Paused - 6,Unknown - 7

Array Networks

Description

Template to monitor the array networks metrics like memory utilization,CPU utilization,CPU temperature,Fan speed,powersupply state,health status,health connection failures,cache status,VIP status.

Prerequisites

NULL

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Array Networks Powersupply Statusarray_networks_PowersupplyStateArray Networks Powersupply StateMonitors the array networks powersupply state.[CA-SNMP-MIB8::powerstate:1.3.6.1.4.1.7564.32.3.0]
Array Networks Health Monitoringarray_networks_HealthConnectionFailuresArray Networks Health Connection FailurescountMonitors the Array Networks Health Connection Failures.[CA-SNMP-MIB8::hcConnFail:1.3.6.1.4.1.7564.27.1.2.1.11]
array_networks_HealthStatusArray Networks Health StatusMonitors the array networks health status.[CA-SNMP-MIB8::hcStatus:1.3.6.1.4.1.7564.27.1.2.1.5,hcConnFail:1.3.6.1.4.1.7564.27.1.2.1.11]
Array Networks Performance Monitoringarray_networks_MemoryUtilizationArray Networks Memory Utilization%Monitors the array networks memory utilization.[CA-SNMP-MIB8::sysMemoryUtilization:1.3.6.1.4.1.7564.4.2.0]
array_networks_CPU_UtilizationArray Networks CPU Utilization%Monitors the array networks CPU utilization.[CA-SNMP-MIB8::cpuUtilization:1.3.6.1.4.1.7564.30.1.0]
Array Networks Fan and Temperature - EXTarray_networks_TemperatureArray Networks TemperatureCelsiusMonitors the array networks system andCPU temperature.[CA-SNMP-MIB8::cputemp:1.3.6.1.4.1.7564.32.1.0]
array_networks_FanSpeedArray Networks Fan SpeedrpmMonitors the array networks fan speed.[CA-SNMP-MIB8::fanspeed:1.3.6.1.4.1.7564.32.2.0]
Array Networks Cache and VIP Statusarray_networks_VIP_StatusArray Networks VIP StatusMonitors the array networks VIP status.[CA-SNMP-MIB8::vipStatus:1.3.6.1.4.1.7564.22.1.0]
array_networks_CacheStatusArray Networks Cache StatusMonitors the array networks cache status.[CA-SNMP-MIB8::cacheStatus:1.3.6.1.4.1.7564.16.1.1.0,]

AudioCodes Control Element Performance

Description

Template for AudioCodes control elements performance monitoring. It monitors Media Realm Packet Jitter,Media Realm Packet Delay,Media Realm Bytes Transmitted,Media Realm Bytes Received,Media Realm MOS(Mean Opinion Score),Media Realm Packet Loss Received,Media Realm Packet Loss Transmitted,SIP Atttempted Calls,SIP Call Duration,SIP Total Call Duration,SIP Failed Calls,SIP Success Fax Calls,SIP Trunk Group Utilization,SIP Trunk Group Utilization Percentage. Validated on Mediant 3000. SysObjid : 1.3.6.1.4.1.5003.8.1.1.49.

Prerequisites

The device should have support for AC-PM-Control-MIB.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
AudioCodes - SIP Trunk Group Utilization Percentageac.pm.sip.trunk.group.utilization.percentSIP Trunk Group Utilization PercentageIt monitors the AudioCodes SIP trunk group utilization percentage.[AC-PM-Control-MIB::acPMSIPTrunkGroupPercentageUtilizationVal:1.3.6.1.4.1.5003.10.8.2.52.27.1.3].
AudioCodes - SIP Trunk Group Utilizationac.pm.sip.trunk.group.utilizationSIP Trunk Group UtilizationIt monitors the AudioCodes SIP trunk group utilization.[AC-PM-Control-MIB::acPMSIPTrunkGroupUtilizationVal:1.3.6.1.4.1.5003.10.8.2.52.26.1.3].
AudioCodes - SIP Success Fax Callsac.pm.sip.success.fax.callsSIP Success Fax CallsIt monitors the AudioCodes SIP success fax calls.[AC-PM-Control-MIB::acPMSIPFaxSuccessCallsVal:1.3.6.1.4.1.5003.10.8.2.52.10.1.3].
AudioCodes - SIP Failed Callsac.pm.sip.failed.callsSIP Failed CallsIt monitors the AudioCodes SIP failed calls.[AC-PM-Control-MIB::acPMSIPFailCallsVal:1.3.6.1.4.1.5003.10.8.2.52.7.1.3].
AudioCodes - SIP Call Durationac.pm.sip.call.durationSIP Call DurationIt monitors the AudioCodes SIP call duration.[AC-PM-Control-MIB::acPMSIPCallDurationVal:1.3.6.1.4.1.5003.10.8.2.52.2.1.3].
ac.pm.sip.total.call.durationSIP Total Call DurationIt monitors the AudioCodes SIP total call duration.[AC-PM-Control-MIB::acPMSIPCallDurationTotal:1.3.6.1.4.1.5003.10.8.2.52.2.1.12].
AudioCodes - SIP Atttempted Callsac.pm.sip.attempted.callsSIP Attempted CallsIt monitors the AudioCodes SIP attempted calls.[AC-PM-Control-MIB::acPMSIPAttemptedCallsVal:1.3.6.1.4.1.5003.10.8.2.52.1.1.3].
AudioCodes - Media Realm Packet Loss Transmittedac.pm.media.realm.packet.loss.txMedia Realm Packet Loss TransmittedIt monitors the AudioCodes media realm packet loss transmitted.[AC-PM-Control-MIB::acPMMediaRealmPacketLossTxVal:1.3.6.1.4.1.5003.10.8.2.53.11.1.3].
AudioCodes - Media Realm Packet Loss Receivedac.pm.media.realm.packet.loss.rxMedia Realm Packet Loss ReceivedIt monitors the AudioCodes media realm packet loss received.[AC-PM-Control-MIB::acPMMediaRealmPacketLossRxVal:1.3.6.1.4.1.5003.10.8.2.53.10.1.3].
AudioCodes - Media Realm Packet Jitterac.pm.media.realm.packet.jitterMedia Realm Packet JitterIt monitors the AudioCodes media realm packet jitter.[AC-PM-Control-MIB::acPMMediaRealmVERealmPacketJitterVal:1.3.6.1.4.1.5003.10.8.2.53.6.1.3]
AudioCodes - Media Realm Packet Delayac.pm.media.realm.packet.delayMedia Realm Packet DelayIt monitors AudioCodes media realm packet delay.[AC-PM-Control-MIB::acPMMediaRealmVERealmPacketDelayVal:1.3.6.1.4.1.5003.10.8.2.53.5.1.3].
AudioCodes - Media Realm MOS(Mean Opinion Score)ac.pm.media.realm.mosMedia Realm MOS(Mean Opinion Score)It monitors the AudioCodes media realm MOS(Mean Opinion Score).[AC-PM-Control-MIB::acPMMediaRealmRealmMOSVal:1.3.6.1.4.1.5003.10.8.2.53.7.1.3].
AudioCodes - Media Realm Bytes Transmittedac.pm.media.realm.bytes.txMedia Realm Bytes TransmittedBpsIt monitors the AudioCodes media realm bytes transmitted.[AC-PM-Control-MIB::acPMMediaRealmBytesTxVal:1.3.6.1.4.1.5003.10.8.2.53.1.1.3].
AudioCodes - Media Realm Bytes Receivedac.pm.media.realm.bytes.rxMedia Realm Bytes ReceivedBpsIt monitors the AudioCodes media realm bytes received.[AC-PM-Control-MIB::acPMMediaRealmBytesRxVal:1.3.6.1.4.1.5003.10.8.2.53.2.1.3].

BGP Neighbour Status - G2

Description

BGP Neighbour Status Monitoring.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
BGP Neighbour Statusbgp.neighbour.statusBGP Neighbour StatusProvides BGP peer connection state. Possible values are 1- Idle,2- Connect,3- Active,4- Opensent,5- Openconfirm,6- Established [OID: 1.3.6.1.2.1.15.3.1.2,1.3.6.1.2.1.15.3.1.7,1.3.6.1.2.1.15.3.1.9,1.3.6.1.2.1.15.3.1.16].

Big Cloud Fabric (BCF) Switch Hardware Monitors

Description

It monitors the Big Cloud Fabric (BCF) Switch hardware parameters like Fan status,Fan speed,Power supply status,Temperature reading and Temperature status. Validated on Switch Light OS SWL-OS-BCF-4.0.0(0).

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Big Cloud Fabric (BCF) Switch Fan Statusbcf.switch.fan.statusFan StatusIt monitors the Big Cloud Fabric switches fan status.[OID: 1.3.6.1.4.1.42623.1.2.2.1.2,1.3.6.1.4.1.42623.1.2.2.1.3]
bcf.switch.fan.speedFan SpeedrpmIt monitors the rotation speed of the fan in RPM.[OID: 1.3.6.1.4.1.42623.1.2.2.1.5]
Big Cloud Fabric (BCF) Switch Power Supply Statusbcf.switch.psu.statusPower Supply StatusIt monitors the Big Cloud Fabric (BCF) power supply unit sensors status.[OIDs: 1.3.6.1.4.1.42623.1.2.3.1.2,1.3.6.1.4.1.42623.1.2.3.1.3,1.3.6.1.4.1.42623.1.2.3.1.4]
Big Cloud Fabric (BCF) Switch Temperature Statusbcf.switch.temperature.statusTemperature StatusIt monitors the Big Cloud Fabric (BCF) Switch Temperature Status.[OIDs: 1.3.6.1.4.1.42623.1.2.1.1.2,1.3.6.1.4.1.42623.1.2.1.1.3,1.3.6.1.4.1.42623.1.2.1.1.4]
bcf.switch.temperature.valueTemperature in mCIt monitors the temperature of this sensor in mC.[OIDs: 1.3.6.1.4.1.42623.1.2.1.1.2,1.3.6.1.4.1.42623.1.2.1.1.4]

Buffalo - Terastation NAS(Network Attached Storage)

Description

Template to monitor Buffalo Terastation NAS parameters like Array Status,Array Capacity,Array Used,Array Utilization,Disk Capacity,Disk Used,Disk Utilization,Disk Smart Status,Disk Status,Failover Status,iSCSI Volume Status,Logical Volume Capacity,Logical Volume Used,Logical Volume Utilization. Validated on BUFFALO-TeraStation -TS51210R - Ver.4.60.

Prerequisites

Device should have support for BUFFALO-NAS-MIB.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Buffalo - Terastation NAS Arraybuffalo.terastation.nas.arrray.statusArray StatusIt monitors the status of a RAID array. This value is read from the 'arrayx' line in the file at /etc/melco/diskinfo.
  • -'NotSupport(-1)' means the RAID mode is not supported.
  • -'off(1)' means the RAID array is not configured.
  • -'raid0(2)' means the RAID array is being used as a RAID 0 array.
  • -'raid1(3)' means the RAID array is being used as a RAID 1 array.
  • -'raid5(4)' means the RAID array is being used as a RAID 5 array.
  • -'raid6(5)' means the RAID array is being used as a RAID 6 array.
  • -'raid10(6)' means the RAID array is being used as a RAID 10 array.
  • -'raid50(7)' means the RAID array is being used as a RAID 50 array.
  • -'raid51(8)' means the RAID array is being used as a RAID 51 array.
  • -'raid60(9)' means the RAID array is being used as a RAID 60 array.
  • -'raid61(10)' means the RAID array is being used as a RAID 61 array.
[BUFFALO-NAS-MIB :: nasArrayStatus : 1.3.6.1.4.1.5227.27.1.3.1.2]
buffalo.terastation.nas.arrray.capacityArray CapacityGBIt monitors the the maximum capacity of each array.The defaultvalue is '-1'.[BUFFALO-NAS-MIB :: nasArrayCapacity : 1.3.6.1.4.1.5227.27.1.3.1.3]
buffalo.terastation.nas.arrray.usedArray UsedGBIt monitors the usage of each array. The default value is '-1'.[BUFFALO-NAS-MIB :: nasArrayUsed : 1.3.6.1.4.1.5227.27.1.3.1.4]
buffalo.terastation.nas.arrray.utilizationArray Utilization%It monitors the Array Utilization [BUFFALO-NAS-MIB :: nasArrayCapacity : 1.3.6.1.4.1.5227.27.1.3.1.3,nasArrayUsed : 1.3.6.1.4.1.5227.27.1.3.1.4]
Buffalo - Terastation NAS Diskbuffalo.terastation.nas.disk.capacityDisk CapacityGBIt monitors the the maximum capacity of each drive The default value is '-1'.[BUFFALO-NAS-MIB :: nasDiskCapacity : 1.3.6.1.4.1.5227.27.1.2.1.3]
buffalo.terastation.nas.disk.usedDisk UsedGBIt monitors the usage of each drive. The default value is '-1'.[BUFFALO-NAS-MIB :: nasDiskUsed : 1.3.6.1.4.1.5227.27.1.2.1.4]
buffalo.terastation.nas.disk.utilizationDisk Utilization%It monitors the Disk Utilization [BUFFALO-NAS-MIB :: nasDiskCapacity : 1.3.6.1.4.1.5227.27.1.2.1.3,nasDiskUsed : 1.3.6.1.4.1.5227.27.1.2.1.4]
buffalo.terastation.nas.disk.smart.statusDisk Smart StatusMonitors the S.M.A.R.T. status of this storage device. Possible values are unavailable ( -2 ),unknown ( -1 ),normal ( 1 ),caution ( 2 ),fail ( 3 ) [BUFFALO-NAS-MIB :: nasDiskSMARTStauts : 1.3.6.1.4.1.5227.27.1.2.1.5]
Buffalo - TeraStation NAS Disk Statusbuffalo.terastation.nas.disk.statusDisk StatusIt monitors the status of internal drives. This value is read from the 'diskx' line in the file at /etc/melco/diskinfo.
  • -'notSupport(-1)' means the drive slot does not exist.
  • -'normal(1)' means the drive is being used as a JBOD.
  • -'array1(2)' means the drive is being used as a part of array 1.
  • -'array2(3)' means the drive is being used as a part of array 2.
  • -'standby(4)' means the drive is waiting as a spare drive.
  • -'degrade(5)' means the drive has degraded and has been removed from the array.
  • -'remove(6)' means the drive has been dismounted by a user.
  • -'standbyRemoved(7)' means the drive is configured as a spare drive and disconnected from the TeraStation.
  • -'degradeRemoved(8)' means the drive has degraded,and has been removed from the array and disconnected from the TeraStation.
  • -'removeRemoved(9)' means the drive has been dismounted by a user and is disconnected from the TeraStation.
  • -'array3(10)' means the drive is being used as a part of array 3.
  • -'array4(11)' means the drive is being used as a part of array 4.
  • -'mediaCartridge(12)' means the drive is configured as a media cartridge.
  • -'array5(13)' means the drive is being used as a part of array 5.
  • -'array6(14)' means the drive is being used as a part of array 6
[BUFFALO-NAS-MIB :: nasDiskStatus : 1.3.6.1.4.1.5227.27.1.2.1.2]
Buffalo - Terastation NAS Failover Statusbuffalo.terastation.nas.failure.statusFailover StatusIt monitors the Failover Status possible values are idle ( 0 ),busy ( 1 ),startingMain ( 2 ),startingBackup ( 3 ),initializing ( 4 ),stopping ( 32 ) [BUFFALO-NAS-MIB :: nasFailoverStatus : 1.3.6.1.4.1.5227.27.1.7.2.0]
Buffalo - Terastation NAS iSCSI Volume Statusbuffalo.terastation.nas.iscsi.statusiSCSI Volume StatusIt monitors the the connection status of the iSCSI volume. -'unknown(-1)' means the iSCSI volume is in an unknown state. -'connected(1)' means the iSCSI volume is connected via the iSCSI initiator. -'standing-by(2)' means the iSCSI volume is disconnected from the iSCSI initiator.[BUFFALO-NAS-MIB :: nasISCSIStatus : 1.3.6.1.4.1.5227.27.1.9.1.3]
Buffalo - Terastation NAS Logical Volumesbuffalo.terastation.nas.lv.capacityLogical Volume CapacityGBIt monitors the Logical Volume Capacity [BUFFALO-NAS-MIB :: nasLVCapacity : 1.3.6.1.4.1.5227.27.1.6.1.1.5.1.3]
buffalo.terastation.nas.lv.usedLogical Volume UsedGBIt monitors the logical volume Used.[BUFFALO-NAS-MIB :: nasLVUsed : 1.3.6.1.4.1.5227.27.1.6.1.1.5.1.4]
buffalo.terastation.nas.lv.utilizationLogical Volume Utilization%It monitors the logical volume utilization [BUFFALO-NAS-MIB :: nasLVCapacity : 1.3.6.1.4.1.5227.27.1.6.1.1.5.1.3,nasLVUsed : 1.3.6.1.4.1.5227.27.1.6.1.1.5.1.4]

Bycast StorageGRID - Overall System Status

Description

Template to monitor the Bycast StorageGRID Overall System Status. Enterprise OID : 1.3.6.1.4.1.28669 .BYCAST-STORAGEGRID-MIB.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Bycast StorageGRID - Overall System Statusbycast.storagegrid.overall.system.statusOverall System StatusIt monitors the system status of a StorageGRID.Possible values are unknown(1),adminDown(11),normal(21),notice(31),minor(41),major(51),critical(61) [BYCAST-STORAGEGRID-MIB::status:1.3.6.1.4.1.28669.1.0.1.1.1.0].

Cyxtera Appgate

Description

Template to monitor Cyxtera Appgate parameters like Sdp Appliance,Ctrl Authentication & Authorization,Ctrl License,Sdp Appliance Network Interfaces,Sdp Appliance Roles,Sdp Vpn,Ctrl Client Authentications Total,Ctrl Client Authentications Error,Ctrl Client AuthorizationTotal,Ctrl Client Authorization Error,Ctrl Admin Authentication Total,Ctrl Admin Authentication Error,Ctrl Admin Authorization Total,Ctrl Admin Authorization Error,Total number of entitled users in license,Total number of entitled sites in license,Total usage of licensed users,Total usage of licensed sites,Cyxtera appgate sdp appliance parameters like Sdp Appliance Cpu Usage Percent,Sdp Appliance Disk Usage Percent,Sdp Appliance Disk Total Bytes,Sdp Appliance Disk Used Bytes,Sdp Appliance Memory Usage Percent,Sdp Appliance Memory Total Bytes,Sdp Appliance Memory Used Bytes,Sdp Appliance Status,Sdp Appliance Upgrade Status,Sdp Appliance Network Interfaces parameters like Sdp Appliance Nic Tx Speed,Sdp Appliance Nic Rx Speed,Cyxtera appgate sdp appliance roles status,Role number of sessions,Sdp VpnTotal Memory Usage,Sdp VpnTotal Sessions.[CYXTERA-MIB :: ctrlClientAuthenticationTotal : 1.3.6.1.4.1.53245.1.1.6.1.1.1.0,ctrlClientAuthenticationError : 1.3.6.1.4.1.53245.1.1.6.1.1.3.0,ctrlClientAuthorizationTotal : 1.3.6.1.4.1.53245.1.1.6.1.2.1.0,ctrlClientAuthorizationError : 1.3.6.1.4.1.53245.1.1.6.1.2.3.0,ctrlAdminAuthenticationTotal : 1.3.6.1.4.1.53245.1.1.6.2.1.1.0,ctrlAdminAuthenticationError : 1.3.6.1.4.1.53245.1.1.6.2.1.3.0,ctrlAdminAuthorizationTotal : 1.3.6.1.4.1.53245.1.1.6.2.2.1.0,ctrlAdminAuthorizationError : 1.3.6.1.4.1.53245.1.1.6.2.2.3.0,ctrlLicenseEntitledUsers : 1.3.6.1.4.1.53245.1.1.6.3.1.1.0,ctrlLicenseEntitledSites : 1.3.6.1.4.1.53245.1.1.6.3.1.2.0,ctrlLicenseUsedUsers : 1.3.6.1.4.1.53245.1.1.6.3.2.1.0,ctrlLicenseUsedSites : 1.3.6.1.4.1.53245.1.1.6.3.2.2.0,sdpApplianceCpuUsagePercent : 1.3.6.1.4.1.53245.1.1.11.1.1.0,sdpApplianceDiskUsagePercent : 1.3.6.1.4.1.53245.1.1.11.2.1.0,sdpApplianceDiskTotalBytes : 1.3.6.1.4.1.53245.1.1.11.2.3.0,sdpApplianceDiskUsedBytes : 1.3.6.1.4.1.53245.1.1.11.2.4.0,sdpApplianceMemoryUsagePercent : 1.3.6.1.4.1.53245.1.1.11.3.1.0,sdpApplianceMemoryTotalBytes : 1.3.6.1.4.1.53245.1.1.11.3.3.0,sdpApplianceMemoryUsedBytes : 1.3.6.1.4.1.53245.1.1.11.3.4.0,sdpApplianceStatus : 1.3.6.1.4.1.53245.1.1.11.8.0,sdpApplianceUpgradeStatus : 1.3.6.1.4.1.53245.1.1.11.9.1.0,sdpApplianceNicTxSpeed : 1.3.6.1.4.1.53245.1.1.11.4.3.1.2,sdpApplianceNicRxSpeed : 1.3.6.1.4.1.53245.1.1.11.4.3.1.3,sdpApplianceRoleStatus : 1.3.6.1.4.1.53245.1.1.11.6.1.2,sdpApplianceRoleNumberOfSessions : 1.3.6.1.4.1.53245.1.1.11.6.1.4,vpnTotalMemoryUsage : 1.3.6.1.4.1.53245.1.1.5.10.0,vpnTotalSessions : 1.3.6.1.4.1.53245.1.1.5.11.0]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Cyxtera Appgate - Ctrl Authentication & Authorizationcyxtera_appgate_ctrladminauthentication_CtrlAdminAuthenticationTotalCyxtera Appgate Ctrl Admin Authentication TotalcountMonitors the cyxtera appgate ctrl admin total authentication.[CYXTERA-MIB :: ctrlAdminAuthenticationTotal : 1.3.6.1.4.1.53245.1.1.6.2.1.1.0]
cyxtera_appgate_ctrladminauthorizationtotal_CtrlAdminAuthorizationTotalCyxtera Appgate Ctrl Admin Authorization TotalcountMonitors the cyxtera appgate ctrl admin total authorization.[CYXTERA-MIB :: ctrlAdminAuthorizationTotal : 1.3.6.1.4.1.53245.1.1.6.2.2.1.0]
cyxtera_appgate_ctrlclientauthentication_CtrlClientAuthenticationErrorCyxtera Appgate Ctrl Client Authentications ErrorcountMonitors the cyxtera appgate ctrl client authentications total error.[CYXTERA-MIB :: ctrlClientAuthenticationError : 1.3.6.1.4.1.53245.1.1.6.1.1.3]
cyxtera_appgate_ctrladminauthorizationerror_CtrlAdminAuthorizationErrorCyxtera Appgate Ctrl Admin Authorization ErrorcountMonitors the cyxtera appgate ctrl admin total authorization error.[CYXTERA-MIB :: ctrlAdminAuthorizationError : 1.3.6.1.4.1.53245.1.1.6.2.2.3.0]
cyxtera_appgate_ctrlclientauthentication_CtrlClientAuthenticationTotalCyxtera Appgate Ctrl Client Authentications TotalcountMonitors the cyxtera appgate ctrl client total authentications.[CYXTERA-MIB :: ctrlClientAuthenticationTotal : 1.3.6.1.4.1.53245.1.1.6.1.1.1]
cyxtera_appgate_ctrlclientauthentication_CtrlClientAuthorizationTotalCyxtera Appgate Ctrl Client Authorization TotalcountMonitors the cyxtera appgate ctrl client total authorization.[CYXTERA-MIB :: ctrlClientAuthorizationTotal : 1.3.6.1.4.1.53245.1.1.6.1.2.1]
cyxtera_appgate_ctrlclientauthentication_CtrlClientAuthorizationErrorCyxtera Appgate Ctrl Client Authorization ErrorcountMonitors the cyxtera appgate ctrl total client authorization error.[CYXTERA-MIB :: ctrlClientAuthorizationError : 1.3.6.1.4.1.53245.1.1.6.1.2.3]
cyxtera_appgate_ctrladminauthenticationerror_CtrlAdminAuthenticationErrorCyxtera Appgate Ctrl Admin Authentication ErrorcountMonitors the cyxtera appgate ctrl admin total error authentication.[CYXTERA-MIB :: ctrlAdminAuthenticationError : 1.3.6.1.4.1.53245.1.1.6.2.1.3.0]
Cyxtera Appgate - Ctrl Licensecyxtera_appgate_ctrlLicense_CtrlLicenseUsedSitesCyxtera Appgate Ctrl License Used SitescountMonitors the total usage of licensed sites.[CYXTERA-MIB :: ctrlLicenseUsedSites : 1.3.6.1.4.1.53245.1.1.6.3.2.2.0]
cyxtera_appgate_ctrlLicense_CtrlLicenseEntitledSitesCyxtera Appgate Ctrl License Entitled SitescountMonitors the total number of entitled sites in cyxtera appgate ctrl license.[CYXTERA-MIB :: ctrlLicenseEntitledSites : 1.3.6.1.4.1.53245.1.1.6.3.1.2.0]
cyxtera_appgate_ctrlLicense_CtrlLicenseEntitledUsersCyxtera Appgate Ctrl License Entitled UserscountMonitors the total number of entitled users in cyxtera appgate ctrl license.[CYXTERA-MIB :: ctrlLicenseEntitledUsers : 1.3.6.1.4.1.53245.1.1.6.3.1.1.0]
cyxtera_appgate_ctrlLicense_CtrlLicenseUsedUsersCyxtera Appgate Ctrl License Used UserscountMonitors the total usage of licensed users.[CYXTERA-MIB :: ctrlLicenseUsedUsers : 1.3.6.1.4.1.53245.1.1.6.3.2.1.0]
Cyxtera Appgate - Sdp Appliancecyxtera_appgate_sdpappliance_SdpApplianceMemoryUsedGBCyxtera Appgate Sdp Appliance Memory Used GBGBMonitors the cyxtera appgate sdp appliance memory used in GB.[CYXTERA-MIB :: sdpApplianceMemoryUsedBytes : 1.3.6.1.4.1.53245.1.1.11.3.4.0]
cyxtera_appgate_sdpappliance_SdpApplianceStatusCyxtera Appgate Sdp Appliance StatusMonitors the status of cyxtera appgate sdp appliance. Alert will be generated when the status is not Healthy.[CYXTERA-MIB :: sdpApplianceStatus : 1.3.6.1.4.1.53245.1.1.11.8.0]
cyxtera_appgate_sdpappliance_SdpApplianceDiskUsagePercentCyxtera Appgate Sdp Appliance Disk Usage Percent%Monitors the cyxtera appgate sdp appliance disk usage in percent.[CYXTERA-MIB :: sdpApplianceDiskUsagePercent : 1.3.6.1.4.1.53245.1.1.11.2.1.0]
cyxtera_appgate_sdpappliance_SdpApplianceCpuUsagePercentCyxtera Appgate Sdp Appliance Cpu Usage Percent%Monitors the cyxtera appgate sdp appliance cpu usage in percent.[CYXTERA-MIB :: sdpApplianceCpuUsagePercent : 1.3.6.1.4.1.53245.1.1.11.1.1.0]
cyxtera_appgate_sdpappliance_SdpApplianceDiskTotalGBCyxtera Appgate Sdp Appliance Disk Total GBGBMonitors the cyxtera appgate sdp appliance disk total in GB.[CYXTERA-MIB :: sdpApplianceDiskTotalBytes : 1.3.6.1.4.1.53245.1.1.11.2.3.0]
cyxtera_appgate_sdpappliance_SdpApplianceUpgradeStatusCyxtera Appgate Sdp Appliance Upgrade StatusMonitors the cyxtera appgate sdp appliance upgrade status.[CYXTERA-MIB :: sdpApplianceUpgradeStatus : 1.3.6.1.4.1.53245.1.1.11.9.1.0]
cyxtera_appgate_sdpappliance_SdpApplianceDiskUsedGBCyxtera Appgate Sdp Appliance Disk Used GBGBMonitors the cyxtera appgate sdp appliance disk used in GB.[CYXTERA-MIB :: sdpApplianceDiskUsedBytes : 1.3.6.1.4.1.53245.1.1.11.2.4.0]
cyxtera_appgate_sdpappliance_SdpApplianceMemoryUsagePercentCyxtera Appgate Sdp Appliance Memory Usage Percent%Monitors the cyxtera appgate sdp appliance memory usage in percent.[CYXTERA-MIB :: sdpApplianceMemoryUsagePercent : 1.3.6.1.4.1.53245.1.1.11.3.1.0]
cyxtera_appgate_sdpappliance_SdpApplianceMemoryTotalGBCyxtera Appgate Sdp Appliance Memory Total GBGBMonitors the cyxtera appgate sdp appliance memory total in GB.[CYXTERA-MIB :: sdpApplianceMemoryTotalBytes : 1.3.6.1.4.1.53245.1.1.11.3.3.0]
Cyxtera Appgate - Sdp Appliance Network Interfacescyxtera_appgate_sdpappliancenetworkinterfaces_SdpApplianceNicTxSpeedCyxtera Appgate Sdp Appliance Nic Tx SpeedKbpsMonitors the cyxtera appgate sdp appliance network interface tx speed.[CYXTERA-MIB :: sdpApplianceNicTxSpeed : 1.3.6.1.4.1.53245.1.1.11.4.3.1.2]
cyxtera_appgate_sdpappliancenetworkinterfaces_SdpApplianceNicRxSpeedCyxtera Appgate Sdp Appliance Nic Rx SpeedKbpsMonitors the cyxtera appgate sdp appliance network interface Rx Speed.[CYXTERA-MIB :: sdpApplianceNicRxSpeed : 1.3.6.1.4.1.53245.1.1.11.4.3.1.3]
Cyxtera Appgate - Sdp Appliance Rolescyxtera_appgate_sdpapplianceroles_SdpApplianceRoleNumberOfSessionsCyxtera Appgate Sdp Appliance Role Number Of SessionscountMonitors the cyxtera appgate sdp appliance role number of sessions.[CYXTERA-MIB :: sdpApplianceRoleNumberOfSessions : 1.3.6.1.4.1.53245.1.1.11.6.1.4]
cyxtera_appgate_sdpapplianceroles_SdpApplianceRoleStatusCyxtera Appgate Sdp Appliance Role StatusMonitors the cyxtera appgate sdp appliance role status.Alert will be generated when the status is not Healthy.[CYXTERA-MIB :: sdpApplianceRoleStatus : 1.3.6.1.4.1.53245.1.1.11.6.1.2]
Cyxtera Appgate - Sdp Vpncyxtera_appgate_sdpvpn_VpnTotalMemoryUsageCyxtera Appgate Sdp VpnTotal Memory UsageBytesMonitors the total memory usage by the firewall engine in bytes.[CYXTERA-MIB :: vpnTotalMemoryUsage : 1.3.6.1.4.1.53245.1.1.5.10.0]
cyxtera_appgate_sdpvpn_VpnTotalSessionsCyxtera Appgate Sdp Vpn Total SessionscountMonitors the total number of sessions in VPN.[CYXTERA-MIB :: vpnTotalSessions : 1.3.6.1.4.1.53245.1.1.5.11.0]

Dns - Performance

Description

It monitors dns metrics like dns name response time and dns name response state.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Dns - Performancedns.name.response.timeDNS Name Response TimemsThe response time for DNS query for a given record,tagged by hostname
dns.name.resolved.stateDNS Name resolved stateNULLDns state whether it is resolved or not. If it is resolved returns boolean value

Dot3 Interface Statistics

Description

Monitors the statistics for a collection of Ethernet-like interfaces attached to a particular system.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Dot3 Statsdot3.excessive.collisionsInterface Excessive Collisions CountMonitors the current number of frames for which transmission on a particular interface fails due to excessive collisions.[OID: 1.3.6.1.2.1.10.7.2.1.9]
dot3.internal.mac.rcverrorsInterface Internal MAC Receive ErrorsMonitors the current number of frames for which reception on a particular interface fails due to an internal MAC sub-layer receive error.[OID: 1.3.6.1.2.1.10.7.2.1.16]
dot3.Internal.mac.transmiterrorsInterface Internal MAC Transmit ErrorsMonitors the current number of frames for which transmission on a interface fails due to an internal sub-layer transmit error.[OID: 1.3.6.1.2.1.10.7.2.1.10]
dot3.late.collisionsInterface Late CollisionsMonitors the current number of times that a collision is on a particular interface later than slot-time into the transmission of a packet.[OID: 1.3.6.1.2.1.10.7.2.1.8]
dot3.multiple.collision.framesInterface Multiple Collision FramesMonitors the current number of frames that are involved in more than one collision and are subsequently transmitted successfully.[OID: 1.3.6.1.2.1.10.7.2.1.5]
dot3.single.collision.framesInterface Single CollisionsMonitors the current number of frames that are involved in a single collision,and are subsequently transmitted successfully.[OID: 1.3.6.1.2.1.10.7.2.1.4]
fcs.errorsInterface FCS ErrorsProvides the current number of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check.[OID: 1.3.6.1.2.1.10.7.2.1.3]

DS1 Interface Statistics - G2

Description

Monitors errored seconds,severely errored seconds and unavailable seconds on DS1 interfaces.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
DS1 Interface Statsds1.total.errored.secsTotal Errored SecondsMonitors the number of Errored Seconds encountered by a DS1 interface in the previous 24-hour interval.[OIDs: 1.3.6.1.2.1.10.18.9.1.2,1.3.6.1.2.1.2.2.1.2]
ds1.total.severely.errored.secsTotal Severely Errored SecondsMonitors the number of Severely Errored Seconds encountered by a DS1 interface in the previous 24-hour interval.[OIDs: 1.3.6.1.2.1.10.18.9.1.3,1.3.6.1.2.1.2.2.1.2]
ds1.total.unavailable.secsTotal Unavailable SecondsMonitors the number of Unavailable Seconds encountered by a DS1 interface in the previous 24-hour interval.[OIDs: 1.3.6.1.2.1.10.18.9.1.5,1.3.6.1.2.1.2.2.1.2]

Eaton PDU - Performance

Description

Provides all the PDU parameters such as - the environmental Input Power,Voltage and Current measurements,Strapping status,Communication status of the EPDU,controller - sensor status etc

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eaton PDU Basic Detailseaton.pdu.frequency.statusInput Frequency StatusStatus of the measured input frequency relative to the nominal frequency and the admitted tolerance.[OID : 1.3.6.1.4.1.534.6.6.7.3.1.1.4.0.1]
eaton.pdu.internal.statusEaton PDU Internal StatusProvides status of the internal failure inside the PDU.[OID: 1.3.6.1.4.1.534.6.6.7.1.2.1.31.0]
eaton.pdu.strapping.statusEaton PDU Strapping StatusProvides status of the external communication with a strapping unit.[OID: 1.3.6.1.4.1.534.6.6.7.1.2.1.32.0]
eaton.pdu.communication.statusEaton PDU Communication StatusProvides status of the internal communication with the PDU.[OID: 1.3.6.1.4.1.534.6.6.7.1.2.1.30.0]
Eaton PDU Contact Sensor Statuseaton.pdu.contact.state2Eaton PDU Contact State - 2Provides the state of the contact sensor.Possible values are 1: contactBad(-1),2: contactOpen(0) and 3: contactClosed(1).[OID: 1.3.6.1.4.1.534.6.6.7.7.3.1.4.0.1,1.3.6.1.4.1.534.6.6.7.7.3.1.4.0.2].
eaton.pdu.contact.stateEaton PDU Contact StateProvides the state of the contact sensor.Possible values are 1: contactBad(-1),2: contactOpen(0) and 3: contactClosed(1).[OID: 1.3.6.1.4.1.534.6.6.7.7.3.1.4.0.1,1.3.6.1.4.1.534.6.6.7.7.3.1.4.0.2].
eaton.pdu.contact.probe.statusEaton PDU Contact Probe Status - 1Indicates whether a probe is connected or not. Will not be returned if the contact sensor is internal to the ePDU,in that case only contactState should be read. Possible values are 1: bad(-1),2: disconnected(0) and 3: connected(1).[OID: 1.3.6.1.4.1.534.6.6.7.7.3.1.3.0.1].
eaton.pdu.contact.probe.status.2Eaton PDU Contact Probe Status - 2Indicates whether a probe is connected or not .Will not be returned if the contact sensor is internal to the ePDU,in that case only contactState should be read. Possible values are 1: bad(-1),2: disconnected(0) and 3: connected(1).[OID: 1.3.6.1.4.1.534.6.6.7.7.3.1.3.0.2].
Eaton PDU Humidity Statuseaton.pdu.humidity.probe.statusEaton PDU Humidity Probe StatusIndicates whether a probe is connected or not. Possible values are 1: bad(-1),2: disconnected(0) and 3: connected(1).[OID: 1.3.6.1.4.1.534.6.6.7.7.2.1.3.0.1]
eaton.pdu.humidity.threshold.statusEaton PDU Humidity Threshold StatusProvides status of the measured humidity relative to the configured thresholds. Possible values are 1: good(0),2: lowWarning(1),3: lowCritical(2),4: highWarning(3) and 5: highCritical(4).[OID: 1.3.6.1.4.1.534.6.6.7.7.2.1.5.0.1]
eaton.pdu.humidity.valueEaton PDU Humidity ValueProvides the Humidity Value. Units are tenths of a percent relative humidity.[OID: 1.3.6.1.4.1.534.6.6.7.7.2.1.4.0.1].
Eaton PDU Input Voltage and CurrentInput Voltage Value - 2mVAn input voltage measurement value. Units are millivolts.
eaton.pdu.input.current.2Input Current Value - 2ampsAn input current measurement value. Units are milliamps.
eaton.pdu.input.current.1Input Current Value - 1ampsAn input current measurement value. Units are milliamps.
eaton.pdu.input.voltage.1Input Voltage Value - 1mVAn input voltage measurement value. Units are millivolts.
Eaton PDU Temperatureeaton.pdu.temperature.valueEaton PDU Temperature ValueCelsiusProvides Temperature. Units are in tenths of a degree according to the scale specified by temperatureScale (either Fahrenheit or Celsius). Divide by ten to get degrees.
eaton.pdu.temperature.probe.statusEaton PDU Temperature Probe StatusIndicates whether a probe is connected or not. Possible Values are 1: bad(-1),2: disconnected(0) and 3: connected(1) .[OID : enterprises.534.6.6.7.7.1.1.3.0.1]
eaton.pdu.temperature.threshold.statusEaton PDU Temperature Threshold StatusProvides status of the measured temperature relative to the configured thresholds. Possible values 1: good(0),2: lowWarning(1),3: lowCritical(2),4: highWarning(3) and 5: highCritical(4).[OID: 1.3.6.1.4.1.534.6.6.7.7.1.1.5.0.1]
Eaton PDU Total Input Power Measurementseaton.pdu.input.VAEaton PDU Input Total VAProvides input Total VA value. Units are VA. A negative value indicates that this object is not available.[OID: 1.3.6.1.4.1.534.6.6.7.3.5.1.3.0.1].
eaton.pdu.input.wattsEaton PDU Input WattsWProvides input Watts value. Units are Watts. A negative value indicates that this object is not available.[OID: 1.3.6.1.4.1.534.6.6.7.3.5.1.4.0.1]

Eaton XUPS Health

Description

Template to monitor Xtreme Unidirectional Protection System (XUPS). Monitors battery capacity,battery current,battery voltage,battery time remaining,environment temperature,output load,input frequency,output frequency,battery status (ABM) and Ambient Temperature. Can be applied on all the XUPS devices.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
XUPS Battery Statisticsxups.battery.capacityXUPS Battery Capacity%Provides the XUPS battery percent charge.[OID: 1.3.6.1.4.1.534.1.2.4]
xups.battery.currentXUPS Battery CurrentampsProvides the Xtreme Unidirectional Protection System (XUPS) battery current as reported by the UPS metering. Current is positive when discharging,negative when recharging the battery. Alert will get generated when the value is greater than equal to 30.[OID: 1.3.6.1.4.1.534.1.2.3.0]
xups.battery.voltageXUPS Battery VoltagevBattery voltage as reported by the UPS meters. Monitor failure indicates a problem with the voltage being supplied to end devices. There may not be enough voltage presently being provided to attached devices. As a result,devices may not operate as expected.[OID: 1.3.6.1.4.1.534.1.2.2.0]
xups.battery.time.remainingXUPS Battery Time RemainingsProvides the XUPS battery run time in seconds before UPS turns off due to low battery.[OID: 1.3.6.1.4.1.534.1.2.1].
XUPS Battery Status (ABM)xups.battery.abm.statusXUPS Battery Status (ABM)The status of the Advanced Battery Management.[OID: 1.3.6.1.4.1.534.1.2.5.0]
XUPS Environment Temperaturexups.environment.ambient.temperatureXUPS Environment Ambient TemperatureCProvides the Xtreme Unidirectional Protection System (XUPS) reading of the ambient temperature in the vicinity of the UPS or SNMP agent. Alert wil get generated when the value is not equal to zero.[OID: 1.3.6.1.4.1.534.1.6.1].
xups.environment.remote.temperatureXUPS Environment Remote TemperatureCProvides the XUPS reading of a remote temperature sensor connected to the UPS or SNMP agent.[OID: 1.3.6.1.4.1.534.1.6.5].
XUPS I/O Frequencyxups.input.frequencyXUPS Input FrequencyHzThe utility line frequency in tenths of Hz. Monitor failure indicates that the power being supplied to devices is fluctuating. Devices may be susceptible to problems with receiving power at varying frequencies.[OID: 1.3.6.1.4.1.534.1.3.1.0]
xups.output.frequencyXUPS Output FrequencyHzThe measured UPS output frequency in tenths of Hz. Monitor failure indicates that the power being supplied to devices is fluctuating. Devices may be susceptible to problems when receiving power at varying frequencies. Note: This configuration assumes that 60 Hz is nominal. Non-North American countries may have different nominal frequencies. As well,if your equipment is very sensitive,the range of acceptable values should be adjusted accordingly.[OID: 1.3.6.1.4.1.534.1.4.2.0]
XUPS Output Loadxups.output.loadXUPS Output Load%The UPS output load in percent of rated capacity. Monitor failure indicates that the percentage load attached to the UPS has been exceeded. The output load affects the running time of all components being supplied battery power.[OID: 1.3.6.1.4.1.534.1.4.1.0]
XUPS Output Statusxups.output.statusXUPS Output StatusThe present source of output power.[OID: 1.3.6.1.4.1.534.1.4.5.0]

ElasticSearch - Cluster Health and Statistics

Description

It monitors elastic search cluster related metrics like cluster status,delayed unassigned shards,active primary shards,active shards,unassigned shards,number of data nodes,number of nodes,relocating shards,initializing shards and pending tasks total. Validated this template on elastic search 6.5.2

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
ElasticSearch - Cluster Health and Statisticselasticsearch.cluster_statusElasticsearch Cluster StatusNULLThe elasticsearch cluster health as a number: red = 0,yellow = 1,green = 2
elasticsearch.active_shardsElasticsearch Active ShardscountThe number of active shards in the cluster.
elasticsearch.unassigned_shardsElasticsearch Unassgined ShardscountThe number of shards that are unassigned to a node.
elasticsearch.relocating_shardsElasticsearch Relocating ShardscountThe number of shards that are reloacting from one node to another.
elasticsearch.active_primary_shardsElasticsearch Active Primary ShardscountThe number of shards whose allocation has been delayed.
elasticsearch.initializing_shardsElasticsearch Intializing ShardscountThe number of shards that are currently initializing.
elasticsearch.pending_tasks_totalElasticsearch Pending Tasks TotalcountThe total number of pending tasks.
elasticsearch.delayed_unassigned_shardsElasticsearch Delayed Unassigned ShardscountThe number of shards whose allocation has been delayed.
elasticsearch.number_of_data_nodesElasticsearch Number Of Data NodescountThe number of data nodes in the cluster.
elasticsearch.number_of_nodesElasticsearch Number Of NodescountThe total number of nodes in the cluster.

ElasticSearch - Jvm

Description

It monitors Jvm metrics related to garbage collecor,heap memory,non heap memory and threads. Validated this template on elastic search 6.5.3

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
ElasticSearch - Jvmelasticsearch.jvm.threads.peak_countElasticsearch Jvm Threads Peak CountcountThe peak number of threads used by the JVM.
elasticsearch.jvm.mem.non_heap_committedElasticsearch Jvm Mem NonHeapCommittedBytesThe amount of memory guaranteed to be available to JVM non-heap.
elasticsearch.jvm.mem.heap_in_useElasticsearch Jvm Mem HeapInUseBytesThe amount of memory currently used by the JVM heap as a value between 0 and 1.
elasticsearch.jvm.gc.collectors.young.collection.countElasticsearch Jvm Gc Collectors Young Collection CountcountThe total count of minor GCs in the JVM that collects young generation objects.
elasticsearch.jvm.mem.pools.survivor.maxElasticsearch Jvm Mem Pools Survivor MaxBytesThe maximum amount of memory that can be used by the Survivor Space.
elasticsearch.jvm.mem.heap_maxElasticsearch Jvm Mem HeapMaxBytesThe maximum amount of memory that can be used by the JVM heap.
elasticsearch.jvm.mem.pools.young.usedElasticsearch Jvm Mem Pools Young UsedBytesThe amount of memory in bytes currently used by the Young Generation heap reagion.
elasticsearch.jvm.gc.collectors.old.collection.timeElasticsearch Jvm Gc Collectors Old Collection TimesThe total time spent in major GCs in the JVM that collect old generation objects.
elasticsearch.jvm.gc.collectors.old.collection.countElasticsearch Jvm Gc Collectors Old Collection CountcountThe total count of major GCs in the JVM that collect old generation objects.
elasticsearch.jvm.mem.pools.old.maxElasticsearch Jvm Mem Pools Old MaxBytesThe maximum amount of memory that can be used by the Old Generation heap reagion.
elasticsearch.jvm.mem.heap_committedElasticsearch Jvm Mem HeapCommittedBytesThe amount of memory guaranteed to be available to the JVM heap.
elasticsearch.jvm.gc.collectors.young.collection.timeElasticsearch Jvm Gc Collectors Young Collection TimesThe total time spent in minor GCs in the JVM that collects young generation objects.
elasticsearch.jvm.mem.pools.survivor.usedElasticsearch Jvm Mem Pools Survivor UsedBytesThe amount of memory in bytes currently used by the Survivor Space.
elasticsearch.jvm.mem.non_heap_usedElasticsearch Jvm Mem NonHeapUsedBytesThe amount of memory in bytes currently used by the JVM non-heap.
elasticsearch.jvm.mem.pools.young.maxElasticsearch Jvm Mem Pools Young MaxBytesThe maximum amount of memory that can be used by the Young Generation heap reagion.
elasticsearch.jvm.mem.heap_usedElasticsearch Jvm Mem HeapUsedBytesThe amount of memory in bytes currently used by the JVM heap.
elasticsearch.jvm.threads.countElasticsearch Jvm Threads CountcountThe number of active threads in the JVM.
elasticsearch.jvm.mem.pools.old.usedElasticsearch Jvm Mem Pools Old UsedBytesThe amount of memory in bytes currently used by the Old Generation heap reagion.

ElasticSearch - Performance - Node

Description

It monitors elastic search metrics related to process,http,file structures and indices Component - nodes Validated this template on elasticsearch 6.5.3

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
ElasticSearch - Performance - Nodeelasticsearch.fs.total.available_in_bytesElasticsearch Fs Total Available In BytesBytesThe total number of bytes available to this Java virtual machine on this file store.
elasticsearch.indices.request_cache.hit_countElasticsearch Indices RequestCache HitCountcountThe number of request cache hits.
elasticsearch.http.current_openElasticsearch Http Current OpencountThe number of current open HTTP connections.
elasticsearch.indices.indexing.index.timeElasticsearch Indices Indexing Index TimesThe total time spent indexing documents to an index.
elasticsearch.indices.segments.countElasticsearch Indices Segments CountcountThe number of segments in an index shard.
elasticsearch.indices.indexing.index_failedElasticsearch Indices Indexing Index FailedcountThe number of failed indexing operations.
elasticsearch.indices.fielddata.sizeElasticsearch Indices Fielddata SizeBytesThe size of the fielddata cache.
elasticsearch.indices.fielddata.evictionsElasticsearch Indices Fielddata EvictionscountThe total number of evictions from the fielddata cache.
elasticsearch.indices.request_cache.memory_size_in_bytesElasticsearch Indices RequestCache Memory SizeBytesThe memory used by the request cache.
elasticsearch.process.open_fdElasticsearch Process Open FdcountThe number of opened file descriptors associated with the current process,or -1 if not supported.
elasticsearch.indices.segments.memory_in_bytesElasticsearch Indices Segments MemoryBytesThe memory used by index segments.
elasticsearch.indices.docs.countElasticsearch Indices Docs CountcountThe number of indices in the cluster.
elasticsearch.indices.segments.doc_values_memory_in_bytesElasticsearch Indices Segments Doc Values MemoryBytesThe memory used by doc values.
elasticsearch.indices.segments.stored_fields_memory_in_bytesElasticsearch Indices Segments Stored Fields MemoryBytesThe memory used by stored fields.
elasticsearch.indices.segments.index_writer_memory_in_bytesElasticsearch Indices Segments Index Writer MemoryBytesThe memory used by the index writer.
elasticsearch.indices.query_cache.hit_countElasticsearch Indices QueryCache Hit CountcountThe number of query cache hits.
elasticsearch.indices.segments.version_map_memory_in_bytesElasticsearch Indices Segments Version Map MemoryBytesThe memory used by the segment version map.
elasticsearch.indices.segments.norms_memory_in_bytesElasticsearch Indices Segments Norms MemoryBytesThe memory used by norms.
elasticsearch.indices.segments.terms_memory_in_bytesElasticsearch Indices Segments Terms MemoryBytesThe memory used by terms.
elasticsearch.indices.query_cache.miss_countElasticsearch Indices QueryCache Miss CountcountThe number of query cache misses.
elasticsearch.indices.search.query.timeElasticsearch Indices Search Query TimesThe total time spent on queries.
elasticsearch.indices.query_cache.memory_size_in_bytesElasticsearch Indices QueryCache Memory SizeBytesThe memory used by the query cache.
elasticsearch.indices.request_cache.miss_countElasticsearch Indices RequestCache Miss CountcountThe number of request cache misses.
elasticsearch.indices.merges.total.timeElasticsearch Indices Merges Total TimesThe total time spent on segment merging.
elasticsearch.indices.segments.fixed_bit_set_memory_in_bytesElasticsearch Indices Segments Fixed Bit Set MemoryBytesThe memory used by fixed bit set.
elasticsearch.indices.segments.term_vectors_memory_in_bytesElasticsearch Indices Segments Term Vectors MemoryBytesThe memory used by term vectors.
elasticsearch.indices.request_cache.evictionsElasticsearch Indices RequestCache EvictionscountThe number of request cache evictions.
elasticsearch.fs.total.free_in_bytesElasticsearch Fs Total Free In BytesBytesThe total number of unallocated bytes in the file store.
elasticsearch.fs.total.total_in_bytesElasticsearch Fs Total Total In BytesBytesThe total size in bytes of the file store.

ElasticSearch - Threadpool - Node

Description

It monitors elastic search metrics related to threadpool. Component - nodes Validated this template on elastic search6.5.3

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
ElasticSearch - Threadpool - Nodeelasticsearch.thread_pool.snapshot.queueElasticsearch Threapool Snapshot QueuecountThe number of queued threads in the snapshot pool.
elasticsearch.thread_pool.listener.queueElasticsearch Threapool Listener QueuecountThe number of queued threads in the listener pool.
elasticsearch.thread_pool.generic.activeElasticsearch Threadpool Generic ActivecountThe number of active threads in the generic pool.
elasticsearch.thread_pool.flush.activeElasticsearch Threadpool Flush ActivecountThe number of active threads in the flush queue.
elasticsearch.thread_pool.generic.queueElasticsearch Threadpool Generic QueuecountThe number of queued threads in the generic pool.
elasticsearch.thread_pool.search.queueElasticsearch Threapool Search QueuecountThe number of queued threads in the search pool.
elasticsearch.thread_pool.listener.activeElasticsearch Threapool Listener ActivecountThe number of active threads in the listener pool.
elasticsearch.transport.server_openElasticsearch Transport ServerOpencountThe number of connections opened for cluster communication.
elasticsearch.thread_pool.fetch_shard_store.activeElasticsearch Threadpool FetchShardStore ActivecountThe number of active threads in the fetch shard store pool.
elasticsearch.thread_pool.snapshot.activeElasticsearch Threapool Snapshot ActivecountThe number of active threads in the snapshot pool.
elasticsearch.thread_pool.search.activeElasticsearch Threapool Search ActivecountThe number of active threads in the search pool.
elasticsearch.thread_pool.index.queueElasticsearch Threapool Index QueuecountThe number of queued threads in the index pool.
elasticsearch.thread_pool.fetch_shard_started.queueElasticsearch Threadpool FetchShardStarted QueuecountThe number of queued threads in the fetch shard started pool.
elasticsearch.thread_pool.force_merge.queueElasticsearch Threadpool ForceMerge QueuecountThe number of queued threads for force merge operations.
elasticsearch.thread_pool.refresh.activeElasticsearch Threapool Refresh ActivecountThe number of active threads in the refresh pool.
elasticsearch.thread_pool.management.activeElasticsearch Threapool Management ActivecountThe number of active threads in the management pool.
elasticsearch.thread_pool.get.activeElasticsearch Threapool Get ActivecountThe number of active threads in the get pool.
elasticsearch.thread_pool.get.queueElasticsearch Threapool Get QueuecountThe number of queued threads in the get pool.
elasticsearch.thread_pool.index.activeElasticsearch Threapool Index ActivecountThe number of active threads in the index pool.
elasticsearch.thread_pool.management.queueElasticsearch Threapool Management QueuecountThe number of queued threads in the management pool.
elasticsearch.transport.rx_sizeElasticsearch Transport RxSizeBytesThe total size of data received in cluster communication.
elasticsearch.transport.tx_sizeElasticsearch Transport TxSizeBytesThe total size of data sent in cluster communication.
elasticsearch.thread_pool.write.activeElasticsearch Threapool Write ActivecountThe number of active threads in the write pool.
elasticsearch.thread_pool.write.queueElasticsearch Threapool Write QueuecountThe number of queued threads in the write pool.
elasticsearch.thread_pool.force_merge.activeElasticsearch Threadpool ForceMerge ActivecountThe number of active threads for force merge operations.
elasticsearch.thread_pool.fetch_shard_store.queueElasticsearch Threadpool FetchShardStore QueuecountThe number of queued threads in the fetch shard store pool.
elasticsearch.thread_pool.flush.queueElasticsearch Threadpool Flush QueuecountThe number of queued threads in the flush pool.
elasticsearch.thread_pool.fetch_shard_started.activeElasticsearch Threadpool FetchShardStarted ActivecountThe number of active threads in the fetch shard started pool.
elasticsearch.thread_pool.refresh.queueElasticsearch Threapool Refresh QueuecountThe number of queued threads in the refresh pool.

Eltek eNexus - Battery

Description

Monitors the Eltek eNexus battery and battery group2 parameters like Battery Group2 Voltage Status,Battery Group2 Voltage Value,Battery Group2 Currents Status,Battery Group2 Currents Value,Battery Group2 Temperatures Status,Battery Group2 Temperatures Value,BatteryGroup2 Time Left Status,Battery Group2 Time Left Value,Battery Group2 Remaining Capacity Status,Battery Group2 Remaining Capacity Value,Battery Group2 Used Capacity Status,Battery Group2 Used Capacity Value,Battery Group2 Total Capacity Status,Battery Group2 Total Capacity Value,Battery Group2 Quality Status,Battery Group2 Quality Value,Battery Group2 LVBD Status,Battery Group2 LVBD Value,Battery Group2 Charge Current Limit Value,Battery Group2 Bank Status,Battery Group2 Equalize Voltage,Battery Group2 Ah Charged Status,Battery Group2 Ah Charged Value,Battery Group2 Ah Discharged Status,Battery Group2 Ah Discharged Value,Monitors the Eltek eNexus battery parameters like Battery Voltage Status,Battery Voltage Value,Battery Currents Status,Battery Currents Value,Battery Temperatures Status,Battery Temperatures Value,Battery Time Left Status,Battery Time Left Value,Battery Remaining Capacity Status,Battery Remaining Capacity Value,Battery Used Capacity Status,Battery Used Capacity Value,Battery Total Capacity Status,Battery Total Capacity Value,Battery Quality Status,Battery Quality Value,Battery LVBD Status,Battery LVBD Value,Battery Charge Current Limit Value,Battery Ah Charged Status,Battery Ah Charged Value,Battery Ah Discharged Status,Battery Ah Discharged Value.[SP2-MIB :: batteryGroup2VoltageStatus : 1.3.6.1.4.1.12148.10.15.5.1.0,batteryGroup2VoltageValue : 1.3.6.1.4.1.12148.10.15.5.5.0,batteryGroup2CurrentsStatus : 1.3.6.1.4.1.12148.10.15.6.1.0,batteryGroup2CurrentsValue : 1.3.6.1.4.1.12148.10.15.6.5.0,batteryGroup2TemperaturesStatus : 1.3.6.1.4.1.12148.10.15.7.1.0,batteryGroup2TemperaturesValue : 1.3.6.1.4.1.12148.10.15.7.5.0,batteryGroup2TimeLeftStatus : 1.3.6.1.4.1.12148.10.15.8.1.0,batteryGroup2TimeLeftValue : 1.3.6.1.4.1.12148.10.15.8.5.0,batteryGroup2RemainingCapacityStatus : 1.3.6.1.4.1.12148.10.15.9.1.0,batteryGroup2RemainingCapacityValue : 1.3.6.1.4.1.12148.10.15.9.5.0,batteryGroup2UsedCapacityStatus : 1.3.6.1.4.1.12148.10.15.10.1.0,batteryGroup2UsedCapacityValue : 1.3.6.1.4.1.12148.10.15.10.5.0,batteryGroup2TotalCapacityStatus : 1.3.6.1.4.1.12148.10.15.11.1.0,batteryGroup2TotalCapacityValue : 1.3.6.1.4.1.12148.10.15.11.5.0,batteryGroup2QualityStatus : 1.3.6.1.4.1.12148.10.15.12.1.0,batteryGroup2QualityValue : 1.3.6.1.4.1.12148.10.15.12.5.0,batteryGroup2LVBDStatus : 1.3.6.1.4.1.12148.10.15.13.1.0,batteryGroup2LVBDValue : 1.3.6.1.4.1.12148.10.15.13.5.0,batteryGroup2ChargeCurrentLimitValue : 1.3.6.1.4.1.12148.10.15.14.2.0,batteryGroup2BankStatus : 1.3.6.1.4.1.12148.10.15.18.1.0,batteryGroup2EqualizeVoltage : 1.3.6.1.4.1.12148.10.15.21.1.0,batteryGroup2AhChargedStatus : 1.3.6.1.4.1.12148.10.15.22.1.0,batteryGroup2AhChargedValue : 1.3.6.1.4.1.12148.10.15.22.5.0,batteryGroup2AhDischargedStatus : 1.3.6.1.4.1.12148.10.15.23.1.0,batteryGroup2AhDischargedValue : 1.3.6.1.4.1.12148.10.15.23.5.0,batteryVoltageStatus : 1.3.6.1.4.1.12148.10.10.5.1.0,batteryVoltageValue : 1.3.6.1.4.1.12148.10.10.5.5.0,batteryCurrentsStatus : 1.3.6.1.4.1.12148.10.10.6.1.0,batteryCurrentsValue : 1.3.6.1.4.1.12148.10.10.6.5.0,batteryTemperaturesStatus : 1.3.6.1.4.1.12148.10.10.7.1.0,batteryTemperaturesValue : 1.3.6.1.4.1.12148.10.10.7.5.0,batteryTimeLeftStatus : 1.3.6.1.4.1.12148.10.10.8.1.0,batteryTimeLeftValue : 1.3.6.1.4.1.12148.10.10.8.5.0,batteryRemainingCapacityStatus : 1.3.6.1.4.1.12148.10.10.9.1.0,batteryRemainingCapacityValue : 1.3.6.1.4.1.12148.10.10.9.5.0,batteryUsedCapacityStatus : 1.3.6.1.4.1.12148.10.10.10.1.0,batteryUsedCapacityValue : 1.3.6.1.4.1.12148.10.10.10.5.0,batteryTotalCapacityStatus : 1.3.6.1.4.1.12148.10.10.11.1.0,batteryTotalCapacityValue : 1.3.6.1.4.1.12148.10.10.11.5.0,batteryQualityStatus : 1.3.6.1.4.1.12148.10.10.12.1.0,batteryQualityValue : 1.3.6.1.4.1.12148.10.10.12.5.0,batteryLVBDStatus : 1.3.6.1.4.1.12148.10.10.13.1.0,batteryLVBDValue : 1.3.6.1.4.1.12148.10.10.13.5.0,batteryChargeCurrentLimitValue : 1.3.6.1.4.1.12148.10.10.14.2.0,batteryAhChargedStatus : 1.3.6.1.4.1.12148.10.10.23.1.0,batteryAhChargedValue : 1.3.6.1.4.1.12148.10.10.23.5.0,batteryAhDischargedStatus : 1.3.6.1.4.1.12148.10.10.24.1.0,batteryAhDischargedValue : 1.3.6.1.4.1.12148.10.10.24.5.0]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eltek eNexus - Batteryeltek_eNexus_battery_BatteryAhDischargedValueEltek eNexus Battery Ah Discharged ValueampsMonitors the calculated battery ah (x100) discharged value.[SP2-MIB :: batteryAhDischargedValue : 1.3.6.1.4.1.12148.10.10.24.5.0]
eltek_eNexus_battery_BatteryTotalCapacityStatusEltek eNexus Battery Total Capacity StatusMonitors the status of the total capacity monitor.[SP2-MIB :: batteryTotalCapacityStatus : 1.3.6.1.4.1.12148.10.10.11.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_battery_BatteryAhChargedValueEltek eNexus Battery Ah Charged ValueampsMonitors the calculated battery ah (x100) charged value.[SP2-MIB :: batteryAhChargedValue : 1.3.6.1.4.1.12148.10.10.23.5.0]
eltek_eNexus_battery_BatteryVoltageValueEltek eNexus Battery Voltage ValuevMonitors the value of the measured battery voltage.[SP2-MIB :: batteryVoltageValue : 1.3.6.1.4.1.12148.10.10.5.5.0].
eltek_eNexus_battery_BatteryUsedCapacityStatusEltek eNexus Battery Used Capacity StatusMonitors the status of the battery used capacity (DoD) monitor.[SP2-MIB :: batteryUsedCapacityStatus : 1.3.6.1.4.1.12148.10.10.10.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_battery_BatteryCurrentsValueEltek eNexus Battery Currents ValueampsMonitors the measured total battery current.[SP2-MIB :: batteryCurrentsValue : 1.3.6.1.4.1.12148.10.10.6.5.0]
eltek_eNexus_battery_BatteryUsedCapacityValueEltek eNexus Battery Used Capacity ValueampsMonitors the estimated battery used capacity (DoD).[SP2-MIB :: batteryUsedCapacityValue : 1.3.6.1.4.1.12148.10.10.10.5.0.]
eltek_eNexus_battery_BatteryRemainingCapacityValueEltek eNexus Battery Remaining Capacity ValueampsMonitors the Battery remaining capacity (SOC) value.[SP2-MIB :: batteryRemainingCapacityValue : 1.3.6.1.4.1.12148.10.10.9.5.0]
eltek_eNexus_battery_BatteryChargeCurrentLimitValueEltek eNexus Battery Charge Current Limit ValueampsMonitors the Battery charging current limit value.[SP2-MIB :: batteryChargeCurrentLimitValue : 1.3.6.1.4.1.12148.10.10.14.2.0]
eltek_eNexus_battery_BatteryTimeLeftValueEltek eNexus Battery Time Left ValuemMonitors the estimated value of battery remaining backup time.[SP2-MIB :: batteryTimeLeftValue : 1.3.6.1.4.1.12148.10.10.8.5.0]
eltek_eNexus_battery_BatteryLVBDValueEltek eNexus Battery LVBD ValueMonitors the measured value of the LVBD.[SP2-MIB :: batteryLVBDValue : 1.3.6.1.4.1.12148.10.10.13.5.0].
eltek_eNexus_battery_BatteryVoltageStatusEltek eNexus Battery Voltage Statusmonitors the status of the measured battery voltage.[SP2-MIB :: batteryVoltageStatus : 1.3.6.1.4.1.12148.10.10.5.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_battery_BatteryTemperaturesValueEltek eNexus Battery Temperatures ValueFMonitors the highest value of the enabled battery temperature measurements.[SP2-MIB :: batteryTemperaturesValue : 1.3.6.1.4.1.12148.10.10.7.5.0]
eltek_eNexus_battery_BatteryCurrentsStatusEltek eNexus Battery Currents StatusMonitors the status of the measured battery current.[SP2-MIB :: batteryCurrentsStatus : 1.3.6.1.4.1.12148.10.10.6.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19) .
eltek_eNexus_battery_BatteryTimeLeftStatusEltek eNexus Battery Time Left Statusmonitors the status of the estimated battery remaining backup time.[SP2-MIB :: batteryTimeLeftStatus : 1.3.6.1.4.1.12148.10.10.8.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_battery_BatteryTemperaturesStatusEltek eNexus Battery Temperatures StatusMonitors the state of the battery fuses/breakers.[SP2-MIB :: batteryTemperaturesStatus : 1.3.6.1.4.1.12148.10.10.7.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_battery_BatteryTotalCapacityValueEltek eNexus Battery Total Capacity ValueampsMonitors the estimated total battery capacity (installed Ah - SoH) value.[SP2-MIB :: batteryTotalCapacityValue : 1.3.6.1.4.1.12148.10.10.11.5.0]
eltek_eNexus_battery_BatteryRemainingCapacityStatusEltek eNexus Battery Remaining Capacity StatusMonitors the status of the battery remaining capacity monitor.[SP2-MIB :: batteryRemainingCapacityStatus : 1.3.6.1.4.1.12148.10.10.9.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_battery_BatteryQualityValueEltek eNexus Battery Quality Value%Monitors the calculated battery quality (SoH).[SP2-MIB :: batteryQualityValue : 1.3.6.1.4.1.12148.10.10.12.5.0].
Eltek eNexus - Battery Group2eltek_eNexus_BatteryGroup2ChargeCurrentLimitValueEltek eNexus Battery Group2 Charge Current Limit ValueampsMonitors the battery charging current limit value.[SP2-MIB :: batteryGroup2ChargeCurrentLimitValue : 1.3.6.1.4.1.12148.10.15.14.2.0].
eltek_eNexus_BatteryGroup2UsedCapacityStatusEltek eNexus Battery Group2 Used Capacity StatusMonitors the status of the battery used capacity (DoD) monitor.[SP2-MIB :: batteryGroup2UsedCapacityStatus : 1.3.6.1.4.1.12148.10.15.10.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_BatteryGroup2QualityStatusEltek eNexus Battery Group2 Quality StatusMonitors the status of the battery quality (SoH) monitor.[SP2-MIB :: batteryGroup2QualityStatus : 1.3.6.1.4.1.12148.10.15.12.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19) .
eltek_eNexus_BatteryGroup2EqualizeVoltageEltek eNexus Battery Group2 Equalize VoltagevMonitors the Voltage at which the DC System equalize charges the batteries.[SP2-MIB :: batteryGroup2EqualizeVoltage : 1.3.6.1.4.1.12148.10.15.21.1.0]
eltek_eNexus_BatteryGroup2AhDischargedValueEltek eNexus Battery Group2 Ah Discharged ValueampsMonitors the status of the battery ah discharged monitor.[SP2-MIB :: batteryGroup2AhDischargedValue : 1.3.6.1.4.1.12148.10.15.23.5.0]
eltek_eNexus_BatteryGroup2AhChargedValueEltek eNexus Battery Group2 Ah Charged ValueampsMonitors the calculated battery ah (x100) charged value.[SP2-MIB :: batteryGroup2AhChargedValue : 1.3.6.1.4.1.12148.10.15.22.5.0]
eltek_eNexus_BatteryGroup2TimeLeftStatusEltek eNexus BatteryGroup2 Time Left StatusMonitors the status of the estimated battery remaining backup time.[SP2-MIB :: batteryGroup2TimeLeftStatus : 1.3.6.1.4.1.12148.10.15.8.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19) .
eltek_eNexus_BatteryGroup2AhDischargedStatusEltek eNexus Battery Group2 Ah Discharged StatusMonitors the status of the battery ah discharged monitor.[SP2-MIB :: batteryGroup2AhDischargedStatus : 1.3.6.1.4.1.12148.10.15.23.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_BatteryGroup2QualityValueEltek eNexus Battery Group2 Quality Value%Monitors the calculated battery quality (SoH) based on the latest battery test.[SP2-MIB :: batteryGroup2QualityValue : 1.3.6.1.4.1.12148.10.15.12.5.0]
eltek_eNexus_BatteryGroup2VoltageValueEltek eNexus Battery Group2 Voltage ValuevMonitors the value of the measured battery voltage.[SP2-MIB :: batteryGroup2VoltageValue : 1.3.6.1.4.1.12148.10.10.5.5.0]
eltek_eNexus_BatteryGroup2TotalCapacityStatusEltek eNexus Battery Group2 Total Capacity StatusMonitors the status of the total capacity monitor.[SP2-MIB :: batteryGroup2TotalCapacityStatus : 1.3.6.1.4.1.12148.10.15.11.1.0]
eltek_eNexus_BatteryGroup2TemperaturesStatusEltek eNexus Battery Group2 Temperatures StatusMonitors the state of the battery fuses/breakers can be either one of the defined enumerated values.[SP2-MIB :: batteryGroup2TemperaturesStatus : 1.3.6.1.4.1.12148.10.15.7.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_BatteryGroup2TemperaturesValueEltek eNexus Battery Group2 Temperatures ValueFMonitors the highest value of the enabled battery temperature.[SP2-MIB :: batteryGroup2TemperaturesValue : 1.3.6.1.4.1.12148.10.15.7.5.0]
eltek_eNexus_BatteryGroup2TotalCapacityValueEltek eNexus Battery Group2 Total Capacity ValueampsMonitors the estimated total battery capacity (installed Ah - SoH) value.[SP2-MIB :: batteryGroup2TotalCapacityValue : 1.3.6.1.4.1.12148.10.15.11.5.0]
eltek_eNexus_BatteryGroup2RemainingCapacityValueEltek eNexus Battery Group2 Remaining Capacity ValueampsMonitors the Battery remaining capacity (SOC) value estimated from the latest battery test result.[SP2-MIB :: batteryGroup2RemainingCapacityValue : 1.3.6.1.4.1.12148.10.15.9.5.0]
eltek_eNexus_BatteryGroup2CurrentsStatusEltek eNexus Battery Group2 Currents StatusMonitors the status of the measured battery current.[SP2-MIB :: batteryGroup2CurrentsStatus : 1.3.6.1.4.1.12148.10.10.6.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_BatteryGroup2AhChargedStatusEltek eNexus Battery Group2 Ah Charged StatusMonitors the status of the battery ah charged monitor.[SP2-MIB :: batteryGroup2AhChargedStatus : 1.3.6.1.4.1.12148.10.15.22.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_BatteryGroup2LVBDStatusEltek eNexus Battery Group2 LVBD StatusMonitors whether the Battery Contactor is connected,disconnected,disabled.[SP2-MIB :: batteryGroup2LVBDStatus : 1.3.6.1.4.1.12148.10.15.13.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_BatteryGroup2BankStatusEltek eNexus Battery Group2 Bank StatusMonitors the overall status of battery bank.[SP2-MIB :: batteryGroup2BankStatus : 1.3.6.1.4.1.12148.10.15.18.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_BatteryGroup2RemainingCapacityStatusEltek eNexus Battery Group2 Remaining Capacity StatusMonitors the status of the battery remaining capacity monitor.[SP2-MIB :: batteryGroup2RemainingCapacityStatus : 1.3.6.1.4.1.12148.10.15.9.1.0]
eltek_eNexus_BatteryGroup2CurrentsValueEltek eNexus Battery Group2 Currents ValueampsMonitors the measured total battery current.[SP2-MIB :: batteryGroup2CurrentsValue : 1.3.6.1.4.1.12148.10.15.6.5.0]
eltek_eNexus_BatteryGroup2LVBDValueEltek eNexus Battery Group2 LVBD ValueMonitors the measured value of the LVBD.[SP2-MIB :: batteryGroup2LVBDValue : 1.3.6.1.4.1.12148.10.15.13.5.0]
eltek_eNexus_BatteryGroup2TimeLeftValueEltek eNexus Battery Group2 Time Left ValuemMonitors the estimated value of battery remaining backup time.[SP2-MIB :: batteryGroup2TimeLeftValue : 1.3.6.1.4.1.12148.10.15.8.5.0]
eltek_eNexus_BatteryGroup2VoltageStatusEltek eNexus Battery Group2 Voltage StatusMonitors the status of the measured battery voltage.[SP2-MIB :: batteryGroup2VoltageStatus : 1.3.6.1.4.1.12148.10.10.5.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_BatteryGroup2UsedCapacityValueEltek eNexus Battery Group2 Used Capacity ValueampsMonitors the estimated battery used capacity (DoD).[SP2-MIB :: batteryGroup2UsedCapacityValue : 1.3.6.1.4.1.12148.10.15.10.5.0]

Eltek eNexus - DcDc

Description

Monitors the Eltek eNexus DcDc parameters like DcDc Capacity Status,DcDc Capacity Value,DcDc Error Status,DcDc Error Value,DcDc Current Status,DcDc Current Value,DcDc Group Status,DcDc Group Output Voltage.[SP2-MIB :: dcdcCapacityStatus : 1.3.6.1.4.1.12148.10.6.4.1.1,dcdcCapacityValue : 1.3.6.1.4.1.12148.10.6.4.1.5,dcdcErrorStatus : 1.3.6.1.4.1.12148.10.6.6.1.1,dcdcErrorValue : 1.3.6.1.4.1.12148.10.6.6.1.5,dcdcCurrentStatus : 1.3.6.1.4.1.12148.10.6.3.1.1,dcdcCurrentValue : 1.3.6.1.4.1.12148.10.6.3.1.5,dcdcGroupStatus : 1.3.6.1.4.1.12148.10.6.2.1.2,dcdcGroupOutputVoltage : 1.3.6.1.4.1.12148.10.6.2.1.4]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eltek eNexus - DcDc Capacityeltek_eNexus_dcdc_DcDcCapacityStatusEltek eNexus DcDc Capacity StatusMonitors the status of the measured used dcdc capacity.[SP2-MIB :: dcdcCapacityStatus : 1.3.6.1.4.1.12148.10.6.4.1.1].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_dcdc_DcDcCapacityValueEltek eNexus DcDc Capacity ValueMonitors the used dcdc capacity value presented in percentage.[SP2-MIB :: dcdcCapacityValue : 1.3.6.1.4.1.12148.10.6.4.1.5]
Eltek eNexus - DcDc Capacity Erroreltek_eNexus_dcdc_DcDcErrorStatusEltek eNexus DcDc Error StatusMonitor the status value shows if the number of failed units is higher than the defined alarm level.[SP2-MIB :: dcdcErrorStatus : 1.3.6.1.4.1.12148.10.6.6.1.1].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_dcdc_DcDcErrorValueEltek eNexus DcDc Error ValuecountMonitors the number of failed dcdc converters.[SP2-MIB :: dcdcErrorValue : 1.3.6.1.4.1.12148.10.6.6.1.5].
Eltek eNexus - DcDc Currenteltek_eNexus_dcdc_DcDcCurrentStatusEltek eNexus DcDc Current StatusMonitors the status of the measured total dcdc current.[SP2-MIB :: dcdcCurrentStatus : 1.3.6.1.4.1.12148.10.6.3.1.1].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_dcdc_DcDcCurrentValueEltek eNexus DcDc Current ValueampsMonitors the value of the measured total dcdc current.[SP2-MIB :: dcdcCurrentValue : 1.3.6.1.4.1.12148.10.6.3.1.5]
Eltek eNexus - DcDc Groupseltek_eNexus_dcdc_DcDcGroupStatusEltek eNexus DcDc Group StatusMonitors the overall status of dcdc group.[SP2-MIB :: dcdcGroupStatus : 1.3.6.1.4.1.12148.10.6.2.1.2].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_dcdc_DcDcGroupOutputVoltageEltek eNexus DcDc Group Output VoltagevMonitors the Output voltage of dcdc converters.[SP2-MIB :: dcdcGroupOutputVoltage : 1.3.6.1.4.1.12148.10.6.2.1.4]

Eltek eNexus - Error

Description

Eltek eNexus failure parameters like Mains Mains Failure Value,Rectifiers Error Value,Solar Chargers Error Value,Wind Chargers Error Value,Main Control Units Error Value,Smart Node Error Value,Battery Monitor Error Value,Load Monitor Error Value,Io Unit Error Value,Flexi Monitor Error Value,User Suspended Value,Inverters Error Value,Grid Inverters Error Value,Rectiverters Error Value,Rectiverters Error Value,Generator Mains Delay.[SP2-MIB :: mainsMainsFailureValue : 1.3.6.1.4.1.12148.10.3.2.5.0,rectifiersErrorValue : 1.3.6.1.4.1.12148.10.5.4.5.0,solarChargersErrorValue : 1.3.6.1.4.1.12148.10.7.4.5.0,windChargersErrorValue : 1.3.6.1.4.1.12148.10.8.4.5.0,mainControlUnitsErrorValue : 1.3.6.1.4.1.12148.10.13.12.1.5.0,smartNodeErrorValue : 1.3.6.1.4.1.12148.10.13.12.2.5.0,batteryMonitorErrorValue : 1.3.6.1.4.1.12148.10.13.12.3.5.0,loadMonitorErrorValue : 1.3.6.1.4.1.12148.10.13.12.4.5.0,ioUnitErrorValue : 1.3.6.1.4.1.12148.10.13.12.5.5.0,flexiMonitorErrorValue : 1.3.6.1.4.1.12148.10.13.12.7.5.0,userSuspendedValue : 1.3.6.1.4.1.12148.10.13.15.5.0,invertersErrorValue : 1.3.6.1.4.1.12148.10.16.2.5.0,gridInvertersErrorValue : 1.3.6.1.4.1.12148.10.17.2.5.0,rectivertersErrorValue : 1.3.6.1.4.1.12148.10.18.3.5.0,generatorDischargeValue : 1.3.6.1.4.1.12148.10.4.4.0,generatorMainsDelay : 1.3.6.1.4.1.12148.10.4.5.0].

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eltek eNexus - Failureseltek_eNexus_windchargers_WindChargersErrorValueEltek eNexus Wind Chargers Error ValuecountMonitors the number of failed wind chargers.[SP2-MIB :: windChargersErrorValue : 1.3.6.1.4.1.12148.10.8.4.5.0]
eltek_eNexus_user_UserSuspendedValueEltek eNexus User Suspended ValuecountMonitors the detected number of failed attempts.[SP2-MIB :: userSuspendedValue : 1.3.6.1.4.1.12148.10.13.15.5.0]
eltek_eNexus_battery_BatteryMonitorErrorValueEltek eNexus Battery Monitor Error ValuecountMonitors the detected number of failed battery monitors.[SP2-MIB :: batteryMonitorErrorValue : 1.3.6.1.4.1.12148.10.13.12.3.5.0]
eltek_eNexus_load_LoadMonitorErrorValueEltek eNexus Load Monitor Error ValuecountMonitors the detected number of failed load monitors.[SP2-MIB :: loadMonitorErrorValue : 1.3.6.1.4.1.12148.10.13.12.4.5.0]
eltek_eNexus_inverters_InvertersErrorValueEltek eNexus Inverters Error ValuecountMonitors the number of failed inverters.[SP2-MIB :: invertersErrorValue : 1.3.6.1.4.1.12148.10.16.2.5.0]
eltek_eNexus_generator_GeneratorDischargeValueEltek eNexus Generator Discharge Value%Monitors the present discharge value in percentage.[SP2-MIB :: generatorDischargeValue : 1.3.6.1.4.1.12148.10.4.4.0]
eltek_eNexus_fleximonitor_FlexiMonitorErrorValueEltek eNexus Flexi Monitor Error ValuecountMonitors the detected number of failed flexi monitors.[SP2-MIB :: flexiMonitorErrorValue : 1.3.6.1.4.1.12148.10.13.12.7.5.0]
eltek_eNexus_rectiverters_RectivertersErrorValueEltek eNexus Rectiverters Error ValuecountMonitors the number of failed rectifiers.[SP2-MIB :: rectivertersErrorValue : 1.3.6.1.4.1.12148.10.18.3.5.0]
eltek_eNexus_gridInverters_GridInvertersErrorValueEltek eNexus Grid Inverters Error ValuecountMonitors the number of failed inverters.[SP2-MIB :: gridInvertersErrorValue : 1.3.6.1.4.1.12148.10.17.2.5.0]
eltek_eNexus_solarchargers_SolarChargersErrorValueEltek eNexus Solar Chargers Error ValuecountMonitors the number of failed solar chargers.[SP2-MIB :: solarChargersErrorValue : 1.3.6.1.4.1.12148.10.7.4.5.0]
eltek_eNexus_mains_MainsMainsFailureValueEltek eNexus Mains Mains Failure ValuecountMonitors the detected number of failed phases.[SP2-MIB :: mainsMainsFailureValue : 1.3.6.1.4.1.12148.10.3.2.5.0]
eltek_eNexus_rectifiers_RectifiersErrorValueEltek eNexus Rectifiers Error ValuecountMonitors the number of failed rectifiers.[SP2-MIB :: rectifiersErrorValue : 1.3.6.1.4.1.12148.10.5.4.5.0]
eltek_eNexus_generator_GeneratorMainsDelayEltek eNexus Generator Mains DelaymMonitors the elapsing time of mains failure.[SP2-MIB :: generatorMainsDelay : 1.3.6.1.4.1.12148.10.4.5.0]
eltek_eNexus_smartnode_SmartNodeErrorValueEltek eNexus Smart Node Error ValuecountMonitors the detected number of failed smartnodes.[SP2-MIB :: smartNodeErrorValue : 1.3.6.1.4.1.12148.10.13.12.2.5.0]
eltek_eNexus_controlsystem_MainControlUnitsErrorValueEltek eNexus Main Control Units Error ValuecountMoniotrs the detected number of failed main controllers.[SP2-MIB :: mainControlUnitsErrorValue : 1.3.6.1.4.1.12148.10.13.12.1.5.0]
eltek_eNexus_io_IoUnitErrorValueEltek eNexus Io Unit Error ValuecountMonitors the detected number of failed IO units.[SP2-MIB :: ioUnitErrorValue : 1.3.6.1.4.1.12148.10.13.12.5.5.0]

Eltek eNexus - Gse Generator

Description

Monitors the Eltek eNexus gse generator parameters like Generator Oil Pressure,Generator Coolant Temperature,Generator Fuel Level,Generator Engine Battery Voltage,Generator Engine Speed,Generator Frequency,Generator Engine Run Time,Generator Mode,Generator High Temperature,Generator Low Oil Pressure,Generator Fuel Probe Fail,Generator Fuel Tank Level Low,Generator Fuel Tank Loss,Generator RMS Communication Failure.[SP2-MIB :: gseGeneratorOilPressure : 1.3.6.1.4.1.12148.10.4.26.1.0,gseGeneratorCoolantTemperature : 1.3.6.1.4.1.12148.10.4.26.2.0,gseGeneratorFuelLevel : 1.3.6.1.4.1.12148.10.4.26.3.0,gseGeneratorEngineBatteryVoltage : 1.3.6.1.4.1.12148.10.4.26.4.0,gseGeneratorEngineSpeed : 1.3.6.1.4.1.12148.10.4.26.5.0,gseGeneratorFrequency : 1.3.6.1.4.1.12148.10.4.26.6.0,gseGeneratorEngineRunTime : 1.3.6.1.4.1.12148.10.4.26.7.0,gseGeneratorMode : 1.3.6.1.4.1.12148.10.4.26.8.0,gseGeneratorHighTemperature : 1.3.6.1.4.1.12148.10.4.26.10.0,gseGeneratorLowOilPressure : 1.3.6.1.4.1.12148.10.4.26.11.0,gseGeneratorFuelProbeFail : 1.3.6.1.4.1.12148.10.4.26.12.0,gseGeneratorFuelTankLevelLow : 1.3.6.1.4.1.12148.10.4.26.13.0,gseGeneratorFuelTankLoss : 1.3.6.1.4.1.12148.10.4.26.14.0,gseGeneratorRMSCommunicationFailure : 1.3.6.1.4.1.12148.10.4.26.15.0].

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eltek eNexus - Gse Generatoreltek_eNexus_gsegenerator_GseGeneratorFuelTankLevelLoweltek_eNexus_gsegenerator_GseGeneratorFuelTankLevelLowMonitors the Eltek eNexus gse generator fuel tank level low.[SP2-MIB :: gseGeneratorFuelTankLevelLow : 1.3.6.1.4.1.12148.10.4.26.13.0]
eltek_eNexus_gsegenerator_GseGeneratorCoolantTemperatureEltek eNexus Gse Generator Coolant TemperatureFMonitors the Eltek eNexus gse generator Coolant temperature.[SP2-MIB :: gseGeneratorCoolantTemperature : 1.3.6.1.4.1.12148.10.4.26.2.0]
eltek_eNexus_gsegenerator_GseGeneratorEngineRunTimeEltek eNexus Gse Generator Engine Run TimesMonitors the Eltek eNexus gse generator engine run time in seconds.[SP2-MIB :: gseGeneratorEngineRunTime : 1.3.6.1.4.1.12148.10.4.26.7.0]
eltek_eNexus_gsegenerator_GseGeneratorEngineSpeedEltek eNexus Gse Generator Engine SpeedrpmMonitors Eltek eNexus gse generator engine speed in RPM.[SP2-MIB :: gseGeneratorEngineSpeed : 1.3.6.1.4.1.12148.10.4.26.5.0]
eltek_eNexus_gsegenerator_GseGeneratorEngineBatteryVoltageEltek eNexus Gse Generator Engine Battery VoltagevMonitors the Eltek eNexus gse generator engine battery voltage.[SP2-MIB :: gseGeneratorEngineBatteryVoltage : 1.3.6.1.4.1.12148.10.4.26.4.0]
eltek_eNexus_gsegenerator_GseGeneratorFuelTankLossEltek eNexus Gse Generator Fuel Tank LossMonitors the Eltek eNexus gse generator fuel tank loss.[SP2-MIB :: gseGeneratorFuelTankLoss : 1.3.6.1.4.1.12148.10.4.26.14.0].Possible values are disabledInput(0),notActiveAlarm(1),warningAlarm(2),shutdownAlarm(3),electricalTripAlarm(4),controlledShutdownAlarm(5),reserved1(6),reserved2(7),inactiveIndication1(8),inactiveIndication2(9),activeIndication(10),reserved3(11),unimplementedAlarm(12)
eltek_eNexus_gsegenerator_GseGeneratorFuelProbeFailEltek eNexus Gse Generator Fuel Probe FailMonitors the Eltek eNexus gse generator fuel probe fail.[SP2-MIB :: gseGeneratorFuelProbeFail : 1.3.6.1.4.1.12148.10.4.26.12.0].Possible values are disabledInput(0),notActiveAlarm(1),warningAlarm(2),shutdownAlarm(3),electricalTripAlarm(4),controlledShutdownAlarm(5),reserved1(6),reserved2(7),inactiveIndication1(8),inactiveIndication2(9),activeIndication(10),reserved3(11),unimplementedAlarm(12)
eltek_eNexus_gsegenerator_GseGeneratorRMSCommunicationFailureEltek eNexus Gse Generator RMS Communication FailureMonitors the Eltek eNexus gse generator RMS communication failure.[SP2-MIB :: gseGeneratorRMSCommunicationFailure : 1.3.6.1.4.1.12148.10.4.26.15.0].Possible values are disabledInput(0),notActiveAlarm(1),warningAlarm(2),shutdownAlarm(3),electricalTripAlarm(4),controlledShutdownAlarm(5),reserved1(6),reserved2(7),inactiveIndication1(8),inactiveIndication2(9),activeIndication(10),reserved3(11),unimplementedAlarm(12)
eltek_eNexus_gsegenerator_GseGeneratorModeEltek eNexus Gse Generator ModeMonitors the Eltek eNexus gse generator Auto/manual mode.[SP2-MIB :: gseGeneratorMode : 1.3.6.1.4.1.12148.10.4.26.8.0].Possible values are stop(0),auto(1),manual(2),testOnLoad(3),autoWithManualRestore(4),userConfigutation(5),off(6).
eltek_eNexus_gsegenerator_GseGeneratorOilPressureEltek eNexus Gse Generator Oil PressureMonitors the gse generator oil pressure in kpa.[SP2-MIB :: gseGeneratorOilPressure : 1.3.6.1.4.1.12148.10.4.26.1.0]
eltek_eNexus_gsegenerator_GseGeneratorFrequencyEltek eNexus Gse Generator FrequencyHzMonitors Eltek eNexus gse generator frequency in Hz.[SP2-MIB :: gseGeneratorFrequency : 1.3.6.1.4.1.12148.10.4.26.6.0]
eltek_eNexus_gsegenerator_GseGeneratorHighTemperatureEltek eNexus Gse Generator High TemperatureMonitors the Eltek eNexus gse generator high temperature.[SP2-MIB :: gseGeneratorHighTemperature : 1.3.6.1.4.1.12148.10.4.26.10.0].Possible values are disabledInput(0),notActiveAlarm(1),warningAlarm(2),shutdownAlarm(3),electricalTripAlarm(4),controlledShutdownAlarm(5),reserved1(6),reserved2(7),inactiveIndication1(8),inactiveIndication2(9),activeIndication(10),reserved3(11),unimplementedAlarm(12)
eltek_eNexus_gsegenerator_GseGeneratorLowOilPressureEltek eNexus Gse Generator Low Oil PressureMonitors the Eltek eNexus Gse generator low oil pressure.[SP2-MIB :: gseGeneratorLowOilPressure : 1.3.6.1.4.1.12148.10.4.26.11.0].Possible values are disabledInput(0),notActiveAlarm(1),warningAlarm(2),shutdownAlarm(3),electricalTripAlarm(4),controlledShutdownAlarm(5),reserved1(6),reserved2(7),inactiveIndication1(8),inactiveIndication2(9),activeIndication(10),reserved3(11),unimplementedAlarm(12)
eltek_eNexus_gsegenerator_GseGeneratorFuelLevelEltek eNexus Gse Generator Fuel Level%Monitors the Gse generator fuel level.[SP2-MIB :: gseGeneratorFuelLevel : 1.3.6.1.4.1.12148.10.4.26.3.0]

Eltek eNexus - Hardware Status

Description

Monitors the Eltek eNexus hardware status parameters like Power System Status,Mains Status,Generator Status,Generator Failure Status,Rectifiers Status,Solar Chargers Status,Wind Chargers Status,Load Status,Load Fuses Status,Battery Status,Battery Fuses Status,Battery Quality Status,Battery LVBD Status,Battery Ah Charged Status,Battery Ah Discharged Status,Control System Status,Smart Node Error Status,Battery Monitor Error Status,Load Monitor Error Status,Io Unit Error Status,Mains Monitor Error Status,Flexi Monitor Error Status,Ambient Temperature Status,DeltaTemperatureStatus,User Suspended Status,Battery Group2 Status,Battery Group2 Ah Charged Status,Battery Group2 Ah Discharged Status,Inverters Status,Grid Inverters Status,Rectiverters Status.[SP2-MIB :: powerSystemStatus : 1.3.6.1.4.1.12148.10.2.1.0,mainsStatus : 1.3.6.1.4.1.12148.10.3.1.0,generatorStatus : 1.3.6.1.4.1.12148.10.4.1.0,generatorFailStatus : 1.3.6.1.4.1.12148.10.4.2.0,rectifiersStatus : 1.3.6.1.4.1.12148.10.5.1.0,solarChargersStatus : 1.3.6.1.4.1.12148.10.7.1.0,windChargersStatus : 1.3.6.1.4.1.12148.10.8.1.0,loadStatus : 1.3.6.1.4.1.12148.10.9.1.0,loadFusesStatus : 1.3.6.1.4.1.12148.10.9.3.0,batteryStatus : 1.3.6.1.4.1.12148.10.10.1.0,batteryFusesStatus : 1.3.6.1.4.1.12148.10.10.4.0,batteryQualityStatus : 1.3.6.1.4.1.12148.10.10.12.1.0,batteryLVBDStatus : 1.3.6.1.4.1.12148.10.10.13.1.0,batteryAhChargedStatus : 1.3.6.1.4.1.12148.10.10.23.1.0,batteryAhDischargedStatus : 1.3.6.1.4.1.12148.10.10.24.1.0,controlSystemStatus : 1.3.6.1.4.1.12148.10.13.1.0,smartNodeErrorStatus : 1.3.6.1.4.1.12148.10.13.12.2.1.0,batteryMonitorErrorStatus : 1.3.6.1.4.1.12148.10.13.12.3.1.0,loadMonitorErrorStatus : 1.3.6.1.4.1.12148.10.13.12.4.1.0,ioUnitErrorStatus : 1.3.6.1.4.1.12148.10.13.12.5.1.0,mainsMonitorErrorStatus : 1.3.6.1.4.1.12148.10.13.12.6.1.0,flexiMonitorErrorStatus : 1.3.6.1.4.1.12148.10.13.12.7.1.0,ambientTemperatureStatus : 1.3.6.1.4.1.12148.10.13.13.1.0,deltaTemperatureStatus : 1.3.6.1.4.1.12148.10.13.14.1.0,userSuspendedStatus : 1.3.6.1.4.1.12148.10.13.15.1.0,batteryGroup2Status : 1.3.6.1.4.1.12148.10.15.1.0,batteryGroup2AhChargedStatus : 1.3.6.1.4.1.12148.10.15.22.1.0,batteryGroup2AhDischargedStatus : 1.3.6.1.4.1.12148.10.15.23.1.0,invertersStatus : 1.3.6.1.4.1.12148.10.16.1.0,gridInvertersStatus : 1.3.6.1.4.1.12148.10.17.1.0,rectivertersStatus : 1.3.6.1.4.1.12148.10.18.1.0]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eltek eNexus - Hardware Statuseltek_eNexus_load_LoadFusesStatusEltek eNexus Load Fuses StatusMonitors the overall status of the load fuses.[SP2-MIB :: loadFusesStatus : 1.3.6.1.4.1.12148.10.9.3.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_mainsMainsFailure_MainsMainsFailureStatusEltek eNexus Mains Mains Failure StatusIt displays if the number of failed phases is higher than the defined alarm level.[SP2-MIB :: mainsMainsFailureStatus : 1.3.6.1.4.1.12148.10.3.2.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_ioUnitError_IoUnitErrorStatusEltek eNexus Io Unit Error StatusMonitors the status value shows if the number of failed IO units is higher than the defined alarm level.[SP2-MIB :: ioUnitErrorStatus : 1.3.6.1.4.1.12148.10.13.12.5.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_rectiverters_RectivertersStatusEltek eNexus Rectiverters StatusMonitors the overall status of rectifier subsystem.[SP2-MIB :: rectivertersStatus : 1.3.6.1.4.1.12148.10.18.1.0]. Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_batteryGroup2AhDischarged_BatteryGroup2AhDischargedStatusEltek eNexus Battery Group2 Ah Discharged StatusMonitors the status of the battery ah discharged monitor.[SP2-MIB :: batteryGroup2AhDischargedStatus : 1.3.6.1.4.1.12148.10.15.23.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_generator_GeneratorStatusEltek eNexus Generator StatusMonitors the overall status of generator subsystem.[SP2-MIB :: generatorStatus : 1.3.6.1.4.1.12148.10.4.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_battery_BatteryLVBDStatusEltek eNexus Battery LVBD StatusMonitors the battery contactor is connected,disconnected,disabled or in any other alarm condition.[SP2-MIB :: batteryLVBDStatus : 1.3.6.1.4.1.12148.10.10.13.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_battery_BatteryAhDischargedStatusEltek eNexus Battery Ah Discharged StatusMonitors the status of the battery ah discharged monitor.[SP2-MIB :: batteryAhDischargedStatus : 1.3.6.1.4.1.12148.10.10.24.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_battery_BatteryAhChargedStatusEltek eNexus Battery Ah Charged StatusMonitors the status of the battery ah charged monitor.[SP2-MIB :: batteryAhChargedStatus : 1.3.6.1.4.1.12148.10.10.23.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_solarchargers_SolarChargersStatusEltek eNexus Solar Chargers StatusMonitors the overall status of solar charger subsystem.[SP2-MIB :: solarChargersStatus : 1.3.6.1.4.1.12148.10.7.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_batteryMonitorError_BatteryMonitorErrorStatusEltek eNexus Battery Monitor Error StatusMonitors the status value shows if the number of failed battery monitors is higher than the defined alarm level.[SP2-MIB :: batteryMonitorErrorStatus : 1.3.6.1.4.1.12148.10.13.12.3.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_flexiMonitorError_FlexiMonitorErrorStatusEltek eNexus Flexi Monitor Error StatusMonitors the status value shows if the number of failed flexi monitors is higher than the defined alarm level.[SP2-MIB :: flexiMonitorErrorStatus : 1.3.6.1.4.1.12148.10.13.12.7.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_mains_MainsStatusEltek eNexus Mains StatusMonitors the overall status of mains/AC feed subsystem.[SP2-MIB :: mainsStatus : 1.3.6.1.4.1.12148.10.3.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_mainsMonitorError_MainsMonitorErrorStatusEltek eNexus Mains Monitor Error StatusMonitors the status value shows if the number of failed mains monitors is higher than the defined alarm level.[SP2-MIB :: mainsMonitorErrorStatus : 1.3.6.1.4.1.12148.10.13.12.6.1.0]possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_battery_BatteryFusesStatusEltek eNexus Battery Fuses StatusMonitors the state of the battery fuses/breakers.[SP2-MIB :: batteryFusesStatus : 1.3.6.1.4.1.12148.10.10.4.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_userSuspended_UserSuspendedStatusEltek eNexus User Suspended StatusMonitors the status value shows if the number of failed attempts is higher than the defined alarm level.[SP2-MIB :: userSuspendedStatus : 1.3.6.1.4.1.12148.10.13.15.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_batteryGroup2AhCharged_BatteryGroup2AhChargedStatusEltek eNexus Battery Group2 Ah Charged StatusMonitors the status of the battery ah charged monitor.[SP2-MIB :: batteryGroup2AhChargedStatus : 1.3.6.1.4.1.12148.10.15.22.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_gridInverters_GridInvertersStatusEltek eNexus Grid Inverters StatusMonitors the overall status of inverter subsystem.[SP2-MIB :: gridInvertersStatus : 1.3.6.1.4.1.12148.10.17.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_deltaTemperature_DeltaTemperatureStatusEltek eNexus Delta Temperature StatusMonitors the state of the delta temperature can be either one of the defined enumerated values.[SP2-MIB :: deltaTemperatureStatus : 1.3.6.1.4.1.12148.10.13.14.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_batteryGroup2_BatteryGroup2StatusEltek eNexus Battery Group2 StatusMonitors the toplevel status for the battery group 2.[SP2-MIB :: batteryGroup2Status : 1.3.6.1.4.1.12148.10.15.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_inverters_InvertersStatusEltek eNexus Inverters StatusMonitors the overall status of inverter subsystem.[SP2-MIB :: invertersStatus : 1.3.6.1.4.1.12148.10.16.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_battery_BatteryStatusEltek eNexus Battery StatusMonitors the top-level status for the battery subsystem.[SP2-MIB :: batteryStatus : 1.3.6.1.4.1.12148.10.10.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_ambientTemperature_AmbientTemperatureStatusEltek eNexus Ambient Temperature StatusMonitors the state of the ambient temperature can be either one of the defined enumerated values.[SP2-MIB :: ambientTemperatureStatus : 1.3.6.1.4.1.12148.10.13.13.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_powersystem_PowerSystemStatusEltek eNexus Power System StatusMonitors the overall condition of the power system.[SP2-MIB :: powerSystemStatus : 1.3.6.1.4.1.12148.10.2.1].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_controlSystem_ControlSystemStatusEltek eNexus Control System StatusMonitors the overall status of control system subsystem.[SP2-MIB :: controlSystemStatus : 1.3.6.1.4.1.12148.10.13.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_load_LoadStatusEltek eNexus Load StatusMonitors the overall status of load subsystem.[SP2-MIB :: loadStatus : 1.3.6.1.4.1.12148.10.9.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_smartNodeError_SmartNodeErrorStatusEltek eNexus Smart Node Error StatusMonitor the status value shows if the number of failed smartnodes is higher than the defined alarm level.[SP2-MIB :: smartNodeErrorStatus : 1.3.6.1.4.1.12148.10.13.12.2.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_loadMonitorError_LoadMonitorErrorStatusEltek eNexus Load Monitor Error StatusMonitor status value shows if the number of failed load monitors is higher than the defined alarm level.[SP2-MIB :: bloadMonitorErrorStatus : 1.3.6.1.4.1.12148.10.13.12.4.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_generator_GeneratorFailStatusEltek eNexus Generator Failure StatusMonitors the status of generator failure monitor.[SP2-MIB :: generatorFailStatus : 1.3.6.1.4.1.12148.10.4.2.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_rectifiers_RectifiersStatusEltek eNexus Rectifiers StatusMonitors the overall status of rectifier subsystem.[SP2-MIB :: grectifiersStatus : 1.3.6.1.4.1.12148.10.5.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19) .
eltek_eNexus_windChargers_WindChargersStatusEltek eNexus Wind Chargers StatusMonitors the overall status of wind charger subsystem.[SP2-MIB :: windChargersStatus : 1.3.6.1.4.1.12148.10.8.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_battery_BatteryQualityStatusEltek eNexus Battery Quality StatusMonitors the status of the battery quality (SoH) monitor.[SP2-MIB :: batteryQualityStatus : 1.3.6.1.4.1.12148.10.10.12.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).

Eltek eNexus - Input

Description

Monitors the Eltek eNexus input control unit input parameters like Input Control Unit Input Status,Input Control Unit Input Value,inputs available in controller,inputs available in IO unit.[SP2-MIB :: inputControlUnitInputStatus : 1.3.6.1.4.1.12148.10.11.2.1.2,inputControlUnitInputValue : 1.3.6.1.4.1.12148.10.11.2.1.6,inputControlUnitNumberOfInputs : 1.3.6.1.4.1.12148.10.11.1.1.2,inputIoUnitNumberOfInputs : 1.3.6.1.4.1.12148.10.11.3.1.2].

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eltek eNexus - Input Control Unit Inputeltek_eNexus_Inputs_InputControlUnitInputStatusEltek eNexus Input Control Unit Input StatusMonitors the programmable input status.[SP2-MIB :: inputControlUnitInputStatus : 1.3.6.1.4.1.12148.10.11.2.1.2]. Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_Inputs_InputControlUnitInputValueEltek eNexus Input Control Unit Input ValueMonitors the inputs measured Value.[SP2-MIB :: inputControlUnitInputValue : 1.3.6.1.4.1.12148.10.11.2.1.6]
Eltek eNexus - Input Control Unitseltek_eNexus_Inputs_InputControlUnitNumberOfInputsEltek eNexus Input Control Unit Number Of InputscountMonitors the number of programmable inputs available in controller.[SP2-MIB :: inputControlUnitNumberOfInputs : 1.3.6.1.4.1.12148.10.11.1.1.2].
Eltek eNexus - Input IOeltek_eNexus_Inputs_InputIoUnitNumberOfInputsEltek eNexus Input Io Unit Number Of InputscountMonitors the number of programmable inputs available in IO unit.[SP2-MIB :: inputIoUnitNumberOfInputs : 1.3.6.1.4.1.12148.10.11.3.1.2].

Eltek eNexus - Inverters

Description

Monitors the grid inverters parameters like Grid Inverters Error Status,Grid Inverters Temperature Status,Grid Inverters Temperature Value,Grid Inverters Ac Current1 Status,Grid Inverters Ac Current1 Value,Grid Inverters Ac Current2 Status,Grid Inverters Ac Current2 Value,Grid Inverters Ac Current3 Status,Grid Inverters Ac Current3 Value,Grid Inverters Power Status,Grid Inverters Power Value,Grid Inverters Frequency Status,Grid Inverters Frequency Value,Grid Inverters Ac Disconnect Status,Eltek eNexus Grid Inverters Ac Disconnect Value,Grid Inverters Dc Current,Grid Inverters Ac Voltage1,Grid Inverters Ac Voltage2,Grid Inverters Ac Voltage3,Inverters Error Status,Inverters Temperature Status,Inverters Temperature Value,Inverters Ac Current1 Status,Inverters Ac Current1 Value,Inverters Ac Current2 Status,Inverters Ac Current2 Value,Inverters Ac Current3 Status,Inverters Ac Current3 Value,Inverters Ac Voltage1 Status,Inverters Ac Voltage1 Value,Inverters Ac Voltage2 Status,Inverters Ac Voltage2 Value,Inverters Ac Voltage3 Status,Inverters Ac Voltage3 Value,Inverters Ac Frequency Deviation Status,Inverters Ac Frequency Deviation Value,Eltek eNexus Inverters Ac Frequency.[SP2-MIB :: gridInvertersErrorStatus : 1.3.6.1.4.1.12148.10.17.2.1.0,gridInvertersTemperatureStatus : 1.3.6.1.4.1.12148.10.17.3.1.0,gridInvertersTemperatureValue : 1.3.6.1.4.1.12148.10.17.3.5.0,gridInvertersAcCurrent1Status : 1.3.6.1.4.1.12148.10.17.4.1.0,gridInvertersAcCurrent1Value : 1.3.6.1.4.1.12148.10.17.4.5.0,gridInvertersAcCurrent2Status : 1.3.6.1.4.1.12148.10.17.5.1.0,gridInvertersAcCurrent2Value : 1.3.6.1.4.1.12148.10.17.5.5.0,gridInvertersAcCurrent3Status : 1.3.6.1.4.1.12148.10.17.6.1.0,gridInvertersAcCurrent3Value : 1.3.6.1.4.1.12148.10.17.6.5.0,gridInvertersPowerStatus : 1.3.6.1.4.1.12148.10.17.7.1.0,gridInvertersPowerValue : 1.3.6.1.4.1.12148.10.17.7.5.0,gridInvertersFrequencyStatus : 1.3.6.1.4.1.12148.10.17.8.1.0,gridInvertersFrequencyValue : 1.3.6.1.4.1.12148.10.17.8.5.0,gridInvertersAcDisconnectStatus : 1.3.6.1.4.1.12148.10.17.9.1.0,gridInvertersAcDisconnectValue : 1.3.6.1.4.1.12148.10.17.9.5.0,gridInvertersDcCurrent : 1.3.6.1.4.1.12148.10.17.10.0,gridInvertersAcVoltage1 : 1.3.6.1.4.1.12148.10.17.11.0,gridInvertersAcVoltage2 : 1.3.6.1.4.1.12148.10.17.12.0,gridInvertersAcVoltage3 : 1.3.6.1.4.1.12148.10.17.13.0,invertersErrorStatus : 1.3.6.1.4.1.12148.10.16.2.1.0,invertersTemperatureStatus : 1.3.6.1.4.1.12148.10.16.3.1.0,invertersTemperatureValue : 1.3.6.1.4.1.12148.10.16.3.5.0,invertersAcCurrent1Status : 1.3.6.1.4.1.12148.10.16.4.1.0,invertersAcCurrent1Value : 1.3.6.1.4.1.12148.10.16.4.5.0,invertersAcCurrent2Status : 1.3.6.1.4.1.12148.10.16.5.1.0,invertersAcCurrent2Value : 1.3.6.1.4.1.12148.10.16.5.5.0,invertersAcCurrent3Status : 1.3.6.1.4.1.12148.10.16.6.1.0,invertersAcCurrent3Value : 1.3.6.1.4.1.12148.10.16.6.5.0,invertersAcVoltage1Status : 1.3.6.1.4.1.12148.10.16.7.1.0,invertersAcVoltage1Value : 1.3.6.1.4.1.12148.10.16.7.5.0,invertersAcVoltage2Status : 1.3.6.1.4.1.12148.10.16.8.1.0,invertersAcVoltage2Value : 1.3.6.1.4.1.12148.10.16.8.5.0,invertersAcVoltage3Status : 1.3.6.1.4.1.12148.10.16.9.1.0,invertersAcVoltage3Value : 1.3.6.1.4.1.12148.10.16.9.5.0,invertersAcFrequencyDeviationStatus : 1.3.6.1.4.1.12148.10.16.10.1.0,invertersAcFrequencyDeviationValue : 1.3.6.1.4.1.12148.10.16.10.5.0,invertersAcFrequency : 1.3.6.1.4.1.12148.10.16.11.0].

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eltek eNexus - Grid Inverterseltek_eNexus_GridInvertersAcDisconnectValueEltek eNexus Grid Inverters Ac Disconnect ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: gridInvertersAcDisconnectValue : 1.3.6.1.4.1.12148.10.17.9.5.0]
eltek_eNexus_GridInvertersAcCurrent3ValueEltek eNexus Grid Inverters Ac Current3 ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: gridInvertersAcCurrent3Value : 1.3.6.1.4.1.12148.10.17.6.5.0]
eltek_eNexus_GridInvertersAcCurrent3StatusEltek eNexus Grid Inverters Ac Current3 StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: gridInvertersAcCurrent3Status : 1.3.6.1.4.1.12148.10.17.6.1.0]
eltek_eNexus_GridInvertersAcCurrent1StatusEltek eNexus Grid Inverters Ac Current1 StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: gridInvertersAcCurrent1Status : 1.3.6.1.4.1.12148.10.17.4.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19) .
eltek_eNexus_GridInvertersPowerStatusEltek eNexus Grid Inverters Power Statusmonitors the status of the measured total inverter power.[SP2-MIB :: gridInvertersPowerStatus : 1.3.6.1.4.1.12148.10.17.7.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_GridInvertersErrorStatusEltek eNexus Grid Inverters Error StatusMonitors the Eltek eNexus grid inverters error status.[SP2-MIB :: gridInvertersErrorStatus : 1.3.6.1.4.1.12148.10.17.2.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_GridInvertersFrequencyStatusEltek eNexus Grid Inverters Frequency StatusMonitors the status of the measured total inverter power.[SP2-MIB :: gridInvertersFrequencyStatus : 1.3.6.1.4.1.12148.10.17.8.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_GridInvertersFrequencyValueEltek eNexus Grid Inverters Frequency ValueampsMonitors the value of the measured total inverter current.[SP2-MIB :: gridInvertersFrequencyValue : 1.3.6.1.4.1.12148.10.17.8.5.0].
eltek_eNexus_GridInvertersAcVoltage1Eltek eNexus Grid Inverters Ac Voltage1ampsMonitors the total installed/available inverter power.[SP2-MIB :: gridInvertersAcVoltage1 : 1.3.6.1.4.1.12148.10.17.11.0]
eltek_eNexus_GridInvertersAcCurrent2ValueEltek eNexus Grid Inverters Ac Current2 ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: [SP2-MIB :: gridInvertersAcCurrent2Value : 1.3.6.1.4.1.12148.10.17.5.5.0]
eltek_eNexus_GridInvertersAcVoltage2Eltek eNexus Grid Inverters Ac Voltage2ampsMonitors the total installed/available inverter power.[SP2-MIB :: gridInvertersAcVoltage2 : 1.3.6.1.4.1.12148.10.17.12.0]
eltek_eNexus_GridInvertersAcCurrent2StatusEltek eNexus Grid Inverters Ac Current2 StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: gridInvertersAcCurrent2Status : 1.3.6.1.4.1.12148.10.17.5.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_GridInvertersDcCurrentEltek eNexus Grid Inverters Dc CurrentampsMonitors the total installed/available inverter power.[SP2-MIB :: gridInvertersDcCurrent : 1.3.6.1.4.1.12148.10.17.10.0]
eltek_eNexus_GridInvertersAcVoltage3Eltek eNexus Grid Inverters Ac Voltage3ampsMonitors the total installed/available inverter power.[SP2-MIB :: gridInvertersAcVoltage3 : 1.3.6.1.4.1.12148.10.17.13.0]
eltek_eNexus_GridInvertersPowerValueEltek eNexus Grid Inverters Power ValueampsMonitors the value of the measured total inverter current.[SP2-MIB :: gridInvertersPowerValue : 1.3.6.1.4.1.12148.10.17.7.5.0]
eltek_eNexus_GridInvertersTemperatureStatusEltek eNexus Grid Inverters Temperature StatusMonitors the state of the rectifier temperature.[SP2-MIB :: gridInvertersTemperatureStatus : 1.3.6.1.4.1.12148.10.17.3.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_GridInvertersAcDisconnectStatusEltek eNexus Grid Inverters Ac Disconnect StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: gridInvertersAcDisconnectStatus : 1.3.6.1.4.1.12148.10.17.9.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_GridInvertersAcCurrent1ValueEltek eNexus Grid Inverters Ac Current1 ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: gridInvertersAcCurrent1Value : 1.3.6.1.4.1.12148.10.17.4.5.0]
eltek_eNexus_GridInvertersTemperatureValueEltek eNexus Grid Inverters Temperature ValueFmonitors the highest value of the rectifier temperature measurements.[SP2-MIB :: gridInvertersTemperatureValue : 1.3.6.1.4.1.12148.10.17.3.5.0]
Eltek eNexus - Inverterseltek_eNexus_InvertersAcCurrent3ValueEltek eNexus Inverters Ac Current3 ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: invertersAcCurrent3Value : 1.3.6.1.4.1.12148.10.16.6.5.0]
eltek_eNexus_InvertersTemperatureValueEltek eNexus Inverters Temperature ValueFMonitors the highest value of the rectifier temperature measurements.[SP2-MIB :: invertersTemperatureValue : 1.3.6.1.4.1.12148.10.16.3.5.0].
eltek_eNexus_InvertersAcCurrent2StatusEltek eNexus Inverters Ac Current2 StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: invertersAcCurrent2Status : 1.3.6.1.4.1.12148.10.16.5.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_InvertersAcFrequencyDeviationStatusEltek eNexus Inverters Ac Frequency Deviation StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: invertersAcFrequencyDeviationStatus : 1.3.6.1.4.1.12148.10.16.10.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_InvertersTemperatureStatusEltek eNexus Inverters Temperature StatusMonitors the state of the rectifier temperature.[SP2-MIB :: invertersTemperatureStatus : 1.3.6.1.4.1.12148.10.16.3.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_InvertersAcVoltage1StatusEltek eNexus Inverters Ac Voltage1 StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: invertersAcVoltage1Status : 1.3.6.1.4.1.12148.10.16.7.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_InvertersAcVoltage3ValueEltek eNexus Inverters Ac Voltage3 ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: invertersAcVoltage3Value : 1.3.6.1.4.1.12148.10.16.9.5.0]
eltek_eNexus_InvertersAcCurrent1ValueEltek eNexus Inverters Ac Current1 ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: invertersAcCurrent1Value : 1.3.6.1.4.1.12148.10.16.4.5.0]
eltek_eNexus_InvertersErrorStatusEltek eNexus Inverters Error StatusMonitors the Inverters error status.[SP2-MIB :: invertersErrorStatus : 1.3.6.1.4.1.12148.10.16.2.1.0].
eltek_eNexus_InvertersAcVoltage3StatusEltek eNexus Inverters Ac Voltage3 StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: invertersAcVoltage3Status : 1.3.6.1.4.1.12148.10.16.9.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_InvertersAcFrequencyEltek eNexus Inverters Ac FrequencyHzMonitors the Inverters Ac frequency.[SP2-MIB :: invertersAcFrequency : 1.3.6.1.4.1.12148.10.16.11.0]
eltek_eNexus_InvertersAcCurrent2ValueEltek eNexus Inverters Ac Current2 ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: invertersAcCurrent2Value : 1.3.6.1.4.1.12148.10.16.5.5.0]
eltek_eNexus_InvertersAcCurrent1StatusEltek eNexus Inverters Ac Current1 StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: invertersAcCurrent1Status : 1.3.6.1.4.1.12148.10.16.4.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_InvertersAcVoltage1ValueEltek eNexus Inverters Ac Voltage1 ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: invertersAcVoltage1Value : 1.3.6.1.4.1.12148.10.16.7.5.0]
eltek_eNexus_InvertersAcVoltage2ValueEltek eNexus Inverters Ac Voltage2 ValueampsMonitors the value of the measured total rectifier current.SP2-MIB :: invertersAcVoltage2Value : 1.3.6.1.4.1.12148.10.16.8.5.0]
eltek_eNexus_InvertersAcVoltage2StatusEltek eNexus Inverters Ac Voltage2 StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: invertersAcVoltage2Status : 1.3.6.1.4.1.12148.10.16.8.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_InvertersAcFrequencyDeviationValueEltek eNexus Inverters Ac Frequency Deviation ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: invertersAcFrequencyDeviationValue : 1.3.6.1.4.1.12148.10.16.10.5.0]
eltek_eNexus_InvertersAcCurrent3StatusEltek eNexus Inverters Ac Current3 StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: invertersAcCurrent3Status : 1.3.6.1.4.1.12148.10.16.6.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).

Eltek eNexus - Load

Description

Monitors the Eltek eNexus load parameters like Load Current Status,Load Current Value,Load Fuse Status,Load Fuse Value,status of load group,Load LVLD Status,Load LVLD Value,Load Voltage Status,Load Voltage Value.[SP2-MIB :: loadCurrentStatus : 1.3.6.1.4.1.12148.10.9.2.1.0,loadCurrentValue : 1.3.6.1.4.1.12148.10.9.2.5.0,loadFuseStatus : 1.3.6.1.4.1.12148.10.9.7.1.1,loadFuseValue : 1.3.6.1.4.1.12148.10.9.7.1.5,loadGroupStatus : 1.3.6.1.4.1.12148.10.9.5.1.2,loadLVLDStatus : 1.3.6.1.4.1.12148.10.9.6.1.2,loadLVLDValue : 1.3.6.1.4.1.12148.10.9.6.1.6,loadVoltageStatus : 1.3.6.1.4.1.12148.10.9.9.1.2,loadVoltageValue : 1.3.6.1.4.1.12148.10.9.9.1.6].

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eltek eNexus - Loadeltek_eNexus_load_LoadCurrentValueEltek eNexus Load Current ValueampsMonitors the value of the measured load current.[SP2-MIB :: loadCurrentValue : 1.3.6.1.4.1.12148.10.9.2.5.0]
eltek_eNexus_load_LoadCurrentStatusEltek eNexus Load Current StatusMonitors the status of the measured load current.[SP2-MIB :: loadCurrentStatus : 1.3.6.1.4.1.12148.10.9.2.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
Eltek eNexus - Load Fuseeltek_eNexus_load_LoadFuseValueEltek eNexus Load Fuse ValueampsMonitors the measured value of the load fuse.[SP2-MIB :: loadFuseValue : 1.3.6.1.4.1.12148.10.9.7.1.5]
eltek_eNexus_load_LoadFuseStatusEltek eNexus Load Fuse StatusMonitors the status of load fuse.[SP2-MIB :: loadFuseStatus : 1.3.6.1.4.1.12148.10.9.7.1.1].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
Eltek eNexus - Load Group Statuseltek_eNexus_load_LoadGroupStatusEltek eNexus Load Group StatusMonitors the status of load group.[SP2-MIB :: loadGroupStatus : 1.3.6.1.4.1.12148.10.9.5.1.2].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
Eltek eNexus - Load LVLDeltek_eNexus_load_LoadLVLDStatusEltek eNexus Load LVLD StatusMonitors status of LVLD.[SP2-MIB :: loadLVLDStatus : 1.3.6.1.4.1.12148.10.9.6.1.2]
eltek_eNexus_load_LoadLVLDValueEltek eNexus Load LVLD ValuevMonitors the measured value of the LVLD.[SP2-MIB :: loadLVLDValue : 1.3.6.1.4.1.12148.10.9.6.1.6]
Eltek eNexus - Load Voltageeltek_eNexus_load_LoadVoltageStatusEltek eNexus Load Voltage StatusMonitors the status of voltage.[SP2-MIB :: loadVoltageStatus : 1.3.6.1.4.1.12148.10.9.9.1.2]
eltek_eNexus_load_LoadVoltageValueEltek eNexus Load Voltage ValuevMonitors the measured value of the voltage.[SP2-MIB :: loadVoltageValue : 1.3.6.1.4.1.12148.10.9.9.1.6]

Eltek eNexus - Mains

Description

Monitors the Eltek eNexus mains parameters like Mains Monitor Frequency Status,Mains Monitor Frequency Value,Mains Monitor Voltage Status,Mains Monitor Voltage Value,Mains Voltage Status,Mains Voltage Value.[SP2-MIB :: mainsMonitorFrequencyStatus : 1.3.6.1.4.1.12148.10.3.5.5.1.1,mainsMonitorFrequencyValue : 1.3.6.1.4.1.12148.10.3.5.5.1.5,mainsMonitorVoltageStatus : 1.3.6.1.4.1.12148.10.3.5.3.1.2,mainsMonitorVoltageValue : 1.3.6.1.4.1.12148.10.3.5.3.1.6,mainsVoltageStatus : 1.3.6.1.4.1.12148.10.3.4.1.2,mainsVoltageValue : 1.3.6.1.4.1.12148.10.3.4.1.6]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eltek eNexus - Control Unit Statuseltek_eNexus_ControlUnitStatusEltek eNexus Control Unit StatusMonitors the textual description of the control unit.[SP2-MIB :: controlUnitStatus : 1.3.6.1.4.1.12148.10.13.8.2.1.3]. Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
Eltek eNexus - Main Control Unit Earth Faulteltek_eNexus_mainControlUnitEarthFaultStatusEltek eNexus Main Control Unit Earth Fault StatusMonitors the earth fault monitor.[SP2-MIB :: mainControlUnitEarthFaultStatus : 1.3.6.1.4.1.12148.10.13.11.3.1.1]
eltek_eNexus_mainControlUnitEarthFaultValueEltek eNexus Main Control Unit Earth Fault ValueKbpsMonitor the measured value of the earth resistance in kOhm..[SP2-MIB :: mainControlUnitEarthFaultValue : 1.3.6.1.4.1.12148.10.13.11.3.1.5].
Eltek eNexus - Main Control Unit Temperatureeltek_eNexus_mainControlUnitTemperatureValueEltek eNexus Main Control Unit Temperature ValueCelsiusMonitors the the measured battery temperature.[SP2-MIB :: mainControlUnitTemperatureValue : 1.3.6.1.4.1.12148.10.13.11.2.1.6]
eltek_eNexus_mainControlUnitTemperatureStatusEltek eNexus Main Control Unit Temperature StatusMonitors the status of battery temperature monitor.[SP2-MIB :: mainControlUnitTemperatureStatus : 1.3.6.1.4.1.12148.10.13.11.2.1.2].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
Eltek eNexus - Mains Monitor Frequencyeltek_eNexus_mainsmonitorcurrent_MainsMonitorFrequencyValueEltek eNexus Mains Monitor Frequency ValueHzMonitors the value of the measured mains frequency in AC Mains Monitor.[SP2-MIB :: mainsMonitorFrequencyValue : 1.3.6.1.4.1.12148.10.3.5.5.1.5]
eltek_eNexus_mainsmonitorcurrent_MainsMonitorFrequencyStatusEltek eNexus Mains Monitor Frequency StatusMonitors the status of the measured mains frequency in AC Mains Monitor.[SP2-MIB :: mainsMonitorFrequencyStatus : 1.3.6.1.4.1.12148.10.3.5.5.1.1].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19) .
Eltek eNexus - Mains Voltageeltek_eNexus_mainsvoltage_MainsVoltageStatusEltek eNexus Mains Voltage StatusMonitors the status of the measured mains voltage.[SP2-MIB :: mainsVoltageStatus : 1.3.6.1.4.1.12148.10.3.4.1.2].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_mainsvoltage_MainsVoltageValueEltek eNexus Mains Voltage ValuevMonitors the value of the measured mains voltage.[SP2-MIB :: mainsVoltageValue : 1.3.6.1.4.1.12148.10.3.4.1.6]

Eltek eNexus - Output

Description

Monitor the number of outputs available in controller,output control units status.[SP2-MIB :: outputControlUnitNumberOfOutputs : 1.3.6.1.4.1.12148.10.12.1.1.2,outputControlUnitOutputStatus : 1.3.6.1.4.1.12148.10.12.2.1.2]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eltek eNexus - Output Control Unitseltek_eNexus_Outputs_OutputControlUnitNumberOfOutputsEltek eNexus Output Control Unit Number Of OutputscountMonitor the number of outputs available in controller.[SP2-MIB :: outputControlUnitNumberOfOutputs : 1.3.6.1.4.1.12148.10.12.1.1.2]
Eltek eNexus - Output Control Units Statuseltek_eNexus_Outputs_OutputControlUnitOutputStatusEltek eNexus Output Control Unit Output StatusMonitors the Eltek eNexus output control units status.[SP2-MIB :: outputControlUnitOutputStatus : 1.3.6.1.4.1.12148.10.12.2.1.2]. Possible values are notenergized(0),energized(1),disconnected(2),connected(3).

Eltek eNexus - Rectifiers

Description

Monitors the Eltek eNexus rectifiers parameters like Rectifiers Current Status,Rectifiers Current Value,Rectifiers Capacity Status,Rectifiers Capacity Value,Rectifiers Error Status,Rectifiers Temperature Value,Rectifiers Temperature Status,Rectifier Status.[SP2-MIB :: rectifiersCurrentStatus : 1.3.6.1.4.1.12148.10.5.2.1.0,rectifiersCurrentValue : 1.3.6.1.4.1.12148.10.5.2.5.0,rectifiersCapacityStatus : 1.3.6.1.4.1.12148.10.5.3.1.0,rectifiersCapacityValue : 1.3.6.1.4.1.12148.10.5.3.5.0,rectifiersErrorStatus : 1.3.6.1.4.1.12148.10.5.4.1.0,rectifiersTemperatureValue : 1.3.6.1.4.1.12148.10.5.18.5.0,rectifiersTemperatureStatus : 1.3.6.1.4.1.12148.10.5.18.1.0,rectifierStatus : 1.3.6.1.4.1.12148.10.5.6.1.2,rectifierStatus : 1.3.6.1.4.1.12148.10.5.6.1.2]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eltek eNexus - Rectifierseltek_eNexus_rectifiers_RectifiersTemperatureStatusEltek eNexus Rectifiers Temperature StatusMonitors the state of the rectifier temperature can be either one of the defined enumerated values.[SP2-MIB :: rectifiersTemperatureStatus : 1.3.6.1.4.1.12148.10.5.18.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_rectifiers_RectifiersCapacityValueEltek eNexus Rectifiers Capacity Value%Monitors the used rectifier capacity value presented in percentage of the total installed rectifier capacity.[SP2-MIB :: rectifiersCapacityValue : 1.3.6.1.4.1.12148.10.5.3.5.0].
eltek_eNexus_rectifiers_RectifiersErrorStatusEltek eNexus Rectifiers Error StatusMonitors the status value shows if the number of failed units is higher than the defined alarm level.[SP2-MIB :: rectifiersErrorStatus : 1.3.6.1.4.1.12148.10.5.4.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_rectifiers_RectifiersCurrentStatusEltek eNexus Rectifiers Current StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: rectifiersCurrentStatus : 1.3.6.1.4.1.12148.10.5.2.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19) .
eltek_eNexus_rectifiers_RectifiersCurrentValueEltek eNexus Rectifiers Current ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: rectifiersCurrentValue : 1.3.6.1.4.1.12148.10.5.2.5.0]
eltek_eNexus_rectifiers_RectifiersCapacityStatusEltek eNexus Rectifiers Capacity StatusMonitors the status of the measured used rectifier capacity.[SP2-MIB :: rectifiersCapacityStatus : 1.3.6.1.4.1.12148.10.5.3.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_rectifiers_RectifiersTemperatureValueEltek eNexus Rectifiers Temperature ValueCelsiusMonitors the highest value of the rectifier temperature measurements.[SP2-MIB :: rectifiersTemperatureValue : 1.3.6.1.4.1.12148.10.5.18.5.0]
Eltek eNexus - Rectifiers Statuseltek_eNexus_rectifiers_RectifierStatusEltek eNexus Rectifier StatusMonitors the overall status of rectifier.[SP2-MIB :: rectifierStatus : 1.3.6.1.4.1.12148.10.5.6.1.2].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).

Eltek eNexus - Rectiverters

Description

Monitors the Eltek eNexus rectiverters parameters like Rectiverters Dc Current Status,Rectiverters Dc Current Value,Rectiverters Error Status,Rectiverters Temperature Status,Rectiverters Temperature Value,Rectiverters Ac Out Current1 Status,Rectiverters Ac Out Current1 Value,Rectiverters Ac Out Current2 Status,Rectiverters Ac Out Current2 Value,Rectiverters Ac Out Current3 Status,Rectiverters Ac Out Current3 Value,Rectiverters Ac Out Voltage1 Status,Rectiverters Ac Out Voltage1 Value,Rectiverters Ac Out Voltage2 Status,Rectiverters Ac Out Voltage2 Value,Rectiverters Ac Out Voltage3 Status,Rectiverters Ac Out Voltage3 Value,Rectiverters Ac Frequency Deviation Status,Rectiverters Ac Frequency Deviation Value,Rectiverters Ac Frequency.[SP2-MIB :: rectivertersDcCurrentStatus : 1.3.6.1.4.1.12148.10.18.2.1.0,rectivertersDcCurrentValue : 1.3.6.1.4.1.12148.10.18.2.5.0,rectivertersErrorStatus : 1.3.6.1.4.1.12148.10.18.3.1.0,rectivertersTemperatureStatus : 1.3.6.1.4.1.12148.10.18.4.1.0,rectivertersTemperatureValue : 1.3.6.1.4.1.12148.10.18.4.5.0,rectivertersAcOutCurrent1Status : 1.3.6.1.4.1.12148.10.18.5.1.0,rectivertersAcOutCurrent1Value : 1.3.6.1.4.1.12148.10.18.5.5.0,rectivertersAcOutCurrent2Status : 1.3.6.1.4.1.12148.10.18.6.1.0,rectivertersAcOutCurrent2Value : 1.3.6.1.4.1.12148.10.18.6.5.0,rectivertersAcOutCurrent3Status : 1.3.6.1.4.1.12148.10.18.7.1.0,rectivertersAcOutCurrent3Value : 1.3.6.1.4.1.12148.10.18.7.5.0,rectivertersAcOutVoltage1Status : 1.3.6.1.4.1.12148.10.18.8.1.0,rectivertersAcOutVoltage1Value : 1.3.6.1.4.1.12148.10.18.8.5.0,rectivertersAcOutVoltage2Status : 1.3.6.1.4.1.12148.10.18.9.1.0,rectivertersAcOutVoltage2Value : 1.3.6.1.4.1.12148.10.18.9.5.0,rectivertersAcOutVoltage3Status : 1.3.6.1.4.1.12148.10.18.10.1.0,rectivertersAcOutVoltage3Value : 1.3.6.1.4.1.12148.10.18.10.5.0,rectivertersAcFrequencyDeviationStatus : 1.3.6.1.4.1.12148.10.18.11.1.0,rectivertersAcFrequencyDeviationValue : 1.3.6.1.4.1.12148.10.18.11.5.0,rectivertersAcFrequency : 1.3.6.1.4.1.12148.10.18.12.0]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eltek eNexus - Rectiverterseltek_eNexus_RectivertersAcOutCurrent1ValueEltek eNexus Rectiverters Ac Out Current1 ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: rectivertersAcOutCurrent1Value : 1.3.6.1.4.1.12148.10.18.5.5.0].
eltek_eNexus_RectivertersDcCurrentValueEltek eNexus Rectiverters Dc Current ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: rectivertersDcCurrentValue : 1.3.6.1.4.1.12148.10.18.2.5.0].
eltek_eNexus_RectivertersAcOutVoltage3StatusEltek eNexus Rectiverters Ac Out Voltage3 StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: rectivertersAcOutVoltage3Status : 1.3.6.1.4.1.12148.10.18.10.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_RectivertersAcOutCurrent2ValueEltek eNexus Rectiverters Ac Out Current2 ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: rectivertersAcOutCurrent2Value : 1.3.6.1.4.1.12148.10.18.6.5.0]
eltek_eNexus_RectivertersAcOutCurrent3ValueEltek eNexus Rectiverters Ac Out Current3 ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: rectivertersAcOutCurrent3Value : 1.3.6.1.4.1.12148.10.18.7.5.0].
eltek_eNexus_RectivertersAcOutCurrent1StatusEltek eNexus Rectiverters Ac Out Current1 StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: rectivertersAcOutCurrent1Status : 1.3.6.1.4.1.12148.10.18.5.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_RectivertersErrorStatusEltek eNexus Rectiverters Error StatusMonitors the rectiverters error status.[SP2-MIB :: rectivertersErrorStatus : 1.3.6.1.4.1.12148.10.18.3.1.0]
eltek_eNexus_RectivertersTemperatureValueEltek eNexus Rectiverters Temperature ValueCelsiusMonitors the highest value of the rectifier temperature measurements.[SP2-MIB :: rectivertersTemperatureValue : 1.3.6.1.4.1.12148.10.18.4.5.0]
eltek_eNexus_RectivertersAcOutVoltage1StatusEltek eNexus Rectiverters Ac Out Voltage1 StatusMonitors the value of the measured total rectifier current.[SP2-MIB :: rectivertersAcOutVoltage1Status : 1.3.6.1.4.1.12148.10.18.8.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_RectivertersAcOutVoltage3ValueEltek eNexus Rectiverters Ac Out Voltage3 ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: rectivertersAcOutVoltage3Value : 1.3.6.1.4.1.12148.10.18.10.5.0]
eltek_eNexus_RectivertersAcOutCurrent2StatusEltek eNexus Rectiverters Ac Out Current2 StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: rectivertersAcOutCurrent2Status : 1.3.6.1.4.1.12148.10.18.6.1.0]
eltek_eNexus_RectivertersAcFrequencyDeviationValueEltek eNexus Rectiverters Ac Frequency Deviation ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: rectivertersAcFrequencyDeviationValue : 1.3.6.1.4.1.12148.10.18.11.5.0]
eltek_eNexus_RectivertersAcOutVoltage2StatusEltek eNexus Rectiverters Ac Out Voltage2 StatusMonitor the status of the measured total rectifier current.[SP2-MIB :: rectivertersAcOutVoltage2Status : 1.3.6.1.4.1.12148.10.18.9.1.0]
eltek_eNexus_RectivertersDcCurrentStatusEltek eNexus Rectiverters Dc Current StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: rectivertersDcCurrentStatus : 1.3.6.1.4.1.12148.10.18.2.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_RectivertersAcOutVoltage2ValueEltek eNexus Rectiverters Ac Out Voltage2 ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: rectivertersAcOutVoltage2Value : 1.3.6.1.4.1.12148.10.18.9.5.0]
eltek_eNexus_RectivertersAcOutVoltage1ValueEltek eNexus Rectiverters Ac Out Voltage1 ValueampsMonitors the value of the measured total rectifier current.[SP2-MIB :: rectivertersAcOutVoltage1Value : 1.3.6.1.4.1.12148.10.18.8.5.0]
eltek_eNexus_RectivertersAcFrequencyDeviationStatusEltek eNexus Rectiverters Ac Frequency Deviation StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: rectivertersAcFrequencyDeviationStatus : 1.3.6.1.4.1.12148.10.18.11.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_RectivertersAcFrequencyEltek eNexus Rectiverters Ac FrequencyHzMonitors the Eltek eNexus rectiverters Ac frequency.[SP2-MIB :: rectivertersAcFrequency : 1.3.6.1.4.1.12148.10.18.12.0].
eltek_eNexus_RectivertersAcOutCurrent3StatusEltek eNexus Rectiverters Ac Out Current3 StatusMonitors the status of the measured total rectifier current.[SP2-MIB :: rectivertersAcOutCurrent3Status : 1.3.6.1.4.1.12148.10.18.7.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).
eltek_eNexus_RectivertersTemperatureStatusEltek eNexus Rectiverters Temperature StatusMonitors the state of the rectifier temperature.[SP2-MIB :: rectivertersTemperatureStatus : 1.3.6.1.4.1.12148.10.18.4.1.0].Possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19).

Eltek eNexus - Solar Chargers

Description

Monitors the Eltek eNexus solar chargers parameters like Solar Chargers Current Status,Solar Chargers Error Status,Solar Chargers Current Value,Solar Chargers Earth Fault Status.[SP2-MIB :: solarChargersCurrentStatus : 1.3.6.1.4.1.12148.10.7.2.1.0,solarChargersErrorStatus : 1.3.6.1.4.1.12148.10.7.4.1.0,solarChargersCurrentValue : 1.3.6.1.4.1.12148.10.7.2.5.0,solarChargersEarthFaultStatus : 1.3.6.1.4.1.12148.10.7.8.0]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eltek eNexus - Solar Chargerseltek_eNexus_solarchargers_SolarChargersEarthFaultStatusEltek eNexus Solar Chargers Earth Fault StatusMonitors the status of solar charger's Earth Fault monitor.[SP2-MIB :: solarChargersEarthFaultStatus : 1.3.6.1.4.1.12148.10.7.8.0]
eltek_eNexus_solarchargers_SolarChargersCurrentStatusEltek eNexus Solar Chargers Current Statusmonitors the status of the measured total solar current.[SP2-MIB :: solarChargersCurrentStatus : 1.3.6.1.4.1.12148.10.7.2.1.0]
eltek_eNexus_solarchargers_SolarChargersErrorStatusEltek eNexus Solar Chargers Error StatusMonitors the status value shows if the number of failed units is higher than the defined alarm level.[SP2-MIB :: solarChargersErrorStatus : 1.3.6.1.4.1.12148.10.7.4.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_solarchargers_SolarChargersCurrentValueEltek eNexus Solar Chargers Current Valueampsmonitors the value of the measured total solar current.[SP2-MIB :: solarChargersCurrentValue : 1.3.6.1.4.1.12148.10.7.2.5.0]

Eltek eNexus - Wind Chargers

Description

Monitors the Eltek eNexus wind chargers parameters like Wind Chargers Current Status,Wind Chargers Current Value,Wind Chargers Error Status.[SP2-MIB :: windChargersCurrentStatus : 1.3.6.1.4.1.12148.10.8.2.1.0,windChargersCurrentValue : 1.3.6.1.4.1.12148.10.8.2.5.0,windChargersErrorStatus : 1.3.6.1.4.1.12148.10.8.4.1.0]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Eltek eNexus - WindChargerseltek_eNexus_windchargers_WindChargersErrorStatusEltek eNexus Wind Chargers Error StatusMonitors the status value shows if the number of failed units is higher than the defined alarm level.[SP2-MIB :: windChargersErrorStatus : 1.3.6.1.4.1.12148.10.8.4.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19)
eltek_eNexus_windchargers_WindChargersCurrentStatusEltek eNexus Wind Chargers Current StatusMonitors the status of the measured total wind current.[SP2-MIB :: windChargersCurrentStatus : 1.3.6.1.4.1.12148.10.8.2.1.0].possible values are error(0),normal(1),minorAlarm(2),majorAlarm(3),disabled(4),disconnected(5),notPresent(6),minorAndMajor(7),majorLow(8),minorLow(9),majorHigh(10),minorHigh(11),event(12),valueVolt(13),valueAmp(14),valueTemp(15),valueUnit(16),valuePerCent(17),critical(18),warning(19) .
eltek_eNexus_windchargers_WindChargersCurrentValueEltek eNexus Wind Chargers Current ValueampsMonitors the value of the measured total wind current.[SP2-MIB :: windChargersCurrentValue : 1.3.6.1.4.1.12148.10.8.2.5.0].

EMC RPA Cluster Performance

Description

EMC RPA Cluster Performance

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
EMC RPA Cluster Performance Monitorstorage.emcrpa.cluster.traffic.applicationthroughputstatistics.applicationincomingwritesEMCRPA Cluster Traffic Application IncomingWritesNULLEMCRPA Cluster Traffic Application IncomingWrites
storage.emcrpa.cluster.traffic.applicationthroughputstatistics.inthroughputEMCRPA Cluster Traffic Application InThroughputMbpsEMCRPA Cluster Traffic Application InThroughput
storage.emcrpa.cluster.traffic.connectionscompressionratio.compressionratioEMCRPA Cluster Traffic Connections CompressionRatioNULLEMCRPA Cluster Traffic Connections CompressionRatio
storage.emcrpa.cluster.traffic.initthroughputstatistics.connectionsoutthroughput.outthroughputEMCRPA Cluster Traffic Connection OutThroughputMbpsEMCRPA Cluster Traffic Connection OutThroughput
storage.emcrpa.cluster.traffic.initthroughputstatistics.inthroughputEMCRPA Cluster Traffice InThroughputMbpsEMCRPA Cluster Traffice InThroughput
storage.emcrpa.cluster.traffic.applicationthroughputstatistics.connectionsoutthroughputEMCRPA Cluster Traffic Connections OutThroughputMbpsEMCRPA Cluster Traffic Connections OutThroughput

EMC RPA Consistency Group Performance

Description

EMC RPA Consistency Group Performance

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
EMC RPA Consistency Group Performance Monitorstorage.emcrpa.consistencygroupcopystatistics.averageIncomingThroughputEMCRPA ConsistencyGroup Average IncomingThroughputMbpsEMCRPA ConsistencyGroup Average IncomingThroughput
storage.emcrpa.consistencygroupcopystatistics.averageincomingwritesEMCRPA ConsitencyGroup Average IncomingWritesNULLEMCRPA ConsitencyGroup Average IncomingWrites
storage.emcrpa.consistencygroupcopystatistics.incomingThroughputEMCRPA ConsistencyGroup IncomingThroughputMbpsEMCRPA ConsistencyGroup IncomingThroughput
storage.emcrpa.consistencygroupcopystatistics.incomingWritesEMCRPA ConsitencyGroup IncomingWritesNULLEMCRPA ConsitencyGroup IncomingWrites
storage.emcrpa.consistencygroupcopystatistics.journalstatistics.distributionfinishedEMCRPA ConsistencyGroup Distribution Finished StateNULLEMCRPA ConsistencyGroup Distribution Finished State
storage.emcrpa.consistencygroupcopystatistics.journalStatistics.imageAccessSizeLeftInBytesEMCRPA ConsistencyGroup Journal Image Access Size Left in BytesBytesEMCRPA ConsistencyGroup Journal Image Access Size Left in Bytes
storage.emcrpa.consistencygroupcopystatistics.journalstatistics.imageaccesstimeleftinsecondsEMCRPA ConsitencyGroup Image Access Time LeftsEMCRPA ConsitencyGroup Image Access Time Left
storage.emcrpa.consistencygroupcopystatistics.journalstatistics.imageaccesstotalsizeinbytesEMCRPA ConsistencyGroup Image Access Total SizeBytesEMCRPA ConsistencyGroup Image Access Total Size
storage.emcrpa.consistencygroupcopystatistics.journalstatistics.tspusagepercentageEMCRPA ConsistencyGroup Tsp Usage Percentage%EMCRPA ConsistencyGroup Tsp Usage Percentage
storage.emcrpa.consistencygroupcopystatistics.journalstatistics.tspusageinbytesEMCRPA ConsistencyGroup Tsp Usage in BytesBytesEMCRPA ConsistencyGroup Tsp Usage in Bytes
storage.emcrpa.consistencygroupcopystatistics.journalstatistics.journallaginbytesEMCRPA ConsistencyGroup Journal Lag in BytesBytesEMCRPA ConsistencyGroup Journal Lag in Bytes
storage.emcrpa.consistencygroupcopystatistics.journalstatistics.consolidationstatistics.savedSpaceEMCRPA ConsistencyGroup Journal SavedSpaceNULLEMCRPA ConsistencyGroup Journal SavedSpace
storage.emcrpa.consistencygroupcopystatistics.journal.consolidation.percentageOfSavedSpaceEMCRPA ConsitencyGroup Journal Consolidation SavedSpace Percentage%EMCRPA ConsitencyGroup Journal Consolidation SavedSpace Percentage
storage.emcrpa.consistencygroupcopystatistics.journalstatistics.fastforwardEMCRPA ConsitencyGroup Journal FastForword StateNULLEMCRPA ConsitencyGroup Journal FastForword State
storage.emcrpa.consistencygroupcopystatistics.journalstatistics.movingfrom.timeinmicrosecondsEMCRPA ConsistencyGroup Move From TimemicrosecEMCRPA ConsistencyGroup Move From Time
storage.emcrpa.consistencygroupcopystatistics.journalstatistics.movingto.timeinmicrosecondsEMCRPA ConsistencyGroup Move To TimemicrosecEMCRPA ConsistencyGroup Move To Time
storage.emcrpa.consistencygroupcopystatistics.journalstatistics.actualjournalsizeinbytesEMCRPA ConsitencyGroup Actual JournalSize in BytesBytesEMCRPA ConsitencyGroup Actual JournalSize in Bytes
storage.emcrpa.consistencygroupcopystatistics.journalstatistics.actualjournalusageinbytesEMCRPA ConsistencyGroup Actual Journal Usage in BytesBytesEMCRPA ConsistencyGroup Actual Journal Usage in Bytes
storage.emcrpa.consistencygrouplinkstatistics.initstatistics.initcompletionportionEMCRPA ConsistencyGroup Init Completion PortionNULLEMCRPA ConsistencyGroup Init Completion Portion
storage.emcrpa.consistencygrouplinkstatistics.initstatistics.initincomingthroughputEMCRPA ConsistencyGroup Init IncomingThroughputMbpsEMCRPA ConsistencyGroup Init IncomingThroughput
storage.emcrpa.consistencygrouplinkstatistics.initstatistics.initoutgoingthroughputEMCRPA ConsistencyGroup Link Init OutgoingThroughputMbpsEMCRPA ConsistencyGroup Link Init OutgoingThroughput
storage.emcrpa.consistencygrouplinkstatistics.initstatistics.numberOfgridsEMCRPA ConsistencyGroup Link Init Grid CountNULLEMCRPA ConsistencyGroup Link Init Grid Count
storage.emcrpa.consistencygrouplinkstatistics.pipestatistics.averagejournalcompressionratioEMCRPA ConsistencyGroup Pipe Average Journal CompressionRatioNULLEMCRPA ConsistencyGroup Pipe Average Journal CompressionRatio
storage.emcrpa.consistencygrouplinkstatistics.pipestatistics.compressionratioEMCRPA ConsistencyGroup Pipe CompressionRatioNULLEMCRPA ConsistencyGroup Pipe CompressionRatio
storage.emcrpa.consistencygrouplinkstatistics.pipestatistics.detachdatarateEMCRPA ConsistencyGroup Link Pipe Detach DataNULLEMCRPA ConsistencyGroup Link Pipe Detach Data
storage.emcrpa.consistencygrouplinkstatistics.pipestatistics.detachdataEMCRPA ConsistencyGroup Link Detach DataNULLEMCRPA ConsistencyGroup Link Detach Data
storage.emcrpa.consistencygrouplinkstatistics.pipestatistics.transactioncounterEMCRPA ConsistencyGroup Link Pipe Transaction CounterNULLEMCRPA ConsistencyGroup Link Pipe Transaction Counter
storage.emcrpa.consistencygrouplinkstatistics.pipestatistics.timecounterEMCRPA ConsistencyGroup Link TimeCounterNULLEMCRPA ConsistencyGroup Link TimeCounter
storage.emcrpa.consistencygrouplinkstatistics.pipestatistics.datacounterEMCRPA ConsistencyGroup Pipe DatacounterNULLEMCRPA ConsistencyGroup Pipe Datacounter
storage.emcrpa.consistencygrouplinkstatistics.pipestatistics.numberofgridsEMCRPA ConsistencyGroup Link Pipe Grid CountNULLEMCRPA ConsistencyGroup Link Pipe Grid Count
storage.emcrpa.consistencygrouplinkstatistics.pipestatistics.outgoingthroughputEMCRPA ConsistencyGroup Link Pipe Outgoing ThroughputMbpsEMCRPA ConsistencyGroup Link Pipe Outgoing Throughput
storage.emcrpa.consistencygrouplinkstatistics.pipestatistics.replicationmodeEMCRPA ConsistencyGroup Link ReplicationModeEMCRPA ConsistencyGroup Link ReplicationMode
storage.emcrpa.consistencygrouplinkstatistics.pipestatistics.syncremotelinkEMCRPA ConsistencyGroup Sync RemoteLinkNULLEMCRPA ConsistencyGroup Sync RemoteLink
storage.emcrpa.consistencygrouplinkstatistics.pipestatistics.deduplicationratioEMCRPA ConsistencyGroup Link DeduplicationRatioNULLEMCRPA ConsistencyGroup Link DeduplicationRatio
storage.emcrpa.consistencyGroupLinkStatistics.pipe.averageDeduplicationRatiossEMCRPA ConsistencyGroupLink Pipe Deduplication Average RatioNULLEMCRPA ConsistencyGroupLink Pipe Deduplication Average Ratio

EMCRPA RPA Performance

Description

EMCRPA RPA Performance

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
EMCRPA RPA Performance Monitorstorage.emcrpa.rpa.cpuusageEMCRPA RPA Cpu Usage%EMCRPA RPA Cpu Usage
storage.emcrpa.rpa.traffic.applicationthroughputstatistics.applicationincomingwritesEMCRPA RPA Traffic Application IncomingWritesNULLEMCRPA RPA Traffic Application IncomingWrites
storage.emcrpa.rpa.traffic.applicationthroughputstatistics.connectionsoutthroughput.outthroughputEMCRPA RPA Traffic Application Connections OutThroughputMbpsEMCRPA RPA Traffic Application Connections OutThroughput
storage.emcrpa.rpa.traffic.applicationthroughputstatistics.inthroughputEMCRPA RPA Traffic Application InThroughputMbpsEMCRPA RPA Traffic Application InThroughput
storage.emcrpa.rpa.traffic.connectionscompressionratio.compressionratioEMCRPA RPA Traffic CompressionRatioNULLEMCRPA RPA Traffic CompressionRatio
storage.emcrpa.rpa.traffic.initthroughputstatistics.connectionsoutthroughput.outthroughputEMCRPA RPA Traffic Init Connections OutThroughputMbpsEMCRPA RPA Traffic Init Connections OutThroughput
storage.emcrpa.rpa.traffic.initthroughputstatistics.inthroughputEMCRPA RPA Traffic InThroughputMbpsEMCRPA RPA Traffic InThroughput

Enterasys CTRON Chassis Monitors - G2

Description

Applicable on the Enterasys Networks C5 and B5. Monitors CTRON Chassis Fan Module State,power supply state etc. Can be applied on Enterasys Networks,Inc. C5G124-24P2 Rev 06.71.04.0004. SNMP Obj Id=1.3.6.1.4.1.5624.2.1.143.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
CTRON Chassis Environment Fan Statusctron.chassis.environment.fan.stateCTRON Chassis Environment Fan StateMonitors the status of the chassis fan. Possible values are 1- unknown,2- normal,3- testing,4- slow,5- inoperative,6- off.[OIDs: 1.3.6.1.4.1.52.4.1.1.8.1.12.1.1,1.3.6.1.4.1.52.4.1.1.8.1.12.1.3,1.3.6.1.4.1.52.4.1.1.8.1.12.1.2]
CTRON Chassis Fan Module Statectron.chassis.fan.module.stateCTRON Chassis Fan Module StateMonitors the fan modules state. Possible status values are 1- infoNotAvailable,2- notInstalled,3- installedAndOperating,4- installedAndNotOperating.[OIDs: 1.3.6.1.4.1.52.4.3.1.3.1.1.1,1.3.6.1.4.1.52.4.3.1.3.1.1.2]
CTRON Chassis Power Supply Statectron.chassis.power.supply.stateCTRON Chassis Power Supply StateMonitors the power supply's state. Possible values are 1- infoNotAvailable,2- notInstalled,3- installedAndOperating,4- installedAndNotOperating.[OIDs: 1.3.6.1.4.1.52.4.3.1.2.1.1.1,1.3.6.1.4.1.52.4.3.1.2.1.1.2]

Entity Operational State

Description

Template to monitors the entities (like Fan,Power,Temperature,Voltage etc.) operational status [ENTITY-MIB :: entPhysicalName : 1.3.6.1.2.1.47.1.1.1.1.7,ENTITY-STATE-MIB :: entStateOper : 1.3.6.1.2.1.131.1.1.1.3]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Entity Operational Stateentity_operational_stateEntity Operational StateMonitors the entities (like Fan,Power,Temperature,Voltage etc.) operational status. Possible values for the operational status are: 1-unknown,2-inoperable,3-operable,4-testing.[ENTITY-MIB :: entPhysicalName : 1.3.6.1.2.1.47.1.1.1.1.7,ENTITY-STATE-MIB :: entStateOper : 1.3.6.1.2.1.131.1.1.1.3]

Entity Physical Sensor Reading and Status - Ext

Description

Template to monitor entity physical sensors (like electric potential ac,electric potential dc,electric current,power,frequency,temperature,percent relative humidity,shaft revolutions per minute and cubic meters per minute (airflow)) values and their operational statuses. Prerequisites: Device should support ENTITY-SENSOR-MIB,ENTITY-MIB and their tables like entPhySensorType-1.3.6.1.2.1.99.1.1.1.1,entPhySensorScale-1.3.6.1.2.1.99.1.1.1.2,entPhySensorPrecision-1.3.6.1.2.1.99.1.1.1.3,entPhySensorValue-1.3.6.1.2.1.99.1.1.1.4,entPhySensorOperStatus-1.3.6.1.2.1.99.1.1.1.5,entPhysicalName-1.3.6.1.2.1.47.1.1.1.1.7

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Entity Physical Sensor Reading and Status - Extent.physical.sensor.frequencyFrequencyHzIt represents an Entity Frequency Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.relative.humidityRelative Humidity(RH) %%It represents an Entity Relative Humidity(RH) Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.electric.currentElectric CurrentampsIt represents an Entity Electric Current Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.rpmRPMrpmIt represents an Entity RPM Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.powerPowerWIt represents an Entity Power Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.operational.statusOperational StatusMonitors the physical sensors (like Fan,Power,Temperature,Voltage etc.) operational status. Possible values for the operational status are: 1- ok: indicates that the agent can obtain the sensor value,2- unavailable: indicates that the agent presently cannot obtain the sensor value,3- nonoperational: indicates that the agent believes the sensor is broken. The sensor could have a hard failure (disconnected wire),or a soft failure such as out-of-range,jittery,or wildly fluctuating readings.[ENTITY-SENSOR-MIB::entPhySensorOperStatus-1.3.6.1.2.1.99.1.1.1.5,entPhysicalName-1.3.6.1.2.1.47.1.1.1.1.7]
ent.physical.sensor.electric.potential.dcElectric Potential DCvIt represents an Entity Electric Potential DC Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.electric.potential.acElectric Potential ACvIt represents an Entity Electric Potential AC Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.airflowAirflow (cmm)It represents an Entity Cubic Meters per minute (airflow) Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.temperatureCelsiusIt represents an Entity Temperature Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]

Entity Physical Sensor Reading and Status - Ext - Rev2

Description

Template to monitor entity physical sensors (like electric potential ac,electric potential dc,electric current,power,frequency,temperature,percent relative humidity,shaft revolutions per minute and cubic meters per minute (airflow)) values and their operational statuses. REVISION: 202107310000Z. Description: Enhanced the script to take entPhysicalDescr incase of empty entPhysicalName.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Entity Physical Sensor Reading and Status - Ext - Rev2ent.physical.sensor.frequencyFrequencyHzIt represents an Entity Frequency Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.relative.humidityRelative Humidity(RH) %%It represents an Entity Relative Humidity(RH) Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.electric.currentElectric CurrentampsIt represents an Entity Electric Current Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.rpmRPMrpmIt represents an Entity RPM Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.powerPowerWIt represents an Entity Power Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.operational.statusOperational StatusMonitors the physical sensors (like Fan,Power,Temperature,Voltage etc.) operational status. Possible values for the operational status are: 1- ok: indicates that the agent can obtain the sensor value,2- unavailable: indicates that the agent presently cannot obtain the sensor value,3- nonoperational: indicates that the agent believes the sensor is broken. The sensor could have a hard failure (disconnected wire),or a soft failure such as out-of-range,jittery,or wildly fluctuating readings.[ENTITY-SENSOR-MIB::entPhySensorOperStatus-1.3.6.1.2.1.99.1.1.1.5,entPhysicalName-1.3.6.1.2.1.47.1.1.1.1.7]
ent.physical.sensor.electric.potential.dcElectric Potential DCvIt represents an Entity Electric Potential DC Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.electric.potential.acElectric Potential ACvIt represents an Entity Electric Potential AC Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.airflowAirflow (cmm)It represents an Entity Cubic Meters per minute (airflow) Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]
ent.physical.sensor.temperatureCelsiusIt represents an Entity Temperature Sensor value.[ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4]

Entity Physical Sensor Status

Description

Monitors the entity physical sensors (like Fan,Power,Temperature,Voltage etc.) operational status and their most recently measured values.[OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.4,1.3.6.1.2.1.99.1.1.1.5,1.3.6.1.2.1.99.1.1.1.6]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Entity Physical Sensor Statusphysical.sensor.operational.statusPhysical Sensor Operational StatusMonitors the physical sensors (like Fan,Power,Temperature,Voltage etc.) operational status and their most recently measured values. Possible values for the operational status are: 1- ok: indicates that the agent can obtain the sensor value,2- unavailable: indicates that the agent presently cannot obtain the sensor value,3- nonoperational: indicates that the agent believes the sensor is broken. The sensor could have a hard failure (disconnected wire),or a soft failure such as out-of-range,jittery,or wildly fluctuating readings.[OIDs: 1.3.6.1.2.1.99.1.1.1.4,1.3.6.1.2.1.99.1.1.1.5,1.3.6.1.2.1.99.1.1.1.6]

Ethernet-like Interface PAUSE Stats

Description

Monitors the MAC Control frames received and transmitted through ethernet-like interfaces with an opcode indicating the PAUSE operation.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Ethernet-like Interfaces PAUSE Statsnetwork.interface.pause.frames.inPAUSE In FramespsecRepresents the MAC Control frames received on this interface with an opcode indicating the PAUSE operation.[OIDs: 1.3.6.1.2.1.10.7.10.1.3,1.3.6.1.2.1.10.7.10.1.5]
network.interface.pause.frames.outPAUSE Out FramespsecRepresents the MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation.[OIDs: 1.3.6.1.2.1.10.7.10.1.4,1.3.6.1.2.1.10.7.10.1.6]

Extreme Enterasys - Hardware Monitoring

Description

This template is applicable on Extreme Enterasys devices. Monitors the basic parameters like fan and power supply status.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Extreme Enterasys FAN Statusextreme.enterasys.fan.stateExtreme Enterasys FAN StatusMonitors the FAN module status.[OID: 1.3.6.1.4.1.52.4.3.1.3.1.1.1,1.3.6.1.4.1.52.4.3.1.3.1.1.2].
Extreme Enterasys Power Supply Statusextreme.enterasys.power.supply.stateExtreme Enterasys Power Supply StatusMonitors the Power suply state.[OID: 1.3.6.1.4.1.52.4.3.1.2.1.1.1,1.3.6.1.4.1.52.4.3.1.2.1.1.2]

Extreme Enterasys - Performance

Description

This template is applicable on Extreme Enterasys devices. Monitors the basic parameters like CPU utilization,memory utilization.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Extreme Enterasys - Memory Utilizationextreme_enterasys_memory_UtilizationExtreme Enterasys Memory Utilization%It monitors the extreme enterasys memory utilization.[etsysResourceStorageSize:1.3.6.1.4.1.5624.1.2.49.1.3.1.1.4,etsysResourceStorageAvailable:1.3.6.1.4.1.5624.1.2.49.1.3.1.1.5]
Extreme Enterasys CPU Utilizationextreme.enterasys.cpu.utilizationExtreme Enterasys CPU Utilization%Monitors the Enterasys switch average processor CPU over the last 1min.[OID: 1.3.6.1.4.1.5624.1.2.49.1.1.1.1.3].

Extreme VSP 7200 Series

Description

Template to monitor Extreme VSP 7200 Series Switches . It monitors Power Supply Status,2k Card Operational Status,VOSS System Sensor Temperature,VOSS System Temperature Status,CPU Utilization,Memory Utilization,CP System CPU Temperature,CP System MAC Temperature,CP System PHY1 Temperature,CP System PHY2 Temperature,CP System MAC2 Temperature.

Prerequisites

Device should have support for RAPID-CITY.mib

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Extreme - 2k Card Operational Statusextreme.2k.card.operational.status2k Card Operational StatusIt monitors the Extreme 2k card operational status. Possible values are 1 - up,2 - down,3 - testing,4 - unknown,5 - dormant,6 - upMaster,7 - upDormant,8 - upWarmstandby.[RAPID-CITY.mib::rc2kCardFrontOperStatus - 1.3.6.1.4.1.2272.1.100.6.1.5]
Extreme - Power Supply Statusextreme.chassis.power.supply.statusPower Supply StatusIt monitors the Extreme power supply status. Possible values are 1 - unknown(status can not be determined),2 - up(present and supplying power),3 - down(present,but failure indicated) [RAPID-CITY.mib::rcChasPowerSupplyOperStatus - 1.3.6.1.4.1.2272.1.4.8.1.1.2]
Extreme - Single CP Systemextreme.cp.system.cpu.temperatureCP System CPU TemperatureCelsiusIt monitors the temperature in celsius of the air near CPU area.[RAPID-CITY.mib::rcSingleCpSystemCpuTemperature - 1.3.6.1.4.1.2272.1.212.1]
extreme.cp.system.mac.temperatureCP System MAC TemperatureCelsiusIt monitors the temperature in celsius of the air near MAC area.[RAPID-CITY.mib::rcSingleCpSystemMacTemperature - 1.3.6.1.4.1.2272.1.212.2]
extreme.cp.system.phy1.temperatureCP System PHY1 TemperatureCelsiusIt monitors the temperature in celsius of the air near PHY1 area.[RAPID-CITY.mib::rcSingleCpSystemPhy1Temperature - 1.3.6.1.4.1.2272.1.212.3]
extreme.cp.system.phy2.temperatureCP System PHY2 TemperatureCelsiusIt monitors the temperature in celsius of the air near PHY2 area.[RAPID-CITY.mib::rcSingleCpSystemPhy2Temperature - 1.3.6.1.4.1.2272.1.212.4]
extreme.cp.system.mac2.temperatureCP System MAC2 TemperatureCelsiusIt monitors the temperature in celsius of the air near MAC2 area.[RAPID-CITY.mib::rcSingleCpSystemMac2Temperature - 1.3.6.1.4.1.2272.1.212.5]
Extreme - Slot Performanceextreme.cpu.utilizationCPU Utilization%It monitors the Extreme CPU utilization in percentage [RAPID-CITY.mib::rcKhiSlotCpuCurrentUtil - 1.3.6.1.4.1.2272.1.85.10.1.1.2]
extreme.memory.utilizationMemory Utilization%It monitors the extreme memory utilization in percentage.[RAPID-CITY.mib::rcKhiSlotMemUtil - 1.3.6.1.4.1.2272.1.85.10.1.1.8]
Extreme - VOSS System Sensor Temperatureextreme.voss.system.sensor.temperatureVOSS System Sensor TemperatureCelsiusIt monitors the Extreme VOSS(VSP Operating System Software) system sensor temperature value.[RAPID-CITY.mib::rcVossSystemTemperatureTemperature - 1.3.6.1.4.1.2272.1.101.1.1.2.1.3]
extreme.voss.system.temperature.statusVOSS System Temperature StatusIt monitors the Extreme VOSS system temperature status. Possible values are 1 - normal,2 - highWarning,3 - highCritial.[RAPID-CITY.mib::rcVossSystemTemperatureStatus - 1.3.6.1.4.1.2272.1.101.1.1.2.1.6].

Extreme VSP 8400 Series

Description

Template to monitor Extreme VSP 8400 Series Switches . It monitors Power Supply Status,RSMLT Operational Status,RSMLT Peer Operational Status,2k Card Operational Status,VOSS System Sensor Temperature,VOSS System Temperature Status,CPU Utilization,Memory Utilization,CP System CPU Temperature,CP System MAC Temperature,CP System PHY1 Temperature,CP System PHY2 Temperature,CP System MAC2 Temperature.

Prerequisites

Device should have support for RAPID-CITY.mib

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Extreme - 2k Card Operational Statusextreme.2k.card.operational.status2k Card Operational StatusIt monitors the Extreme 2k card operational status. Possible values are 1 - up,2 - down,3 - testing,4 - unknown,5 - dormant,6 - upMaster,7 - upDormant,8 - upWarmstandby.[RAPID-CITY.mib::rc2kCardFrontOperStatus - 1.3.6.1.4.1.2272.1.100.6.1.5]
Extreme - Power Supply Statusextreme.chassis.power.supply.statusPower Supply StatusIt monitors the Extreme power supply status. Possible values are 1 - unknown(status can not be determined),2 - up(present and supplying power),3 - down(present,but failure indicated) [RAPID-CITY.mib::rcChasPowerSupplyOperStatus - 1.3.6.1.4.1.2272.1.4.8.1.1.2]
Extreme - Single CP Systemextreme.cp.system.cpu.temperatureCP System CPU TemperatureCelsiusIt monitors the temperature in celsius of the air near CPU area.[RAPID-CITY.mib::rcSingleCpSystemCpuTemperature - 1.3.6.1.4.1.2272.1.212.1]
extreme.cp.system.mac.temperatureCP System MAC TemperatureCelsiusIt monitors the temperature in celsius of the air near MAC area.[RAPID-CITY.mib::rcSingleCpSystemMacTemperature - 1.3.6.1.4.1.2272.1.212.2]
extreme.cp.system.phy1.temperatureCP System PHY1 TemperatureCelsiusIt monitors the temperature in celsius of the air near PHY1 area.[RAPID-CITY.mib::rcSingleCpSystemPhy1Temperature - 1.3.6.1.4.1.2272.1.212.3]
extreme.cp.system.phy2.temperatureCP System PHY2 TemperatureCelsiusIt monitors the temperature in celsius of the air near PHY2 area.[RAPID-CITY.mib::rcSingleCpSystemPhy2Temperature - 1.3.6.1.4.1.2272.1.212.4]
extreme.cp.system.mac2.temperatureCP System MAC2 TemperatureCelsiusIt monitors the temperature in celsius of the air near MAC2 area.[RAPID-CITY.mib::rcSingleCpSystemMac2Temperature - 1.3.6.1.4.1.2272.1.212.5]
Extreme - Slot Performanceextreme.cpu.utilizationCPU Utilization%It monitors the Extreme CPU utilization in percentage [RAPID-CITY.mib::rcKhiSlotCpuCurrentUtil - 1.3.6.1.4.1.2272.1.85.10.1.1.2]
extreme.memory.utilizationMemory Utilization%It monitors the extreme memory utilization in percentage.[RAPID-CITY.mib::rcKhiSlotMemUtil - 1.3.6.1.4.1.2272.1.85.10.1.1.8]
Extreme - VOSS System Sensor Temperatureextreme.voss.system.sensor.temperatureVOSS System Sensor TemperatureCelsiusIt monitors the Extreme VOSS(VSP Operating System Software) system sensor temperature value.[RAPID-CITY.mib::rcVossSystemTemperatureTemperature - 1.3.6.1.4.1.2272.1.101.1.1.2.1.3]
extreme.voss.system.temperature.statusVOSS System Temperature StatusIt monitors the Extreme VOSS system temperature status. Possible values are 1 - normal,2 - highWarning,3 - highCritial.[RAPID-CITY.mib::rcVossSystemTemperatureStatus - 1.3.6.1.4.1.2272.1.101.1.1.2.1.6].
Extreme - RSMLT Operational Statusextreme.rsmlt.operational.statusRSMLT Operational StatusIt monitors the Extreme RSMLT operational status. Possible values are 1 - up,2 - down [RAPID-CITY.mib::rcIpRsmltOperOperStatus - 1.3.6.1.4.1.2272.1.8.26.2.1.8].
Extreme - RSMLT Peer Operational Statusextreme.rsmlt.peer.operational.statusRSMLT Peer Operational StatusIt monitors the Extreme RSMLT peer operational status. Possible values are 1 - up,2 - down [RAPID-CITY.mib::rcIpRsmltPeerOperStatus - 1.3.6.1.4.1.2272.1.8.26.3.1.8].

Extreme VSP 8600 Series

Description

Template to monitor Extreme VSP 8600 Series Switches . It monitors Power Supply Status,RSMLT Operational Status,RSMLT Peer Operational Status,2k Card Operational Status,VOSS System Sensor Temperature,VOSS System Temperature Status,CPU Utilization,Memory Utilization,CP System CPU Temperature,CP System MAC Temperature,CP System PHY1 Temperature,CP System PHY2 Temperature,CP System MAC2 Temperature.

Prerequisites

Device should have support for RAPID-CITY.mib

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Extreme - 2k Card Operational Statusextreme.2k.card.operational.status2k Card Operational StatusIt monitors the Extreme 2k card operational status. Possible values are 1 - up,2 - down,3 - testing,4 - unknown,5 - dormant,6 - upMaster,7 - upDormant,8 - upWarmstandby.[RAPID-CITY.mib::rc2kCardFrontOperStatus - 1.3.6.1.4.1.2272.1.100.6.1.5]
Extreme - Power Supply Statusextreme.chassis.power.supply.statusPower Supply StatusIt monitors the Extreme power supply status. Possible values are 1 - unknown(status can not be determined),2 - up(present and supplying power),3 - down(present,but failure indicated) [RAPID-CITY.mib::rcChasPowerSupplyOperStatus - 1.3.6.1.4.1.2272.1.4.8.1.1.2]
Extreme - Single CP Systemextreme.cp.system.cpu.temperatureCP System CPU TemperatureCelsiusIt monitors the temperature in celsius of the air near CPU area.[RAPID-CITY.mib::rcSingleCpSystemCpuTemperature - 1.3.6.1.4.1.2272.1.212.1]
extreme.cp.system.mac.temperatureCP System MAC TemperatureCelsiusIt monitors the temperature in celsius of the air near MAC area.[RAPID-CITY.mib::rcSingleCpSystemMacTemperature - 1.3.6.1.4.1.2272.1.212.2]
extreme.cp.system.phy1.temperatureCP System PHY1 TemperatureCelsiusIt monitors the temperature in celsius of the air near PHY1 area.[RAPID-CITY.mib::rcSingleCpSystemPhy1Temperature - 1.3.6.1.4.1.2272.1.212.3]
extreme.cp.system.phy2.temperatureCP System PHY2 TemperatureCelsiusIt monitors the temperature in celsius of the air near PHY2 area.[RAPID-CITY.mib::rcSingleCpSystemPhy2Temperature - 1.3.6.1.4.1.2272.1.212.4]
extreme.cp.system.mac2.temperatureCP System MAC2 TemperatureCelsiusIt monitors the temperature in celsius of the air near MAC2 area.[RAPID-CITY.mib::rcSingleCpSystemMac2Temperature - 1.3.6.1.4.1.2272.1.212.5]
Extreme - Slot Performanceextreme.cpu.utilizationCPU Utilization%It monitors the Extreme CPU utilization in percentage [RAPID-CITY.mib::rcKhiSlotCpuCurrentUtil - 1.3.6.1.4.1.2272.1.85.10.1.1.2]
extreme.memory.utilizationMemory Utilization%It monitors the extreme memory utilization in percentage.[RAPID-CITY.mib::rcKhiSlotMemUtil - 1.3.6.1.4.1.2272.1.85.10.1.1.8]
Extreme - VOSS System Sensor Temperatureextreme.voss.system.sensor.temperatureVOSS System Sensor TemperatureCelsiusIt monitors the Extreme VOSS(VSP Operating System Software) system sensor temperature value.[RAPID-CITY.mib::rcVossSystemTemperatureTemperature - 1.3.6.1.4.1.2272.1.101.1.1.2.1.3]
extreme.voss.system.temperature.statusVOSS System Temperature StatusIt monitors the Extreme VOSS system temperature status. Possible values are 1 - normal,2 - highWarning,3 - highCritial.[RAPID-CITY.mib::rcVossSystemTemperatureStatus - 1.3.6.1.4.1.2272.1.101.1.1.2.1.6].
Extreme - RSMLT Operational Statusextreme.rsmlt.operational.statusRSMLT Operational StatusIt monitors the Extreme RSMLT operational status. Possible values are 1 - up,2 - down [RAPID-CITY.mib::rcIpRsmltOperOperStatus - 1.3.6.1.4.1.2272.1.8.26.2.1.8].
Extreme - RSMLT Peer Operational Statusextreme.rsmlt.peer.operational.statusRSMLT Peer Operational StatusIt monitors the Extreme RSMLT peer operational status. Possible values are 1 - up,2 - down [RAPID-CITY.mib::rcIpRsmltPeerOperStatus - 1.3.6.1.4.1.2272.1.8.26.3.1.8].

Extreme WiNG - Access Point

Description

Template to monitor Extreme WiNG access point performance and statistics like Global Client Count,Global Client Count,CPU Load (%),Online Radios Count,Device Online Status,Radio Traffic and RF Statistics on AP,Radio Traffic and RF Statistics on RF Domain,AP Fault Detection,AP Radio,RF Domain Radio,RF Domain - WLAN. Validated on AP7632. sysObjectID : 1.3.6.1.4.1.388.50.1.1.54.

Prerequisites

The device should have support for WING-MIB.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Extreme WiNG - AP Fault Detectionextreme.wing.ap.fault.detectionAP Fault DetectionIt monitors whether any fault has been detected on the AP.Possible value are true(1),false(2).[WING-MIB::wingStatsDevWlApInfoFaultDetected:1.3.6.1.4.1.388.50.1.4.2.25.1.1.1.2].
Extreme WiNG - AP Radioextreme.wing.ap.radio.stateAP Radio StateIt monitors the radio state.Possible values are On(1),Off(2).[WING-MIB::wingStatsDevWlRadioState:1.3.6.1.4.1.388.50.1.4.2.25.9.1.1.9].
extreme.wing.ap.radio.powerAP Radio PowerdBmIt monitors the current power the radio is operating at.[WING-MIB::wingStatsDevWlRadioCurPower:1.3.6.1.4.1.388.50.1.4.2.25.9.1.1.12].
extreme.wing.ap.radio.client.countAP Radio Client CountcountIt monitors the number of clients associated to the radio.[WING-MIB::wingStatsDevWlRadioNumClient:1.3.6.1.4.1.388.50.1.4.2.25.9.1.1.15].
Extreme WiNG - Device Online Statusextreme.wing.device.online.statusDevice Online StatusIt monitors the device online status.[WING-MIB::wingStatsDevOnline:1.3.6.1.4.1.388.50.1.4.2.1.1.7].
Extreme WiNG - Global Statisticsextreme.wing.global.client.countGlobal Client CountcountIt monitors the global client count.[WING-MIB::wingStatsNocGlobalClientCount:1.3.6.1.4.1.388.50.1.4.1.15.1].
extreme.wing.offline.device.countOffline Device CountcountIt monitors the offline device count.[WING-MIB::wingStatsNocDevOffLineInfoCount:1.3.6.1.4.1.388.50.1.4.1.14.2].
extreme.wing.cpu.loadCPU Load (%)%It monitors the CPU load in percentage.[WING-MIB::wingStatsDevSysInfoOnCurrentDeviceLoadLimitS0:1.3.6.1.4.1.388.50.1.4.2.2.2.1].
Extreme WiNG - Radio Traffic and RF Statistics - APextreme.wing.ap.radio.quality.indexAP Radio Quality IndexIt monitors the quality of the medium in percentage.Possible values are 0-20: very poor quality,20-40: poor quality,40-60: average quality,60-100: good quality.[WING-MIB::wingStatsDevWlRadioStatQIndex:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.21].
extreme.wing.ap.radio.bytes.tx.rateAP Radio Bytes Tx RatevBpsIt monitors the number of data bytes transmitted from radio to clients.[WING-MIB::wingStatsDevWlRadioStatTxBytes:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.6].
extreme.wing.ap.radio.bytes.rx.rateAP Radio Bytes Rx RateBpsIt monitors the number of data bytes received from clients to radio.[WING-MIB::wingStatsDevWlRadioStatRxBytes:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.7].
extreme.wing.ap.radio.tx.dropped.rateAP Radio Tx Dropped RateBpsIt monitors the number of packets of data dropped on transmission.[WING-MIB::wingStatsDevWlRadioStatTxDropped:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.10].
extreme.wing.ap.radio.rx.error.rateAP Radio Rx Error RateBpsIt monitors the number of packets of data received with errors.[WING-MIB::wingStatsDevWlRadioStatRxErrors:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.11].
extreme.wing.ap.radio.noiseAP Radio NoisedBmIt monitors the noise level in units of dbm.[WING-MIB::wingStatsDevWlRadioStatNoise:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.16].
extreme.wing.ap.radio.snrAP Radio SNRdBIt monitors the signal to noise ratio in units of db.[WING-MIB::wingStatsDevWlRadioStatSnr:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.17].
extreme.wing.ap.radio.total.clientsAP Radio Total ClientscountIt monitors the total number of clients.[WING-MIB::wingStatsDevWlRadioStatNumClients:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.22].
extreme.wing.ap.radio.signal.strengthAP Radio Signal StrengthdBmIt monitors the signal strength in units of dbm.[WING-MIB::wingStatsDevWlRadioStatSignal:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.15].
Extreme WiNG - Radio Traffic and RF Statistics - RF Domainextreme.wing.rfd.radio.quality.indexRF Domain Radio Quality IndexIt monitors the quality of the medium in percentage. Possible values are 0-20: very poor quality,20-40: poor quality,40-60: average quality,60-100: good quality.[WING-MIB::wingStatsRfdWlRadioStatQIndex:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.21].
extreme.wing.rfd.radio.noiseRF Domain Radio NoisedBmIt monitors the noise level in units of dbm.[WING-MIB::wingStatsRfdWlRadioStatNoise:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.16].
extreme.wing.rfd.radio.bytes.tx.rateRF Domain Radio Bytes Tx RateBpsIt monitors the number of data bytes transmitted from radio to clients.[WING-MIB::wingStatsRfdWlRadioStatTxBytes:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.6].
extreme.wing.rfd.radio.bytes.rx.rateRF Domain Radio Bytes Rx RateBpsIt monitors the number of data bytes received from clients to radio.[WING-MIB::wingStatsRfdWlRadioStatRxBytes:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.7].
extreme.wing.rfd.radio.tx.dropped.rateRF Domain Radio Tx Dropped RateBpsIt monitors the number of packets of data dropped on transmission.[WING-MIB::wingStatsRfdWlRadioStatTxDropped:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.10].
extreme.wing.rfd.radio.rx.error.rateRF Domain Radio Rx Error RateBpsIt monitors the number of packets of data received with errors.[WING-MIB::wingStatsRfdWlRadioStatRxErrors:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.11].
extreme.wing.rfd.radio.snrRF Domain Radio SNRdBIt monitors the signal to noise ratio in units of db.[WING-MIB::wingStatsRfdWlRadioStatSnr:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.17].
extreme.wing.rfd.radio.total.clientsRF Domain Radio Total ClientscountIt monitors the total number of clients.[WING-MIB::wingStatsRfdWlRadioStatNumClients:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.22].
extreme.wing.rfd.radio.signal.strengthRF Domain Radio Signal StrengthdBmIt monitors the signal strength in units of dbm.[WING-MIB::wingStatsRfdWlRadioStatSignal:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.15].
Extreme WiNG - RF Domain - WLANextreme.wing.rfd.wlan.tx.bytes.rateRF Domain WLAN Bytes Tx RateBpsIt monitors the tx data frames per ssid.[WING-MIB::wingStatsRfdWlWlanTxBytes:1.3.6.1.4.1.388.50.1.4.3.2.12.1.2].
extreme.wing.rfd.wlan.rx.bytes.rateRF Domain WLAN Bytes Rx RateBpsIt monitors the rx data frames per ssid.[WING-MIB::wingStatsRfdWlWlanRxBytes;1.3.6.1.4.1.388.50.1.4.3.2.12.1.5].
extreme.wing.rfd.wlan.tx.dropped.rateRF Domain WLAN Tx Dropped RateBpsIt monitors the dropped tx packets.[WING-MIB::wingStatsRfdWlWlanTxDropped:1.3.6.1.4.1.388.50.1.4.3.2.12.1.8].
extreme.wing.rfd.wlan.rx.error.rateRF Domain WLAN Rx Error RateBpsIt monitors the received error packets.[WING-MIB::wingStatsRfdWlWlanRxErrors:1.3.6.1.4.1.388.50.1.4.3.2.12.1.9].
Extreme WiNG - RF Domain Radioextreme.wing.rfd.radio.stateRF Domain Radio StateIt monitors the radio state.Possible values are On(1),Off(2).[WING-MIB::wingStatsRfdWlRadioState:1.3.6.1.4.1.388.50.1.4.3.2.8.1.1.9].
extreme.wing.rfd.radio.powerRF Domain Radio PowerdBmIt monitors the current power the radio is operating at.[WING-MIB::wingStatsRfdWlRadioCurPower:1.3.6.1.4.1.388.50.1.4.3.2.8.1.1.12].
extreme.wing.rfd.radio.client.countRF Domain Radio Client CountcountIt monitors the number of clients associated to the radio.[WING-MIB::wingStatsRfdWlRadioNumClient:1.3.6.1.4.1.388.50.1.4.3.2.8.1.1.15].

Extreme WiNG - WLAN Controller

Description

Template to monitor Extreme WiNG access point performance and statistics like Global Client Count,Global Client Count,CPU Load (%),Adopted Devices Online Status,Device Online Status,Radio Traffic and RF Statistics on AP,Radio Traffic and RF Statistics on RF Domain,AP Fault Detection,AP Radio,RF Domain Radio,RF Domain - WLAN. Validated on NX7500. sysObjectID : 1.3.6.1.4.1.388.50.1.1.38

Prerequisites

The device should have support for WING-MIB.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Extreme WiNG - Adopted Devices Online Statusextreme.wing.adopted.devices.online.statusAdopted Devices Online StatusIt monitors the adopted devices online status.[WING-MIB::wingStatsDevAdoptDevOnline:1.3.6.1.4.1.388.50.1.4.2.8.2.1.7].
Extreme WiNG - AP Fault Detectionextreme.wing.ap.fault.detectionAP Fault DetectionIt monitors whether any fault has been detected on the AP.Possible value are true(1),false(2).[WING-MIB::wingStatsDevWlApInfoFaultDetected:1.3.6.1.4.1.388.50.1.4.2.25.1.1.1.2].
Extreme WiNG - AP Radioextreme.wing.ap.radio.stateAP Radio StateIt monitors the radio state.Possible values are On(1),Off(2).[WING-MIB::wingStatsDevWlRadioState:1.3.6.1.4.1.388.50.1.4.2.25.9.1.1.9].
extreme.wing.ap.radio.powerAP Radio PowerdBmIt monitors the current power the radio is operating at.[WING-MIB::wingStatsDevWlRadioCurPower:1.3.6.1.4.1.388.50.1.4.2.25.9.1.1.12].
extreme.wing.ap.radio.client.countAP Radio Client CountcountIt monitors the number of clients associated to the radio.[WING-MIB::wingStatsDevWlRadioNumClient:1.3.6.1.4.1.388.50.1.4.2.25.9.1.1.15].
Extreme WiNG - Device Online Statusextreme.wing.device.online.statusDevice Online StatusIt monitors the device online status.[WING-MIB::wingStatsDevOnline:1.3.6.1.4.1.388.50.1.4.2.1.1.7].
Extreme WiNG - Global Statisticsextreme.wing.global.client.countGlobal Client CountcountIt monitors the global client count.[WING-MIB::wingStatsNocGlobalClientCount:1.3.6.1.4.1.388.50.1.4.1.15.1].
extreme.wing.offline.device.countOffline Device CountcountIt monitors the offline device count.[WING-MIB::wingStatsNocDevOffLineInfoCount:1.3.6.1.4.1.388.50.1.4.1.14.2].
extreme.wing.cpu.loadCPU Load (%)%It monitors the CPU load in percentage.[WING-MIB::wingStatsDevSysInfoOnCurrentDeviceLoadLimitS0:1.3.6.1.4.1.388.50.1.4.2.2.2.1].
Extreme WiNG - Radio Traffic and RF Statistics - APextreme.wing.ap.radio.quality.indexAP Radio Quality IndexIt monitors the quality of the medium in percentage.Possible values are 0-20: very poor quality,20-40: poor quality,40-60: average quality,60-100: good quality.[WING-MIB::wingStatsDevWlRadioStatQIndex:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.21].
extreme.wing.ap.radio.bytes.tx.rateAP Radio Bytes Tx RatevBpsIt monitors the number of data bytes transmitted from radio to clients.[WING-MIB::wingStatsDevWlRadioStatTxBytes:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.6].
extreme.wing.ap.radio.bytes.rx.rateAP Radio Bytes Rx RateBpsIt monitors the number of data bytes received from clients to radio.[WING-MIB::wingStatsDevWlRadioStatRxBytes:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.7].
extreme.wing.ap.radio.tx.dropped.rateAP Radio Tx Dropped RateBpsIt monitors the number of packets of data dropped on transmission.[WING-MIB::wingStatsDevWlRadioStatTxDropped:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.10].
extreme.wing.ap.radio.rx.error.rateAP Radio Rx Error RateBpsIt monitors the number of packets of data received with errors.[WING-MIB::wingStatsDevWlRadioStatRxErrors:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.11].
extreme.wing.ap.radio.noiseAP Radio NoisedBmIt monitors the noise level in units of dbm.[WING-MIB::wingStatsDevWlRadioStatNoise:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.16].
extreme.wing.ap.radio.snrAP Radio SNRdBIt monitors the signal to noise ratio in units of db.[WING-MIB::wingStatsDevWlRadioStatSnr:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.17].
extreme.wing.ap.radio.total.clientsAP Radio Total ClientscountIt monitors the total number of clients.[WING-MIB::wingStatsDevWlRadioStatNumClients:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.22].
extreme.wing.ap.radio.signal.strengthAP Radio Signal StrengthdBmIt monitors the signal strength in units of dbm.[WING-MIB::wingStatsDevWlRadioStatSignal:1.3.6.1.4.1.388.50.1.4.2.25.10.1.1.15].
Extreme WiNG - Radio Traffic and RF Statistics - RF Domainextreme.wing.rfd.radio.quality.indexRF Domain Radio Quality IndexIt monitors the quality of the medium in percentage. Possible values are 0-20: very poor quality,20-40: poor quality,40-60: average quality,60-100: good quality.[WING-MIB::wingStatsRfdWlRadioStatQIndex:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.21].
extreme.wing.rfd.radio.noiseRF Domain Radio NoisedBmIt monitors the noise level in units of dbm.[WING-MIB::wingStatsRfdWlRadioStatNoise:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.16].
extreme.wing.rfd.radio.bytes.tx.rateRF Domain Radio Bytes Tx RateBpsIt monitors the number of data bytes transmitted from radio to clients.[WING-MIB::wingStatsRfdWlRadioStatTxBytes:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.6].
extreme.wing.rfd.radio.bytes.rx.rateRF Domain Radio Bytes Rx RateBpsIt monitors the number of data bytes received from clients to radio.[WING-MIB::wingStatsRfdWlRadioStatRxBytes:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.7].
extreme.wing.rfd.radio.tx.dropped.rateRF Domain Radio Tx Dropped RateBpsIt monitors the number of packets of data dropped on transmission.[WING-MIB::wingStatsRfdWlRadioStatTxDropped:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.10].
extreme.wing.rfd.radio.rx.error.rateRF Domain Radio Rx Error RateBpsIt monitors the number of packets of data received with errors.[WING-MIB::wingStatsRfdWlRadioStatRxErrors:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.11].
extreme.wing.rfd.radio.snrRF Domain Radio SNRdBIt monitors the signal to noise ratio in units of db.[WING-MIB::wingStatsRfdWlRadioStatSnr:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.17].
extreme.wing.rfd.radio.total.clientsRF Domain Radio Total ClientscountIt monitors the total number of clients.[WING-MIB::wingStatsRfdWlRadioStatNumClients:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.22].
extreme.wing.rfd.radio.signal.strengthRF Domain Radio Signal StrengthdBmIt monitors the signal strength in units of dbm.[WING-MIB::wingStatsRfdWlRadioStatSignal:1.3.6.1.4.1.388.50.1.4.3.2.9.1.1.15].
Extreme WiNG - RF Domain - WLANextreme.wing.rfd.wlan.tx.bytes.rateRF Domain WLAN Bytes Tx RateBpsIt monitors the tx data frames per ssid.[WING-MIB::wingStatsRfdWlWlanTxBytes:1.3.6.1.4.1.388.50.1.4.3.2.12.1.2].
extreme.wing.rfd.wlan.rx.bytes.rateRF Domain WLAN Bytes Rx RateBpsIt monitors the rx data frames per ssid.[WING-MIB::wingStatsRfdWlWlanRxBytes;1.3.6.1.4.1.388.50.1.4.3.2.12.1.5].
extreme.wing.rfd.wlan.tx.dropped.rateRF Domain WLAN Tx Dropped RateBpsIt monitors the dropped tx packets.[WING-MIB::wingStatsRfdWlWlanTxDropped:1.3.6.1.4.1.388.50.1.4.3.2.12.1.8].
extreme.wing.rfd.wlan.rx.error.rateRF Domain WLAN Rx Error RateBpsIt monitors the received error packets.[WING-MIB::wingStatsRfdWlWlanRxErrors:1.3.6.1.4.1.388.50.1.4.3.2.12.1.9].
Extreme WiNG - RF Domain Radioextreme.wing.rfd.radio.stateRF Domain Radio StateIt monitors the radio state.Possible values are On(1),Off(2).[WING-MIB::wingStatsRfdWlRadioState:1.3.6.1.4.1.388.50.1.4.3.2.8.1.1.9].
extreme.wing.rfd.radio.powerRF Domain Radio PowerdBmIt monitors the current power the radio is operating at.[WING-MIB::wingStatsRfdWlRadioCurPower:1.3.6.1.4.1.388.50.1.4.3.2.8.1.1.12].
extreme.wing.rfd.radio.client.countRF Domain Radio Client CountcountIt monitors the number of clients associated to the radio.[WING-MIB::wingStatsRfdWlRadioNumClient:1.3.6.1.4.1.388.50.1.4.3.2.8.1.1.15].

ExtremeNetworks WLAN Controller - G2

Description

Applicable on the extreme wireless controller devices. Monitors the access point state,wireless controller temporary license days remaining and link failures in paired status. Can be applied on Extreme Networks Wireless Controller - V2110,System Version 09.01.02.0017. SNMP Obj Id=1.3.6.1.4.1.4329.15.1.1.13.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Extreme Wireless AP Stateextreme.wireless.apstateExtreme Wireless AP StateMonitors the the current state of the access point. Active means that access point has registered with this controller at some point of time and still has active connection with this controller. This variable has meaning in the context of the controller that query is done. Inactive mean access point has lost the connection with this controller,Possible status values are 1-Active,2- Inactive.[OIDs: 1.3.6.1.4.1.4329.15.3.5.1.2.1.2,1.3.6.1.4.1.4329.15.3.5.1.2.1.22]
Extreme Wireless Controller License Days Remainingextreme.wirelesscontroller.temp.licensedaysremainingExtreme Wireless Controller License Days RemainingDaysMonitors the number of days is left for the temporary license to expire.[OIDs: 1.3.6.1.4.1.4329.15.3.2.10.1.1.0,1.3.6.1.4.1.4329.15.3.2.10.1.2.0,1.3.6.1.4.1.4329.15.3.2.10.1.3.0]
Extreme Wireless Controller Link Failures Detectextreme.wirelesscontroller.detect.linkfailuresExtreme Wireless Controller Link Failures DetectsMonitors the link failures details of availability pairing. Time to detect link failure between two controllers in availability pairing,the value can be set to values between 2-30 seconds. Based on the availability status only we are monitoring the link failure,it will be monitored only when it is in paired status.[OIDs: 1.3.6.1.4.1.4329.15.3.2.8.1.0,1.3.6.1.4.1.4329.15.3.2.8.5.0]

ExtremeXOS Switch Monitors

Description

Monitors the system CPU utilization,system memory utilization,system uptime,power supply,power alarm status,fan operational status and the current temperature of the ExtremeXOS switch. Validated on ExtremeXOS X440 switch (SysObjID: enterprises.1916.2.175,enterprises.1916.2.177)

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Extreme XOS Current Temperature and Power Alarm Statusextreme.current.temperatureExtreme Current TemperatureFThis monitor provides the current temperature in degrees celcius measured inside device enclosure.[OID: 1.3.6.1.4.1.1916.1.1.1.8.0]
extreme.power.alarm.statusExtreme Power Alarm StatusThis monitor provides the alarm state of the power supply to a device. Alarm state indicates either fan failure or overtemperature condition. The possible status values are 1- True and 2- false.[OID: 1.3.6.1.4.1.1916.1.1.1.22.0]
Extreme XOS Fan Operational Statusextreme.fan.operational.statusExtreme Fan Operational StatusThis monitor provides the operational status of a cooling fan. The possible status values are : 1- True and 2- False,which are boolean.[OID: 1.3.6.1.4.1.1916.1.1.1.9.1.2]
Extreme XOS Power Supply Statusextreme.power.supply.statusExtreme Power Supply StatusThis monitor provides the status of the power supply. Possible status values are 1 - Not Present,2- Present and OK,3- Present and NOT OK.[OID: 1.3.6.1.4.1.1916.1.1.1.27.1.2]
Extreme XOS System CPU Utilizationextreme.system.cpu.utilization.5minCPU Utilization 5min%Monitors the CPU utilization by system resources. This is the CPU utilization of the system resources in the last 5 minutes.[OIDs: extremeCpuMonitorSystemUtilization5mins - 1.3.6.1.4.1.1916.1.32.1.4.1.9]
Extreme XOS System Memory Utilizationextreme.system.memory.utilizationSystem Memory Utilization%Monitors the total amount of memory used by system services in %.[OIDs: 1.3.6.1.4.1.1916.1.32.2.2.1.2,1.3.6.1.4.1.1916.1.32.2.2.1.4]
extreme.system.memory.freeSystem Memory FreeKBTotal amount of free memory in Kbytes in the system.[OIDs: 1.3.6.1.4.1.1916.1.32.2.2.1.3]
System Uptimesystem.uptimeSystem UptimesThe time since the SNMP agent in the system was last re-initialized.[OID : 1.3.6.1.2.1.1.3.0]

ExtremeXOS Switch Port Monitors

Description

It monitors the ExtemeXOS switch’s port statistics like average bandwidth utilization in the transmit(Tx) and receive(Rx) direction and monitors the number of packets dropped due to congestion on this port. Validated on ExtremeXOS X440 switch (SysObjID: enterprises.1916.2.175,enterprises.1916.2.177) Note: While assigning this template user should select ports manually which need to be monitored.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Extreme XOS Port Monitoringextreme.average.port.tx.utilizationExtreme Average Port Transmit Utilization%This monitor provides the reported average bandwidth in the transmit direction. When displayed,it shows as an Integer value i.e 99.99% is displayed as 9999.[OID: 1.3.6.1.4.1.1916.1.4.5.1.1]
extreme.average.port.rx.utilizationExtreme Average Port Receive Utilization%This monitor provides the reported average bandwidth in the receive direction. When displayed,it shows as an Integer value i.e 99.99% is displayed as 9999.[OID: 1.3.6.1.4.1.1916.1.4.5.1.2]
extreme.congestion.drop.packetsExtreme Congestion Drop PacketsThis monitor provides the number of packets dropped due to congestion on this port.[OID: 1.3.6.1.4.1.1916.1.4.14.1.1]

F5 BIG IP Device Health

Description

Monitors system health parameters such as CPU utilization,memory utilization,disk utilization,up time and cluster state.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
F5-LB Cluster Statef5lb.cluster.avail.stateCluster Availability StatusMonitors the state of the specified cluster availability indicated in color.[OIDs: 1.3.6.1.4.1.3375.2.1.10.1.2.1.1,1.3.6.1.4.1.3375.2.1.10.1.2.1.2,1.3.6.1.4.1.3375.2.1.10.1.2.1.10]
f5lb.cluster.ha.stateCluster HA StatusMonitors the state of high availability action.[OIDs: 1.3.6.1.4.1.3375.2.1.10.1.2.1.1,1.3.6.1.4.1.3375.2.1.10.1.2.1.2,1.3.6.1.4.1.3375.2.1.10.1.2.1.14]
F5-LB Host CPU Utilizationf5lb.global.host.cpu.utilizationF5 LB Host CPU Utilization%Monitors the F5 load balancer global host cpu utilization.[OID: 1.3.6.1.4.1.3375.2.1.1.2.20.37.0]
F5-LB System CPU Utilizationf5lb.multihost.system.cpu.utilF5 LB Multi Host System CPU Utilization%Monitors the average usage ratio of CPU for the associated host in the last five minutes. It is calculated by (sum of detals for user,niced,system)/(sum of deltas of user,niced,system,idle,irq,softirq,and iowait),where each delta is the difference for each stat over the last 5-minute interval; [user: sysMultiHostCpuUser5m; niced: sysMultiHostCpuNiced5m; system: sysMultiHostCpuSystem5m; idle: sysMultiHostCpuIdle5m; irq: sysMultiHostCpuIrq5m; iowait: sysMultiHostCpuIowait5m].[OIDs: 1.3.6.1.4.1.3375.2.1.7.5.2.1.1,1.3.6.1.4.1.3375.2.1.7.5.2.1.2,1.3.6.1.4.1.3375.2.1.7.5.2.1.35]
F5-LB System Host Disk Utilizationf5lb.system.host.disk.utilF5 LB System Host Disk Utilization%Provides F5 Load Balancer percentage of space used on disk.[OIDs: 1.3.6.1.4.1.3375.2.1.7.3.2.1.1,1.3.6.1.4.1.3375.2.1.7.3.2.1.3,1.3.6.1.4.1.3375.2.1.7.3.2.1.4]
f5lb.system.host.filenode.utilF5 LB System Host Disk File Node Utilization%Provides F5 Load Balancer disk file node utilization.[OIDs: 1.3.6.1.4.1.3375.2.1.7.3.2.1.1,1.3.6.1.4.1.3375.2.1.7.3.2.1.5,1.3.6.1.4.1.3375.2.1.7.3.2.1.6]
F5-LB System Memory Utilizationf5lb.system.host.memory.utilizationF5 LB System Host Memory Utilization%Provides the F5 Load Balancer system host memory utilization (not including TMM).[OIDs: 1.3.6.1.4.1.3375.2.1.7.1.1.0,1.3.6.1.4.1.3375.2.1.7.1.2.0]
f5lb.tmm.memory.utilizationF5 LB System TMM Memory Utilization%Provides the F5 Load Balancer system TMM memory utilization.[OIDs: 1.3.6.1.4.1.3375.2.1.1.2.1.44.0,1.3.6.1.4.1.3375.2.1.1.2.1.45.0]
F5-LB System Uptimef5lb.system.uptimeF5 LB System UptimesProvides the F5 Load Balancer system up time in seconds since boot.[OIDs: 1.3.6.1.4.1.3375.2.1.6.6.0,1.3.6.1.4.1.3375.2.1.6.1.0]

F5 BIG IP Device Performance Statistics

Description

Template to monitor the F5 BIG IP load balancer device performance statistics like cpu usage,throughput,total connections and availibility state.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
F5 BIG IP Device Availability Statef5lb_device_GtmDeviceStatusAvailStateF5 LoadBalancer Device Availability StatusMonitors the f5 load balancer device availibility state.[F5-BIGIP-GLOBAL-MIB::gtmDeviceStatusAvailState:1.3.6.1.4.1.3375.2.3.15.3.2.1.3]
F5 BIG IP Device Performancef5lb_device_GtmDeviceStatCpuUsageF5 Load Balancer Device CPU Usage%Provides the CPU usage in percentage for the specified device.[F5-BIGIP-GLOBAL-MIB::gtmDeviceStatCpuUsage:1.3.6.1.4.1.3375.2.3.15.2.3.1.3]
f5lb_device_GtmDeviceStatConnectionsF5 Load Balancer Device Total ConnectionscountThe number of total connections to the specified device.[F5-BIGIP-GLOBAL-MIB::gtmDeviceStatConnections:1.3.6.1.4.1.3375.2.3.15.2.3.1.9]
f5lb_device_GtmDeviceStatPktsPerSecOutF5 Load Balancer Device Packet Outpackets/secMonitors the number of packets per second sent from the specified device.[F5-BIGIP-GLOBAL-MIB::gtmDeviceStatPktsPerSecOut:1.3.6.1.4.1.3375.2.3.15.2.3.1.8]
f5lb_device_GtmDeviceStatPktsPerSecInF5 Load Balancer Device Packets Inpackets/secMonitors the number of packets per second received by the specified device.[F5-BIGIP-GLOBAL-MIB::gtmDeviceStatPktsPerSecIn:1.3.6.1.4.1.3375.2.3.15.2.3.1.7]

F5 BIG IP Hardware Status

Description

Monitors the F5-LB system chassis fan status,chassis power supply status,chassis temperature,blade temperature,blade voltage,CPU fan speed and CPU temperature.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
F5-LB System Blade Temperaturef5lb.system.blade.temperatureSystem Blade TemperatureCMonitors the blade temperature (in Celsius) of the indexed sensor on the system.[OIDs: 1.3.6.1.4.1.3375.2.1.3.2.4.2.1.3,1.3.6.1.4.1.3375.2.1.3.2.4.2.1.2]
F5-LB System Blade Voltagef5lb.system.blade.voltageSystem Blade VoltagemVMonitors the blade voltage (in mV) of the indexed sensor on the system.[OID: 1.3.6.1.4.1.3375.2.1.3.2.5.2.1.2]
F5-LB System Chassis Fan Statusf5lb.system.chasisfan.statusF5 LB System Chassis Fan StatusThe status of the indexed chassis fan on the system. This is only supported for the platform where the sensor data is available. Possible values are 0- Bad,1- Good,3- Not Present. Alert is generated when the chassis fan status is equal to 0- Bad [OIDs: 1.3.6.1.4.1.3375.2.1.3.2.1.2.1.1,1.3.6.1.4.1.3375.2.1.3.2.1.2.1.2]
F5-LB System Chassis Power Supply Statusf5lb.system.chasispowersupply.statusF5 LB System Chassis Power Supply StatusProvides the status of the indexed power supply on the system. Possible values are 0- Bad,1- Good,2- Not Present. This is only supported for the platform where the sensor data is available.[OIDs: 1.3.6.1.4.1.3375.2.1.3.2.2.2.1.2]
F5-LB System Chassis Temperaturef5lb.system.chassis.temperatureSystem Chassis TemperatureCMonitors the chassis temperature (in Celsius) of the indexed sensor on the system.[OID: 1.3.6.1.4.1.3375.2.1.3.2.3.2.1.2]
F5-LB System CPU Temp and Fan Speedf5lb.system.cpu.temperatureSystem CPU TemperatureCMonitors the temperature of the indexed CPU on the system. This is only supported for the platform where the sensor data is available.[OID: 1.3.6.1.4.1.3375.2.1.3.6.2.1.2]
f5lb.system.cpu.fanspeedSystem CPU Fan SpeedrpmMonitors the fan speed (in RPM) of the indexed CPU on the system. This is only supported for the platform where the sensor data is available.[OID: 1.3.6.1.4.1.3375.2.1.3.6.2.1.3]

F5 BIG IP Interface Statistics

Description

Monitors the F5-LB system interface errors in,errors out,drops in,drops out,traffic in,traffic out,utilization in and utilization out.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
F5-LB System Interface Statsf5lb.system.interface.traffic.inSystem Interface Traffic InbpsMonitors the total number of octets received on the interface,including framing characters. In this metric raw value from the interface will be captured which comes in bytes and will be converted to bits using the expression.[OID: 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.6]
f5lb.system.interface.traffic.outSystem Interface Traffic OutbpsMonitors the total number of octets transmitted out of the interface,including framing characters. In this metric raw value from the interface will be captured which comes in bytes and will be converted to bits using the expression.[OID: 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.10]
f5lb.system.interface.utilization.inSystem Interface Utilization In%This metric calculates the network traffic in utilization. To calculate this,Interface speed is required. Raw interface speed is captured from interface and expression calculates the incoming utilization percentage based on the Traffic in metric.[OIDs: 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.14,1.3.6.1.4.1.3375.2.1.2.4.5.3.1.6]
f5lb.system.interface.utilization.outSystem Interface Utilization Out%This metric calculates the system interface traffic out utilization. To calculate this,Interface speed is required. Interface speed is considered as input for this expression calculates the outgoing utilization percentage based on the Traffic out metric.[OIDs: 1.3.6.1.4.1.3375.2.1.2.4.5.3.1.14,1.3.6.1.4.1.3375.2.1.2.4.5.3.1.10]
f5lb.system.interface.errors.inSystem Interface Errors Inpacket/minMonitors the number of received packets that are either undersized,oversized,or have FCS errors by the specified interface. Raw values from the interface is captured and the expression converts it to minutes.[OID: 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.8]
f5lb.system.interface.errors.outSystem Interface Errors Outpacket/minMonitors the number of excessive collisions,incremented for each frame that experienced 16 collisions during transmission and was aborted on the specified interface. Raw values from the interface is captured and the expression converts it to minutes.[OID: 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.9]
f5lb.system.interface.drops.inSystem Interface Drops Inpacket/minMonitors the number of packets dropped on ingress for various reasons on the specified interface.[OID: 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.10]
f5lb.system.interface.drops.outSystem Interface Drops Outpacket/minMonitors the number of packets aged out or with excessive transmission delays due to multiple deferrals on the specified interface.[OID: 1.3.6.1.4.1.3375.2.1.2.4.4.3.1.11]

F5 BIG IP Local Traffic Management Statistics

Description

Monitors the Local Traffic Manager (LTM) statistics like Virtual Server Client Throughput,Virtual Server Status,Virtual Server Usage,LTM Pool Status and Node Status.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
F5-LB LTM Pool Statusf5lb.pool.avail.stateLTM Pool Availability StatusThe availability of the specified pool indicated in color. 0: none - error; 1: green - available in some capacity; 2: yellow - not currently available; 3: red - not available; 4: blue - availability is unknown; 5: gray - unlicensed. Alert will be generated when availability status not equals to 1,4.[OIDs: 1.3.6.1.4.1.3375.2.2.5.5.2.1.1,1.3.6.1.4.1.3375.2.2.5.5.2.1.2,1.3.6.1.4.1.3375.2.2.5.5.2.1.5]
F5-LB LTM Virtual Server Statusf5lb.virtualserver.avail.stateLTM Virtual Server Availability StateThe availability of the specified virtual server indicated in color. 0-none - error; 1-green - available in some capacity; 2-yellow - not currently available; 3-red - not available; 4-blue - availability is unknown; 5-gray - unlicensed.[OIDs: 1.3.6.1.4.1.3375.2.2.10.13.2.1.1,1.3.6.1.4.1.3375.2.2.10.13.2.1.2,1.3.6.1.4.1.3375.2.2.10.13.2.1.5]
F5-LB LTM Virtual Server Usage and Client Throughputf5lb.virtualserver.client.throughputVirtual Server Client ThroughputBpsMonitors the virtual server client throughput.[OIDs: 1.3.6.1.4.1.3375.2.2.10.2.3.1.1,1.3.6.1.4.1.3375.2.2.10.2.3.1.7,1.3.6.1.4.1.3375.2.2.10.2.3.1.9]
f5lb.virtualserver.usageVirtual Server Usage%Monitors the percentage of time Virtual Server was busy over the last 5 minutes.[OID: 1.3.6.1.4.1.3375.2.2.10.2.3.1.33]
F5-LB Node Statusf5lb.node.avail.stateNode Address Availability StatusThe availability of the specified node address indicated in color. 0- none - error; 1- green - available in some capacity; 2- yellow - not currently available; 3- red - not available; 4- blue - availability is unknown; 5- gray - unlicensed.[OIDs: 1.3.6.1.4.1.3375.2.2.4.3.2.1.2,1.3.6.1.4.1.3375.2.2.4.3.2.1.3,1.3.6.1.4.1.3375.2.2.4.3.2.1.6]

F5 BIG IP Local Traffic Management Statistics - v2

Description

Monitors the Local Traffic Manager (LTM) statistics like Virtual Server Client Throughput,Virtual Server Status,Virtual Server Usage,LTM Pool Status and Node Status. Similar to previous version,added one additional dependency metric,i.e pool enabled state

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
F5-LB LTM Pool Status - v2f5lb.pool.enabled.stateLTM Pool Activity StatusThe activity status of the specified pool,as specified by the user.[OIDs: 1.3.6.1.4.1.3375.2.2.5.5.2.1.1,1.3.6.1.4.1.3375.2.2.5.5.2.1.3]
f5lb.pool.avail.stateLTM Pool Availability StatusThe availability of the specified pool indicated in color. 0: none - error; 1: green - available in some capacity; 2: yellow - not currently available; 3: red - not available; 4: blue - availability is unknown; 5: gray - unlicensed. Alert will be generated when availability status not equals to 1,4.[OIDs: 1.3.6.1.4.1.3375.2.2.5.5.2.1.1,1.3.6.1.4.1.3375.2.2.5.5.2.1.2,1.3.6.1.4.1.3375.2.2.5.5.2.1.5]
F5-LB LTM Virtual Server Statusf5lb.virtualserver.avail.stateLTM Virtual Server Availability StateThe availability of the specified virtual server indicated in color. 0-none - error; 1-green - available in some capacity; 2-yellow - not currently available; 3-red - not available; 4-blue - availability is unknown; 5-gray - unlicensed.[OIDs: 1.3.6.1.4.1.3375.2.2.10.13.2.1.1,1.3.6.1.4.1.3375.2.2.10.13.2.1.2,1.3.6.1.4.1.3375.2.2.10.13.2.1.5]
F5-LB LTM Virtual Server Usage and Client Throughputf5lb.virtualserver.client.throughputVirtual Server Client ThroughputBpsMonitors the virtual server client throughput.[OIDs: 1.3.6.1.4.1.3375.2.2.10.2.3.1.1,1.3.6.1.4.1.3375.2.2.10.2.3.1.7,1.3.6.1.4.1.3375.2.2.10.2.3.1.9]
f5lb.virtualserver.usageVirtual Server Usage%Monitors the percentage of time Virtual Server was busy over the last 5 minutes.[OID: 1.3.6.1.4.1.3375.2.2.10.2.3.1.33]
F5-LB Node Statusf5lb.node.avail.stateNode Address Availability StatusThe availability of the specified node address indicated in color. 0- none - error; 1- green - available in some capacity; 2- yellow - not currently available; 3- red - not available; 4- blue - availability is unknown; 5- gray - unlicensed.[OIDs: 1.3.6.1.4.1.3375.2.2.4.3.2.1.2,1.3.6.1.4.1.3375.2.2.4.3.2.1.3,1.3.6.1.4.1.3375.2.2.4.3.2.1.6]

F5 BIG IP Server Performance Statistics

Description

Template to monitor the F5 BIG IP load balancer server performance statistics like cpu usage,throughput,total connections and availibility state.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
F5 BIG IP Server Availability Statef5lb_server_GtmServerStatusAvailStateF5 Load Balancer Server Availability StatusMonitors the availability state of the specified server.[F5-BIGIP-GLOBAL-MIB::gtmServerStatusAvailState:1.3.6.1.4.1.3375.2.3.9.3.2.1.2]
F5 BIG IP Server Performance Statisticsf5lb_server_GtmServerStatPktsPerSecInF5 Load Balancer Server Packets Inpackets/secMonitors the the number of packets per second received by the specified server.[F5-BIGIP-GLOBAL-MIB::gtmServerStatPktsPerSecIn:1.3.6.1.4.1.3375.2.3.9.2.3.1.8]
f5lb_server_GtmServerStatPktsPerSecOutF5 Load Balancer Server Packet Outpackets/secMonitors the the number of packets per second sent from the specified server.[F5-BIGIP-GLOBAL-MIB::gtmServerStatPktsPerSecOut:1.3.6.1.4.1.3375.2.3.9.2.3.1.9]
f5lb_server_GtmServerStatConnectionsF5 Load Balancer Server Total ConnectionscountMonitors the number of total connections to the specified server.[F5-BIGIP-GLOBAL-MIB::gtmServerStatConnections:1.3.6.1.4.1.3375.2.3.9.2.3.1.10]
f5lb_server_GtmServerStatCpuUsageF5 Load Balancer Server CPU Usage%Monitors the F5 load balancer server CPU usage.[F5-BIGIP-GLOBAL-MIB::gtmServerStatCpuUsage:1.3.6.1.4.1.3375.2.3.9.2.3.1.4]

F5 BIG IP System Performance

Description

Monitors the F5 Load Balancer system statistics like global HTTP stats,throughputs,TMM stats,System trunk stats,server SSL profile stats,client SSL profile stats,authentication stats and device connections.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
F5-LB Authentication Statsf5lb.system.auth.current.sessionsF5 LB Concurrent Auth SessionsMonitors the current number of concurrent auth sessions.[OID: 1.3.6.1.4.1.3375.2.1.1.2.2.3]
f5lb.system.auth.failure.resultsF5 LB Auth Failure ResultsMonitors the total number of auth failure results (That is when an unsuccessful authorization operation has completed).[OID: 1.3.6.1.4.1.3375.2.1.1.2.2.6.0]
F5-LB Device Connectionsf5lb.client.connections.totalClient Total ConnectionspsecThe total connections from client-side to the system.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.7.0]
f5lb.client.connections.currentClient Current ConnectionsThe current connections from client-side to the system.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.8.0]
f5lb.ssl.cur.native.connsSSL Current Native ConnectionsThe current number of concurrent native connections with established SSL sessions being maintained by the filter.[OID: 1.3.6.1.4.1.3375.2.1.1.2.9.4]
f5lb.ssl.cur.compat.connsSSL Current Compat ConnectionsThe current number of concurrent compat connections with established SSL sessions being maintained by the filter [OID: 1.3.6.1.4.1.3375.2.1.1.2.9.7.0]
f5lb.server.sslconnections.totalF5 LB Server SSL Connections TotalpsecMonitors the total number of server ssl connections.[OIDs: 1.3.6.1.4.1.3375.2.1.1.2.10.9.0,1.3.6.1.4.1.3375.2.1.1.2.10.6.0]
f5lb.connections.server.to.systemF5 LB Total Connections From Server To SystempsecMonitors the total connections from server-side to the system.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.14]
f5lb.current.virtualconnections.tcpF5 LB TCP Virtual ConnectionspsecMonitors the number of tcp connections established.[OID: 1.3.6.1.4.1.3375.2.1.1.2.12.8.0]
f5lb.client.newconn.accepts.summaryClient Accepts SummarypsecMonitors the summary of number of connections accepted.[OID: 1.3.6.1.4.1.3375.2.1.1.2.12.6.0]
f5lb.client.sslconnections.totalF5 LB Client SSL Connections TotalpsecMonitors the total (compact + native) number of client ssl connections.[OIDs: 1.3.6.1.4.1.3375.2.1.1.2.9.6.0,1.3.6.1.4.1.3375.2.1.1.2.9.9.0]
f5lb.server.connections.currentServer Current ConnectionsMonitors the current connections from server-side to the system.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.15.0]
f5lb.sslclient.connections.currentSSL Client Current ConnectionsMonitors the current number of concurrent connections with established SSL sessions being maintained by the filter.[OID: 1.3.6.1.4.1.3375.2.1.1.2.9.2.0]
f5lb.sslserver.connections.currentSSL Server Current ConnectionsMonitors the current number of concurrent connections with established SSL sessions being maintained by the filter.[OID: 1.3.6.1.4.1.3375.2.1.1.2.10.2.0]
F5-LB LTM Client SSL Profile Statsf5lb.client.ssl.handshakefailuresClient SSL Handshake FailuresMonitors the total number of handshake failures.[OID: 1.3.6.1.4.1.3375.2.2.6.2.2.3.1.29]
f5lb.client.ssl.badrecordsClient SSL Bad RecordsMonitors the total number of the bad records.[OIDs: 1.3.6.1.4.1.3375.2.2.6.2.2.3.1.30]
F5-LB LTM Server SSL Profile Statsf5lb.server.ssl.handshakefailuresServer SSL Handshake FailuresMonitors the total number of server ssl handshake failures.[OID: 1.3.6.1.4.1.3375.2.2.6.3.2.3.1.29]
f5lb.server.ssl.badrecordsServer SSL Bad RecordsMonitors the total number of the server ssl bad records.[OID: 1.3.6.1.4.1.3375.2.2.6.3.2.3.1.30]
F5-LB System Trunk Statsf5lb.trunk.collisionsTrunk CollisionspsecThe rate of collisions on the specified trunk,incremented by the number of collisions experienced during transmissions of a frame.[OID: 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.12]
f5lb.trunk.drops.inTrunk Drops InpsecThe rate of packets dropped on ingress for various reasons on the specified trunk.[OID: 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.10]
f5lb.trunk.drops.outTrunk Drops InpsecThe rate of packets dropped on ingress for various reasons on the specified trunk.[OID: 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.10]
f5lb.trunk.bytes.inTrunk Bytes InBpsThe rate of bytes received on the specified trunk.[OID: 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.3]
f5lb.trunk.bytes.outTrunk Bytes OutBpsThe rate of bytes transmitted out of the specified trunk.[OID: 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.5]
f5lb.trunk.errors.inTrunk Errors InpsecThe rate of received packets that are either undersized,oversized,or have FCS errors by the specified trunk.[OID: 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.8]
f5lb.trunk.errors.outTrunk Errors OutpsecThe rate of excessive collisions,incremented for each frame that experienced 16 collisions during transmission and was aborted on the specified trunk.[OID: 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.9]
F5-LB Throughputsf5lb.client.bytes.inClient Bytes InBpsThe rate of bytes received by the system from client-side.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.3.0]
f5lb.client.bytes.outClient Bytes OutBpsThe rate of bytes sent to client-side from the system.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.5.0]
f5lb.server.bytes.inServer Bytes InBpsThe rate of bytes received by the system from server-side.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.10.0]
f5lb.server.bytes.outServer Bytes OutBpsThe rate of bytes sent to server-side from the system.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.12.0]
F5-LB TM Global HTTP Statsf5lb.http.requests.totalF5 LB Total HTTP RequestsMonitors the total number of HTTP requests.[OIDs: 1.3.6.1.4.1.3375.2.1.1.2.4.7.0]
f5lb.http.get.requestsF5 LB Total HTTP Get RequestsMonitors the total number of HTTP get requests.[OID: 1.3.6.1.4.1.3375.2.1.1.2.4.8.0]
f5lb.http.post.requestsF5 LB Total HTTP Post RequestsMonitors the total number of HTTP post requests.[OID: 1.3.6.1.4.1.3375.2.1.1.2.4.9.0]
F5-LB TMM Statsf5lb.tmm.server.bytes.inTMM Server Bytes InBpsThe rate of bytes received by the system from server-side.[OID: 1.3.6.1.4.1.3375.2.1.8.2.3.1.14]
f5lb.tmm.server.bytes.outTMM Server Bytes OutBpsThe rate of bytes sent to server-side from the system.[OID: 1.3.6.1.4.1.3375.2.1.8.2.3.1.16]

F5 Load Balancer Template

Description

Template for F5 Load Balancer. Monitors memory utilization,disk utilization,process count check,power supply status,fan status,virtual server status,pool status,node status and uptime.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
F5-LB Authentication Statsf5lb.system.auth.current.sessionsF5 LB Concurrent Auth SessionsMonitors the current number of concurrent auth sessions.[OID: 1.3.6.1.4.1.3375.2.1.1.2.2.3]
f5lb.system.auth.failure.resultsF5 LB Auth Failure ResultsMonitors the total number of auth failure results (That is when an unsuccessful authorization operation has completed).[OID: 1.3.6.1.4.1.3375.2.1.1.2.2.6.0]
F5-LB Device Connectionsf5lb.client.connections.totalClient Total ConnectionspsecThe total connections from client-side to the system.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.7.0]
f5lb.client.connections.currentClient Current ConnectionsThe current connections from client-side to the system.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.8.0]
f5lb.ssl.cur.native.connsSSL Current Native ConnectionsThe current number of concurrent native connections with established SSL sessions being maintained by the filter.[OID: 1.3.6.1.4.1.3375.2.1.1.2.9.4]
f5lb.ssl.cur.compat.connsSSL Current Compat ConnectionsThe current number of concurrent compat connections with established SSL sessions being maintained by the filter [OID: 1.3.6.1.4.1.3375.2.1.1.2.9.7.0]
f5lb.server.sslconnections.totalF5 LB Server SSL Connections TotalpsecMonitors the total number of server ssl connections.[OIDs: 1.3.6.1.4.1.3375.2.1.1.2.10.9.0,1.3.6.1.4.1.3375.2.1.1.2.10.6.0]
f5lb.connections.server.to.systemF5 LB Total Connections From Server To SystempsecMonitors the total connections from server-side to the system.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.14]
f5lb.current.virtualconnections.tcpF5 LB TCP Virtual ConnectionspsecMonitors the number of tcp connections established.[OID: 1.3.6.1.4.1.3375.2.1.1.2.12.8.0]
f5lb.client.newconn.accepts.summaryClient Accepts SummarypsecMonitors the summary of number of connections accepted.[OID: 1.3.6.1.4.1.3375.2.1.1.2.12.6.0]
f5lb.client.sslconnections.totalF5 LB Client SSL Connections TotalpsecMonitors the total (compact + native) number of client ssl connections.[OIDs: 1.3.6.1.4.1.3375.2.1.1.2.9.6.0,1.3.6.1.4.1.3375.2.1.1.2.9.9.0]
f5lb.server.connections.currentServer Current ConnectionsMonitors the current connections from server-side to the system.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.15.0]
f5lb.sslclient.connections.currentSSL Client Current ConnectionsMonitors the current number of concurrent connections with established SSL sessions being maintained by the filter.[OID: 1.3.6.1.4.1.3375.2.1.1.2.9.2.0]
f5lb.sslserver.connections.currentSSL Server Current ConnectionsMonitors the current number of concurrent connections with established SSL sessions being maintained by the filter.[OID: 1.3.6.1.4.1.3375.2.1.1.2.10.2.0]
F5-LB LTM Client SSL Profile Statsf5lb.client.ssl.handshakefailuresClient SSL Handshake FailuresMonitors the total number of handshake failures.[OID: 1.3.6.1.4.1.3375.2.2.6.2.2.3.1.29]
f5lb.client.ssl.badrecordsClient SSL Bad RecordsMonitors the total number of the bad records.[OIDs: 1.3.6.1.4.1.3375.2.2.6.2.2.3.1.30]
F5-LB LTM Server SSL Profile Statsf5lb.server.ssl.handshakefailuresServer SSL Handshake FailuresMonitors the total number of server ssl handshake failures.[OID: 1.3.6.1.4.1.3375.2.2.6.3.2.3.1.29]
f5lb.server.ssl.badrecordsServer SSL Bad RecordsMonitors the total number of the server ssl bad records.[OID: 1.3.6.1.4.1.3375.2.2.6.3.2.3.1.30]
F5-LB System Trunk Statsf5lb.trunk.collisionsTrunk CollisionspsecThe rate of collisions on the specified trunk,incremented by the number of collisions experienced during transmissions of a frame.[OID: 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.12]
f5lb.trunk.drops.inTrunk Drops InpsecThe rate of packets dropped on ingress for various reasons on the specified trunk.[OID: 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.10]
f5lb.trunk.drops.outTrunk Drops InpsecThe rate of packets dropped on ingress for various reasons on the specified trunk.[OID: 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.10]
f5lb.trunk.bytes.inTrunk Bytes InBpsThe rate of bytes received on the specified trunk.[OID: 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.3]
f5lb.trunk.bytes.outTrunk Bytes OutBpsThe rate of bytes transmitted out of the specified trunk.[OID: 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.5]
f5lb.trunk.errors.inTrunk Errors InpsecThe rate of received packets that are either undersized,oversized,or have FCS errors by the specified trunk.[OID: 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.8]
f5lb.trunk.errors.outTrunk Errors OutpsecThe rate of excessive collisions,incremented for each frame that experienced 16 collisions during transmission and was aborted on the specified trunk.[OID: 1.3.6.1.4.1.3375.2.1.2.12.2.3.1.9]
F5-LB Throughputsf5lb.client.bytes.inClient Bytes InBpsThe rate of bytes received by the system from client-side.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.3.0]
f5lb.client.bytes.outClient Bytes OutBpsThe rate of bytes sent to client-side from the system.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.5.0]
f5lb.server.bytes.inServer Bytes InBpsThe rate of bytes received by the system from server-side.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.10.0]
f5lb.server.bytes.outServer Bytes OutBpsThe rate of bytes sent to server-side from the system.[OID: 1.3.6.1.4.1.3375.2.1.1.2.1.12.0]
F5-LB TM Global HTTP Statsf5lb.http.requests.totalF5 LB Total HTTP RequestsMonitors the total number of HTTP requests.[OIDs: 1.3.6.1.4.1.3375.2.1.1.2.4.7.0]
f5lb.http.get.requestsF5 LB Total HTTP Get RequestsMonitors the total number of HTTP get requests.[OID: 1.3.6.1.4.1.3375.2.1.1.2.4.8.0]
f5lb.http.post.requestsF5 LB Total HTTP Post RequestsMonitors the total number of HTTP post requests.[OID: 1.3.6.1.4.1.3375.2.1.1.2.4.9.0]
F5-LB TMM Statsf5lb.tmm.server.bytes.inTMM Server Bytes InBpsThe rate of bytes received by the system from server-side.[OID: 1.3.6.1.4.1.3375.2.1.8.2.3.1.14]
f5lb.tmm.server.bytes.outTMM Server Bytes OutBpsThe rate of bytes sent to server-side from the system.[OID: 1.3.6.1.4.1.3375.2.1.8.2.3.1.16]
F5-LB System Chassis Fan Statusf5lb.system.chasisfan.statusF5 LB System Chassis Fan StatusThe status of the indexed chassis fan on the system. This is only supported for the platform where the sensor data is available. Possible values are 0- Bad,1- Good,3- Not Present. Alert is generated when the chassis fan status is equal to 0- Bad [OIDs: 1.3.6.1.4.1.3375.2.1.3.2.1.2.1.1,1.3.6.1.4.1.3375.2.1.3.2.1.2.1.2]
F5-LB System Chassis Power Supply Statusf5lb.system.chasispowersupply.statusF5 LB System Chassis Power Supply StatusProvides the status of the indexed power supply on the system. Possible values are 0- Bad,1- Good,2- Not Present. This is only supported for the platform where the sensor data is available.[OIDs: 1.3.6.1.4.1.3375.2.1.3.2.2.2.1.2]
F5-LB System CPU Utilizationf5lb.multihost.system.cpu.utilF5 LB Multi Host System CPU Utilization%Monitors the average usage ratio of CPU for the associated host in the last five minutes. It is calculated by (sum of detals for user,niced,system)/(sum of deltas of user,niced,system,idle,irq,softirq,and iowait),where each delta is the difference for each stat over the last 5-minute interval; [user: sysMultiHostCpuUser5m; niced: sysMultiHostCpuNiced5m; system: sysMultiHostCpuSystem5m; idle: sysMultiHostCpuIdle5m; irq: sysMultiHostCpuIrq5m; iowait: sysMultiHostCpuIowait5m].[OIDs: 1.3.6.1.4.1.3375.2.1.7.5.2.1.1,1.3.6.1.4.1.3375.2.1.7.5.2.1.2,1.3.6.1.4.1.3375.2.1.7.5.2.1.35]
F5-LB System Host Disk Utilizationf5lb.system.host.disk.utilF5 LB System Host Disk Utilization%Provides F5 Load Balancer percentage of space used on disk.[OIDs: 1.3.6.1.4.1.3375.2.1.7.3.2.1.1,1.3.6.1.4.1.3375.2.1.7.3.2.1.3,1.3.6.1.4.1.3375.2.1.7.3.2.1.4]
f5lb.system.host.filenode.utilF5 LB System Host Disk File Node Utilization%Provides F5 Load Balancer disk file node utilization.[OIDs: 1.3.6.1.4.1.3375.2.1.7.3.2.1.1,1.3.6.1.4.1.3375.2.1.7.3.2.1.5,1.3.6.1.4.1.3375.2.1.7.3.2.1.6]
F5-LB System Memory Utilizationf5lb.system.host.memory.utilizationF5 LB System Host Memory Utilization%Provides the F5 Load Balancer system host memory utilization (not including TMM).[OIDs: 1.3.6.1.4.1.3375.2.1.7.1.1.0,1.3.6.1.4.1.3375.2.1.7.1.2.0]
f5lb.tmm.memory.utilizationF5 LB System TMM Memory Utilization%Provides the F5 Load Balancer system TMM memory utilization.[OIDs: 1.3.6.1.4.1.3375.2.1.1.2.1.44.0,1.3.6.1.4.1.3375.2.1.1.2.1.45.0]
F5-LB System Uptimef5lb.system.uptimeF5 LB System UptimesProvides the F5 Load Balancer system up time in seconds since boot.[OIDs: 1.3.6.1.4.1.3375.2.1.6.6.0,1.3.6.1.4.1.3375.2.1.6.1.0]
Process Count Check - UCD-SNMP-MIBprocess.count.checkProcess Count CheckAn Error flag to indicate trouble with a process. Possible values are 0- No Error,1- Error. Alert is generated when the error flag is set to 1- Error.[OIDs: 1.3.6.1.4.1.2021.2.1.2,1.3.6.1.4.1.2021.2.1.100,1.3.6.1.4.1.2021.2.1.101]

F5-LB FCS Errors

Description

Template to monitor F5 Load Balancer FCS Errors. Delta = Previous value of sysDot3StatFcsErrors is subtracted from Current value of sysDot3StatFcsErrors.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
F5-LB FCS Errors - Deltaf5lb.fcs.errorsFCS ErrorsA counter delta (Current_poll_count - Prev_poll_count) of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include frames received with frame-too-long or frame-too-short error.[F5-BIGIP-SYSTEM-MIB::sysDot3StatFcsErrors - 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.3,sysDot3StatName - 1.3.6.1.4.1.3375.2.1.2.11.1.3.1.1]

Fiberstore Switch Performance

Description

Template to monitor the Fiberstore Switch performance statistics like Memory utilization and CPU utilization.[FIBERSTORE-MIB :: memTotalFree : 1.3.6.1.4.1.52642.1.1.1.11.0,memTotalUsed : 1.3.6.1.4.1.52642.1.1.1.12.0,fiveMinutes : 1.3.6.1.4.1.52642.1.1.9.3.0]

Prerequisites

Device must have support for FIBERSTORE-MIB

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fiberstore Switch - Performancefiberstore_switch_MemoryUtilizationFiberstore Switch Memory Utilization%Monitors the Fiberstore Switch Memory Utilization.[FIBERSTORE-MIB :: memTotalFree : 1.3.6.1.4.1.52642.1.1.1.11.0,memTotalUsed : 1.3.6.1.4.1.52642.1.1.1.12.0]
fiberstore_switch_CpuFiveMinutesFiberstore Switch CPU Utilization FiveMinutes%Monitors the CPU usage within five minutes.[FIBERSTORE-MIB :: fiveMinutes : 1.3.6.1.4.1.52642.1.1.9.3.0]

Fiberstore Switch Hardware

Description

Template to monitor the Fiberstore Switch hardware statistics like Fan status,fan speed,Power status,Slot Status and Transeiver current Status.[FIBERSTORE-MIB :: devMFanStatus : 1.3.6.1.4.1.52642.1.37.1.1.1.1.4,devMFanSpeed : 1.3.6.1.4.1.52642.1.37.1.1.1.1.5,devMPowerStatus : 1.3.6.1.4.1.52642.1.37.1.2.1.2,lswSlotStatus : 1.3.6.1.4.1.52642.1.37.1.5.1.5,transceiveStatus : 1.3.6.1.4.1.52642.1.37.1.10.1.1.11]

Prerequisites

Device must have support for FIBERSTORE-MIB

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fiberstore Switch - Powerfiberstore_switch_PowerStatusFiberstore Switch Power StatusMonitors the Fiberstore Switch Power Status.[FIBERSTORE-MIB :: devMPowerStatus : 1.3.6.1.4.1.52642.1.37.1.2.1.2] Possible values are : 1 : present,2 : absent,3 : unsupport.
fiberstore_switch_SlotStatusFiberstore Switch Slot StatusMonitors the Fiberstore Switch Slot Status. Include absent,creating,initing,syncing,fail,ready,uninit,conflict.[FIBERSTORE-MIB :: lswSlotStatus : 1.3.6.1.4.1.52642.1.37.1.5.1.5]
fiberstore_switch_TransceiverStatusFiberstore Switch Transceiver StatusMonitors the FiberStore Switch Transeiver current Status.[FIBERSTORE-MIB :: transceiveStatus : 1.3.6.1.4.1.52642.1.37.1.10.1.1.11]
fiberstore_switch_FanStatusFiberstore Switch Fan StatusMonitors the Fiberstore Switch Fan Status.[FIBERSTORE-MIB :: devMFanStatus : 1.3.6.1.4.1.52642.1.37.1.1.1.1.4] Possible values are : 1 : active,2 : deactive,3 : notInstall,4 : unsupport.
fiberstore_switch_FanSpeedFiberstore Switch Fan Speed%Monitors the Fiberstore Switch Fan Speed.[FIBERSTORE-MIB :: devMFanSpeed : 1.3.6.1.4.1.52642.1.37.1.1.1.1.5]

Fiberstore Switch Vlan

Description

Template to monitors the Fiberstore Switch Vlan status,row status,if config,packets in and out,bytes in and out and status en.[FIBERSTORE-MIB :: vlanStatus : 1.3.6.1.4.1.52642.1.11.1.1.1.3,vlanRowStatus : 1.3.6.1.4.1.52642.1.11.1.1.1.4,vlanIfConfig : 1.3.6.1.4.1.52642.1.11.1.1.1.5,vlanStatsPktIn : 1.3.6.1.4.1.52642.1.11.1.1.1.7,vlanStatsPktOut : 1.3.6.1.4.1.52642.1.11.1.1.1.8,vlanStatsByteIn : 1.3.6.1.4.1.52642.1.11.1.1.1.9,vlanStatsByteOut : 1.3.6.1.4.1.52642.1.11.1.1.1.10,vlanStatsEn : 1.3.6.1.4.1.52642.1.11.1.1.1.11]

Prerequisites

Device must have support for FIBERSTORE-MIB

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fiberstore Switch - Vlanfiberstore_switch_VlanStatusFiberstore Switch Vlan StatusMonitors the VLAN Status[FIBERSTORE-MIB :: vlanStatus : 1.3.6.1.4.1.52642.1.11.1.1.1.3] Possible values are : 1 : inactive,2 : active.
fiberstore_switch_VlanStatsPktInFiberstore Switch Vlan Packets Inpackets/secMonitors the Ingress packtes number of Vlan.[FIBERSTORE-MIB :: vlanStatsPktIn : 1.3.6.1.4.1.52642.1.11.1.1.1.7]
fiberstore_switch_VlanStatsPktOutFiberstore Switch Vlan Packets Outpackets/secMonitors the Egress packtes number of Vlan.[FIBERSTORE-MIB :: vlanStatsPktOut : 1.3.6.1.4.1.52642.1.11.1.1.1.8]
fiberstore_switch_VlanStatsByteInFiberstore Switch Vlan Bytes InBpsMonitors the Ingress bytes number of Vlan.[FIBERSTORE-MIB :: vlanStatsByteIn : 1.3.6.1.4.1.52642.1.11.1.1.1.9]
fiberstore_switch_VlanStatsByteOutFiberstore Switch Vlan Bytes OutBpsMonitors the Egress bytes number of Vlan.[FIBERSTORE-MIB :: vlanStatsByteOut : 1.3.6.1.4.1.52642.1.11.1.1.1.10]

Fiber Channel Connection Unit Status - G2

Description

Applicable on Fiber channel SAN switches like HP Storage Works 2000 Modular Smart Array or Brocade or Qlogic SAN devices. Monitors the Status of connection unit,sensors and ports.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fiber Channel Connection Unit Portfiberchannel.connection.unit.portstatusConnection Unit Port StatusMonitors the overall protocol status for the port. Possible values are 1- unknown,2- unused,3- ready,4- warning,5- failure,6- notparticipating,7- initializing,8- bypass,9- ols.[OIDs: 1.3.6.1.3.94.1.10.1.2,1.3.6.1.3.94.1.10.1.15,1.3.6.1.3.94.1.10.1.6,1.3.6.1.3.94.1.10.1.7]
fiberchannel.connection.unit.porthwstateConnection Unit Port Hardware StateMonitors the hardware detected state of the port. Possible values are 1- unknown,2- failed,3- bypassed,4- active,5- loopback,6- txfault,7- noMedia,8- linkDown.[OIDs: 1.3.6.1.3.94.1.10.1.2,1.3.6.1.3.94.1.10.1.15,1.3.6.1.3.94.1.10.1.7,1.3.6.1.3.94.1.10.1.23]
Fiber Channel Connection Unit Sensor Statusfiberchannel.connection.unit.sensorstatusConnection Unit Sensor StatusMonitors the status indicated by the sensor. Possible values are 1- unknown,2- other,3- ok,4- warning,5- failed.[OIDs: 1.3.6.1.3.94.1.8.1.4,1.3.6.1.3.94.1.8.1.1,1.3.6.1.3.94.1.8.1.3,1.3.6.1.3.94.1.8.1.6]
Fiber Channel Connection Unit Statusfiberchannel.connection.unit.statusConnection Unit StatusMonitors the Overall status of the connectivity unit. The goal of this object is to be the single poll point to check the status of the connunit. Possible values are 1- unknown,2- unused,3- ok,4- warning,5- failed.[OIDs: 1.3.6.1.3.94.1.6.1.20,1.3.6.1.3.94.1.6.1.6]

Fiber Channel Fabric Element Status - G2

Applicable on all Fiber channel devices that support the FIBER-CHANNEL-FE-MIB. Monitors the status of the fiber channel modules,port statistics like traffic rate on the port fiber elements,port status etc.,

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fiber channel FE Module Statusfiberchannel.module.statusFiber Channel Module StatusMonitors the operational status of the fiber channel fabric element module. Possible values are 1- online: the module is functioning properly,2- offline: the module is not available,3- testing: the module is under testing and 4- faulty: the module is defective in some way.[OIDs: 1.3.6.1.2.1.75.1.1.4.1.2,1.3.6.1.2.1.75.1.1.4.1.4]
Fiber Channel FE Port Statsfiberchannel.port.statusFiber Channel Port Operational StatusMonitors the operational status of fiber channel port.[OIDs: 1.3.6.1.2.1.75.1.1.5.1.2,1.3.6.1.2.1.75.1.2.2.1.1,1.3.6.1.2.1.75.1.2.2.1.2]
fiberchannel.port.linkfailuresFiber Channel Port Link FailurespsecMonitors the number of link failures detected by this FxPort.[OID: 1.3.6.1.2.1.75.1.3.1.1.1]
fiberchannel.port.synclossesFiber Channel Port Sync LossespsecMonitors the number of loss of synchronization detected by the FxPort.[OID: 1.3.6.1.2.1.75.1.3.1.1.2]
fiberchannel.port.siglossesFiber Channel Port Signal LossespsecMonitors the number of loss of signal detected by the FxPort.[OID: 1.3.6.1.2.1.75.1.3.1.1.3]
fiberchannel.port.invalidcrcFiber Channel Port Invalid CRCspsecMonitors the number of invalid CRC detected by this FxPort.[OID: 1.3.6.1.2.1.75.1.3.1.1.6]
fiberchannel.port.invalidtxwordsFiber Channel Port Invalid Tx WordspsecMonitors the number of invalid transmission word detected by the FxPort.[OID: 1.3.6.1.2.1.75.1.3.1.1.5]
fiberchannel.port.offlineseq.inFiber Channel Port Received Offline SequencespsecMonitors the number of Offline Sequence received by this FxPort.[OID: 1.3.6.1.2.1.75.1.3.1.1.11]
fiberchannel.port.offlineseq.outFiber Channel Port Issued Offline SequencespsecMonitors the number of Offline Sequence issued by this FxPort.[OID: 1.3.6.1.2.1.75.1.3.1.1.12]
fiberchannel.port.c3frames.inFiber Channel Port Class 3 Frames InpsecMonitors the number of Class 3 frames received by this FxPort from its attached NxPort.[OID: 1.3.6.1.2.1.75.1.4.3.1.1]
fiberchannel.port.c3frames.outFiber Channel Port Class 3 Frames OutpsecMonitors the number of Class 3 frames delivered through this FxPort to its attached NxPort.[OID: 1.3.6.1.2.1.75.1.4.3.1.2]
fiberchannel.port.c3frame.discardsFiber Channel Port Class 3 Frame DiscardspsecMonitors number of Class 3 frames discarded by this FxPort.[OID: 1.3.6.1.2.1.75.1.4.3.1.5]
fiberchannel.port.available.buffersFiber Channel Port Available BuffersMonitors the number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control.[OID: 1.3.6.1.2.1.75.1.2.1.1.2]
Fiber Channel Max FE Modulesfiberchannel.fabric.modules.maxFiber Channel Fabric Modules MaxMonitors the maximum number of modules in the Fabric Element,regardless of their current state.[OIDs: 1.3.6.1.2.1.75.1.1.1.0,1.3.6.1.2.1.75.1.1.2.0,1.3.6.1.2.1.75.1.1.3.0]

Fluentd

Description

Template to monitor the Fluentd attributes like Retry Count,Buffer Queue Length,Total Buffer Queued Size. Validated on Fluentd v4.6.5

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fluentdfluentd.buffer_total_queued_sizeFluentd Total Buffer Queued SizeBytesThe size of the buffer queue for this plugin.
fluentd.retry_countFluentd Retry countNULLThe number of retries for this plugin.
fluentd.buffer_queue_lengthFluentd Buffer Queue LengthNULLThe length of the buffer queue for this plugin.

Fortinet Fortiadc

Description

Template to monitor Instantaneous System Memory Usage,Instantaneous System Log Disk Usage,Instantaneous System Load,CPU 5min Avg Usage,CPU Temperature,Device Temperature,Device Fan Speed,Device Fan Status,Disk State,Milli Voltage,Power Supply Voltage,GLB(Global Load Balancer) Server Status,Clientside Throughput,Clientside SSL Throughput,Concurrent Client SSL Sessions,SLB Hit Certificate Percentage,SLB Cache Hit Bytes.

Prerequisites

The device should have support for FORTINET-FORTIADC-MIB

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fortinet Fortiadc - Client-side Statisticsfortinet.fortiadc.clientside.throughputClient-side ThroughputIt monitors the client-side throughput ingress and egress.[FORTINET-FORTIADC-MIB::fadcClientSideThroughput:1.3.6.1.4.1.12356.112.8.5.5].
fortinet.fortiadc.clientside.ssl.throughputClient-side SSL ThroughputIt monitors the client-side SSL-only (encrypted) throughput.[FORTINET-FORTIADC-MIB::fadcClientSideSSLThroughput:1.3.6.1.4.1.12356.112.8.5.6].
fortinet.fortiadc.concurrent.client.ssl.sessionsConcurrent Client SSL SessionsIt monitors the concurrent client-side SSL sessions[FORTINET-FORTIADC-MIB::fadcConcurrentClientSSLSessions:1.3.6.1.4.1.12356.112.8.5.8].
Fortinet Fortiadc - CPU Temperaturefortinet.fortiadc.cpu.temperatureCPU TemperatureCelsiusIt monitors the air temperature of the host CPU.[FORTINET-FORTIADC-MIB::fadcCPUTemp:1.3.6.1.4.1.12356.112.6.1.1.1.3].
Fortinet Fortiadc - CPU Usagefortinet.fortiadc.cpu.5min.avg.usageCPU 5min Avg Usage%It monitors the average of cpu usage in 5 min[FORTINET-FORTIADC-MIB::fadcCpu5minAvgUsage:1.3.6.1.4.1.12356.112.1.40.1.5].
Fortinet Fortiadc - Device Temperaturefortinet.fortiadc.device.temperatureDevice TemperatureCelsiusIt monitors the air temperature of the device.[FORTINET-FORTIADC-MIB::fadcDeviceTempValue:1.3.6.1.4.1.12356.112.6.4.1.1.1.3].
Fortinet Fortiadc - Disk Statusfortinet.fortiadc.disk.stateDisk StateIt monitors the state of disk.[FORTINET-FORTIADC-MIB::fadcDiskState:1.3.6.1.4.1.12356.112.6.5.5]
Fortinet Fortiadc - Fanfortinet.fortiadc.device.fan.speedDevice Fan SpeedrpmIt monitors the device fan speed.[FORTINET-FORTIADC-MIB::fadcDeviceFanSpeed:1.3.6.1.4.1.12356.112.6.4.2.1.1.3].
fortinet.fortiadc.device.fan.statusDevice Fan StatusIt monitors the device fan tray status.[FORTINET-FORTIADC-MIB::fadcDeviceFanStatus:1.3.6.1.4.1.12356.112.6.4.2.1.1.4].
Fortinet Fortiadc - GLB Server Statusfortinet.fortiadc.glb.server.statusGLB(Global Load Balancer) Server StatusIt monitors the status of specified GLB server.[FORTINET-FORTIADC-MIB::fadcGLBServerStatus:1.3.6.1.4.1.12356.112.8.4.2.1.1.3].
Fortinet Fortiadc - SLB SSL Cache Utilfortinet.fortiadc.slb.hit.cert.percentSLB Hit Certificate Percentage%It monitors the SLB(Server Load Balacing) certificate cache hit percentage of specified virtual server.[FORTINET-FORTIADC-MIB::fadcSLBHitCertPercentage:1.3.6.1.4.1.12356.112.8.5.20.1.1.11]
fortinet.fortiadc.slb.cache.hit.bytesSLB Cache Hit BytesBytesIt monitors the SLB(Server Load Balacing) cache hit bytes of specified virtual server.[FORTINET-FORTIADC-MIB::fadcSLBCacheHitBytes:1.3.6.1.4.1.12356.112.8.5.20.1.1.6]
Fortinet Fortiadc - System Performancefortinet.fortiadc.sys.mem.usageInstantaneous System Memory Usage%It monitors the instantaneous memory utilization.[FORTINET-FORTIADC-MIB::fadcSysMemUsage:1.3.6.1.4.1.12356.112.1.5].
fortinet.fortiadc.sys.log.disk.usageInstantaneous System Log Disk Usage%It monitors the instantaneous log disk usage.[FORTINET-FORTIADC-MIB::fadcSysLogDiskUsage:1.3.6.1.4.1.12356.112.1.6]
fortinet.fortiadc.sys.loadInstantaneous System LoadIt monitors the instantaneous system load.[FORTINET-FORTIADC-MIB::fadcSysLoad:1.3.6.1.4.1.12356.112.1.30]
Fortinet Fortiadc - Voltagefortinet.fortiadc.voltageMilli VoltagemVIt monitors the milli-voltage value.[FORTINET-FORTIADC-MIB::fadcVoltage:1.3.6.1.4.1.12356.112.6.6]
fortinet.fortiadc.powersupply.voltagePower Supply VoltagevIt monitors the system power supply voltage value.[FORTINET-FORTIADC-MIB::fadcPowerSupplyVoltage:1.3.6.1.4.1.12356.112.6.7]

Fortinet Fortigate - Hardware Sensor Status

Description

Provides the list of device specific hardware sensors status.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fortinet Fortigate Hardware Sensor Statusfortinet_fortigate_FgHwSensorEntAlarmStatusFortinet Fortigate Hardware Sensor Alarm StatusProvides the fortinet fortigate hardware sensor alarm status.[FORTINET-FORTIGATE-MIB::fgHwSensorEntAlarmStatus:1.3.6.1.4.1.12356.101.4.3.2.1.4]

Fortinet Fortigate VPN Tunnel Status

Description

Template to monitor the current status of tunnel (up or down).[FORTINET-FORTIGATE-MIB :: fgVpnTunEntStatus : 1.3.6.1.4.1.12356.101.12.2.2.1.20,fgVpnTunEntPhase2Name : 1.3.6.1.4.1.12356.101.12.2.2.1.3]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fortinet Fortigate VPN Tunnel Statusfortigate_vpn_TunnelStatusFortigate VPN Tunnel StatusMonitors the current status of tunnel (up or down).[FORTINET-FORTIGATE-MIB :: fgVpnTunEntStatus : 1.3.6.1.4.1.12356.101.12.2.2.1.20].Possible values are down(1),up(2).

Fortinet FortiSwitch - Performance

Description

Template to monitor the Fortinet Fortiswitch for CPU,Memory and Disk utilization as a part of performance metrics.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fortinet FortiSwitch Performancefortinet_FortiSwitch_FsSysCpuUtilizationFortinet FortiSwitch System CPU Utilization%Monitors the fortinet fortiswitch system CPU utilization.[FORTINET-FORTISWITCH-MIB::fsSysCpuUsage:1.3.6.1.4.1.12356.106.4.1.2.0]
fortinet_FortiSwitch_FsSysMemUtilizationFortinet FortiSwitch System Memory Utilization%Monitors the fortinet fortiswitch system memory utilization.[FORTINET-FORTISWITCH-MIB::fsSysMemUsage:1.3.6.1.4.1.12356.106.4.1.3.0,fsSysMemCapacity:1.3.6.1.4.1.12356.106.4.1.4.0]
fortinet_FortiSwitch_FsSysDiskUtilizationFortinet FortiSwitch System Disk Utilization%Monitors the fortinet fortiswitch system disk utilization.[FORTINET-FORTISWITCH-MIB::fsSysDiskUsage:1.3.6.1.4.1.12356.106.4.1.5.0,fsSysDiskCapacity:1.3.6.1.4.1.12356.106.4.1.6.0]

Fortinet FortiWeb - Performance

Description

Template to monitor the Fortinet FortiWeb firewall for CPU,Memory and Disk utilization as a part of performance metrics

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fortinet FortiWeb Performancefortinet_fortiweb_fwSysCpuUtilizationFortinet FortiWeb System CPU Utilization%Monitors the fortinet fortiweb system CPU utilization.[FORTINET-FORTIWEB-MIB::fwSysCpuUsage:1.3.6.1.4.1.12356.107.2.1.5.0]
fortinet_Fortiweb_fwSysDiskUtilizationFortinet FortiWeb System Disk Utilization%Monitors the fortinet fortiweb system disk utilization.[FORTINET-FORTIWEB-MIB::fwSysDiskUsage:1.3.6.1.4.1.12356.107.2.1.9.0,fwSysDiskCapacity:1.3.6.1.4.1.12356.107.2.1.10.0]
fortinet_fortiweb_fwSysMemUtilizationFortinet FortiWeb System Memory Utilization%Monitors the fortinet fortiweb system memory utilization.[FORTINET-FORTIWEB-MIB::fwSysMemUsage:1.3.6.1.4.1.12356.107.2.1.7.0,fwSysMemCapacity:1.3.6.1.4.1.12356.107.2.1.8.0]

Fortinet-Fortigate-FortiAnalyzer and FortiManager Performance

Description

Template for Fortinet Fortigate firewall based - specific applications - such as FM (fortiManager) and FA (FortiAnalyzer)

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fortinet FortiManager Performance Monitorsfortimanager.system.cpu.utilizationFortinet FortiManager CPU Utilization%This monitor provides the current CPU utilization in percentage. Alert is generated when the utlization exceeds the given threshold.[OID : 1.3.6.1.4.1.12356.103.2.1.1]
fortimanager.system.disk.utilizationFortinet FortiManager Disk Utilization%This monitor provides the current disk utilization from the total hard disk capacity in percentage. Alert is generated when the utlization exceeds the threshold percentage.[OID : 1.3.6.1.4.1.12356.103.2.1.4,1.3.6.1.4.1.12356.103.2.1.5]
fortimanager.system.memory.utilizationFortinet FortiManager Memory Utilization%This monitor provides the current memory utilization from the total physical and swap memory installed in percentage. Alert is generated when the utiliation exceeds the threshold percentage.[OID : 1.3.6.1.4.1.12356.103.2.1.2,1.3.6.1.4.1.12356.103.2.1.3]

Fortinet-Fortigate-FW-HA Cluster Performance

Description

Template to monitor Fortinet Fortigate Firewall High Availability cluster unit performance metrics like CPU usage,Memory usage,Network bandwidth utilization,Session count and cluster sync status. This template is created on FORTINET-FORTIGATE-MIB OIDs and validated on FGT_301E [SysObjId: 1.3.6.1.4.1.12356.101.1.3008]

Prerequisites

Device should respond for FORTINET-FORTIGATE-MIB::fgHaStatsTable OID

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fortinet Fortigate High Availability Cluster Performance - Extfortinet.fortigate.ha.stats.cpu.utilFortigate HA CPU Utlization%Provides the Fortinet Fortigate HA stats CPU utilization percentage of the specified cluster member [OID: 1.3.6.1.4.1.12356.101.13.2.1.1.3]
fortinet.fortigate.ha.stats.memory.utilFortigate HA Memory Utlization%Provides the Fortinet Fortigate memory utilization percentage of the specified cluster member [OID: 1.3.6.1.4.1.12356.101.13.2.1.1.4]
fortinet.fortigate.ha.stats.network.utilFortigate HA Network UtlizationKbpsProvides the Fortinet Fortigate network bandwidth usage of specified cluster member (in kbps) [FORTINET-FORTIGATE-MIB::fgHaStatsNetUsage - 1.3.6.1.4.1.12356.101.13.2.1.1.5]
fortinet.fortigate.ha.stat.session.countFortigate HA Session CountIt represents the current session count of specified cluster member.[FORTINET-FORTIGATE-MIB::fgHaStatsSesCount - 1.3.6.1.4.1.12356.101.13.2.1.1.6]
fortinet.fortigate.ha.stat.sync.statusFortigate HA Cluster Sync StatusRepresents the current ha cluster sync status. Possible status values are 0 - unsynchronized and 1- synchronized.[FORTINET-FORTIGATE-MIB::fgHaStatsSyncStatus - 1.3.6.1.4.1.12356.101.13.2.1.1.12]

Fortinet-Fortigate-FW-Statistics

Description

Template to monitor Fortinet Fortigate Firewall Anti-virus statistics,IPS/IDS statistics and Web-filter statistics for a particular virtual domain. This template is created on FORTINET-FORTIGATE-MIB OIDs and validated on FGT_301E [SysObjId: 1.3.6.1.4.1.12356.101.1.3008]

Prerequisites

Device should respond for FORTINET-FORTIGATE-MIB OIDs.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fortinet Fortigate Intrusion - With Component VD Namefortinet.fortigate.intrusion.detectedFortinet Fortigate Intrusion DetectedProvides the Fortinet Fortigate number of intrusions detected since start-up in this virtual domain [OID: 1.3.6.1.4.1.12356.101.9.2.1.1.1,1.3.6.1.4.1.12356.101.9.2.1.1.2]
fortinet.fortigate.intrusions.blockedFortinet Fortigate Intrusions BlockedNumber of intrusions blocked since start-up in this virtual domain.[OID : 1.3.6.1.4.1.12356.101.9.2.1.1.2]
Fortinet Fortigate Virus - With Component VD Namefortinet.fortigate.virus.detectedFortinet Fortigate Virus DetectedProvides the Fortinet Fortigate number of virus transmissions detected in the virtual domain since start-up.[OID : 1.3.6.1.4.1.12356.101.8.2.1.1.1]
fortinet.fortigate.virus.blockedFortinet Fortigate Virus BlockedProvides the Fortinet Fortigate umber of virus transmissions blocked in the virtual domain since start-up [OID: 1.3.6.1.4.1.12356.101.8.2.1.1.2].
Fortinet Fortigate Webfilter Stats - With Component VD Namefortinet.webfilter.http.sessions.blockedFortinet Webfilter HTTP Sessions BlockedProvides the Fortinet Fortigate number of HTTP sessions blocked by Web-filter since start-up.[OID : 1.3.6.1.4.1.12356.101.10.1.2.1.1.1]
fortinet.webfilter.https.sessions.blockedFortinet Webfilter HTTPS Sessions BlockedProvides the Fortinet Fortigate number of HTTPS sessions blocked by Web-filter since start-up.[OID : 1.3.6.1.4.1.12356.101.10.1.2.1.1.2]
fortinet.webfilter.http.urls.blockedFortinet Webfilter HTTP URLs BlockedProvides the Fortinet Fortigate number of HTTP URLS blocked by Web-filter since start-up.[OID : 1.3.6.1.4.1.12356.101.10.1.2.1.1.3]
fortinet.webfilter.https.urls.blockedFortinet Webfilter HTTPS URLs BlockedProvides the Fortinet Fortigate number of HTTPS URLS blocked by Web-filter since start-up .[OID : 1.3.6.1.4.1.12356.101.10.1.2.1.1.4]

Fortinet-Fortigate-FW-System Performance

Description

Template to monitor Fortinet Fortigate Firewall System performance parameters like CPU utilization,Memory utilization,Disk utilization,Active Sessions and Low Memory Utilization. This template is created on FORTINET-FORTIGATE-MIB OIDs and validated on FGT_301E [SysObjId: 1.3.6.1.4.1.12356.101.1.3008]

Prerequisites

Device should respond for FORTINET-FORTIGATE-MIB OIDs.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fortinet Fortigate Performance Monitors - Extfortinet.fortigate.cpu.utilizationFortigate CPU Utilization%Provides the Fortinet Fortigate CPU Utilization percentage [OID: 1.3.6.1.4.1.12356.101.4.1.3.0]
fortinet.fortigate.memory.utilizationFortigate Memory Utilization%Provides the Fortinet Fortigate current memory utilization (percentage) and total physical memory (RAM) installed (KB) [OID: 1.3.6.1.4.1.12356.101.4.1.4.0,1.3.6.1.4.1.12356.101.4.1.5.0]
fortinet.fortigate.disk.utilizationFortigate Disk Utilization%Provides the Fortinet Fortigate total hard disk capacity (MB),if disk is present and current hard disk usage (MB) and disk utilization percentage [OID: 1.3.6.1.4.1.12356.101.4.1.7.0,1.3.6.1.4.1.12356.101.4.1.6.0]
fortinet.fortigate.sessions.countActive SessionsIt represents the number of active sessions on the device.[FORTINET-FORTIGATE-MIB::fgSysSesCount.0 - 1.3.6.1.4.1.12356.101.4.1.8.0]
fortinet.fortigate.low.memory.utilizationLow Memory Utilization%It represents current lowmem utilization (percentage). Lowmem is memory available for the kernel's own data structures and kernel specific tables. The system can get into a bad state if it runs out of lowmem.[FORTINET-FORTIGATE-MIB::fgSysLowMemUsage.0 - 1.3.6.1.4.1.12356.101.4.1.9.0,fgSysLowMemCapacity.0 - 1.3.6.1.4.1.12356.101.4.1.10.0]

Fortinet Fortigate License Expiry Monitor - Ext

Description

Monitors the Fortinet Fortigate Contract License Expiry Time and Version License Expiry Time in Days.[ FORTINET-FORTIGATE-MIB :: fgLicContractExpiry : 1.3.6.1.4.1.12356.101.4.6.3.1.2.1.2, fgLicVersionExpiry : 1.3.6.1.4.1.12356.101.4.6.3.2.2.1.2 ]

Note: “For these metrics, we are receiving the expiry time in both ‘Date Format’ and ‘n/a’ string formats directly from the End Device. To monitor the Contract License Expiry Time and Version License Expiry Time in days, we are disregarding the metrics that contain ‘n/a’ values and returning the remaining metric values in days”. Validated on Fortinet Firewall FortiGate-60E v6.4.10,build2000,220824 (GA.M) [ SysObjectOID :: 1.3.6.1.4.1.12356.101.1.641 ]

Prerequisites

Device must have support for FORTINET-FORTIGATE-MIB

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fortinet Fortigate License Expiry Monitor - Extfortinet_fortigate_ContractLicenseExpiryFortinet Fortigate Contract License ExpiryDaysMonitors the Fortinet Fortigate Contract License Expiry Time in Days.[ FORTINET-FORTIGATE-MIB :: fgLicContractExpiry : 1.3.6.1.4.1.12356.101.4.6.3.1.2.1.2 ]
Note: "For this metric, we are receiving the expiry time in both 'Date Format' and 'n/a' string formats directly from the End Device. To monitor the Contract License Expiry Time in days, we are disregarding the metrics that contain 'n/a' values and returning the remaining metric values in days."
fortinet_fortigate_VersionLicenceExpiryFortinet Fortigate Version License ExpiryDaysMonitors the Fortinet Fortigate Version License Expiry Time in Days. [ FORTINET-FORTIGATE-MIB :: fgLicVersionExpiry : 1.3.6.1.4.1.12356.101.4.6.3.2.2.1.2]
Note: "For this metric, we are receiving the expiry time in both 'Date Format' and 'n/a' string formats directly from the End Device. To monitor the Version License Expiry Time in days, we are disregarding the metrics that contain 'n/a' values and returning the remaining metric values in days."

FTP Template

Description

FTP Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
FTP Monitorftp.transmit.timeFTP Transmit TimesFTP Transmit Time
ftp.receive.timeFTP Receive TimesFTP Receive Time
ftp.transmit.speedFTP Transmit SpeedBpsFTP Transmit Speed
ftp.receive.speedFTP Receive SpeedBpsFTP Receive Speed
ftp.response.timeFTP Response TimesResponse Time
ftp.service.statusFTP Service StatusNULLService Status UP 0 Down 1

FTP Template Monitor

Description

FTP Template Monitor

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
FTP Monitorftp.transmit.timeFTP Transmit TimesFTP Transmit Time
ftp.receive.timeFTP Receive TimesFTP Receive Time
ftp.transmit.speedFTP Transmit SpeedBpsFTP Transmit Speed
ftp.receive.speedFTP Receive SpeedBpsFTP Receive Speed
ftp.response.timeFTP Response TimesResponse Time
ftp.service.statusFTP Service StatusNULLService Status UP 0 Down 1

Fujitsu Raid Server Statistics

Description

Template to monitor the fujitsu raid server statistics like fujitsu raid logical drive status,fujitsu raid physical device status,fujitsu raid controller status,fujitsu raid server overall status.[FSC-RAID-MIB]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fujitsu Raid Controller Statusfujitsu_raid_svrCtrlStatusFujitsu Raid Server Controller StatusMonitors the fujitsu raid server controller status.[FSC-RAID-MIB::svrCtrlStatus:1.3.6.1.4.1.231.2.49.1.4.2.1.15].Possible values are ok(1),prefailure(2),failure(3)
fujitsu_raid_svrCtrlBBUStatusFujitsu Raid Server Controller Battery Backup Unit StatusMonitors the fujitsu raid server controller battery backup unit status.[FSC-RAID-MIB::svrCtrlBBUStatus:1.3.6.1.4.1.231.2.49.1.4.2.1.14].Possible values are notAvailable(1),onLine(2),onBattery(3)onBatteryLow(4),charging(5),discharging(6),failed(7).
fujitsu_raid_svrCtrlBBUStatusExFujitsu Raid Server Controller Battery Backup Unit Status EXMonitors the fujitsu raid server controller battery backup unit status EX.[FSC-RAID-MIB::svrCtrlBBUStatusEx:1.3.6.1.4.1.231.2.49.1.4.2.1.24].Possible values are unknown(1),notInstalled(2),normal(3),charging(4),discharging(5),warning(6),failed(7).
Fujitsu Raid Logical Drive Statusfujitsu_raid_svrLogicalDriveStatusExFujitsu Raid Server Logical Drive Status ExMonitors the Fujitsu Raid Server Logical Drive Status Ex[FSC-RAID-MIB::svrLogicalDriveStatusEx:1.3.6.1.4.1.231.2.49.1.6.2.1.19]. Possible values are unknown(1),operational(2),partiallyDegraded(3),degraded(4),failed(5),rebuilding(6),checking(7),mdcing(8),initializing(9),backgroundInitializing(10),migrating(11),copying(12),offline(13),spareInUse(14),erasing(15).
fujitsu_raid_svrLogicalDriveStatusFujitsu Raid Server Logical Drive StatusMonitors the fujitsu raid Server logical drive status.[FSC-RAID-MIB::svrLogicalDriveStatus:1.3.6.1.4.1.231.2.49.1.6.2.1.10].Possible values are unknown(1),online(2),degraded(3),offline(4),rebuilding(5),verifying(6),initializing(7),morphing(8),partialDegraded(9)
fujitsu_raid_svrLogicalDriveInitStatusFujitsu Raid Server Logical Drive Initialization StatusMonitors the fujitsu raid server logical drive initialization status.[FSC-RAID-MIB::svrLogicalDriveInitStatus:1.3.6.1.4.1.231.2.49.1.6.2.1.18]. Possible values are unknown(1),initialized(2),notInitialized(3).
fujitsu_raid_svrLogicalDriveTotalSizeFujitsu Raid Server Logical Drive Total SizeGBMonitors the fujitsu raid server logical drive total size.[FSC-RAID-MIB::svrLogicalDriveTotalSize:1.3.6.1.4.1.231.2.49.1.6.2.1.4]
Fujitsu Raid Physical Device Statusfujitsu_raid_svrPhysicalDeviceErrorsFujitsu Raid Server Physical Device ErrorscountMonitors the fujitsu raid server physical device errors.[FSC-RAID-MIB::svrPhysicalDeviceErrors:1.3.6.1.4.1.231.2.49.1.5.2.1.12]
fujitsu_raid_SvrPhysicalDeviceStatusFujitsu Raid Server Physical Device StatusMonitors the fujitsu raid server physical device status.[FSC-RAID-MIB::svrPhysicalDeviceStatus:1.3.6.1.4.1.231.2.49.1.5.2.1.15]. Possible values are unknown(1),noDisk(2),online(3),ready(4),failed(5),rebuilding(6),hotspareGlobal(7),hotspareDedicated(8),offline(9),unconfiguredFailed(10),formatting(11),dead(12).
fujitsu_raid_svrPhysicalDevicePowerStatusFujitsu Raid Server Physical Device Power StatusMonitors the fujitsu raid server physical device power status.[FSC-RAID-MIB::svrPhysicalDevicePowerStatus:1.3.6.1.4.1.231.2.49.1.5.2.1.25]. Possible values are active(1),stopped(2),transition(3).
fujitsu_raid_SvrPhysicalDeviceSmartStatusFujitsu Raid Server Physical Device Smart StatusMonitors the fujitsu raid server physical device status.[FSC-RAID-MIB::svrPhysicalDeviceSmartStatus:1.3.6.1.4.1.231.2.49.1.5.2.1.14].Possible values are ok(1),failurePredicted(2),smartNotAvailable(3),smartMonitoringDisabled(4)
fujitsu_raid_svrPhysicalDeviceCapacityFujitsu Raid Server Physical Device CapacityGBMonitors the Fujitsu raid server physical device capacity.[FSC-RAID-MIB::svrPhysicalDeviceCapacity:1.3.6.1.4.1.231.2.49.1.5.2.1.7].
fujitsu_raid_svrPhysicalDeviceStatusExFujitsu Raid Server Physical Device Status ExMonitors the fujitsu raid server physical device status Ex.[FSC-RAID-MIB::svrPhysicalDeviceStatusEx:1.3.6.1.4.1.231.2.49.1.5.2.1.20].Possible values are unknown(1),noDisk(2),available(3),operational(4),failed(5),rebuilding(6),globalHotSpare(7),dedicatedHotSpare(8),offline(9),unconfiguredFailed(10),failedMissing(11),copyBack(12),redundantCopy(13),waiting(14),preparing(15),migrating(16),jbod(17),shielded(18),clearing(19),erasing(20).
Fujitsu Raid Server Statusfujitsu_raid_svrStatusPhysicalDevicesFujitsu Raid Server Status Physical DevicesMonitors the Fujitsu raid server status physical devices.[FSC-RAID-MIB::svrStatusPhysicalDevices:1.3.6.1.4.1.231.2.49.1.3.2.0].Possible values are ok(1),prefailure(2),failure(3).
fujitsu_raid_svrStatusLogicalDrivesFujitsu Raid Server Status Logical DrivesMonitors the fujitsu raid server status logical drives.[FSC-RAID-MIB::svrStatusLogicalDrives:1.3.6.1.4.1.231.2.49.1.3.1].Possible values are ok(1),prefailure(2),failure(3).
fujitsu_raid_svrStatusOverallFujitsu Raid Server Status OverallMonitors the fujitsu raid server status overall.[FSC-RAID-MIB::svrStatusOverall:1.3.6.1.4.1.231.2.49.1.3.4].Possible values are ok(1),prefailure(2),failure(3).
fujitsu_raid_svrStatusControllersFujitsu Raid Server Status ControllersMonitors the fujitsu raid server status controllers.[FSC-RAID-MIB::svrStatusControllers:1.3.6.1.4.1.231.2.49.1.3.3.0].Possible values are ok(1),prefailure(2),failure(3).

Fujitsu Storage Disk Array E150

Description

Template to monitor Fujitsu Storage Disk Array parameters like BCU Status,BTU parameters like Status,Charge,BUD Status,Channel Adapter Status,Controller Enclosure Inlet Thermal Sensor Status,Controller Enclosure PSU Status,Controller Enclosure Status,Controller Enclosure Thermal Sensor Status,Controller Module CPU Status,Controller Module Fan Status,Controller Module Memory Status,Controller Module NAS Performance parameters like CPU Busy,Free Memory,disk parameters like Status,Component Status,Drive Enclosure Inlet Thermal Sensor Status,Drive Enclosure Status,Drive Enclosure Thermal Sensor Status,Enclosure Power,FEM Status,IOM Status,LAN Port parameters like MNT Port State,RMT Port State,FST Port State,Machine Temperature,Mgt Open Volume Status,Mgt Raid Group Status,Overall System Status,PFM Status,PSU Status,SCU parameters like Status,Voltage. This template is applicable on DX60 S3,DX100 S3,DX200,DX500 S3,DX600 S3,DX8100 S3,AF250,AF650.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fujitsu Disk Array - BCU Statusfujitsu_diskarray_BCUStatusFujitsu Disk Array BCU StatusIt monitors the state of this BTU/BBU. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryBcuStatus:1.3.6.1.4.1.211.1.21.1.150.2.7.2.1.3].
Fujitsu Disk Array - BTUfujitsu_diskarray_BTUChargeFujitsu Disk Array BTU Charge%It monitors the charge rate of BTU/BBU.[FJDARY-E150::fjdaryBtuCharge:1.3.6.1.4.1.211.1.21.1.150.2.8.2.1.5].
fujitsu_diskarray_BTUStatusFujitsu Disk Array BTU StatusIt monitors the state of this BTU/BBU. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryBtuStatus:1.3.6.1.4.1.211.1.21.1.150.2.8.2.1.3].
Fujitsu Disk Array - BUD Statusfujitsu_diskarray_BUDStatusFujitsu Disk Array BUD StatusIt monitors the state of this BUD. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryBudStatus:1.3.6.1.4.1.211.1.21.1.150.2.5.2.1.3].
Fujitsu Disk Array - Channel Adapter Statusfujitsu_diskarray_ChannelAdapterStatusFujitsu Disk Array Channel Adapter StatusIt monitors the state of this CA. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryCaStatus:1.3.6.1.4.1.211.1.21.1.150.2.3.2.1.3].
Fujitsu Disk Array - Controller Enclosure Inlet Thermal Sensor Statusfujitsu_diskarray_controllerenclosure_InletThermalSensorStatusFujitsu Disk Array Controller Enclosure Inlet Thermal Sensor StatusIt monitors the state of this CE inlet thermal sensor. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryCeinletthmlStatus:1.3.6.1.4.1.211.1.21.1.150.2.11.2.1.3].
Fujitsu Disk Array - Controller Enclosure PSU Statusfujitsu_diskarray_controllerenclosure_PSUStatusFujitsu Disk Array Controller Enclosure PSU StatusIt monitors the state of this CPSU. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryCpsuStatus:1.3.6.1.4.1.211.1.21.1.150.2.13.2.1.3].
Fujitsu Disk Array - Controller Enclosure Statusfujitsu_diskarray_controllerenclosure_StatusFujitsu Disk Array Controller Enclosure StatusIt monitors the state of this CE. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6)[FJDARY-E150::fjdaryCeStatus:1.3.6.1.4.1.211.1.21.1.150.2.10.2.1.3].
Fujitsu Disk Array - Controller Enclosure Thermal Sensor Statusfujitsu_diskarray_controllerenclosure_ThermalSensorStatusFujitsu Disk Array Controller Enclosure Thermal Sensor StatusIt monitors the state of this CE thermal sensor. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryCethmlStatus:1.3.6.1.4.1.211.1.21.1.150.2.12.2.1.3].
Fujitsu Disk Array - Controller Module CPU Statusfujitsu_diskarray_controllermodule_CPUStatusFujitsu Disk Array Controller Module CPU StatusIt monitors the state of this CM CPU. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryCmcpuStatus:1.3.6.1.4.1.211.1.21.1.150.2.2.2.1.3].
Fujitsu Disk Array - Controller Module Fan Statusfujitsu_diskarray_controllermodule_FanStatusFujitsu Disk Array Controller Module Fan StatusIt monitors the state of this CM fan. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryCmfanStatus:1.3.6.1.4.1.211.1.21.1.150.2.6.2.1.3].
Fujitsu Disk Array - Controller Module Memory Statusfujitsu_diskarray_controllermodule_MemoryStatusFujitsu Disk Array Controller Module Memory StatusIt monitors the state of this CM memory. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryCmmemoryStatus:1.3.6.1.4.1.211.1.21.1.150.2.4.2.1.3].
Fujitsu Disk Array - Controller Module NAS Performancefujitsu_diskarray_controllermodule_nas_CPUBusyFujitsu Disk Array Controller Module NAS CPU Busy%It monitors the average of CPU busy rate for NAS.[FJDARY-E150::fjdaryPfCmNasCPUBusy:1.3.6.1.4.1.211.1.21.1.150.5.16.2.1.12].
fujitsu_diskarray_controllermodule_nas_FreeMemoryFujitsu Disk Array Controller Module NAS Free MemoryMBIt monitors the unused amount of the memory.[FJDARY-E150::fjdaryPfCmNasFreeMemory:1.3.6.1.4.1.211.1.21.1.150.5.16.2.1.13].
Fujitsu Disk Array - Diskfujitsu_diskarray_DiskComponentStatusFujitsu Disk Array Disk Component StatusIt monitors the the state of this disk. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryDiskCompStatus:1.3.6.1.4.1.211.1.21.1.150.2.19.2.1.5].
fujitsu_diskarray_DiskStatusFujitsu Disk Array Disk StatusIt monitors the state of this Disk. But,it doesn't become warning or alarm when maintaining it. Possible values are available(1),broken(2),notavailable(3),notsupported(4),present(5),readying(6),recovering(7),partbroken(64),spare(65),formatting(66),unformatted(67),notexist(68),copying(69).[FJDARY-E150::fjdaryDiskStatus:1.3.6.1.4.1.211.1.21.1.150.2.19.2.1.3].
Fujitsu Disk Array - Drive Enclosure Inlet Thermal Sensor Statusfujitsu_diskarray_driveenclosure_InletThermalSensorStatusFujitsu Disk Array Drive Enclosure Inlet Thermal Sensor StatusIt monitors the state of this DE inlet thermal sensor. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryDeinletthmlStatus:1.3.6.1.4.1.211.1.21.1.150.2.17.2.1.3].
Fujitsu Disk Array - Drive Enclosure Statusfujitsu_diskarray_driveenclosure_StatusFujitsu Disk Array Drive Enclosure StatusIt monitors the state of this DE. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryDeStatus:1.3.6.1.4.1.211.1.21.1.150.2.14.2.1.3].
Fujitsu Disk Array - Drive Enclosure Thermal Sensor Statusfujitsu_diskarray_driveenclosure_ThermalSensorStatusFujitsu Disk Array Drive Enclosure Thermal Sensor StatusIt monitors the state of this DE thermal sensor. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryDethmlStatus:1.3.6.1.4.1.211.1.21.1.150.2.18.2.1.3].
Fujitsu Disk Array - Enclosure Powerfujitsu_diskarray_EnclosurePowerFujitsu Disk Array Enclosure PowerWIt monitors the average power consumption shown during one hour in the past.[FJDARY-E150::fjdaryEncPowerInfo0:1.3.6.1.4.1.211.1.21.1.150.13.2.2.1.7].
Fujitsu Disk Array - FEM Statusfujitsu_diskarray_FEMStatusFujitsu Disk Array FEM StatusIt monitors the state of this FEM. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryFemStatus:1.3.6.1.4.1.211.1.21.1.150.2.21.2.1.3].
Fujitsu Disk Array - IOM Statusfujitsu_diskarray_IOMStatusFujitsu Disk Array IOM StatusIt monitors the state of this IOM. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryIomStatus:1.3.6.1.4.1.211.1.21.1.150.2.15.2.1.3].
Fujitsu Disk Array - LAN Portfujitsu_diskarray_lanport_FSTPortStateFujitsu Disk Array LAN Port FST Port StateIt monitors the FST port state. Possible values are linkup(1),undefined(4),linkdown(6),unknown(7).[FJDARY-E150::fjdaryLanportStatus2:1.3.6.1.4.1.211.1.21.1.150.2.20.2.1.4].
fujitsu_diskarray_lanport_MNTPortStateFujitsu Disk Array LAN Port MNT Port StateIt monitors the MNT port state. Possible values are linkup(1),undefined(4),linkdown(6),unknown(7).[FJDARY-E150::fjdaryLanportStatus0:1.3.6.1.4.1.211.1.21.1.150.2.20.2.1.2].
fujitsu_diskarray_lanport_RMTPortStateFujitsu Disk Array LAN Port RMT Port StateIt monitors the RMT port state. Possible values are linkup(1),undefined(4),linkdown(6),unknown(7).[FJDARY-E150::fjdaryLanportStatus1:1.3.6.1.4.1.211.1.21.1.150.2.20.2.1.3].
Fujitsu Disk Array - Machine Temperaturefujitsu_diskarray_MachineTemperatureFujitsu Disk Array Machine TemperatureCelsiusIt monitors the maximum temperature shown during one hour in the past.[FJDARY-E150::fjdaryMachineTempInfo0:1.3.6.1.4.1.211.1.21.1.150.13.3.2.1.5].
Fujitsu Disk Array - Mgt Open Volume Statusfujitsu_diskarray_MgtOpenVolumeStatusFujitsu Disk Array Mgt Open Volume StatusIt monitors the status of open volume. Possible values are unknown(1),ok(2),degraded(3),error(6),dormant(15).[FJDARY-E150::fjdaryMgtOpVolumeStatus:1.3.6.1.4.1.211.1.21.1.150.14.2.2.1.2].
Fujitsu Disk Array - Mgt Raid Group Statusfujitsu_diskarray_MgtRaidGroupStatusFujitsu Disk Array Mgt Raid Group StatusIt monitors the status of raid group. Possible values are unknown(1),ok(2),degraded(3),error(6),dormant(15).[FJDARY-E150::fjdaryMgtRaidGrpStatus:1.3.6.1.4.1.211.1.21.1.150.14.3.2.1.2].
Fujitsu Disk Array - Overall System Statusfujitsu_diskarray_OverallSystemStatusFujitsu Disk Array Overall System StatusIt monitors the overall status of this system. Status becomes warning or failed when there are broken parts in the system. But,it doesn't become warning or failed when maintaining it. Possible values are unknown(1),unused(2),ok(3),warning(4),failed(5).[FJDARY-E150::fjdaryUnitStatus:1.3.6.1.4.1.211.1.21.1.150.6.0]
Fujitsu Disk Array - PFM Statusfujitsu_diskarray_PFMStatusFujitsu Disk Array PFM StatusIt monitors the state of this PFM. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryPfmStatus:1.3.6.1.4.1.211.1.21.1.150.2.22.2.1.3].
Fujitsu Disk Array - PSU Statusfujitsu_diskarray_PSUStatusFujitsu Disk Array PSU StatusIt monitors the state of this PSU. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryPsuStatus:1.3.6.1.4.1.211.1.21.1.150.2.16.2.1.3].
Fujitsu Disk Array - SCUfujitsu_diskarray_SCUVoltageFujitsu Disk Array SCU VoltagevIt monitors the voltage of this SCU.[FJDARY-E150::fjdaryScuVoltage:1.3.6.1.4.1.211.1.21.1.150.2.9.2.1.5].
fujitsu_diskarray_SCUStatusFujitsu Disk Array SCU StatusIt monitors the state of this SCU. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E150::fjdaryScuStatus:1.3.6.1.4.1.211.1.21.1.150.2.9.2.1.3].

Fujitsu Storage Disk Array E153

Description

Template to monitor Fujitsu Storage Disk Array parameters like BCU Status,BTU parameters like Status,Charge,BUD Status,Channel Adapter Status,Controller Enclosure Inlet Thermal Sensor Status,Controller Enclosure PSU Status,Controller Enclosure Status,Controller Enclosure Thermal Sensor Status,Controller Module CPU Status,Controller Module Fan Status,Controller Module Memory Status,disk parameters like Status,Component Status,Drive Enclosure Inlet Thermal Sensor Status,Drive Enclosure Status,Drive Enclosure Thermal Sensor Status,Enclosure Power,FEM Status,IOM Status,LAN Port parameters like MNT Port State,RMT Port State,FST Port State,Machine Temperature,Mgt Open Volume Status,Mgt Raid Group Status,Overall System Status,PSU Status,Mgt Disk Status,Mgt Disk Comp Status,Mgt Pf Disk Busy Rate,Pf Disk Busy Rate,Pf CPU Busy Rate.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Fujitsu Disk Array E153 - Pf Controller Module CPUfujitsu_diskarray_e153_PfCmBusyFujitsu Disk Array Pf CPU Busy Rate%It represents the the average of CPU busy rate.[FJDARY-E153 :: fjdaryPfCmBusy : 1.3.6.1.4.1.211.1.21.1.153.5.4.2.1.2]
Fujitsu Disk Array E153 - Pf Diskfujitsu_diskarray_e153_PfDiskBusyFujitsu Disk Array Pf Disk Busy Rate%it monitors the disk busy rate in percent.[FJDARY-E153 :: fjdaryPfDiskBusy : 1.3.6.1.4.1.211.1.21.1.153.5.3.2.1.3]
Fujitsu Disk Array E153 - BTUfujitsu_diskarray_e153_BTUStatusFujitsu Disk Array BTU StatusIt monitors the state of this BTU/BBU. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryBtuStatus : 1.3.6.1.4.1.211.1.21.1.153.2.8.2.1.3]
fujitsu_diskarray_e153_BTUChargeFujitsu Disk Array BTU Charge%It monitors the charge rate of BTU/BBU.[FJDARY-E153 :: fjdaryBtuCharge : 1.3.6.1.4.1.211.1.21.1.153.2.8.2.1.5]
Fujitsu Disk Array E153 - BUD Statusfujitsu_diskarray_e153_BUDStatusFujitsu Disk Array BUD StatusIt monitors the state of this BUD. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryBudStatus : 1.3.6.1.4.1.211.1.21.1.153.2.5.2.1.3]
Fujitsu Disk Array E153 - Channel Adapter Statusfujitsu_diskarray_e153_ChannelAdapterStatusFujitsu Disk Array Channel Adapter StatusIt monitors the state of this CA. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryCaStatus : 1.3.6.1.4.1.211.1.21.1.153.2.3.2.1.3]
Fujitsu Disk Array E153 - Controller Enclosure Inlet Thermal Sensor Statusfujitsu_diskarray_e153_ControllerEnclosureInletThermalSensorStatusFujitsu Disk Array Controller Enclosure Inlet Thermal Sensor StatusIt monitors the state of this CE inlet thermal sensor. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryCeinletthmlStatus : 1.3.6.1.4.1.211.1.21.1.153.2.11.2.1.3]
Fujitsu Disk Array E153 - Controller Enclosure PSU Statusfujitsu_diskarray_e153_ControllerEnclosurePSUStatusFujitsu Disk Array Controller Enclosure PSU StatusIt monitors the state of this CPSU. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryCpsuStatus : 1.3.6.1.4.1.211.1.21.1.153.2.13.2.1.3]
Fujitsu Disk Array E153 - Controller Enclosure Statusfujitsu_diskarray_e153_ControllerEnclosureStatusFujitsu Disk Array Controller Enclosure Statust monitors the state of this CE. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryCeStatus : 1.3.6.1.4.1.211.1.21.1.153.2.10.2.1.3]
Fujitsu Disk Array E153 - Controller Enclosure Thermal Sensor Statusfujitsu_diskarray_e153_ControllerEnclosureThermalSensorStatusFujitsu Disk Array Controller Enclosure Thermal Sensor StatusIt monitors the state of this CE thermal sensor. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryCethmlStatus : 1.3.6.1.4.1.211.1.21.1.153.2.12.2.1.3]
Fujitsu Disk Array E153 - Controller Module CPU Statusfujitsu_diskarray_e153_ControllerModuleCPUStatusFujitsu Disk Array Controller Module CPU StatusIt monitors the state of this CM CPU. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryCmcpuStatus : 1.3.6.1.4.1.211.1.21.1.153.2.2.2.1.3]
Fujitsu Disk Array E153 - Controller Module Memory Statusfujitsu_diskarray_e153_ControllerModuleMemoryStatusFujitsu Disk Array Controller Module Memory StatusIt monitors the state of this CM memory. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryCmmemoryStatus : 1.3.6.1.4.1.211.1.21.1.153.2.4.2.1.3]
Fujitsu Disk Array E153 - Controller Module Statusfujitsu_diskarray_e153_ControllerModuleStatusFujitsu Disk Array Controller Module StatusIt monitors the status of Controller Module. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryCmStatus : 1.3.6.1.4.1.211.1.21.1.153.2.1.2.1.3]
Fujitsu Disk Array E153 - Diskfujitsu_diskarray_e153_DiskComponentStatusFujitsu Disk Array Disk Component StatusIt monitors the the state of this disk. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryDiskCompStatus : 1.3.6.1.4.1.211.1.21.1.153.2.19.2.1.5]
fujitsu_diskarray_e153_DiskStatusFujitsu Disk Array Disk StatusIt monitors the state of this Disk. But,it doesn't become warning or alarm when maintaining it. Possible values are available(1),broken(2),notavailable(3),notsupported(4),present(5),readying(6),recovering(7),partbroken(64),spare(65),formatting(66),unformatted(67),notexist(68),copying(69).[FJDARY-E153 :: fjdaryDiskStatus : 1.3.6.1.4.1.211.1.21.1.153.2.19.2.1.3]
Fujitsu Disk Array E153 - Drive Enclosure Inlet Thermal Sensor Statusfujitsu_diskarray_e153_DriveEnclosureInletThermalSensorStatusFujitsu Disk Array Drive Enclosure Inlet Thermal Sensor StatusIt monitors the state of this DE inlet thermal sensor. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryDeinletthmlStatus : 1.3.6.1.4.1.211.1.21.1.153.2.17.2.1.3]
Fujitsu Disk Array E153 - Drive Enclosure Statusfujitsu_diskarray_e153_DriveEnclosureStatusFujitsu Disk Array Drive Enclosure StatusIt monitors the state of this DE. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryDeStatus : 1.3.6.1.4.1.211.1.21.1.153.2.14.2.1.3]
Fujitsu Disk Array E153 - Drive Enclosure Thermal Sensor Statusfujitsu_diskarray_e153_DriveEnclosureThermalSensorStatusFujitsu Disk Array Drive Enclosure Thermal Sensor StatusIt monitors the state of this DE thermal sensor. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryDethmlStatus : 1.3.6.1.4.1.211.1.21.1.153.2.18.2.1.3]
Fujitsu Disk Array E153 - Enclosure Powerfujitsu_diskarray_e153_EnclosurePowerFujitsu Disk Array Enclosure PowerWIt monitors the average power consumption shown during one hour in the past.[FJDARY-E153 :: fjdaryEncPowerInfo0 : 1.3.6.1.4.1.211.1.21.1.153.13.2.2.1.7]
Fujitsu Disk Array E153 - FEM Statusfujitsu_diskarray_e153_FEMStatusFujitsu Disk Array FEM StatusIt monitors the state of this FEM. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryFemStatus : 1.3.6.1.4.1.211.1.21.1.153.2.21.2.1.3]
Fujitsu Disk Array E153 - IOM Statusfujitsu_diskarray_e153_IOMStatusFujitsu Disk Array IOM StatusIt monitors the state of this IOM. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryIomStatus : 1.3.6.1.4.1.211.1.21.1.153.2.15.2.1.3]
Fujitsu Disk Array E153 - Machine Temperaturefujitsu_diskarray_e153_MachineTemperatureFujitsu Disk Array Machine TemperatureCelsiusIt monitors the maximum temperature shown during one hour in the past.[FJDARY-E153 :: fjdaryMachineTempInfo0 : 1.3.6.1.4.1.211.1.21.1.153.13.3.2.1.5]
Fujitsu Disk Array E153 - Mgt Disk Statusfujitsu_diskarray_e153_MgtDiskStatusFujitsu Disk Array Mgt Disk StatusIt monitors the state of Mgt Disk. But,it doesn't become warning or alarm when maintaining it. Possible values are available(1),broken(2),notavailable(3),notsupported(4),present(5),readying(6),recovering(7),partbroken(64),spare(65),formatting(66),unformatted(67),notexist(68),copying(69).[FJDARY-E153 :: fjdaryMgtDiskStatus : 1.3.6.1.4.1.211.1.21.1.153.14.6.2.1.3]
fujitsu_diskarray_e153_MgtDiskCompStatusFujitsu Disk Array Mgt Disk Comp StatusIt monitors the the state of this disk. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryMgtDiskCompStatus : 1.3.6.1.4.1.211.1.21.1.153.14.6.2.1.5]
Fujitsu Disk Array E153 - Mgt Open Volume Statusfujitsu_diskarray_e153_MgtOpenVolumeStatusFujitsu Disk Array Mgt Open Volume StatusIt monitors the status of open volume. Possible values are unknown(1),ok(2),degraded(3),error(6),dormant(15).[FJDARY-E153 :: fjdaryMgtOpVolumeStatus : 1.3.6.1.4.1.211.1.21.1.153.14.2.2.1.2]
Fujitsu Disk Array E153 - Mgt Pf Diskfujitsu_diskarray_e153_MgtPfDiskBusyFujitsu Disk Array Mgt Pf Disk Busy Rate%It monitors the mgt pf disk busy rate.[FJDARY-E153 :: fjdaryMgtPfDiskBusy : 1.3.6.1.4.1.211.1.21.1.153.14.11.2.1.3]
Fujitsu Disk Array E153 - Mgt Raid Group Statusfujitsu_diskarray_e153_MgtRaidGroupStatusFujitsu Disk Array Mgt Raid Group StatusIt monitors the status of raid group. Possible values are unknown(1),ok(2),degraded(3),error(6),dormant(15).[FJDARY-E153 :: fjdaryMgtRaidGrpStatus : 1.3.6.1.4.1.211.1.21.1.153.14.3.2.1.2]
Fujitsu Disk Array E153 - Overall System Statusfujitsu_diskarray_e153_OverallSystemStatusFujitsu Disk Array Overall System StatusIt monitors the overall status of this system. Status becomes warning or failed when there are broken parts in the system. But,it doesn't become warning or failed when maintaining it. Possible values are unknown(1),unused(2),ok(3),warning(4),failed(5).[FJDARY-E153 :: fjdaryUnitStatus : 1.3.6.1.4.1.211.1.21.1.153.6]
Fujitsu Disk Array E153 - PSU Statusfujitsu_diskarray_e153_PSUStatusFujitsu Disk Array PSU StatusIt monitors the state of this PSU. But,it doesn't become warning or alarm when maintaining it. Possible values are normal(1),alarm(2),warning(3),invalid(4),maintenance(5),undefined(6).[FJDARY-E153 :: fjdaryPsuStatus : 1.3.6.1.4.1.211.1.21.1.153.2.16.2.1.3]
Fujitsu Disk Array E153- LAN Portfujitsu_diskarray_e153_lanport_MNTPortStateFujitsu Disk Array LAN Port MNT Port StateIt monitors the MNT port state. Possible values are linkup(1),undefined(4),linkdown(6),unknown(7).[FJDARY-E153 :: fjdaryLanportStatus0 : 1.3.6.1.4.1.211.1.21.1.153.2.20.2.1.2]
fujitsu_diskarray_e153_lanport_RMTPortStateFujitsu Disk Array LAN Port RMT Port StateIt monitors the RMT port state. Possible values are linkup(1),undefined(4),linkdown(6),unknown(7).[FJDARY-E153 :: fjdaryLanportStatus1 : 1.3.6.1.4.1.211.1.21.1.153.2.20.2.1.3]
fujitsu_diskarray_e153_lanport_FSTPortStateFujitsu Disk Array LAN Port FST Port StateIt monitors the FST port state. Possible values are linkup(1),undefined(4),linkdown(6),unknown(7).[FJDARY-E153 :: fjdaryLanportStatus2 : 1.3.6.1.4.1.211.1.21.1.153.2.20.2.1.4]

G2 - Agentless VyOS 1.3.0 VPN Tunnels Monitor

Description

Monitors the state of VPN tunnels on VyOS,indicating whether the tunnels are up,down,etc.

Prerequisites:

  • File path /opt/vyatta/etc/functions/script-template must be available in the system.
  • SSH Credentials need to be assigned on end device.

Template Tags: Agentless

Template Description:
Monitors the status of VPN tunnels on VyOS,providing insights into whether the tunnels are operational or experiencing issues.

Template Usage Guidelines:

  • While applying this template on the device,users need to provide specific input parameters in any one of the below two formats (Either UpTunnels or AllTunnels). The default value is set to “AllTunnels.”

    • Format 1: AllTunnels

      If “AllTunnels” is specified as custom script arguments,the script monitors all configured tunnels.

    • Format 2: UpTunnels

      If “UpTunnels” is provided as custom script arguments,the script monitors only operational(up) tunnels.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - Agentless VyOS 1.3.0 VPN Tunnels Monitorvyos_vpn_tunnel_statesVyOS VPN Tunnel States-Monitors the state of VPN tunnels on VyOS,indicating whether the tunnels are up,down,etc.

G2 - Agentless IBM AIX Basic Performance Monitoring - RSE

Description

Monitors the basic performance metrics of IBM AIX servers like uptime,cpu,memory,disk utilizations.

Prerequisites

SSH Credentials need to be assigned on end device.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - Agentless IBM AIX Basic Performance Monitoribm_aix_disk_utilizationIBM AIX Disk UtilizationPercentageMonitors the disks utilization of IBM AIX servers.
ibm_aix_cpu_utilizationIBM AIX CPU UtilizationPercentageMonitors the CPU utilization of IBM AIX servers.
ibm_aix_swap_memory_utilizationIBM AIX Swap Memory UtilizationPercentageMonitors the Swap Memory utilization of IBM AIX servers.
ibm_aix_real_memory_utilizationIBM AIX Real Memory UtilizationPercentageMonitors the Real Memory utilization of IBM AIX servers.
ibm_aix_real_memory_usedIBM AIX Real Memory UsedMegaBytesMonitors the amount of used real memory on IBM AIX servers,in megabytes (MB).
ibm_aix_real_memory_totalIBM AIX Real Memory TotalMegaBytesMonitors the amount of total real memory on IBM AIX servers,in megabytes (MB).
ibm_aix_real_memory_freeIBM AIX Real Memory FreeMegaBytesMonitors the amount of free real memory on IBM AIX servers,in megabytes (MB).
ibm_aix_uptimeIBM AIX UptimeMinutesMonitors the uptime of IBM AIX server

G2 - EMC Clariion LUN Template

Description

G2 - EMC Clariion LUN Template. This Template is applicable for storage array lun.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC Clariion LUN Monitoremc.clariion.lun.totalthroughputEMC CLARiiON LUN Total ThroughputpsecAverage number of requests that is passed through the LUN per second.,Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.readthroughputEMC CLARiiON LUN Read ThroughputpsecAverage number of read requests that is passed through the LUN per second.,Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.writethroughputEMC CLARiiON LUN Write ThroughputpsecAverage number of write requests that is passed through the LUN per second.,Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.statusEMC CLARiiON LUN StatusDisplays the status of the lun.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.writebandwidthEMC CLARiiON LUN Write BandwidthMBpsThe total write bandwidth for the LUN.,Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.readbandwidthEMC CLARiiON LUN Read BandwidthMBpsThe total read bandwidth for the LUN.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.totalbandwidthEMC CLARiiON LUN Total BandwidthMBpsThe total bandwidth for the LUN.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.trespasses-spaEMC CLARiiON LUN Trespasses SPAThe number of trespasses by SP A for the LUN.
emc.clariion.lun.trespasses-spbEMC CLARiiON LUN Trespasses SPBThe number of trespasses by SP B for the LUN.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.trespassesEMC CLARiiON LUN TrespassesThe total number of trespasses for the LUN.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.trespasses-pasthourEMC CLARiiON LUN Trespasses Past HourThe number of trespasses for the LUN in the past hour.,Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.trespasses-stateEMC CLARiiON LUN Trespasses StateState of the LUN Trespass.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.totalsofterrorsEMC CLARiiON LUN Total Soft ErrorsThe Soft errors on the LUN.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.totalharderrorsEMC CLARiiON LUN Total Hard ErrorsThe Hard errors on the LUN.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.servicetimeEMC CLARiiON LUN Service TimemsThe total time spent to serve the request.,Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.percentidleEMC CLARiiON LUN Percent Idle%The percent of time that the LUN is idle.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.percentbusyEMC CLARiiON LUN Percent Busy%The percent of time that the LUN is busy.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.clariion.lun.capacityEMC CLARiiON LUN CapacityGBThe capacity of the LUN in Gigabytes.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all

G2 - EMC Clariion Storage Array Cache Template

Description

G2 - EMC Clariion Storage Array Cache Template. This Template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC Clariion Storage Array Cache Monitoremc.clariion.cache.percentdirtypagesEMC CLARiiON Cache Percent Dirty Pages%Percentage of dirty pages currently in cache.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcache

G2 - EMC Clariion Storage Array Disk Template

Description

G2 - EMC Clariion Storage Array Disk Template. This Template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC Clariion Storage Array Disk Monitoremc.clariion.disk.percentbusyEMC CLARiiON Disk Utilization%Indicates percent utilization of the Disk.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk,Formula : Percent busy = (Busy Ticks / (Busy Ticks + Idle Ticks)) * 100
emc.clariion.disk.readthroughputEMC CLARiiON Disk Read ThroughputpsecIndicates the number of read requests made per second to this disk.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.clariion.disk.writethroughputEMC CLARiiON Disk Write ThroughputpsecIndicates the number of write requests made per second to this disk.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.clariion.disk.readbandwidthEMC CLARiiON Disk Read BandwidthMBpsMega Bytes of data read per second from the disks on the vnx array.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.clariion.disk.writebandwidthEMC CLARiiON Disk Write BandwidthMBpsMega Bytes of data written per second on the disks on the vnx array.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.clariion.disk.readerrorsEMC CLARiiON Disk Read ErrorsIndicates the number of hard read errors in this disk.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.clariion.disk.writeerrorsEMC CLARiiON Disk Write ErrorsIndicates the number of hard write errors in this disk.,Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.clariion.disk.stateEMC CLARiiON Disk StateIndicates the state of the disk,Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <<password> -Scope 0 getdisk

G2 - EMC Clariion Storage Array Fast Cache Template

Description

G2 - EMC Clariion Storage Array Fast Cache Template. This Template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC Clariion Storage Array Fast Cache Monitoremc.clariion.fastcache.stateEMC CLARiiON Fast Cache StateState of the Fast Cache.,Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 cache -fast -info -status -perfData
emc.clariion.fastcache.percentdirtyspaEMC CLARiiON Fast Cache Percentage Dirty SPA%The Fast Cache Percentage Dirty for Storage Processor A.,Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 cache -fast -info -status -perfData
emc.clariion.fastcache.percentdirtyspbEMC CLARiiON Fast Cache Percentage Dirty SPB%The Fast Cache Percentage Dirty for Storage Processor B,Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 cache -fast -info -status -perfData
emc.clariion.fastcache.sizeEMC CLARiiON Fast Cache SizeGBThe size of the fast cache.,Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 cache -fast -info -status -perfData

G2 - EMC Clariion Storage Array HBA Template

Description

G2 - EMC Clariion Storage Array Host Bus Adapter Template. This Template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC Clariion Storage Array HBA Monitoremc.clariion.hba.stateEMC CLARiiON Host Bus Adapter StateIndicates State of the Host bus adapter.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password -Scope 0 port -list

G2 - EMC Clariion Storage Array System Template

Description

G2 - EMC Clariion Storage Array System Template. This Template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC Clariion Storage Array System Monitoremc.clariion.system.totalrawspaceEMC CLARiiON System Total Raw SpaceGBThe total raw storage capacity of the system.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk.,this metric is calculated from number of Enabled,Unbound,Hot spare ready disks total space
emc.clariion.system.configuredstoragecapacityEMC CLARiiON System Configured Storage CapacityGBThe total configured disk capacity of the system.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk. This metric is calculated from number of Enabled disks total space
emc.clariion.system.luncountEMC CLARiiON System Lun CountThe total number of LUNs. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getlun -name
emc.clariion.system.diskcountEMC CLARiiON System Disk CountThe total number of disks.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.clariion.system.configureddiskcountEMC CLARiiON System Configured Disk CountThe number of configured disks.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk. This metric is calculated from number of Enabled disks
emc.clariion.system.unconfigureddiskcountEMC CLARiiON System UnConfigured Disk CountThe number of unconfigured disks.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk. This metric is calculated from number of unbound disks
emc.clariion.system.hotsparediskcountEMC CLARiiON System Hot Spared Disk CountThe total number of hot spare disks which are ready.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk. This metric is calculated from number of hot spared disks.

G2 - EMC Clariion Storage Pool Template

Description

G2 - EMC Clariion Storage Pool Template. This Template is applicable for block and raid pool.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC Clariion Storage Pool Monitoremc.clariion.storagepool.availablesizeEMC CLARiiON Storage Pool Available SizeGBStorage Pool available capacity.,CLARiiON have two type of storage pools. Block pool and Raid pool. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.clariion.storagepool.utilizationEMC CLARiiON Storage Pool Utilization%Pool Utilization.,CLARiiON have two type of storage pools. Block pool and Raid pool. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.clariion.storagepool.statusEMC CLARiiON Storage Pool StatusDisplays the information for the current state of the pool. CLARiiON have two type of storage pools. Block pool and Raid pool. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.clariion.storagepool.rawcapacityEMC CLARiiON Storage Pool Raw CapacityGBThe raw capacity of the Pool. CLARiiON have two type of storage pools. Block pool and Raid pool. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.clariion.storagepool.percentfreeEMC CLARiiON Storage Pool Percent Free%The percent of the Pool that is free.,CLARiiON have two type of storage pools. Block pool and Raid pool. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.clariion.storagepool.numberoflunsEMC CLARiiON Storage Pool Number of LUNsThe number of LUNs using the pool.,CLARiiON have two type of storage pools. Block pool and Raid pool. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h lt;ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.clariion.storagepool.logicalcapacityEMC CLARiiON Storage Pool Logical CapacityGBThe logical capacity of the pool.,CLARiiON have two type of storage pools. Block pool and Raid pool. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg

G2 - EMC Clariion Storage Processor Template

Description

G2 - EMC Clariion Storage Processor Template. This Template is applicable for block and raid processor.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC Clariion Storage Processor Monitoremc.clariion.storageprocessor.prctbusyEMC CLARiiON Storage Processor Percent Busy%Indicates percent utilization of the storage processor.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.clariion.storageprocessor.prctidleEMC CLARiiON Storage Processor Percent Idle%Indicates the percentage of time for the storage processor was idle.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.clariion.storageprocessor.totalthroughputEMC CLARiiON Storage Processor Total ThroughputpsecAverage number of requests that is passed through the storage processor per second.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.clariion.storageprocessor.readthroughputEMC CLARiiON Storage Processor Read ThroughputpsecAverage number of read requests that is passed through the storage processor per second.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.clariion.storageprocessor.writethroughputEMC Clariion Storage Processor Write ThroughputpsecAverage number of write requests that is passed through the storage processor per second.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.clariion.storageprocessor.statusEMC CLARiiON Storage Processor StatusStatus of the Storage Processor,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -spa/-spb
emc.clariion.storageprocessor.readcachestateEMC CLARiiON Storage Processor Read Cache StateStorage Processor Read Cache state.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.clariion.storageprocessor.writecachestateEMC CLARiiON Storage Processor Write Cache StateStorage Processor Write Cache state.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.clariion.storageprocessor.cablestatusEMC CLARiiON Storage Processor Cable StatusStorage Processor Cabling status.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -cablingspsa/-cablingspsb
emc.clariion.storageprocessor.cpustatusEMC CLARiiON Storage Processor CPU StatusStorage Processor CPU status.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -cpua/-cpub
emc.clariion.storageprocessor.fanstatusEMC CLARiiON Storage Processor Fan StatusStorage Processor Fan status.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -fana/-fanb
emc.clariion.storageprocessor.lccstatusEMC CLARiiON Storage Processor LCC StatusStorage Processor link control card status.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -lcca/-lccb
emc.clariion.storageprocessor.spsstatusEMC CLARiiON Storage Processor SPS StatusStorage Processor standby power supply status.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -spsa/-spsb
emc.clariion.storageprocessor.powerstatusEMC CLARiiON Storage Processor Power StatusStorage Processor power status.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -all
emc.clariion.storageprocessor.fault-led-statusEMC CLARiiON Storage Processor Fault LED StatusStatus of fault LED.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.clariion.storageprocessor.statistics-logging-statusEMC CLARiiON Storage Processor Statistics Logging StatusStatus of Statistics Logging. This Serve for performance monitoring.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.clariion.storageprocessor.responsetimeEMC CLARiiON Storage Processor Response TimemsAmount of time it takes for a storage processor to process an input-output request.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp,Formula : Response time : 1000 * (Queue length/throughput)
emc.clariion.storageprocessor.totalwritesEMC CLARiiON Storage Processor Total WritesNumber of write operations performed by the storage processor.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.clariion.storageprocessor.totalreadsEMC CLARiiON Storage Processor Total ReadsNumber of read operations to the storage processor.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.clariion.storageprocessor.servicetimeEMC CLARiiON Storage Processor Service TimemsThe total time spent to serve the request. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp,Formula : Service time = 1000 * (Utilization/throughput)
emc.clariion.storageprocessor.blocksreadEMC CLARiiON Storage Processor Blocks Read Per SecondNumber of blocks transferred for read operations.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.clariion.storageprocessor.blockswrittenEMC CLARiiON Storage Processor Blocks Written Per SecondNumber of blocks transferred for write operations.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.clariion.storageprocessor.averagebusy-queuelengthEMC CLARiiON Storage Processor Average Busy QueuelengthThe average number of outstanding requests.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp,Formula : Average Busy Queue Length : (Sum Queue Lengths - (Number arrivals With Non Zero Queue / 2)) / (Read Throughput [IO/s] + Write Throughput [IO/s])

G2 EMC VMAX Adapter Template

Description

This template is applicable to the storage array processor (adapter).

Prerequisites

The device should be added using integrations. The corresponding resource should exist. The gateway should be up and running. Storage Array should be reachable from Gateway. Storage Array (Device) and its resources should be in a managed state.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 EMC VMAX Adapter Monitorvmax.array.adapter.kbytestransferredAdapter KBytes TransferredKBpsAdapter KBytes Transferred
vmax.array.adapter.readiosAdapter ReadIOssAdapter ReadIOs
vmax.array.adapter.totaliosAdapter TotalIOssAdapter TotalIOs
vmax.array.adapter.writeiosAdapter WriteIOssAdapter WriteIOs

G2 EMC VMAX Array Template

Description

G2 EMC VMAX Array Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 EMC VMAX Array Monitorvmax.array.kbytesreadArray KBytes ReadKBpsArray KBytes Read
vmax.array.kbytestransferredArray KBytes TransferredKBpsArray KBytes Transferred
vmax.array.kbyteswrittenArray KBytes WrittenKBpsArray KBytes Written
vmax.array.readhitiosArray ReadHitIOssArray ReadHitIOs
vmax.array.readiosArray ReadIOssArray ReadIOs
vmax.array.totaliosArray TotalIOssArray TotalIOs
vmax.array.writehitiosArray WriteHitIOssArray WriteHitIOs
vmax.array.writeiosArray WriteIOssArray WriteIOs

G2 EMC VMAX BE FC Port Template

Description

This template is applicable to the storage array (device).

Prerequisites

The device should be added using integrations. The corresponding resource should exist. The gateway should be up and running. Storage Array should be reachable from Gateway. Storage Array (Device) and its resources should be in a managed state.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 EMC VMAX BE FC Port Monitorvmax.array.backendfcport.kbytestransferredBack End FCPort KBytes TransferredKBpsBack End FCPort KBytes Transferred
vmax.array.backendfcport.totaliosBack End FCPort TotalIOssBack End FCPort TotalIOs

G2 EMC VMAX Disk Template

Description

G2 EMC VMAX Disk Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 EMC VMAX Disk Monitorvmax.array.disk.kbytesreadDisk KBytes ReadKBpsDisk KBytes Read
vmax.array.disk.kbytestransferredDisk KBytes TransferredKBpsDisk KBytes Transferred
vmax.array.disk.kbyteswrittenDisk KBytes WrittenKBpsDisk KBytes Written
vmax.array.disk.statusDisk StatusNULLDisk Status
vmax.array.disk.utilizationDisk Utilization%Disk Utilization
vmax.array.disk.readiosDisk ReadIOssDisk ReadIOs
vmax.array.disk.totaliosDisk TotalIOssDisk TotalIOs
vmax.array.disk.writeiosDisk WriteIOssDisk WriteIOs

G2 EMC VMAX FE FC Port Template

Description

This template is applicable to the storage array (device).

Prerequisites

The device should be added using integrations. The corresponding resource should exist. The gateway should be up and running. Storage Array should be reachable from Gateway. Storage Array (Device) and its resources should be in a managed state.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 EMC VMAX FE FC Port Monitorvmax.array.frontendfcport.kbytestransferredFront End FCPort KBytes TransferredKBpsFront End FCPort KBytes Transferred
vmax.array.frontendfcport.totaliosFront End FCPort TotalIOssFront End FCPort TotalIOs

G2 EMC VMAX Storage Pool Template

Description

G2 EMC VMAX Storage Pool Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 EMC VMAX Storage Pool Monitorvmax.array.storagepool.statusStorage Pool StatusNULLStatus of the Storage Pool
vmax.array.storagepool.utilizationStorage Pool Utilization%Utilization for Storage Pool

G2 EMC VMAX Volume Template

Description

G2 EMC VMAX Volume Monitor

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 EMC VMAX Volume Monitorvmax.array.volume.kbytesreadVolume Kbytes ReadKBpsThe cumulative number of kilobytes read.
vmax.array.volume.kbytestransferredVolume Kbytes TransferredKBpsThe cumulative number of kilobytes transferred for read or write.
vmax.array.volume.kbyteswrittenVolume Kbytes WrittenKBpsThe cumulative number of kilobytes write.
vmax.array.volume.readhitiosVolume ReadHitIOssThe cumulative count of all read cache hits (reads from cache),which represents the number of track reads received from components above that have been treated by cache as a total hit on prestage or non-prestage data.
vmax.array.volume.writehitiosVolume WriteHitIOssThe cumulative count of write cache hits (writes that went directly to cache without blocking),which represents the number of track writes received from components above,and processed in fast write mode
vmax.array.volume.operationalstatusVolume Operational StatusNULLOperational Status of the Volume
vmax.array.volume.healthstateVolume Health StateNULLHealth State of the Volume
vmax.array.volume.utilizationVolume Utilization Percentage%Percentage Utilization of the Volume
vmax.array.volume.readiosVolume ReadIOssThe cumulative number of Read I/O operations for the Volume.
vmax.array.volume.writeiosVolume WriteIOssThe cumulative number of Write I/O operations for the Volume.
vmax.array.volume.totaliosVolume TotalIOssThe cumulative number of I/O operations for the Volume (read and write).

G2 - EMC VNX LUN Template

Description

G2 - EMC VNX LUN Template. This template is applicable for storage array lun.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX LUN Monitoremc.vnx.lun.totalthroughputEMC VNX LUN Total ThroughputpsecAverage number of requests that is passed through the LUN per second.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.readthroughputEMC VNX LUN Read ThroughputpsecAverage number of read requests that is passed through the LUN per second.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.writethroughputEMC VNX LUN Write ThroughputpsecAverage number of write requests that is passed through the LUN per second.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.statusEMC VNX LUN StatusDisplays the status of the lun.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.writebandwidthEMC VNX LUN Write BandwidthMBpsThe total write bandwidth for the LUN..,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.readbandwidthEMC VNX LUN Read BandwidthMBpsThe total read bandwidth for the LUN.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.totalbandwidthEMC VNX LUN Total BandwidthMBpsThe total bandwidth for the LUN.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.trespasses-spaEMC VNX LUN SPA Tres PassesThe number of trespasses by SP A for the LUN.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.trespasses-spbEMC VNX LUN SPB Tres PassesThe number of trespasses by SP B for the LUN.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.trespassesEMC VNX LUN Tres PassesThe total number of trespasses for the LUN.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.trespasses-pasthourEMC VNX LUN Tres Passes Past HourThe number of trespasses for the LUN in the past hour.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.trespasses-stateEMC VNX LUN Tres Passes StateState of the LUN Trespass.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.totalsofterrorsEMC VNX LUN Total Soft ErrorsThe Soft errors on the LUN.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.totalharderrorsEMC VNX LUN Total Hard ErrorsThe Hard errors on the LUN.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.servicetimeEMC VNX LUN Service TimemsThe total time spent to serve the request.
emc.vnx.lun.percentidleEMC VNX LUN Percent Idle%The percent of time that the LUN is idle. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.percentbusyEMC VNX LUN Percent Busy%The percent of time that the LUN is busy.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all
emc.vnx.lun.capacityEMC VNX LUN CapacityGBThe capacity of the LUN in Gigabytes.,

G2 - EMC VNX NAS Storage Array Data Mover Template

Description

G2 - EMC VNX NAS Storage Array Data Mover Template. This template is applicable for storage array

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX NAS Storage Array Data Mover Monitoremc.vnx.mover.cpuutilizationEMC VNX Data Mover CPU Utilization%Data Mover CPU Utilization,OpsRamp used XML API to get this metric
emc.vnx.mover.memoryutilizationEMC VNX Data Mover Memoty Utilization%Data Mover Memory Utilization OpsRamp used XML API to get this metric
emc.vnx.mover.statusEMC VNX Data Mover StatusStatus of the Data mover,OpsRamp used XML API to get this metric

G2 - EMC VNX NAS Storage Array Events Template

Description

G2 - EMC VNX NAS Storage Array Events Template. This template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX NAS Storage Array Events Monitoremc.vnx.event.0x13608900caA Celerra Database error was detectedNULLAn inconsistency in the Celerra database files was detected. Run the $NAS_DB/tools/dbchk tool to identify the exact error
emc.vnx.event.0x1460870065The Jserver failed to start after three tries.NULLThe Jserver failed to start after three tries.
emc.vnx.event.0x1660890131nasdb backup NAS DB checkpoint done.NULLnasdb backup NAS DB checkpoint done.
emc.vnx.event.0x1660890132nasdb backup Celerra database backup done.NULLnasdb backup Celerra database backup done.

G2 - EMC VNX NAS Storage Array File System Template

Description

G2 - EMC VNX NAS Storage Array File System Template. This template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX NAS Storage Array File System Monitoremc.vnx.filesystem.availablesizeEMC VNX File System Available SizeGBFile system available size,OpsRamp used XML API to get this metric.
emc.vnx.filesystem.utilizationEMC VNX File System Utilization%File system utilization,OpsRamp used XML API to get this metric
emc.vnx.filesystem.availablefilesEMC VNX File System Available FilesFile system available files,OpsRamp used XML API to get this metric

G2 - EMC VNX NAS Storage Array System Template

Description

G2 - EMC VNX NAS Storage Array System Template. This template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX NAS Storage Array System Monitoremc.vnx.systempower.statusEMC VNX System Power StatusPower status of the System,OpsRamp used XML API to get this metric
emc.vnx.storagesystem.statusEMC VNX Storage System StatusStatus of the Storage System,OpsRamp used XML API to get this metric
emc.vnx.storagesystempower.statusEMC VNX Storage System Power StatusPower status of the Storage System,OpsRamp used XML API to get this metric

G2 - EMC VNX NAS Storage Array Virtual Data Mover Template

Description

G2 - EMC VNX NAS Storage Array Virtual Data Mover Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX NAS Storage Array Virtual Data Mover Monitoremc.vnx.vdm.statusEMC VNX Virtual Data Mover StatusStatus of the Virtual Data mover. OpsRamp used XML API to get this metric.
emc.vnx.vdm.stateEMC VNX Virtual Data Mover StateState of the Virtual Data mover OpsRamp used XML API to get this metric

G2 - EMC VNX NAS Storage Pool Template

Description

G2 - EMC VNX NAS Storage Pool Template. This template is applicable for File Storage Pool.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX NAS Storage Pool Monitoremc.vnx.storagepool.availablesizeEMC VNX Storage Pool Available SizeGBStorage Pool available capacity.,VNX have 3 type of storage pools. File pool,Block pool and Raid pool. If it is file pool OpsRamp used XML api to calculate this metric. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.vnx.storagepool.utilizationEMC VNX Storage Pool Utilization%Pool utilization.,VNX have 3 type of storage pools. File pool,Block pool and Raid pool. If it is file pool OpsRamp used XML api to calculate this metric. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.vnx.storagepool.statusEMC VNX Storage Pool StatusDisplays the information for the current state of the pool.,VNX have 3 type of storage pools. File pool,Block pool and Raid pool. If it is file pool OpsRamp used XML api to calculate this metric. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.vnx.storagepool.percentfreeEMC VNX Storage Pool Percentage Free%The percent of the Pool that is free.,VNX have 3 type of storage pools. File pool,Block pool and Raid pool. If it is file pool OpsRamp used XML api to calculate this metric. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg

G2 - EMC VNX Primary Control Station Template

Description

G2 - EMC VNX Primary Control Station Template. This template is applicable for primary control station.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX Primary Control Station Monitoremc.vnx.primarycs.statusEMC VNX Primary Control Station StatusStatus of the Primary Control station.,OpsRamp used XML API to get this metric.

G2 - EMC VNX SAN Storage Array Disk Template

Description

G2 - EMC VNX SAN Storage Array Disk Template. This template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX SAN Storage Array Disk Monitoremc.vnx.disk.percentbusyEMC VNX Disk Utilization%Indicates percent utilization of the Disk,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk,Formula : Percent busy = (Busy Ticks / (Busy Ticks + Idle Ticks)) * 100
emc.vnx.disk.readthroughputEMC VNX Disk Read ThroughputpsecIndicates the number of read requests made per second to this disk.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.vnx.disk.writethroughputEMC VNX Disk Write ThroughputpsecIndicates the number of write requests made per second to this disk.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.vnx.disk.readbandwidthEMC VNX Disk Read BandwidthMBpsMega Bytes of data read per second from the disks on the vnx array.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.vnx.disk.writebandwidthEMC VNX Disk Write BandwidthMBpsMega Bytes of data written per second on the disks on the vnx array.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.vnx.disk.readerrorsEMC VNX Disk Read ErrorsIndicates the number of hard read errors in this disk.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.vnx.disk.writeerrorsEMC VNX Disk Write ErrorsIndicates the number of hard write errors in this disk.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.vnx.disk.stateEMC VNX Disk StateIndicates the state of the disk,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.vnx.system.hotsparediskcountEMC VNX System Hot Spared Disk CountThe total number of hot spare disks which are ready.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk This metric is calculated from number of hot spared disks

G2 - EMC VNX SAN Storage Array Fast Cache Template

Description

G2 - EMC VNX SAN Storage Array Fast Cache Template. This template is applicable for storage array

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX SAN Storage Array Fast Cache Monitoremc.vnx.fastcache.stateEMC VNX Fast Cache StateState of the Fast Cache Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 cache -fast -info -status -perfData
emc.vnx.fastcache.percentdirtyspaEMC VNX Fast Cache Percentage Dirty SPA%The Fast Cache Percentage Dirty for Storage Processor A,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 cache -fast -info -status -perfData
emc.vnx.fastcache.percentdirtyspbEMC VNX Fast Cache Percentage Dirty SPB%The Fast Cache Percentage Dirty for Storage Processor B.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 cache -fast -info -status -perfData
emc.vnx.fastcache.sizeEMC VNX Fast Cache SizeGBThe size of the fast cache.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 cache -fast -info -status -perfData

G2 - EMC VNX SAN Storage Array Faults Template

Description

G2 - EMC VNX SAN Storage Array Faults Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX SAN Storage Array Faults Monitoremc.vnx.system.faultscountEMC VNX System Faults CountThe number of faults in the system.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 faults -list
emc.vnx.system.faultsEMC VNX System FaultsNULLEMC VNX System Faults

G2 - EMC VNX SAN Storage Array HBA Template

Description

G2 - EMC VNX SAN Storage Array HBA Template. This template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX SAN Storage Array HBA Monitoremc.vnx.hba.stateEMC VNX Host Bus Adapter StateIndicates State of the Host bus adapter.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 port -list

G2 - EMC VNX SAN Storage Array System Template

Description

G2 - EMC VNX SAN Storage Array System Template. This template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX SAN Storage Array System Monitoremc.vnx.system.totalrawspaceEMC VNX System Total Raw SpaceGBThe total raw storage capacity of the system.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk This metric is calculated from number of Enabled,Unbound,Hot spare ready disks total space
emc.vnx.system.configuredstoragecapacityEMC VNX System Configured Storage CapacityGBThe total configured disk capacity of the system.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk This metric is calculated from number of Enabled disks total space
emc.vnx.system.luncountEMC VNX System Lun CountThe total number of LUNs. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getlun -name
emc.vnx.system.diskcountEMC VNX System Disk CountThe total number of disks.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk
emc.vnx.system.configureddiskcountEMC VNX System Configured Disk CountThe number of configured disks.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk. This metric is calculated from number of Enabled disks
emc.vnx.system.unconfigureddiskcountEMC VNX System UnConfigured Disk CountThe number of unconfigured disks.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk. This metric is calculated from number of unbound disks
emc.vnx.system.hotsparediskcountEMC VNX System Hot Spared Disk CountThe total number of hot spare disks which are ready.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getdisk. This metric is calculated from number of hot spared disks

G2 - EMC VNX SAN Storage Pool Template

Description

G2 - EMC VNX SAN Storage Pool Template. This template is applicable for block and raid pool.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX SAN Storage Pool Monitoremc.vnx.storagepool.availablesizeEMC VNX Storage Pool Available SizeGBStorage Pool available capacity.,VNX have 3 type of storage pools. File pool,Block pool and Raid pool. If it is file pool OpsRamp used XML api to calculate this metric. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.vnx.storagepool.utilizationEMC VNX Storage Pool Utilization%Pool utilization.,VNX have 3 type of storage pools. File pool,Block pool and Raid pool. If it is file pool OpsRamp used XML api to calculate this metric. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.vnx.storagepool.statusEMC VNX Storage Pool StatusDisplays the information for the current state of the pool.,VNX have 3 type of storage pools. File pool,Block pool and Raid pool. If it is file pool OpsRamp used XML api to calculate this metric. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.vnx.storagepool.rawcapacityEMC VNX Storage Pool Raw CapacityGBThe raw capacity of the Pool. VNX have 3 type of storage pools. File pool,Block pool and Raid pool. For file pools unable to get raw capacity. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.vnx.storagepool.percentfreeEMC VNX Storage Pool Percentage Free%The percent of the Pool that is free.,VNX have 3 type of storage pools. File pool,Block pool and Raid pool. If it is file pool OpsRamp used XML api to calculate this metric. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.vnx.storagepool.numberoflunsEMC VNX Storage Pool Number of LunsThe number of LUNs using the pool.,VNX have 3 type of storage pools. File pool,Block pool and Raid pool. File pool didn't have luns. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg
emc.vnx.storagepool.logicalcapacityEMC VNX Storage Pool Logical CapacityGBThe logical capacity of the pool. VNX have 3 type of storage pools. File pool,Block pool and Raid pool. If it is file pool unable to get logical capacity of the storage pool. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list.,If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg

G2 - EMC VNX Secondary Control Station Template

Description

G2 - EMC VNX Secondary Control Station Template. This template is applicable for secondary control station.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX Secondary Control Station Monitoremc.vnx.secondarycs.statusEMC VNX Secondary Control Station StatusStatus of the Secondary Control station.,OpsRamp used XML API to get this metric.

G2 - EMC VNX Storage Processor Template

Description

G2 - EMC VNX Storage Processor Template. This template is applicable for storage processor

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX Storage Processor Monitoremc.vnx.storageprocessor.prctbusyEMC VNX Storage Processor Percent Busy%Indicates percent utilization of the storage processor.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.vnx.storageprocessor.totalthroughputEMC VNX Storage Processor Total ThroughputpsecAverage number of requests that is passed through the storage processor per second.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.vnx.storageprocessor.readthroughputEMC VNX Storage Processor Read ThroughputpsecAverage number of read requests that is passed through the storage processor per second.,Command : Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.vnx.storageprocessor.writethroughputEMC VNX Storage Processor Write ThroughputpsecAverage number of write requests that is passed through the storage processor per second.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.vnx.storageprocessor.statusEMC VNX Storage Processor StatusStatus of the Storage Processor,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -spa
emc.vnx.storageprocessor.readcachestateEMC VNX Storage Processor Read Cache StateStorage Processor Read Cache state.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.vnx.storageprocessor.writecachestateEMC VNX Storage Processor Write Cache StateStorage Processor Write Cache state.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.vnx.storageprocessor.cablestatusEMC VNX Storage Processor Cable StatusStorage Processor Cabling status.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -cablingspsa/-cablingspsb
emc.vnx.storageprocessor.cpustatusEMC VNX Storage Processor CPU StatusStorage Processor CPU status.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -cpua/-cpub
emc.vnx.storageprocessor.fanstatusEMC VNX Storage Processor Fan StatusStorage Processor Fan status.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -fana/-fanb
emc.vnx.storageprocessor.lccstatusEMC VNX Storage Processor LCC StatusStorage Processor link control card status.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -lcca/-lccb
emc.vnx.storageprocessor.spsstatusEMC VNX Storage Processor SPS StatusStorage Processor standby power supply status.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -spsa/-spsb
emc.vnx.storageprocessor.powerstatusEMC VNX Storage Processor Power StatusStorage Processor power status.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -all
emc.vnx.storageprocessor.fault-led-statusEMC VNX Storage Processor Fault LED StatusStatus of fault LED.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.vnx.storageprocessor.statistics-logging-statusEMC VNX Storage Processor Statistics Logging StatusStatus of Statistics Logging. This Serve for performance monitoring.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.vnx.storageprocessor.responsetimeEMC VNX Storage Processor Response TimemsAmount of time it takes for a storage processor to process an input-output request.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp Formula : Response time : 1000 * (Queue length/throughput)
emc.vnx.storageprocessor.totalwritesEMC VNX Storage Processor Total WritesNumber of write operations performed by the storage processor.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.vnx.storageprocessor.totalreadsEMC VNX Storage Processor Total ReadsNumber of read operations to the storage processor.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.vnx.storageprocessor.blocksreadEMC VNX Storage Processor Blocks Read Per SecondNumber of blocks transferred for read operations.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.vnx.storageprocessor.blockswrittenEMC VNX Storage Processor Blocks Written Per SecondNumber of blocks transferred for write operations.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp
emc.vnx.storageprocessor.averagebusy-queuelengthEMC VNX Storage Processor Average Busy QueuelengthThe average number of outstanding requests.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp Formula : Average Busy Queue Length : (Sum Queue Lengths - (Number arrivals With Non Zero Queue / 2)) / (Read Throughput [IO/s] + Write Throughput [IO/s])
emc.vnx.storageprocessor.servicetimeEMC VNX Storage Processor Service TimemsThe total time spent to serve the request.Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp Formula : Service time = 1000 * (Utilization/throughput)
emc.vnx.storageprocessor.prctidleEMC VNX Storage Processor Percent Idle%Indicates the percentage of time for the storage processor was idle.,Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp

G2 - EMC VNX Volume Template

Description

G2 - EMC VNX Volume Template. This template is applicable for storage array volume.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNX Volume Monitoremc.vnx.volume.availablesizeEMC VNX Volume Available SizeGBVolume available capacity.,OpsRamp used XML API to get this metric.
emc.vnx.volume.utilizationEMC VNX Volume Utilization%Indicates volume utilization.,OpsRamp used XML API to get this metric.
emc.vnx.volume.statusEMC VNX Volume StatusDisplays the information for the current state of the volume.,OpsRamp used XML API to get this metric.

G2 - EMC VNXe Status Template

Description

This template monitors status of components and applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNXe Status Monitoremc.vnxe.battery.statusEMC VNXe Battery StatusNULLEMC VNXe Battery Status. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /env/bat show -output csv
emc.vnxe.cache.statusEMC VNXe Cache StatusNULLStatus of the Cache. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /env/ccard show -output csv
emc.vnxe.dae.statusEMC VNXe DAE StatusNULLStatus of the Disk Array Enclosure (DAE). Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /env/dae show -output csv
emc.vnxe.dpe.statusEMC VNXe DPE StatusNULLStatus of the Disk Processor Enclosure (DPE). Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /env/dpe show -output csv
emc.vnxe.ethernet.statusEMC VNXe Ethernet StatusNULLStatus of the Ethernet Port. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /net/port/eth show -output csv
emc.vnxe.fan.statusEMC VNXe Fan StatusNULLStatus of the Fan. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /env/fan show -output csv
emc.vnxe.fcport.statusEMC VNXe FC Port StatusNULLStatus of the FC Port. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /net/port/fc show -output csv
emc.vnxe.host.statusEMC VNXe Host StatusNULLStatus of the Host. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /remote/host show -output csv
emc.vnxe.io.statusEMC VNXe IO StatusNULLStatus of the IO Module. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /env/iomodule show -output csv
emc.vnxe.iscsinode.statusEMC VNXe iSCSI Node StatusNULLStatus of the iSCSI Node. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /net/iscsi/node show -output csv
emc.vnxe.lcc.statusEMC VNXe LCC StatusNULLStatus of the Manage link control card (LCC). Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /env/lcc show -output csv
emc.vnxe.license.statusEMC VNXe License StatusNULLStatus of the License. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /sys/lic show -output csv
emc.vnxe.mm.statusEMC VNXe Memory Module StatusNULLStatus of the Memory Module (MM). Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /env/mm show -output csv
emc.vnxe.powersupply.statusEMC VNXe Power Supply StatusNULLStatus of the Power Supply. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /env/ps show -output csv
emc.vnxe.ssd.statusEMC VNXe SSD StatusNULLStatus of the Solid State Drive (SSD). Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /env/ssd show -output csv
emc.vnxe.system.statusEMC VNXe System StatusNULLStatus of the System. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /sys/general show -output csv
emc.vnxe.vmfsdatastore.statusEMC VNXe VMFS Data Store StatusNULLStatus of the VMFS Data Store. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /stor/prov/vmware/vmfs show -output csv
emc.vnxe.snapshot.stateEMC VNXe Snapshot StatusNULLStatus of the Snapshot. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /prot/snap show -output csv
emc.vnxe.replicationsession.statusEMC VNXe Replication Session StatussStatus of the Replication Session. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /prot/rep/session show -output csv

G2 - EMC VNXe Storage Array CIFS Template

Description

This template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNXe Storage Array CIFS Monitoremc.vnxe.cifs.readavgsizeEMC VNXe CIFS Read Average SizeKBAverage CIFS read size. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.cifs.global.basic show -interval 10 -count 1 -expand -output csv
emc.vnxe.cifs.readbytesEMC VNXe CIFS Read BytesKBpsNumber of CIFS bytes read. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.cifs.global.basic show -interval 10 -count 1 -expand -output csv
emc.vnxe.cifs.readsEMC VNXe CIFS ReadspsecNumber of CIFS read operations. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.cifs.global.basic show -interval 10 -count 1 -expand -output csv
emc.vnxe.cifs.totalopsEMC VNXe CIFS Total OperationspsecTotal number of CIFS operations. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.cifs.global.basic show -interval 10 -count 1 -expand -output csv
emc.vnxe.cifs.writeavgsizeEMC VNXe CIFS Write Average SizeKBAverage CIFS write size. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.cifs.global.basic show -interval 10 -count 1 -expand -output csv
emc.vnxe.cifs.writebytesEMC VNXe CIFS Write BytesKBpsNumber of CIFS bytes write. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.cifs.global.basic show -interval 10 -count 1 -expand -output csv
emc.vnxe.cifs.writesEMC VNXe CIFS WritespsecNumber of CIFS write operations. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.cifs.global.basic show -interval 10 -count 1 -expand -output csv

G2 - EMC VNXe Storage Array CPU Template

Description

This template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNXe Storage Array CPU Monitoremc.vnxe.cpu.summaryutilizationEMC VNXe CPU Summary Utilization%CPU Summary Utilization. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.cpu show -interval 10 -count 1 -expand -output csv
emc.vnxe.cpu.uptimeEMC VNXe CPU UptimesTime since boot up in seconds. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.cpu show -interval 10 -count 1 -expand -output csv

G2 - EMC VNXe Storage Array Disk Template

Description

This template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNXe Storage Array Disk Monitoremc.vnxe.disk.averagequeuelengthEMC VNXe Disk Average Queue LengthNULLAverage Queue Length for the disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv
emc.vnxe.disk.readbytesEMC VNXe Disk Read BytesKBpsNumber of bytes read from this disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv
emc.vnxe.disk.readsEMC VNXe Disk ReadspsecReads from this disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv
emc.vnxe.disk.responsetimeEMC VNXe Disk Response timemicrosecAverage response time for this disk,measured in microseconds. This measures the average time it takes for a disk request to complete. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv
emc.vnxe.disk.servicetimeEMC VNXe Disk Service timemicrosecAverage service time for this disk,measured in microseconds. This measures the average time the disk spends on each individual request. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv
emc.vnxe.disk.statusEMC VNXe Disk StatusNULLStatus of the Disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /env/disk show -output csv
emc.vnxe.disk.totalcallsEMC VNXe Disk Total CallspsecTotal Reads and Writes for this disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv
emc.vnxe.disk.utilizationEMC VNXe Disk Utilization%Utilization % for this disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv
emc.vnxe.disk.writebytesEMC VNXe Disk Write BytesKBpsNumber of bytes written to this disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv
emc.vnxe.disk.writesEMC VNXe Disk WritespsecWrites to this disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv

G2 - EMC VNXe Storage Array Network Template

Description

This template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNXe Storage Array Network Monitoremc.vnxe.network.bytesinEMC VNXe Network Bytes inKBpsNumber of octets read from network device. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.net.device show -interval 10 -count 1 -expand -output csv
emc.vnxe.network.bytesoutEMC VNXe Network Bytes outKBpsNumber of octets written to network device. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.net.device show -interval 10 -count 1 -expand -output csv
emc.vnxe.network.pktsinEMC VNXe Network Packets inpsecNumber of packets read from network device. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.net.device show -interval 10 -count 1 -expand -output csv
emc.vnxe.network.pktsoutEMC VNXe Network Packets outpsecNumber of packets written to network device. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.net.device show -interval 10 -count 1 -expand -output csv

G2 - EMC VNXe Storage Array NFS Datastore Template

Description

This template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNXe Storage Array NFS Datastore Monitoremc.vnxe.nfsdatastore.availablesizeEMC VNXe NFS Data Store Available SizeGBNFS Data Store Available Size. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /stor/prov/vmware/nfs show -output csv
emc.vnxe.nfsdatastore.statusEMC VNXe NFS Data Store StatusNULLStatus of the NFS Data store. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /stor/prov/vmware/nfs show -output csv
emc.vnxe.nfsdatastore.utilizationEMC VNXe NFS Data Store Utilization%NFS Data Store Utilization. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /stor/prov/vmware/nfs show -output csv

G2 - EMC VNXe Storage Array NFS Template

Description

This template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNXe Storage Array NFS Monitoremc.vnxe.nfs.readavgsizeEMC VNXe NFS Read Average SizeKBAverage NFS read size. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.nfs.basic show -interval 10 -count 1 -expand -output csv
emc.vnxe.nfs.readbytesEMC VNXe NFS Read BytesKBpsNumber of NFS bytes read. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.nfs.basic show -interval 10 -count 1 -expand -output csv
emc.vnxe.nfs.readsEMC VNXe NFS ReadspsecNumber of NFS read operations. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.nfs.basic show -interval 10 -count 1 -expand -output csv
emc.vnxe.nfs.writeavgsizeEMC VNXe NFS Write Average SizeKBAverage NFS write size. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.nfs.basic show -interval 10 -count 1 -expand -output csv
emc.vnxe.nfs.writebytesEMC VNXe NFS Write BytesKBpsNumber of NFS bytes write. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.nfs.basic show -interval 10 -count 1 -expand -output csv
emc.vnxe.nfs.writesEMC VNXe NFS WritespsecNumber of NFS write operations. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.nfs.basic show -interval 10 -count 1 -expand -output csv

G2 - EMC VNXe Storage Pool Template

Description

This template is applicable for storage pool or aggregate.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNXe Storage Pool Monitoremc.vnxe.storagepool.availablesizeEMC VNXe Storage Pool Available SizeGBStorage pool available size. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /stor/config/pool show -output csv
emc.vnxe.storagepool.statusEMC VNXe Storage Pool StatusNULLEMC VNXe Storage Pool Status. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /stor/config/pool show -output csv
emc.vnxe.storagepool.utilizationEMC VNXe Storage Pool Utilization%Storage pool Utilization. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /stor/config/pool show -output csv

G2 - EMC VNXe Storage Processor Template

Description

This template is applicable for storage processor.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - EMC VNXe Storage Processor Monitoremc.vnxe.storageprocessor.readblocksEMC VNXe Storage Processor Read BlockspsecBlocks read from this SP. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
emc.vnxe.storageprocessor.readbytesEMC VNXe Storage Processor Read BytesKBpsNumber of bytes read from this SP. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
emc.vnxe.storageprocessor.readsEMC VNXe Storage Processor ReadspsecReads from this SP. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
emc.vnxe.storageprocessor.statusEMC VNXe Storage Processor StatusNULLStatus of the Storage Processor. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /env/sp show -output csv
emc.vnxe.storageprocessor.totalbytesEMC VNXe Storage Processor Total BytesKBpsTotal number of read and write bytes on this sp. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
emc.vnxe.storageprocessor.totalcallsEMC VNXe Storage Processor Total CallspsecTotal number of read and write requests on this SP. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
emc.vnxe.storageprocessor.writeblocksEMC VNXe Storage Processor Write BlockspsecBlocks write to this SP. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
emc.vnxe.storageprocessor.writebytesEMC VNXe Storage Processor Write BytesKBpsNumber of bytes write to this SP. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
emc.vnxe.storageprocessor.writesEMC VNXe Storage Processor WritespsecWrites to this SP. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv

G2 - IBM Storwize Storage Array Cluster Template

Description

Monitor the cluster status and capacity. This template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - IBM Storwize Storage Array Cluster Monitoribm.storwize.cluster.statusIBM Storwize Cluster StatusNULLStatus of the Cluster
ibm.storwize.cluster.allocatedcapacityIBM Storwize Cluster Allocated CapacityGBThe total capacity of all StorageVolumes in the cluster.
ibm.storwize.cluster.availablecapacityIBM Storwize Cluster Available CapacityGBThe currently available space in the cluster. This is approximate.
ibm.storwize.cluster.backendstoragecapacityIBM Storwize Cluster Backend Storage CapacityGBThe total capacity of all backend storage connected to the cluster.
ibm.storwize.cluster.utilizationIBM Storwize Cluster Utilization%Cluster Utilization

G2 - IBM Storwize Storage Array Disk Template

Description

Monitor the disk component status and performance. This template is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - IBM Storwize Storage Array Disk Monitoribm.storwize.disk.kbytesreadIBM Storwize Disk KBytes ReadKBTotal bytes read from the disk
ibm.storwize.disk.kbytestransferredIBM Storwize Disk KBytes TransferredKBTotal bytes trasfered from the disk
ibm.storwize.disk.kbyteswrittenIBM Storwize Disk KBytes WrittenKBTotal bytes written to the disk
ibm.storwize.disk.readiosIBM Storwize Disk Read IOspsecThe cumulative count of all reads.
ibm.storwize.disk.totaliosIBM Storwize Disk Total IOspsecThe cumulative count of all read and writes.
ibm.storwize.disk.writeiosIBM Storwize Disk Write IOspsecThe cumulative count of all writes.
ibm.storwize.disk.statusIBM Storwize Disk StatusNULLState of the disk.

Note: SMI-S Operational statuses codes and thresholds. The following configuration is for ibm.storwize.disk.status metric.

Status CodeStateThreshold
1ok
2degradedWarning
3errorCritical
4otherWarning
5stressed
6predictive failureCritical
7non-recoverable errorCritical
8starting
9stoppingCritical
10stoppedCritical
11in service
12no contactCritical
13lost communicationCritical
14abortedCritical
15dormantCritical
16supporting entity in errorCritical
17completed
18power mode
19dmtf reserved
20vendor reserved
21unknownWarning

THRESHOLDS configurations:

Example:

Use In string list operator,and use above comma separated values like below:

For Critical:
Operator: In String list
Values: error,predictive failure,non-recoverable error,stopping,stopped,no contact,lost communication,aborted,dormant,supporting entity in error.

For Warning:
Operator: In String list
Values: other,unknown

Use In string list operator,and comma separated values like below:

Threshold

G2 - IBM Storwize Storage Array Ethernet Template

Description

Monitor the ethernet port status and speed. This monitor is applicable for storage array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - IBM Storwize Storage Array Ethernet Monitoribm.storwize.ethernetport.speedIBM Storwize Ethernet Port SpeedbpsAn estimate of the current bandwidth in Bits per Second. For ports that vary in bandwidth or for those where no accurate estimation can be made,this property should contain the nominal bandwidth.
ibm.storwize.ethernetport.statusIBM Storwize Ethernet Port StatusNULLStatus of the Ethernet port

G2 - IBM Storwize Storage Lun Template

Description

Monitor the storage lun status and performance. This monitor is applicable for storage lun.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - IBM Storwize Storage Lun Monitoribm.storwize.lun.kbytesreadIBM Storwize Lun KBytes ReadKBTotal bytes read from the lun
ibm.storwize.lun.kbytestransferredIBM Storwize Lun KBytes TransferredKBTotal bytes trasfered from the lun
ibm.storwize.lun.kbyteswrittenIBM Storwize Lun KBytes WrittenKBTotal bytes written to the lun
ibm.storwize.lun.readiosIBM Storwize Lun Read IOspsecThe cumulative count of all reads.
ibm.storwize.lun.totaliosIBM Storwize Lun Total IOspsecThe cumulative count of all read and writes.
ibm.storwize.lun.writeiosIBM Storwize Lun Write IOspsecThe cumulative count of all writes.
ibm.storwize.lun.statusIBM Storwize Lun StatusNULLStatus of the disk

G2 - IBM Storwize Storage Node Template

Description

Monitor the storage cluster node status and performance. This monitor is applicable for storage cluster node.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - IBM Storwize Storage Node Monitoribm.storwize.node.readhitiosIBM Storwize Node Read Hit IOspsecThe cumulative count of all read cache hits (reads from cache),which represents the number of track reads received from components above that have been treated by cache as a total hit on prestage or non-prestage data.
ibm.storwize.node.readiosIBM Storwize Node Read IOspsecThe cumulative count of all reads.
ibm.storwize.node.totaliosIBM Storwize Node Total IOspsecThe cumulative count of all read and writes.
ibm.storwize.node.writehitiosIBM Storwize Node Write Hit IOspsecThe cumulative count of write cache hits (writes that went directly to cache without blocking),which represents the number of track writes received from components above and processed in fast write mode.
ibm.storwize.node.writeiosIBM Storwize Node Write IOspsecThe cumulative count of all writes.
ibm.storwize.node.statusIBM Storwize Node StatusNULLStatus of the node

G2 - IBM Storwize Storage Pool Template

Description

Monitor the storage pool status and capacity. This monitor is applicable for storage pool.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - IBM Storwize Storage Pool Monitoribm.storwize.storagepool.statusIBM Storwize Storage Pool StatusNULLState of the Storage pool
ibm.storwize.storagepool.availablesizeIBM Storwize Storage Pool Available SizeGBStorage pool available size
ibm.storwize.storagepool.utilizationIBM Storwize Storage Pool Utilization%Storage pool Utilization

G2 - IBM Storwize Storage Volume Template

Description

Monitor the storage volume status and performance. This monitor is applicable for storage volume.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - IBM Storwize Storage Volume Monitoribm.storwize.volume.kbytesreadIBM Storwize Volume KBytes ReadKBTotal bytes read from the volume
ibm.storwize.volume.kbytestransferredIBM Storwize Volume KBytes TransferredKBTotal bytes trasfered from the volume
ibm.storwize.volume.kbyteswrittenIBM Storwize Volume KBytes WrittenKBTotal bytes written to the volume
ibm.storwize.volume.readhitiosIBM Storwize Volume Read Hit IOspsecThe cumulative count of all read cache hits (reads from cache),which represents the number of track reads received from components above that have been treated by cache as a total hit on prestage or non-prestage data.
ibm.storwize.volume.readiosIBM Storwize Volume Read IOspsecThe cumulative count of all reads.
ibm.storwize.volume.totaliosIBM Storwize Volume Total IOspsecThe cumulative count of all read and writes.
ibm.storwize.volume.writehitiosIBM Storwize Volume Write Hit IOspsecThe cumulative count of write cache hits (writes that went directly to cache without blocking),which represents the number of track writes received from components above and processed in fast write mode.
ibm.storwize.volume.writeiosIBM Storwize Volume Write IOspsecThe cumulative count of all writes.
ibm.storwize.volume.statusIBM Storwize Volume StatusNULLStatus of the volume.

G2 - Linux Agentless Process Statistics

Description

Monitors the process statistics like instance count,Threads count,open fds count,cpu usage % and memory usage %,for Linux OS through Linux gateway.

Template Usage Guidelines:

Template expects user to provide input parameters in any one of the below three formats only:

Format 1: The format uses ::: to delimit mode and processes.
Format 2: The format uses @@@ to delimit multiple processes.
Format 3: The format uses ;;; to delimit processes and their friendly names.

Notes:

  • In the first two formats (with “includeArgs” and “excludeArgs” as modes),a friendly name is mandatory.
  • In formats 1 and 2,if the provided process name or process regex matches multiple process names in the system,the template will provide collective data for all of them,using the friendly name provided by the user as the component name.
  • In Format 3 (with the mode set to ‘exactProcessName’),regex patterns and friendly names are not supported. This format only works for exact process names present in the system.

Format 1: Template will match the given process name or process regex only with the process names in the system.

Valid Case Example:

excludeArgs:::opsramp.*;;;opsramp@@@systemd.*;;;systemd

Invalid Case Example:

excludeArgs:::opsramp.*;;;opsramp@@@systemd.*

Format 2: Template will match the given process name or process regex with all the process names and its arguments in the system.

Valid Case Example:

includeArgs:::opsramp.*;;;opsramp@@@systemd.*;;;systemd

Invalid Case Example:

includeArgs:::opsramp.*@@@systemd.*

Format 3: Template will collect monitoring data,only if the given exact process name is found in the system.

Valid Case Example:

exactProcessName:::opsramp-agent@@@scriptagent.bin

Invalid Case Example:

exactProcessName:::opsramp.*

Prerequisites

This template only works on Linux machines managed by Linux Gateway.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - Linux Agentless Process Statistics Monitorprocess_instances_countProcess Instances CountCountMonitors Instance count of each process of Linux Device.
process_threads_countProcess Threads CountCountMonitors thread count of each process of Linux Device
process_openfds_countProcess Openfds CountCountMonitors open file descriptors count of each process of Linux Device.
process_memory_utilization_in_percentageProcess Memory Utilization PercentagePercentageMonitors Memory Usage of each process of Linux Device.
prcoess_cpu_utilization_in_percentagePrcoess CPU Utilization PercentagePercentageMonitors Cpu Usage of each process of Linux Device.

G2 - Linux - PostgresDB Aliveness Check Status

Description

To monitor the aliveness of the postgres database

Prerequisites

  • Gateway 7.0.0 and above.
  • SSH credentials assigned on target machine and must have permission to access the provided .env file.
  • Create a Postgres environment file and provide the file path as input parameter while applying the template.
  • You need to provide env path for single instance - <env path> & for multiple instances - <env path>,<env path2>,<env path3>
  • Along with setting up postgres environment this env file should contain other parameters like PGDATABASE,PGARCHIVEDIR,PGDATADIR,PGWALDIR,PGPORT,SERVICENAME."

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - Linux - PostgresDB Aliveness Check Status Monitorpostgres_check_dbalivePostgres Check DBAlivePostgres Check DBAlive

G2 - Linux - PostgresDB Aliveness Check Status - v2

Description

To monitor the aliveness of the postgres database

Template Usage Guidelines:

  • Create a Postgres environment file and provide the file path as input parameter while applying the template.
  • We need to provide env path for single instance - <env path> & for multiple instances - <env path1>,<env path2>,<env path3>
  • Along with setting up postgres environment,this env file should contain other parameters like PGDATABASE,PGARCHIVEDIR,PGDATADIR,PGWALDIR,PGPORT,SERVICENAME.
  • Sample pg_new_5432.env file data: export PATH=$PATH:/usr/pgsql-12/bin/ PGDATABASE=postgres PGPORT=5432 PGARCHIVEDIR=/var/lib/pgsql/backups_main/archive/ PGDATADIR=/var/lib/pgsql/12/data PGWALDIR=/var/lib/pgsql/12/data/pg_wal SERVICENAME=postgresql-12

Prerequisites

SSH Credentials need to be assigned on end device.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - Linux - PostgresDB Aliveness Check Status Monitor - v2postgres_check_dbalivePostgres Check DBAliveTo monitor the aliveness of the postgres database

G2 MSSQL Database Access Methods Template

Description

G2 MSSQL Database Access Methods Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Access Methods Monitormssql.page.splitsPage splitspsecThe number of page splits per second that occur as the result of overflowing index pages.
mssql.full.scansFull scanspsecNumber of unrestricted full scans. These can either be base table or full index scans.

G2 MSSQL Database Access Methods Template - v2.0

Description

This template supports windows and SQL server authentication modes Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above,SQL Server 2008 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Access Methods Monitor - v2.0mssql.page.splitsPage splitspsecThe number of page splits per second that occur as the result of overflowing index pages.
mssql.full.scansFull scanspsecNumber of unrestricted full scans. These can either be base table or full index scans.

G2 MSSQL Database Agent Jobs Template

Description

This template supports for both SQL and Windows Authentication. Integration is done through JDBC and MSSQL queries and tested in MSSQL v18.9.1

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-MSSQLDB-Agent Jobs Monitormssql_db_agentJobsStatusMSSQL DB Agent Jobs StatusNULLMSSQL DB Agent Jobs Status : This metric collects mssql agent job status latest information (in last 15mins only): Below are the possible status values - 0 : Failed 1 : Successful 2 : Retry 3 : Cancelled 4 : InProgress

G2 MSSQL Database AlwaysOn Template

Description

This template supports for both SQL and Windows Authentication. Integration is done through JDBC and MSSQL queries and tested in MSSQL v18.9.1.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-MSSQLDB-AlwaysON Monitormssql_db_alwaysOn_AG_SynchronizationHealth8MSSQL AlwaysOn Availability Group Synchronization HealthNULLMSSQL AlwaysOn Availability Group Synchronization Health - Below are the possible values: 0 : NOT_HEALTHY 1 : PARTIALLY_HEALTHY 2 : HEALTHY
mssql_db_alwaysOn_DBAvailability_SynchronizationHealthMSSQL AlwaysOn DataBase Availability Synchronization HealthNULLMSSQL AlwaysOn DataBase Availability Synchronization Health - Below are the possible states: 0 : NOT_HEALTHY 1 : PARTIALLY_HEALTHY 2 : HEALTHY
mssql_db_alwaysOn_listener_stateMSSQL AlwaysOn Listener StateNULLMSSQL AlwaysOn Listener State - Below are the possible values: 0 : OFFLINE 1 : ONLINE 2 : ONLINE_PENDING 3 : FAILED

G2 MSSQL Database AlwaysOn Template - v2

Description

This template supports for both SQL and Windows Authentication. Integration is done through JDBC and MSSQL queries and tested in MSSQL v18.9.1.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-MSSQLDB-AlwaysON Monitormssql_db_alwaysOn_AG_SynchronizationHealth8MSSQL AlwaysOn Availability Group Synchronization HealthNULLMSSQL AlwaysOn Availability Group Synchronization Health - Below are the possible values: 0 : NOT_HEALTHY 1 : PARTIALLY_HEALTHY 2 : HEALTHY
mssql_db_alwaysOn_DBAvailability_SynchronizationHealthMSSQL AlwaysOn DataBase Availability Synchronization HealthNULLMSSQL AlwaysOn DataBase Availability Synchronization Health - Below are the possible states: 0 : NOT_HEALTHY 1 : PARTIALLY_HEALTHY 2 : HEALTHY
mssql_db_alwaysOn_listener_stateMSSQL AlwaysOn Listener StateNULLMSSQL AlwaysOn Listener State - Below are the possible values: 0 : OFFLINE 1 : ONLINE 2 : ONLINE_PENDING 3 : FAILED
mssql_db_alwaysOn_agListener_ConsolidatedStateMSSQL DB AlwaysOn AGListener Consolidated StateNULLMonitors MSSQL AlwaysOn Listener Consolidated State with same dnsName. If state = (0 - offline)/(2 - online pending)/(3 - Failed) as Critical and State = (1 - Online) as Ok

G2 - MSSQL Database Availability SQL Server Authentication

Description

MSSQL DB Database Availability SQL Server Authentication

Note: 1. Need to provide \\ (backward slashes) instead of \ (single slash). If the SQLServerName contains DomainName\UserName need to provide like this DomainName\\UserName 2. Add the credential set with this name SQL_credentials

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL Database Availability SQL Server Authenticationmssql_db_database_availability_sql_authMSSQL DB Database Availability SQL Server AuthenticationNULLMSSQL DB Database Availability SQL Server Authentication.
Note: 1. Need to provide \\\\ (backward slashes) instead of \\ (single slash). If the SQLServerName contains DomainName\\UserName need to provide like this DomainName\\\\UserName 2. Add the credential set with this name SQL_credentials

G2 MSSQL Database Backup Template

Description

This template supports for both SQL and Windows Authentication. Integration is done through JDBC and MSSQL queries and tested in MSSQL v18.9.1

Prerequisites

Gateway 7.0.0 and above.4

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-MSSQLDB-Backup Monitormssql_db_backup_daysSinceLastDifferentialBackupMSSQL DB Backup Days Since Last Differential BackupDaysMSSQL DB Backup Days Since Last Differential Backup
mssql_db_backup_daysSinceLastFullBackupMSSQL DB Backup Days Since Last Full BackupDaysMSSQL DB Backup Days Since Last Full Backup
mssql_db_backup_daysSinceLastLogBackupMSSQL DB Backup Days Since Last Log BackupDaysMSSQL DB Backup Days Since Last Log Backup

G2 MSSQL Database Buffer Template

Description

G2 MSSQL Database Buffer Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Buffer Monitormssql.database.page.readsPage readspsecNumber of physical database page reads issued.
mssql.database.page.writesDatabase Page writeswpsNumber of physical database page writes issued.
mssql.buffer.lazy.writesBuffer lazy writeswpsNumber of buffers written by buffer manager's lazy writer.
mssql.checkpoint.pagesCheckpoint pagespsecIndicates the number of pages flushed to disk per second by a checkpoint or other operation that require all dirty pages to be flushed.

G2 MSSQL Database Buffer Template - v2.0

Description

This template supports windows and SQL server authentication modes Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above,SQL Server 2008 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Buffer Monitor - v2.0mssql.database.page.readsPage readspsecNumber of physical database page reads issued.
mssql.database.page.writesDatabase Page writeswpsNumber of physical database page writes issued.
mssql.buffer.lazy.writesBuffer lazy writeswpsNumber of buffers written by buffer manager's lazy writer.
mssql.checkpoint.pagesCheckpoint pagespsecIndicates the number of pages flushed to disk per second by a checkpoint or other operation that require all dirty pages to be flushed.

G2 MSSQL Database CPU Template

Description

This template supports for both SQL and Windows Authentication. Integration is done through JDBC and MSSQL queries and tested in MSSQL v18.9.1.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-MSSQLDB-CPU Monitormssql_cpuIoBusyMSSQL CPU I0BusymicrosecMSSQL CPU IoBusy
mssql_cpuIdleMSSQL CPU IDLEmicrosecMSSQL CPU IDLE
mssql_cpuBusyMSSQL CPU BusymicrosecMSSQL CPU Busy

G2 MSSQL Database Databases Template

Description

G2 MSSQL Database Databases Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Databases Monitormssql.log.flushesLog FlushespsecThe number of log flushes.
mssql.db.transactionsDb transactionspsecThe number of transactions started for the database.
mssql.db.data.file.sizeData File SizeKBThe cumulative size of all the data files in the database.
mssql.lock.deadlocksDeadlockspsecThe number of lock requests that resulted in a deadlock.

G2 MSSQL Database Databases Template - v2.0

Description

This template supports windows and SQL server authentication modes Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above,SQL Server 2008 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Databases Monitor - v2.0mssql.log.flushesLog FlushespsecThe number of log flushes.
mssql.db.transactionsDb transactionspsecThe number of transactions started for the database.
mssql.db.data.file.sizeData File SizeKBThe cumulative size of all the data files in the database.
mssql.lock.deadlocksDeadlockspsecThe number of lock requests that resulted in a deadlock.

G2 MSSQL Database General Statistics Template

Description

G2 MSSQL Database General Statistics Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database General Statistics Monitormssql.user.connectionsUser connectionsNULLThe number of users connected to the system.
mssql.blocked.processBlocked processesNULLThe number of currently blocked processes.

G2 MSSQL Database General Statistics Template - v2.0

Description

This template supports windows and SQL server authentication modes Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above,SQL Server 2008 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database General Statistics Monitor - v2.0mssql.user.connectionsUser connectionsNULLThe number of users connected to the system.
mssql.blocked.processBlocked processesNULLThe number of currently blocked processes.

G2 MSSQL Database Latches Template

Description

G2 MSSQL Database Latches Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Latches Monitormssql.latch.waitsLatch waitspsecNumber of latch requests that could not be granted immediately and had to wait before being granted.

G2 MSSQL Database Latches Template - v2.0

Description

This template supports windows and SQL server authentication modes Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above,SQL Server 2008 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Latches Monitor - v2.0mssql.latch.waitsLatch waitspsecNumber of latch requests that could not be granted immediately and had to wait before being granted.

G2 MSSQL Database Locks Template

Description

G2 MSSQL Database Locks Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Locks Monitormssql.lock.waitsLock waitspsecNumber of lock requests that could not be satisfied immediately and required the caller to wait before being granted the lock.
mssql.avg.lock.wait.timeAverage lock wait timemsThe average amount of wait time (milliseconds) for each lock request that resulted in a wait.
mssql.lock.timeoutsLock timeoutspsecNumber of lock requests that timed out. This includes requests for no wait locks.

G2 MSSQL Database Locks Template - v2.0

Description

This template supports windows and SQL server authentication modes Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above,SQL Server 2008 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Locks Monitor - v2.0mssql.lock.waitsLock waitspsecNumber of lock requests that could not be satisfied immediately and required the caller to wait before being granted the lock.
mssql.avg.lock.wait.timeAverage lock wait timemsThe average amount of wait time (milliseconds) for each lock request that resulted in a wait.
mssql.lock.timeoutsLock timeoutspsecNumber of lock requests that timed out. This includes requests for no wait locks.

G2 MSSQL Database Memory Manager Template

Description

G2 MSSQL Database Memory Manager Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Memory Manager Monitormssql.total.server.memoryTotal server memoryKBTotal amount of dynamic memory the server is currently consuming
mssql.memory.grants.pendingMemory Grants PendingNULLCurrent number of processes waiting for a workspace memory grant
mssql.database.cache.memoryDatabase cache memoryKBAmount of memory the server is currently using for the database cache.
mssql.connection.memoryConnection MemoryKBTotal amount of dynamic memory the server is using for maintaining connections.
mssql.lock.memoryLock MemoryKBTotal amount of dynamic memory the server is using for locks
mssql.free.memoryFree MemoryKBAmount of memory the server is currently not using.
mssql.sql.cache.memorySQL Cache MemoryKBTotal amount of dynamic memory the server is using for the dynamic SQL cache
mssql.optimizer.memoryOptimizer MemoryKBTotal amount of dynamic memory the server is using for query optimization

G2 MSSQL Database Memory Manager Template - v2.0

Description

This template supports windows and SQL server authentication modes Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above,SQL Server 2008 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Memory Manager Monitor - v2.0mssql.total.server.memoryTotal server memoryKBTotal amount of dynamic memory the server is currently consuming
mssql.memory.grants.pendingMemory Grants PendingNULLCurrent number of processes waiting for a workspace memory grant
mssql.database.cache.memoryDatabase cache memoryKBAmount of memory the server is currently using for the database cache.
mssql.connection.memoryConnection MemoryKBTotal amount of dynamic memory the server is using for maintaining connections.
mssql.lock.memoryLock MemoryKBTotal amount of dynamic memory the server is using for locks
mssql.free.memoryFree MemoryKBAmount of memory the server is currently not using.
mssql.sql.cache.memorySQL Cache MemoryKBTotal amount of dynamic memory the server is using for the dynamic SQL cache
mssql.optimizer.memoryOptimizer MemoryKBTotal amount of dynamic memory the server is using for query optimization

G2 MSSQL Database Miscellaneous Template

Description

G2 MSSQL Database Miscellaneous Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Miscellaneous Monitormsql.last.elapsed.timeLast elapsed timemicrosecElapsed time,reported in microseconds (but only accurate to milliseconds),for the most recently completed execution of this plan.
mssql.buffer.cache.hit.ratioBuffer cache hit ratioNonePercentage of pages that were found in the buffer pool without having to incur a read from disk.
mssql.procedure.cache.hit.ratioProcedure Cache Hit RatioNULLProcedure Cache Hit ratio (calculated from server start-up)
mssql.page.life.expectancyMSSQL PageLifeExpectancysNumber of seconds a page will stay in the buffer pool without references.

G2 MSSQL Database Miscellaneous Template - v2.0

Description

This template supports windows and SQL server authentication modes Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above,SQL Server 2008 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Miscellaneous Monitor - v2.0msql.last.elapsed.timeLast elapsed timemicrosecElapsed time,reported in microseconds (but only accurate to milliseconds),for the most recently completed execution of this plan.
mssql.buffer.cache.hit.ratioBuffer cache hit ratioNonePercentage of pages that were found in the buffer pool without having to incur a read from disk.
mssql.procedure.cache.hit.ratioProcedure Cache Hit RatioNULLProcedure Cache Hit ratio (calculated from server start-up)
mssql.page.life.expectancyMSSQL PageLifeExpectancysNumber of seconds a page will stay in the buffer pool without references.

G2 MSSQL Database Resource pool Stats Template

Description

G2 MSSQL Database Resource pool Stats Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Resource pool Stats Monitormssql.resource.pool.used.memoryResource pool used memoryKBThe amount of memory used,in kilobytes (KB),for the resource pool.
mssql.resource.pool.disk.read.ioResource pool disk read IOropsNumber of read operations from the disk in the last second.
mssql.resource.pool.disk.write.ioResource pool disk write IOwpsNumber of bytes written to the disk in the last second.

G2 MSSQL Database Resource pool Stats Template - v2.0

Description

This template supports windows and SQL server authentication modes Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above,SQL Server 2008 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Resource pool Stats Monitor - v2.0mssql.resource.pool.used.memoryResource pool used memoryKBThe amount of memory used,in kilobytes (KB),for the resource pool.
mssql.resource.pool.disk.read.ioResource pool disk read IOropsNumber of read operations from the disk in the last second.
mssql.resource.pool.disk.write.ioResource pool disk write IOwpsNumber of bytes written to the disk in the last second.

G2 MSSQL Database SQL Statistics Template

Description

G2 MSSQL Database SQL Statistics Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database SQL Statistics Monitormssql.batch.requestsBatch requestspsecNumber of SQL batch requests received by server.
mssql.sql.compilationsSql compilationspsecNumber of SQL compilations.
msql.sql.recompilationsSql recompilationspsecNumber of statement recompiles per second. Counts the number of times statement recompiles are triggered. Generally,you want the recompiles to be low.

G2 MSSQL Database SQL Statistics Template - v2.0

Description

This template supports windows and SQL server authentication modes Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above,SQL Server 2008 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database SQL Statistics Monitor - v2.0mssql.batch.requestsBatch requestspsecNumber of SQL batch requests received by server.
mssql.sql.compilationsSql compilationspsecNumber of SQL compilations.
msql.sql.recompilationsSql recompilationspsecNumber of statement recompiles per second. Counts the number of times statement recompiles are triggered. Generally,you want the recompiles to be low.

G2 MSSQL Database Transactions Time Template

Description

G2 MSSQL Database Transactions Time Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Transactions Monitormssql.longest.transaction timeLongest transaction timesThe length of time (in seconds) since the start of the transaction that has been active longer than any other current transaction. This counter only shows activity when the database is under read committed snapshot isolation level. It does not log any activity if the database is in any other isolation level.

G2 MSSQL Database Transactions Time Template - v2.0

Description

This template supports windows and SQL server authentication modes Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above,SQL Server 2008 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MSSQL Database Transactions Monitor - v2.0mssql.longest.transaction timeLongest transaction timesThe length of time (in seconds) since the start of the transaction that has been active longer than any other current transaction. This counter only shows activity when the database is under read committed snapshot isolation level. It does not log any activity if the database is in any other isolation level.

G2 MySQL Database Command Template

Description

G2 MySQL Database Command Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MySQL Database Command Monitormysql.update.commandsMySQL Update CommandspsecThe number of times UPDATE command has been executed.
mysql.select.commandsMySQL Select CommandpsecThe number of times SELECT command has been executed
mysql.delete.commandsMySQL Delete CommandpsecThe number of times Delete command has been executed
mysql.insert.commandsMySQL Insert CommandpsecThe number of times Insert command has been executed
mysql.rollback.commandsMySQL Rollback CommandpsecThe number of times RollBack command has been executed
mysql.droptable.commandsMySQL DropTable CommandpsecThe number of times Drop Table command has been executed
mysql.dropuser.commandsMySQL Dropuser CommandspsecThe number of times DROP USER command has been executed.
mysql.dropdatabase.commandsMySQL DropDatabase CommandspsecThe number of times DROP DATABASE command has been executed.
mysql.createtable.commandsMySQL CreateTable CommandspsecThe number of times CREATE TABLE command has been executed.
mysql.createuser.commandsMySQL Createuser CommandspsecThe number of times CREATE USER command has been executed.
mysql.createdatabase.commandsMySQL Createdatabase CommandspsecThe number of times CREATE DATABASE command has been executed.
mysql.slow.query.countMySQL Slow Query CountqpmMySQL Slow Query Count.

G2 MySQL Database Connection Template

Description

G2 MySQL Database Connection Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MySQL Database Connection Monitormysql.aborted.clientsMySQL Aborted ClientscountThe number of connections that were aborted because the client died without closing the connection properly.
mysql.max.connectionsMySQL Max ConnectionscountMax Limit of Connections.
mysql.max.connections.connection_errorsMySQL Max Connections Connection ErrorscountThe number of connections refused due to internal server errors.
mysql.aborted.connectsMySQL Aborted ConnectscountThe number of failed attempts to connect to the MySQL server.
mysql.internal.connection.errorsMySQL Internal Connection ErrorscountThe number of connections refused due to internal errors in the server,such as failure to start a new thread or an out-of-memory condition.
mysql.ssl.client.connectsMySQL SSL Client ConnectscountThe number of SSL connection attempts to an SSL-enabled master.
mysql.active.transactionsMySQL Active TransactionscountNumber of active transactions
mysql.server.connectionsMySQL Server ConnectionscountThe number of connection attempts (successful or not) to the MySQL server.

G2 MySQL Database innoDB Template

Description

G2 MySQL Database innoDB Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MySQL Database innoDB Monitormysql.innodb.data.pending.readsMySQL Innodb Data Pending ReadscountThe current number of pending reads.
mysql.innodb.data.pending.writesMySQL Innodb Data Pending WritescountThe total number of data writes.
mysql.innodb.bufferpool.pagesfreeMySQL Innodb Buffer Pool Pages freecountThe number of free pages in the InnoDB Buffer Pool.
mysql.innodb.bufferpool.pagestotalMysql Innodb Bufferpool PagestotalcountThe total number of pages in the InnoDB Buffer Pool.
mysql.innodb.buffer_pool_readsMySQL Innodb Bufferpool ReadscountThe number of logical reads that InnoDB could not satisfy from the buffer pool,and had to read directly from the disk.
mysql.innodb.buffer_pool_read_requestsMySQL Innodb Bufferpool Read RequestscountThe number of reads done to the InnoDB buffer pool.
mysql.innodb.buffer_pool_write_requestsMySQL Innodb Bufferpool Write RequestscountThe number of writes done to the InnoDB buffer pool.
mysql.innodb.bufferpool.dirtypagesMysql Innodb Bufferpool DirtypagescountThe current number of dirty pages in the InnoDB buffer pool.
mysql.innodb.bufferpool.utilizationMySQL Innodb Bufferpool Utilization%The utilization of the InnoDB Buffer Pool. Shown as fraction
mysql.innodb.data.readsMySQL Innodb Data ReadscountThe total number of data reads (OS file reads).
mysql.innodb.data.writesMySQL InnoDB Data WritescountThe total number of data writes.
mysql.innodb.row.lock.waitsMySQL Innodb Row Lock waitscountThe number of times operations on InnoDB tables had to wait for a row lock.
mysql.innodb.row.lock.timemysql Innodb Row Lock TimemsThe total time spent in acquiring row locks for InnoDB tables,in milliseconds.

G2 MySQL Database Miscellaneous Template

Description

G2 MySQL Database Miscellaneous Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MySQL Database Miscellaneous Monitormysql.slave.statusMySQL Slave StatusMySQL Slave Status.
mysq.slave.seconds.behind.masterMySQL Slave behind masterMySQL Slave behind master.
mysql.system.uptimeMySQL System UptimemMySQL System Uptime.
mysql.streams.openMySQL Streams OpencountThe number of streams that are open (used mainly for logging).

G2 - MSSQL Database Monitoring

Description

Monitors MSSQL Database metrics like mssql.avg.lock.wait.time,mssql.buffer.cache.hit.ratio,mssql.sql.cache.memory,mssql.db.data.file.size,mssql_db_databases_count,mssql.full.scans,mssql.database.page.reads,mssql.database.page.writes,mssql_server_uptime,mssql.total.server.memory,mssql.db.transactions,mssql_db_database_status,mssql_db_database_active_users,mssql_db_database_datafiles_freespace,mssql_db_database_freespace,mssql_db_database_log_cachehit_ratio,mssql_db_database_logfiles_freespace.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL Database Backup Statusmssql_db_backup_minutesSinceLastFullBackupMSSQL Database Backup status in minutes since Last Full BackupmMonitors Database Backup status in Minutes since Last Full Backup
vmssql_db_minutesSinceLastTransaction_log_backupMSSQL DB Minutes Since Last Transaction Log BackupmMonitors Database transaction log backup in minutes
G2 - MSSQL Database Monitoringmssql.database.page.writesDatabase Page writeswpsNumber of physical database page writes issued.
mssql.sql.cache.memorySQL Cache MemoryKBTotal amount of dynamic memory the server is using for the dynamic SQL cache
mssql_db_database_logfiles_freespaceMSSQL database LogFiles Freespace%Monitors MSSQL database LogFiles free space
mssql.db.transactionsDb transactionspsecThe number of transactions started for the database.
mssql.avg.lock.wait.timeAverage lock wait timemsThe average amount of wait time (milliseconds) for each lock request that resulted in a wait.
mssql_db_database_statusMSSQ DB Database StatusNULL0 = ONLINE 1 = RESTORING 2 = RECOVERING SQL Server 2008 and later 3 = RECOVERY_PENDING SQL Server 2008 and later 4 = SUSPECT 5 = EMERGENCY SQL Server 2008 and later 6 = OFFLINE SQL Server 2008 and later 7 = COPYING Azure SQL Database Active Geo-Replication 10 = OFFLINE_SECONDARY Azure SQL Database Active Geo-Replication
mssql.database.page.readsPage readspsecNumber of physical database page reads issued.
mssql_db_databases_countMSSQL DB Databases CountcountShow the count of total number of databases
mssql.buffer.cache.hit.ratioBuffer cache hit ratioNonePercentage of pages that were found in the buffer pool without having to incur a read from disk.
mssql_db_database_freespaceMSSQL Database Freespace%Monitors Database Freespace in Percentage
mssql_server_uptimeMSSQL Server UptimeDaysMonitors the uptime (in days) of the database server
mssql.total.server.memoryTotal server memoryKBTotal amount of dynamic memory the server is currently consuming
mssql_db_database_datafiles_freespaceMSSQL Database DataFiles FreeSpace%Monitors datafiles free space regardless of auto-growth
mssql_db_database_active_usersMSSQL Database Active UserscountMonitors the number of active user transactions per database.
mssql_db_database_log_cachehit_ratioMSSQL Database Log CacheHit Ratio%Monitors MSSQL database log cache-hit ratio
mssql.db.data.file.sizeData File SizeKBThe cumulative size of all the data files in the database.
mssql.full.scansFull scanspsecNumber of unrestricted full scans. These can either be base table or full index scans.
G2-MSSQLDB-Agent Jobs Monitormssql_db_agentJobsStatusMSSQL DB Agent Jobs StatusNULLMSSQL DB Agent Jobs Status : This metric collects mssql agent job status latest information (in last 15mins only): Below are the possible status values - 0 : Failed 1 : Successful 2 : Retry 3 : Cancelled 4 : InProgress

G2 - MSSQL Database Monitoring - v2

Description

Monitors MSSQL Database metrics like mssql.avg.lock.wait.time,mssql.buffer.cache.hit.ratio,mssql.sql.cache.memory,mssql.db.data.file.size,mssql_db_databases_count,mssql.full.scans,mssql.database.page.reads,mssql.database.page.writes,mssql_server_uptime,mssql.total.server.memory,mssql.db.transactions,mssql_db_database_status,mssql_db_database_active_users,mssql_db_database_datafiles_freespace,mssql_db_database_freespace,mssql_db_database_log_cachehit_ratio,mssql_db_database_logfiles_freespace

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL Database Backup Status - v2mssql_db_backup_minutesSinceLastFullBackupMSSQL Database Backup status in minutes since Last Full BackupmMonitors Database Backup status in Minutes since Last Full Backup
vmssql_db_minutesSinceLastTransaction_log_backupMSSQL DB Minutes Since Last Transaction Log BackupmMonitors Database transaction log backup in minutes
G2 - MSSQL Database Monitoring - v2mssql.database.page.writesDatabase Page writeswpsNumber of physical database page writes issued.
mssql.sql.cache.memorySQL Cache MemoryKBTotal amount of dynamic memory the server is using for the dynamic SQL cache
mssql_db_database_logfiles_freespaceMSSQL database LogFiles Freespace%Monitors MSSQL database LogFiles free space
mssql.db.transactionsDb transactionspsecThe number of transactions started for the database.
mssql.avg.lock.wait.timeAverage lock wait timemsThe average amount of wait time (milliseconds) for each lock request that resulted in a wait.
mssql_db_database_statusMSSQ DB Database StatusNULL0 = ONLINE 1 = RESTORING 2 = RECOVERING SQL Server 2008 and later 3 = RECOVERY_PENDING SQL Server 2008 and later 4 = SUSPECT 5 = EMERGENCY SQL Server 2008 and later 6 = OFFLINE SQL Server 2008 and later 7 = COPYING Azure SQL Database Active Geo-Replication 10 = OFFLINE_SECONDARY Azure SQL Database Active Geo-Replication
mssql.database.page.readsPage readspsecNumber of physical database page reads issued.
mssql_db_databases_countMSSQL DB Databases CountcountShow the count of total number of databases
mssql.buffer.cache.hit.ratioBuffer cache hit ratioNonePercentage of pages that were found in the buffer pool without having to incur a read from disk.
mssql_db_database_freespaceMSSQL Database Freespace%Monitors Database Freespace in Percentage
mssql_server_uptimeMSSQL Server UptimeDaysMonitors the uptime (in days) of the database server
mssql.total.server.memoryTotal server memoryKBTotal amount of dynamic memory the server is currently consuming
mssql_db_database_datafiles_freespaceMSSQL Database DataFiles FreeSpace%Monitors datafiles free space regardless of auto-growth
mssql_db_database_active_usersMSSQL Database Active UserscountMonitors the number of active user transactions per database.
mssql_db_database_log_cachehit_ratioMSSQL Database Log CacheHit Ratio%Monitors MSSQL database log cache-hit ratio
mssql.db.data.file.sizeData File SizeKBThe cumulative size of all the data files in the database.
mssql.full.scansFull scanspsecNumber of unrestricted full scans. These can either be base table or full index scans.
G2-MSSQLDB-Agent Jobs Monitormssql_db_agentJobsStatusMSSQL DB Agent Jobs StatusNULLMSSQL DB Agent Jobs Status : This metric collects mssql agent job status latest information (in last 15mins only): Below are the possible status values - 0 : Failed 1 : Successful 2 : Retry 3 : Cancelled 4 : InProgress

G2 - MSSQL Database Monitoring - v3

Description

Monitors MSSQL Database metrics like mssql.avg.lock.wait.time,mssql.buffer.cache.hit.ratio,mssql.sql.cache.memory,mssql.db.data.file.size,mssql_db_databases_count,mssql.full.scans,mssql.database.page.reads,mssql.database.page.writes,mssql_server_uptime,mssql.total.server.memory,mssql.db.transactions,mssql_db_database_status,mssql_db_database_active_users,mssql_db_database_datafiles_freespace,mssql_db_database_freespace,mssql_db_database_log_cachehit_ratio,mssql_db_database_logfiles_freespace

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL Database Backup Status - v2mssql_db_backup_minutesSinceLastFullBackupMSSQL Database Backup status in minutes since Last Full BackupmMonitors Database Backup status in Minutes since Last Full Backup
vmssql_db_minutesSinceLastTransaction_log_backupMSSQL DB Minutes Since Last Transaction Log BackupmMonitors Database transaction log backup in minutes
G2 - MSSQL Database Monitoring - v3mssql.database.page.writesDatabase Page writeswpsNumber of physical database page writes issued.
mssql.sql.cache.memorySQL Cache MemoryKBTotal amount of dynamic memory the server is using for the dynamic SQL cache
mssql_db_database_logfiles_freespaceMSSQL database LogFiles Freespace%Monitors MSSQL database LogFiles free space
mssql.db.transactionsDb transactionspsecThe number of transactions started for the database.
mssql.avg.lock.wait.timeAverage lock wait timemsThe average amount of wait time (milliseconds) for each lock request that resulted in a wait.
mssql_db_database_statusMSSQ DB Database StatusNULL0 = ONLINE 1 = RESTORING 2 = RECOVERING SQL Server 2008 and later 3 = RECOVERY_PENDING SQL Server 2008 and later 4 = SUSPECT 5 = EMERGENCY SQL Server 2008 and later 6 = OFFLINE SQL Server 2008 and later 7 = COPYING Azure SQL Database Active Geo-Replication 10 = OFFLINE_SECONDARY Azure SQL Database Active Geo-Replication
mssql.database.page.readsPage readspsecNumber of physical database page reads issued.
mssql_db_databases_countMSSQL DB Databases CountcountShow the count of total number of databases
mssql.buffer.cache.hit.ratioBuffer cache hit ratioNonePercentage of pages that were found in the buffer pool without having to incur a read from disk.
mssql_db_database_freespaceMSSQL Database Freespace%Monitors Database Freespace in Percentage
mssql_server_uptimeMSSQL Server UptimeDaysMonitors the uptime (in days) of the database server
mssql.total.server.memoryTotal server memoryKBTotal amount of dynamic memory the server is currently consuming
mssql_db_database_datafiles_freespaceMSSQL Database DataFiles FreeSpace%Monitors datafiles free space regardless of auto-growth
mssql_db_database_active_usersMSSQL Database Active UserscountMonitors the number of active user transactions per database.
mssql_db_database_log_cachehit_ratioMSSQL Database Log CacheHit Ratio%Monitors MSSQL database log cache-hit ratio
mssql.db.data.file.sizeData File SizeKBThe cumulative size of all the data files in the database.
mssql.full.scansFull scanspsecNumber of unrestricted full scans. These can either be base table or full index scans.
G2-MSSQLDB-Agent Jobs Monitormssql_db_agentJobsStatusMSSQL DB Agent Jobs StatusNULLMSSQL DB Agent Jobs Status : This metric collects mssql agent job status latest information (in last 15mins only): Below are the possible status values - 0 : Failed 1 : Successful 2 : Retry 3 : Cancelled 4 : InProgress

G2 - MSSQL Database Monitoring - v4

Description

Monitors MSSQL Database metrics like mssql.avg.lock.wait.time,mssql.buffer.cache.hit.ratio,mssql.sql.cache.memory,mssql.db.data.file.size,mssql_db_databases_count,mssql.full.scans,mssql.database.page.reads,mssql.database.page.writes,mssql_server_uptime,mssql.total.server.memory,mssql.db.transactions,mssql_db_database_status,mssql_db_database_active_users,mssql_db_database_datafiles_freespace,mssql_db_database_freespace,mssql_db_database_log_cachehit_ratio,mssql_db_database_logfiles_freespace

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL Database Backup Status - v2mssql_db_backup_minutesSinceLastFullBackupMSSQL Database Backup status in minutes since Last Full BackupmMonitors Database Backup status in Minutes since Last Full Backup
vmssql_db_minutesSinceLastTransaction_log_backupMSSQL DB Minutes Since Last Transaction Log BackupmMonitors Database transaction log backup in minutes
G2 - MSSQL Database Monitoring - v4mssql.database.page.writesDatabase Page writeswpsNumber of physical database page writes issued.
mssql.sql.cache.memorySQL Cache MemoryKBTotal amount of dynamic memory the server is using for the dynamic SQL cache
mssql_db_database_logfiles_freespaceMSSQL database LogFiles Freespace%Monitors MSSQL database LogFiles free space
mssql.db.transactionsDb transactionspsecThe number of transactions started for the database.
mssql.avg.lock.wait.timeAverage lock wait timemsThe average amount of wait time (milliseconds) for each lock request that resulted in a wait.
mssql_db_database_statusMSSQ DB Database StatusNULL0 = ONLINE 1 = RESTORING 2 = RECOVERING SQL Server 2008 and later 3 = RECOVERY_PENDING SQL Server 2008 and later 4 = SUSPECT 5 = EMERGENCY SQL Server 2008 and later 6 = OFFLINE SQL Server 2008 and later 7 = COPYING Azure SQL Database Active Geo-Replication 10 = OFFLINE_SECONDARY Azure SQL Database Active Geo-Replication
mssql.database.page.readsPage readspsecNumber of physical database page reads issued.
mssql_db_databases_countMSSQL DB Databases CountcountShow the count of total number of databases
mssql.buffer.cache.hit.ratioBuffer cache hit ratioNonePercentage of pages that were found in the buffer pool without having to incur a read from disk.
mssql_db_database_freespaceMSSQL Database Freespace%Monitors Database Freespace in Percentage
mssql_server_uptimeMSSQL Server UptimeDaysMonitors the uptime (in days) of the database server
mssql.total.server.memoryTotal server memoryKBTotal amount of dynamic memory the server is currently consuming
mssql_db_database_datafiles_freespaceMSSQL Database DataFiles FreeSpace%Monitors datafiles free space regardless of auto-growth
mssql_db_database_active_usersMSSQL Database Active UserscountMonitors the number of active user transactions per database.
mssql_db_database_log_cachehit_ratioMSSQL Database Log CacheHit Ratio%Monitors MSSQL database log cache-hit ratio
mssql.db.data.file.sizeData File SizeKBThe cumulative size of all the data files in the database.
mssql.full.scansFull scanspsecNumber of unrestricted full scans. These can either be base table or full index scans.
mssql_buffer_cache_hit_ratio_percentBuffer cache hit ratio in PercentageNULLPercentage of pages that were found in the buffer pool without having to incur a read from disk.
G2-MSSQLDB-Agent Jobs Monitormssql_db_agentJobsStatusMSSQL DB Agent Jobs StatusNULLMSSQL DB Agent Jobs Status : This metric collects mssql agent job status latest information (in last 15mins only): Below are the possible status values - 0 : Failed 1 : Successful 2 : Retry 3 : Cancelled 4 : InProgress

G2 - MSSQL DB Filegroup Freespace

Description

G2 - MSSQL DB Filegroup Freespace

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL DB Filegroup Freespacemssql_db_filegroup_freespace_with_available_diskMSSQL DB Filegroup Freespace with Available Disk%Monitor MSSQL DB Filegroup Freespace with Available Disk
mssql_db_filegroup_freespaceMSSQL DB Filegroup Freespace%Monitors MSSQL DB Filegroup Freespace

G2 - MSSQL DB Filegroup Freespace - v2

Description

G2 - MSSQL DB Filegroup Freespace

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL DB Filegroup Freespace - v2mssql_db_filegroup_freespace_with_available_diskMSSQL DB Filegroup Freespace with Available Disk%Monitor MSSQL DB Filegroup Freespace with Available Disk
mssql_db_filegroup_freespaceMSSQL DB Filegroup Freespace%Monitors MSSQL DB Filegroup Freespace

G2 - MSSQL DB Instance CPU Utilization

Description

G2 - MSSQL DB Instance CPU Utilization

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL DB Instance CPU Utilizationmssql_db_instance_cpu_utilizationMSSQL Database Instance CPU Utilization%Monitors MSSQL Database Instance CPU Utilization in percentage

G2 - MSSQL DB Instance CPU Utilization - v2

Description

G2 - MSSQL DB Instance CPU Utilization

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL DB Instance CPU Utilization - v2mssql_db_instance_cpu_utilizationMSSQL Database Instance CPU Utilization%Monitors MSSQL Database Instance CPU Utilization in percentage

G2 - MSSQL DB Instance Free Connections

Description

G2 - MSSQL DB Instance Free Connections

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL DB Instance Free Connectionsmssql_db_instance_free_connectionsMSSQL Database Instance Free Connections%Monitors MSSQL Database Instance Free Connections in percentage

G2 - MSSQL DB Instance Free Connections - v2

Description

G2 - MSSQL DB Instance Free Connections

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL DB Instance Free Connections - v2mssql_db_instance_free_connectionsMSSQL Database Instance Free Connections%Monitors MSSQL Database Instance Free Connections in percentage

G2 - MSSQL DB LogFile Freespace with Available Disk

Description

G2 - MSSQL DB LogFile Freespace with Available Disk

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL DB LogFile Freespace with Available Diskmssql_db_logfile_freespace_with_available_diskMSSQL DB Logfile Freespace with Available Disk%Monitors MSSQL DB Logfile Freespace with Available Disk in percentage

G2 - MSSQL DB LogFile Freespace with Available Disk - v2

Description

G2 - MSSQL DB LogFile Freespace with Available Disk

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL DB LogFile Freespace with Available Disk - v2mssql_db_logfile_freespace_with_available_diskMSSQL DB Logfile Freespace with Available Disk%Monitors MSSQL DB Logfile Freespace with Available Disk in percentage

G2 - MSSQL DB Long Running Queries - v2

Description

G2 - MSSQL DB Long Running Queries

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL DB Long Running Queries - v2mssql_db_long_running_queries_last_5minMSSQL Database Long Running queries Last 5 minutescountMonitors MSSQL Database Long Running queries count Last 5 minutes

G2 - MSSQL DB Server IO Busy

Description

G2 - MSSQL DB Server IO Busy

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL DB Server IO Busymssql_db_server_IO_busyMSSQL DB Server IO Busy%Monitors MSSQL DB Server IO Busy

G2 - MSSQL DB Server IO Busy - v2

Description

G2 - MSSQL DB Server IO Busy

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL DB Server IO Busy - v2mssql_db_server_IO_busyMSSQL DB Server IO Busy%Monitors MSSQL DB Server IO Busy

G2 - MSSQL DB WorkSpace Memory

Description

G2 - MSSQL DB WorkSpace Memory

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL DB WorkSpace Memorymssql_db_workspace_memoryMSSQL Database Workspace Memory Percentage%Monitors MSSQL Database Workspace Memory in Percentage

G2 - MSSQL DB WorkSpace Memory - v2

Description

G2 - MSSQL DB WorkSpace Memory

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - MSSQL DB WorkSpace Memory - v2mssql_db_workspace_memoryMSSQL Database Workspace Memory Percentage%Monitors MSSQL Database Workspace Memory in Percentage

G2 MySQL Database Network Template

Description

G2 MySQL Database Network Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MySQL Database Network Monitormysql.bytes.receivedMySQL Bytes ReceivedBpsThe number of bytes received from all clients.
mysql.bytes.sentMySQL Bytes SentBpsThe number of bytes sent to all clients.

G2 MySQL Database Replication Status

Description

Monitors mysql replication status & slave behind master details along with mysql io/sql service running state details. This is applicable only for mysql slave resource.

Prerequisites

  • It requires either the SUPER or REPLICATION CLIENT privilege.
  • Validated against mysql Server version: 5.7.36-0ubuntu0.18.04.1-log (Ubuntu). Applicable for: Opsramp Gateway v11.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MySQL Database Replication Statusmysql_Replication_StatusMySQL Replication StatusNULLReturns 0 - if slave is not running,1 - if slave is running,2 - if slave NOT configured
mysql_slave_Sql_Running_StatusMySQL Slave SQL Running StatusNULLReturns 0 - if slave SQL is not running,1 - if slave SQL is running,2 - if slave SQL NOT configured
mysql_slave_Seconds_Behind_MasterMySQL Slave behind MastersMySQL Slave behind master in seconds
mysql_slave_IO_Running_StatusMySQL Slave IO Running StatusNULLReturns 0 - if slave IO is not running,1 - if slave IO is running,2 - if slave IO NOT configured
mysql_slave_Sql_Running_StateMySQL Slave SQL Running StateNULLThe Running state of slave SQL service. Returns 1 - if sql state is "Making temporary file (append) before replaying LOAD DATA INFILE",2 - if sql state is "Making temporary file (create) before replaying LOAD DATA INFILE",3 - if sql state is "Reading event from the relay log",4 - if sql state is "Slave has read all relay log; waiting for more updates",5 - if sql state is "Waiting for an event from Coordinator",6 - if sql state is "Waiting for slave mutex on exit",7 - if sql state is "Waiting for Slave Workers to free pending events",8 - if sql state is "Waiting for the next event in relay log",9 - if sql state is "Waiting until MASTER_DELAY seconds after master executed event"
mysql_slave_IO_StateMySQL Slave IO StateNULLInput/output state of slave. Returns 1- if io state is "Checking master version",2 - if io state is "Connecting to master",3 - if io state is "Queueing master event to the relay log",4 - if io state is "Reconnecting after a failed binlog dump request",5 - if io state is "Reconnecting after a failed master event read",6 - if io state is "Registering slave on master",7 - if io state is "Requesting binlog dump",8 - if io state is "Waiting for its turn to commit",9 - if io state is "Waiting for master to send event",10 - if io state is "Waiting for master update",11 - if io state is "Waiting for slave mutex on exit",12 - if io state is "Waiting for the slave SQL thread to free enough relay log space",13 - if io state is "Waiting to reconnect after a failed binlog dump request",14 - if io state is "Waiting to reconnect after a failed master event read".

G2 MySQL Database Table Template

Description

G2 MySQL Database Table Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MySQL Database Table Monitormysq.tmp.table.delta.utilMySL temporary table delta utilizationMySL temporary table delta utilization
mysq.tmp.table.utilMySQL temporary table utilizationMySQL temporary table utilization
mysql.temporary.files.createdMySQL Temporary Files CreatedpsecThe rate of temporary files created by second.
mysql.disk.temporarytables.createdMySQL Disk Temporary Tables CreatedpsecThe rate of temporary tables created by second.
mysql.full.table.scan.delta.utilMySQL full table scan delta utilizationMySQL full table scan delta utilization
mysql.full.table.scan.utilMySQL full table scan utilizationMySQL full table scan utilization
mysq.open.files.utilMySQL Open file utilizationMySQL Open file utilization
mysql.open.filesMySQL Open FilescountThe number of files that have been opened with my_open() (a mysys library function). Parts of the server that open files without using this function do not increment the count
mysql.open.tablesMySQL Open TablescountThe number of tables that have been opened with my_open().
mysql.table.locks_immediateMySQL Table Locks ImmediatecountThe number of times that a request for a table lock could be granted immediately.

G2 MySQL Database Threads Template

Description

G2 MySQL Database Threads Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 MySQL Database Threads Monitormysql.connected.threads.countMySQL Connected Threads countMySQL Connected Threads count
mysql.created.threadsMySQL Created ThreadscountThe number of threads created to handle connections. If Threads_created is big,you may want to increase the thread_cache_size value. The cache miss rate can be calculated as Threads_created/Connections.
mysql.threads.cached.countMySQL Cached Threads countMySQL Cached Threads count
mysql.running.threadsMySQL Running ThreadscountThe number of threads that are not sleeping.
mysql.threads.stacksizeMySQL Threads StacksizeNULLThe stack size for each thread. Many of the limits detected by the crash-me test are dependent on this value.

G2-OracleDB-Alert Log Status

Description

This template supports for Oracle Linux flavor machines and tested in Oracle RAC 19c version.

Prerequisites

  1. Gateway 7.0.0 and above & Add SSH credentials on target device.
  2. Need to provide input parameters like below format:
    <diag trace path 1>::<instance1_sid>,<diag trace path 2>::<instance2_sid>

Single Instance Example:

u01/app/oracle/diag/rdbms/cintbprd/CINTBPRD1/trace/::CINTBPRD1

Multiple Instance Example (separted with comma):

/u01/app/oracle/diag/rdbms/cintbprd/CINTBPRD1/trace/::CINTBPRD1,/u01/app/oracle/diag/rdbms/cintbprd/CINTBPRD2/trace/::CINTBPRD2

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-Alert Log Statusoracle_database_alertLog_readAccessibilityOracle Database Alert Log Read AccessibilityNULLMonitors the alert log read accessibility of given instances. Below are the possible values: 0 - Not Accessible,1 - Accessible
oracle_database_alertLog_availabilityOracle Database Alert Log AvailabilityNULLMonitors the alert log availability of given instance. Below are the possible values: 0 - Not Available,1 - Available
oracle_database_alertLog_writeAccessibilityOracle Database Alert Log Write AccessibilityNULLMonitors the alert log write accessibility of given instances. Below are the possible values: 0 - Not Accessible,1 - Accessible

G2-OracleDB-ARCHIVER

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries,Template is tested on Oracle RAC 19c version (Linux based OS).

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-ARCHIVERoracle_database_flash_recovery_usageOracle Database Flash Recovery UsageMBFlash recovery usage (in MB) of the oracle database
oracle_database_flashback_log_usageOracle Database FlashBack Log Usage%FlashBack Log usage in percent
oracle_database_recoveryDest_sizeOracle Database RecoveryDest SizeMBOracle Database Recovery Destination Size in MB
oracle_database_recoveryDest_used_percentageOracle Database RecoveryDest Used Percentage%Oracle Database Recovery Destination usage in Percent
oracle_database_recoveryDest_used_sizeOracle Database RecoveryDest Used SizeMBOracle Database Recovery Destination Used Size in MB
oracle_database_archiveLogModeOracle Database Archive Log ModeNULLMonitors the archive log mode of the instance. Below are the possible values: 0 - NOARCHIVELOG. 1 - ARCHIVELOG,2 - MANUAL
oracle_database_component_statusOracle Database Component StatusNULLOracle Database DBA Registry Component Status - Below are the possible values: INVALID - 0,VALID - 1,LOADING - 2,LOADED - 3,UPGRADING - 4,UPGRADED - 5,DOWNGRADING - 6,DOWNGRADED - 7,REMOVING - 8,REMOVED - 9

G2-OracleDB-ASM Availability

Description

This template supports both SID and Service name connection types,Integration is done through JDBC and SQL queries and tested in Oracle RAC 19c version.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-ASM Availability Monitororacle_asm_disk_statusOracle ASM Disk StatusNULLOracle ASM Disk Status
oracle_asm_diskgroup_statusOracle ASM DiskGroup StatusNULLOracle ASM DiskGroup Status
oracle_asm_acfs_statusOracle ASM ACFS StatusNULLOracle ASM ACFS Status

G2-OracleDB ASM DiskGroup Space Usage

Description

Monitors Oracle ASM Diskgroup Space Usages

Prerequisites

No Prerequisites

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB ASM DiskGroup Space Usage Monitororacle_database_asm_diskgroup_utilizationoracle_database_asm_diskgroup_utilization%This metric calculates the percentage of disk group space that is currently being used. It helps you monitor the overall utilization of the ASM disk group.

Note: Oracle Database 10g and later versions.
oracle_database_asm_dis kgroup_safelyUsableDiskSpaceoracle_database_asm_diskgroup_safelyUsableDiskSpaceMBThis metric provides the amount of usable disk space in megabytes within the ASM disk group. It represents the space available for storing database files and other data safely.

Note: Oracle Database 11g Release 2 and later versions.
oracle_database_asm_diskgroup_requiredMirrorFreeSpaceoracle_database_asm_diskgroup_requiredMirrorFreeSpaceThis metric indicates the amount of free space in megabytes that is required for maintaining the mirroring or redundancy configuration of the ASM disk group. It helps ensure data redundancy and availability.

Note: Oracle Database 11g Release 2 and later versions.

G2-OracleDB-Database backups

Description

This template supports both SID and Service name connection type Integration is done through JDBC and SQL queries and tested in Oracle RAC 19c version.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-Database backups Monitororacle_database_backup_incrementalOracle Database Incremental Backup DaysAgoDaysOracle Database Incremental Backup DaysAgo
oracle_database_backup_usermanagedOracle Database User Managed Backup DaysAgoDaysOracle Database User Managed Backup DaysAgo
oracle_database_backup_fullOracle Database Full Backup DaysAgoDaysOracle Database Full Backup DaysAgo
oracle_database_backup_archiveOracle Database Archive Backup DaysAgoDaysOracle Database Archive Backup DaysAgo
oracle_database_backup_rmanOracle Database RMAN Backup DaysAgoDaysOracle Database RMAN Backup DaysAgo

G2-OracleDB-Database locking

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries and tested in Oracle RAC 19c version.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-Database locking Monitororacle_database_lockedusers_statusOracle Database Locked Users StatusNULLOracle Database Locked Users Status
oracle_blocking_session_countOracle Blocking Session CountcountOracle Blocking Session Count

G2-OracleDB-Database Monitoring

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries and tested in Oracle RAC 19c version.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-ASM AlertLog Monitororacle_asm_alertlog_sizeOracle ASM AlertLog SizeMBThis metric monitors the disk used space (in MB) by ASM alert log
G2-OracleDB-Custom Monitororacle_database_blockCorruption_countOracle Database Block Corruption CountcountMonitors the count of block corruption in Oracle DB
oracle_database_blockCorruption_typeOracle Database Block Corruption TypeNULLMonitor the type of block corruption in Oracle DB
oracle_database_archfile_usageOracle Database ArchFile UsageMBThis metric monitors the size (in MB) of each Arch file
oracle_database_restorePoint_GuaranteeFlashback_StatusOracle Database Restore Point Guarantee Flashback StatusNULLMonitors the Oracle DB backup restore point Guarantee Flashback DB Status. Below are the possible values - YES - 1,NO - 0
oracle_database_indexLogging_countOracle Database Index Logging CountcountMonitors the count of Index logging in Oracle DB
oracle_database_archivegap_detectionOracle Database Archive Gap DetectionNULLThis metric monitors the Archive GAP detection
oracle_database_undoUnexpired_countOracle Database Undo Unexpired CountcountMonitors the count of Undo Unexpired in Oracle DB
oracle_database_locked_critical_usersOracle Database Locked Critical UsersNULLThis metric monitors the locked critical users information
oracle_database_datafile_availabilityOracle Database Datafile AvailabilityNULLThis metric monitors the datafile availability - Below are the possible values: 1 - AVAILABLE,2 - INVALID
oracle_database_backup_modeOracle Database Backup ModeNULLThis metric monitors the oracle database backup mode like Active or InActive
oracle_database_archivelog_total_usageOracle Database Archive Log Total UsageGBThis metric monitors the total size (in GB) of Archive log
oracle_asm_diskgroup_typeOracle ASM Disk Group TypeNULLThis metric displays the type of the ASM disk group
oracle_database_invalid_objectsOracle Database Invalid ObjectsNULLThis metric displays invalid objects available or not
oracle_asm_disk_mode_statusOracle ASM Disk Mode StatusNULLThis metric displays global status about which kinds of I/O requests are allowed to the disk
oracle_database_daysSinceLastRestorePointOracle Database Days Since Last Restore PointDaysMonitors the age (In Days) of last successful restore point

G2-OracleDB-Database Resource Usage

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries and tested in Oracle RAC 19c version.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-Database Resource Usage Monitororacle_database_resource_process_limitOracle Database Resource Process LimitcountOracle Database Resource Process Limit
oracle_database_resource_session_limitOracle Database Resource Session LimitcountOracle Database Resource Session Limit

G2-OracleDB-Database Resource Usage - v2

Description

This updated version 2 template added with new process utilization metric.

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries and tested in Oracle RAC 19c version.

Prerequisites

Gateway 7.0.0 and above

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-Database Resource Usage Monitor - v2oracle_database_process_utilizationOracle Database Process Utilization%To monitor Process Utilization of the provided DB Instance.

G2-OracleDB-Database scheduled jobs

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries and tested in Oracle RAC 19c version.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-Database scheduled jobs Monitororacle_database_dbmsjobs_failure_countOracle Database DBMS Jobs Failure CountcountOracle Database DBMS Jobs Failure Count
oracle_database_scheduler_jobs_statusOracle Database Scheduler Jobs StatusNULLOracle Database Scheduler Jobs Status
oracle_database_autotask_job_statusOracle Database AutoTask Job StatusNULLOracle Database AutoTask Job Status

G2-OracleDB-Database Space Usage

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries and tested in Oracle RAC 19c version.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-Database Space Usage Monitororacle_database_required_mirror_freespaceOracle Database Required Mirror Free SpaceMBOracle Database - Including different redundancy requirements (Safely usable data usage)
oracle_asm_diskgroup_utilizationOracle ASM DiskGroup Space Utilization%Oracle ASM DiskGroup Space Utilization
oracle_database_tablespace_usedPercentOracle Database Tablespace Used Percent%Monitor the Oracle table space used percent
oracle_database_safelyusable_diskspaceOracle Database Safely Usable Disk SpaceMBOracle Database - Including safely usable disk space on different redundancy (Safely usable data usage)

G2-OracleDB-DataGuard

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries and tested in Oracle RAC 19c version.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-DG DB Role Change Monitor With DGBoracle_dg_database_role_change_withDGBOracle DataGuard DB Role Change with DataGuard BrokerNULLOracle DataGuard DB Role Change with DataGuard Broker

G2-OracleDB-Listener

Description

This template supports for Oracle Linux flavor machines and tested in Oracle RAC 19c version.

Prerequisites

Gateway 7.0.0 and above & Add SSH credentials on target device (For which user had permissions to execute “lsnrctl services” command)

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-Listener Availability Monitororacle_database_listener_availabilityOracle Database Listener AvailabilityNULLOracle Database Listener Availability
G2-OracleDB-Listener Monitororacle_database_listener_status_with_nodesOracle Database Listener Status With NodesNULLOracle Database Listener Status With Nodes
oracle_database_all_listener_statusOracle Database All Listener StatusNULLOracle Database All Listener Status
oracle_database_scan_listener_statusOracle Database Scan Listener StatusNULLOracle Database Scan Listener Status
oracle_database_local_listener_statusOracle Database Local Listener StatusNULLOracle Database Local Listener Status
G2-OracleDB-Listener Service Monitororacle_database_listener_service_statusOracle Database Listener Service StatusNULLOracle Database Listener Service Status

G2-OracleDB-Listener SID Availability

Description

This template supports for Oracle Linux flavor machines and tested in Oracle RAC 19c version. This template Only works for CDB SID’s

Prerequisites

  1. Gateway 7.0.0 and above & Add SSH credentials on target device.
  2. Need to provide input parameters like below format.syntax:,,,...etc example:Instance1,Instance2.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-Listener SID Availability Monitororacle_database_listenerSID_availabilityOracle Database Listener SID AvailabilityMonitors the oracle database listener SID availability status: Below are the possible values - 1 - Available,0 - Unavailable

G2-OracleDB-Monitored License Used Status

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries and tested in Oracle RAC 19c version.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-Monitored License Used Statusoracle_database_monitoredLicense_UsedstatusOracle Database Monitored License Used StatusNULLIt provides oracle monitored license list with currently used status. Below are the possible values - TRUE: 0 FALSE: 1

G2-OracleDB-Oracle Library Stats

Description

G2-OracleDB-Oracle Library Stats

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle Library statsoracle.library.cache.getsOracle Library Cache GetsValidates the Number of Library Cache gets by database.
oracle.library.cachereloadsLibrary Cache ReloadsNULLValidates the Number of Library Cache Reloads by database.
oracle.cache.invalidationsOracle Cache InvalidationsValidates the how many Cache invalidations on particular database.

G2-OracleDB-Oracle Library Stats - v2.0

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle Library stats - v2.0oracle.library.cache.getsOracle Library Cache GetsValidates the Number of Library Cache gets by database.
oracle.library.cachereloadsLibrary Cache ReloadsNULLValidates the Number of Library Cache Reloads by database.
oracle.cache.invalidationsOracle Cache InvalidationsValidates the how many Cache invalidations on particular database.

G2-OracleDB-Oracle Memory

Description

G2-OracleDB-Oracle Memory

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle SGA statsoracle.shared.pool.freeShared Pool FreeMBIt monitors the free shared pool memory in MB.
oracle.java.pool.freeJava Pool FreeMBIt monitors the free java pool memory in MB.
oracle.large.pool.freeLarge Pool FreeMBIt monitors the free large pool memory in MB.

G2-OracleDB-Oracle Memory - v2.0

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle SGA stats - v2.0oracle.shared.pool.freeShared Pool FreeMBIt monitors the free shared pool memory in MB.
oracle.java.pool.freeJava Pool FreeMBIt monitors the free java pool memory in MB.
oracle.large.pool.freeLarge Pool FreeMBIt monitors the free large pool memory in MB.

G2-OracleDB-Password Security

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries,Template is tested on Oracle RAC 19c version (Linux based OS).

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-OracleDB-Password Securityoracle_database_users_default_passwordoracle_database_users_default_passwordcountMonitors the count of users which are using default password
oracle_database_password_expiry_DaysOracle Database Password Expiry DaysDaysMonitors the users password expiry in days

G2-OracleDB-Performance

Description

G2-OracleDB-Performance

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
OracleDB Performanceoracle.invalid.objectsInvalid ObjectscountChecks for invalid objects in database.
oracle.failed.logon.countFailed Logon CountcountIt monitors the failed logon attempts of the current user.
oracle.blocking.lock.queriesOracle Blocking Lock QueriescountValidates the how many block lock queries?on particular database.
oracle.long.running.queriesOracle Long Running QueriescountValidates the how many long running queries?on particular database.

G2-OracleDB-Performance - v2.0

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
OracleDB Performance - v2.0oracle.invalid.objectsInvalid ObjectscountChecks for invalid objects in database.
oracle.failed.logon.countFailed Logon CountcountIt monitors the failed logon attempts of the current user.
oracle.blocking.lock.queriesOracle Blocking Lock QueriescountValidates the how many block lock queries?on particular database.
oracle.long.running.queriesOracle Long Running QueriescountValidates the how many long running queries?on particular database.

G2-OracleDB-Sessions

Description

G2-OracleDB-Sessions

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle Sessionsoracle.session.cpu_usedSession Cpu UsedsIt monitors the session cpu usage in seconds.
oracle.active.sessionsActive SessionscountIt monitors the active sessions
oracle.inactive.sessionsInactive SessionscountIt monitors the inactive sessions
oracle.session.limit.usageSession Limit Usage%It monitors the sessions utilization.
oracle.session.waitsSession WaitssIt monitors the session waits

G2-OracleDB-Sessions - v2.0

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle Sessions - v2.0oracle.session.cpu_usedSession Cpu UsedsIt monitors the session cpu usage in seconds.
oracle.active.sessionsActive SessionscountIt monitors the active sessions
oracle.inactive.sessionsInactive SessionscountIt monitors the inactive sessions
oracle.session.limit.usageSession Limit Usage%It monitors the sessions utilization.
oracle.session.waitsSession WaitssIt monitors the session waits

G2-OracleDB-Sessions - v3.0

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle Sessions - v3.0oracle.active.sessionsActive SessionscountIt monitors the active sessions
oracle.session.limit.usageSession Limit Usage%It monitors the sessions utilization.
oracle.inactive.sessionsInactive SessionscountIt monitors the inactive sessions
oracle_system_waits_perClassOracle System Waits PerClasssTo monitor oracle system class waits (The system-level waits represent a high level summary of all session-level waits). This metric evaluated using this formula avg of waits = sum(time_waited)/sum(total_waits)
oracle_session_waits_perEventOracle Session Waits PerEventsIt monitors sum of "session waits" per each event and class. (event for which sessions have just completed waiting or are currently waiting)

G2-OracleDB-System Stats

Description

G2-OracleDB-System Stats

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle System Statsoracle.user.commitsUser CommitspsecThis metric represents the number of user commits performed per second in last two monitoring polls.
oracle.redo.log.space.requestsRedo Log Space RequestsReq per SecIt represents the active log file is full and Oracle is waiting for disk space to be allocated for the redo log entries.
oracle.user.rollbacks.persecUser RollbackspsecThis metric represents the number of times,per second,that users manually issue the ROLLBACK statement or an error occurred during a user's transactions.
oracle.cache.blocks.lostCache Blocks LostcountThis metric represents the number of global cache blocks lost over the user-defined observation period.
oracle.table.scan.blocks.persecTable Scan BlockspsecNumber of blocks received via table scans.
oracle.io.wait.timeIO Wait TimemsHow much time the application was blocked,waiting for all I/O operation to complete
oracle.logons.per.secLogons Per SeccountThis metric represents the number of logons per second during the sample period.
oracle.db.instance.uptimeDB Instance UptimeDaysIt represents db instance uptime since start up.
oracle.check.db.aliveCheck Db AliveNULLMonitors connectivity to the database instance.

G2-OracleDB-System Stats - v2.0

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle System Stats - v2.0oracle.user.commitsUser CommitspsecThis metric represents the number of user commits performed per second in last two monitoring polls.
oracle.redo.log.space.requestsRedo Log Space RequestsReq per SecIt represents the active log file is full and Oracle is waiting for disk space to be allocated for the redo log entries.
oracle.user.rollbacks.persecUser RollbackspsecThis metric represents the number of times,per second,that users manually issue the ROLLBACK statement or an error occurred during a user's transactions.
oracle.cache.blocks.lostCache Blocks LostcountThis metric represents the number of global cache blocks lost over the user-defined observation period.
oracle.table.scan.blocks.persecTable Scan BlockspsecNumber of blocks received via table scans.
oracle.io.wait.timeIO Wait TimemsHow much time the application was blocked,waiting for all I/O operation to complete
oracle.logons.per.secLogons Per SeccountThis metric represents the number of logons per second during the sample period.
oracle.db.instance.uptimeDB Instance UptimeDaysIt represents db instance uptime since start up.
oracle.check.db.aliveCheck Db AliveNULLMonitors connectivity to the database instance.

G2-OracleDB-System Stats - v3.0

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle Database System Statisticsoracle_database_gc_blocks_corruptOracle Database Global Cache Blocks CorruptNULLIt monitors the value of the global cache blocks corrupt.
oracle_database_redoLog_contentionOracle Database Redo Log Contention%It monitors the miss ratio for redo log latches. If the ratio of MISSES to GETS exceeds 1% then there is latch contention.
oracle_database_gc_blocks_lostOracle Database Global Cache Blocks LostNULLIt monitors the value of the global cache blocks lost
oracle_database_cacheFusionWritesOracle Database Cache Fusion Writes Ratio%It monitors the ratio of cache fusion writes
oracle_database_avgGlobalLockGetTimeOracle Database Average Global Lock Get TimemsIt monitors the average global lock get time (in milliseconds)
oracle_database_dictionaryCacheHitRatioOracle Database Dictionary Cache Hit Ratio%It monitors the Dictionary cache hit ratio
oracle_database_gc_cr_timeoutsOracle Database Global Cache Consistent Read TimeoutsNULLIt monitors the value of global cache consistent read timeouts. This statistic is available in older oracle versions only.
oracle_database_chainedRowsOracle Database Chained RowscountIt monitors the count of chained rows from all available tables in oracle database
oracle_database_bufferCachehitRatioOracle Database Buffer Cache Hit Ratio%It monitors the buffer cache hit ratio
oracle_database_gc_convert_timeoutsOracle Database Global Cache Convert TimeoutsNULLIt monitors the value of global cache convert timeouts,this statistic is available in older oracle versions only.
oracle_database_gc_service_utilizationOracle Database Global Cache Service Utilization%It monitors the value of global cache service utilization,this statistic is available in older oracle versions only.
oracle_database_memory_sortRatioOracle Database Memory Sort Ratio%It monitors the ratio of memory sorts
oracle_database_unUsable_index_countOracle Database UnUsable Index CountcountIt monitors the count of the unusable indexes in the oracle database.
Oracle Database Users Statisticsoracle_database_overallSizeOracle Database Overall SizeMBIt monitors the oracle database size (in MB) based on data files,temp files,log files and the control files
oracle_database_activeUsersOracle Database Active UserscountIt monitors the count of oracle active users
oracle_database_resource_utilizationOracle Database Resource Utilization%It monitors the resource utilization for the resources :Processes,Sessions and Transactions
oracle_database_activeConnectionRatioOracle Database Active Connection Ratio%It monitors the ratio of oracle active connections
oracle_database_concurrentUsersOracle Database Concurrent UserscountIt monitors the count of concurrent users
oracle_database_pga_memory_usageOracle Database PGA Memory UsageBytesIt monitors the PGA memory usage (in Bytes) of the each oracle user
oracle_database_size_withDataAndLogFilesOracle Database Size With Data And Log FilesMBIt monitors the oracle database size (in MB) based on log and data files.
oracle_database_locked_users_countOracle Database Locked Users CountcountIt monitors the number of users suspended by locks within a timeout
Oracle System Stats - v3.0oracle.table.scan.blocks.persecTable Scan BlockspsecNumber of blocks received via table scans.
oracle.user.commitsUser CommitspsecThis metric represents the number of user commits performed per second in last two monitoring polls.
oracle.logons.per.secLogons Per SeccountThis metric represents the number of logons per second during the sample period.
oracle.cache.blocks.lostCache Blocks LostcountThis metric represents the number of global cache blocks lost over the user-defined observation period.
oracle.user.rollbacks.persecUser RollbackspsecThis metric represents the number of times,per second,that users manually issue the ROLLBACK statement or an error occurred during a user's transactions.
oracle.io.wait.timeIO Wait TimemsHow much time the application was blocked,waiting for all I/O operation to complete
oracle.check.db.aliveCheck Db AliveNULLMonitors connectivity to the database instance.
oracle.db.instance.uptimeDB Instance UptimeDaysIt represents db instance uptime since start up.
oracle.redo.log.space.requestsRedo Log Space RequestsReq per SecIt represents the active log file is full and Oracle is waiting for disk space to be allocated for the redo log entries.

G2-OracleDB-System Summary

Description

G2-OracleDB-System Summary

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle System Summaryoracle.cpu.usage.per.secCPU Usage Per SecNULLThis metric represents the CPU usage per second by the database processes,measured in hundredths of a second.
oracle.cpu.usage.per.txnCPU Usage Per TxnNULLThe amount of CPU usage per transaction for the specific task or session.
oracle.database.cpu.time.ratioDatabase CPU Time RatioNULLThe Database CPU Time Ratio is of limited value as a tuning tool.The Database CPU Time Ratio is computed by dividing the amount of CPU used in the database by the amount of total database time. Total database time is the time spent by the database on user-level calls .
oracle.executions.per.txnExecutions Per TxnNULLThe average amount of time per execution
oracle.executions.per.secExecutions Per SecNULLThe average transactions per second
oracle.sql.service.response.timeSql Service Response TimemsSQL Response Time is the average elapsed time per execution of a representative set of SQL statements,relative to a baseline.
oracle.user.transaction.per.secmUser Transaction Per SecNULLThe User Commits Per Sec Oracle metric data item represents the number of user commits performed,per second during the sample period.
oracle.response.time.per.txnResponse Time Per TxnNULLThe Response Time Per Txn Oracle metric is using only statistics available within the database,this data item gives the best approximation of response time,in seconds,per transaction during this sample period.
oracle.database.wait.time.ratioDatabase Wait Time RatioNULLIt monitors database wait time ratio.

G2-OracleDB-System Summary - v2.0

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle System Summaryoracle.cpu.usage.per.secCPU Usage Per SecNULLThis metric represents the CPU usage per second by the database processes,measured in hundredths of a second.
oracle.cpu.usage.per.txnCPU Usage Per TxnNULLThe amount of CPU usage per transaction for the specific task or session.
oracle.database.cpu.time.ratioDatabase CPU Time RatioNULLThe Database CPU Time Ratio is of limited value as a tuning tool.The Database CPU Time Ratio is computed by dividing the amount of CPU used in the database by the amount of total database time. Total database time is the time spent by the database on user-level calls .
oracle.executions.per.txnExecutions Per TxnNULLThe average amount of time per execution
oracle.executions.per.secExecutions Per SecNULLThe average transactions per second
oracle.sql.service.response.timeSql Service Response TimemsSQL Response Time is the average elapsed time per execution of a representative set of SQL statements,relative to a baseline.
oracle.user.transaction.per.secmUser Transaction Per SecNULLThe User Commits Per Sec Oracle metric data item represents the number of user commits performed,per second during the sample period.
oracle.response.time.per.txnResponse Time Per TxnNULLThe Response Time Per Txn Oracle metric is using only statistics available within the database,this data item gives the best approximation of response time,in seconds,per transaction during this sample period.
oracle.database.wait.time.ratioDatabase Wait Time RatioNULLIt monitors database wait time ratio.

G2-OracleDB-Table Space

Description

G2-OracleDB-Table Space

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle Table Spaceoracle.table.space.utilTable Space Utilization%It monitors the table space utilization
oracle.table.space.usedTable Space UsedMbIt monitors the table space used.
oracle.temp.table.space.freeTemp Table Space FreeMbIt monitors temporary table space free
oracle.temp.table.space.usedTemp Table Space UsedMbIt monitors temporary table space used
oracle.temp.table.space.utilTemp Table Space Utilization%It monitors temporary table space utilization
oracle.table.space.freeOracle Table Space FreeMBValidates the Size allocated for the table by database.

G2-OracleDB-Table Space - v2.0

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle Table Space - v2.0oracle.table.space.utilTable Space Utilization%It monitors the table space utilization
oracle.table.space.usedTable Space UsedMbIt monitors the table space used.
oracle.temp.table.space.freeTemp Table Space FreeMbIt monitors temporary table space free
oracle.temp.table.space.usedTemp Table Space UsedMbIt monitors temporary table space used
oracle.temp.table.space.utilTemp Table Space Utilization%It monitors temporary table space utilization
oracle.table.space.freeOracle Table Space FreeMBValidates the Size allocated for the table by database.

G2-OracleDB-Table Space - v3.0

Description

This template supports both SID and Service name connection types Integration is done through JDBC and SQL queries.

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Oracle Database Tablespace Monitororacle_database_tablespace_statusOracle Database Tablespace StatusNULLIt monitors the status of the each tablespace in oracle. Below are the possible values: ONLINE,OFFLINE,READ ONLY
oracle_database_remaining_extentsOracle Database Remaining ExtentscountOracle Database Remaining Extents
oracle_database_rollbackSegmentsOracle Database Rollback SegmentscountIt monitors the value of a sufficient number of rollback segments.
oracle_database_tablespace_sizeOracle Database Tablespace SizeMBThis metric monitors the size (in MB) for each available TABLESPACES
oracle_database_tablespace_deficit_statusOracle Database Tablespace Deficit StatusNULLIt monitors the deficit status of the each tablespace in oracle. Below are the possible values,0 - Tablespace has deficit (i.e. available space < next extent),1 - Tablespace has no deficit (i.e. available space > next extent)"
oracle_database_tablespace_freeSpaceOracle Database Tablespace FreeSpace%It monitors the free space utilization of the each tablespace in oracle.
oracle_database_tablespace_temp_freeOracle Database Tablespace Temp FreeBytesIt monitors the free space (in Bytes) of the temp tablespace
oracle_database_no_next_extentsOracle Database No Next ExtentscountIt monitors the count of database segments which are having no next extent
Oracle Table Space - v3.0oracle.table.space.utilTable Space Utilization%It monitors the table space utilization
oracle.table.space.usedTable Space UsedMbIt monitors the table space used.
oracle.temp.table.space.freeTemp Table Space FreeMbIt monitors temporary table space free
oracle.temp.table.space.usedTemp Table Space UsedMbIt monitors temporary table space used
oracle.temp.table.space.utilTemp Table Space Utilization%It monitors temporary table space utilization
oracle.table.space.freeOracle Table Space FreeMBValidates the Size allocated for the table by database.

G2 PostgreSQL Activity Long Transactions Template-MultiInstance

Description

G2 PostgreSQL Activity Long Transactions Template-MultiInstance

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Activity Long Transactions Monitor-MultiInstancepostgresql.activity.long.transactionsPostgreSQL Activity Long TransactionshMonitors PostgreSQL activity long transactions in hours.

G2 PostgreSQL Database Blockhits Template

Description

G2 PostgreSQL Database Blockhits Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Advanced Cloud PostgreSQL Database BlockHits Monitorpostgresql.statiotables.toastblkshitPostgresql Statio Tables Toast Blks HitNULLNumber of buffer hits in this table's TOAST table (if any).
postgresql.statiotables.idxblkshitPostgresql Statio Tables Idx Blks HitcountNumber of buffer hits in all indexes on this table.
postgresql.database.blkshitPostgresql Database Blocks HitsNULLNumber of times disk blocks were found already in the buffer cache,so that a read was not necessary (this only includes hits in the PostgreSQL buffer cache,not the operating system's file system cache).
postgresql.statioindexes.bufferhitsPostgresql Statio Indexes Buffer HitsNULLNumber of buffer hits in this index.

G2 PostgreSQL Database Blockhits Template-MultiInstance

Description

Monitors Postgres DB agent metrics like postgresql.statiotables.toastblkshit,postgresql.statiotables.idxblkshit…..

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Advanced Cloud PostgreSQL Database BlockHits Monitor-MultiInstancepostgresql.statiotables.toastblkshitPostgresql Statio Tables Toast Blks HitNULLNumber of buffer hits in this table's TOAST table (if any).
postgresql.statiotables.idxblkshitPostgresql Statio Tables Idx Blks HitcountNumber of buffer hits in all indexes on this table.
postgresql.database.blkshitPostgresql Database Blocks HitsNULLNumber of times disk blocks were found already in the buffer cache,so that a read was not necessary (this only includes hits in the PostgreSQL buffer cache,not the operating system's file system cache).
postgresql.statioindexes.bufferhitsPostgresql Statio Indexes Buffer HitsNULLNumber of buffer hits in this index.

G2 PostgreSQL Database Blockhits Template-MultiInstance - v2

Description

Monitors Postgres DB agent metrics like postgresql.statiotables.toastblkshit,postgresql.statiotables.idxblkshit…..

Prerequisites

NULL

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Advanced Cloud PostgreSQL Database BlockHits Monitor-MultiInstance - v2postgresql.statiotables.toastblkshitPostgresql Statio Tables Toast Blks HitNULLNumber of buffer hits in this table's TOAST table (if any).
postgresql.statiotables.idxblkshitPostgresql Statio Tables Idx Blks HitcountNumber of buffer hits in all indexes on this table.
postgresql.database.blkshitPostgresql Database Blocks HitsNULLNumber of times disk blocks were found already in the buffer cache,so that a read was not necessary (this only includes hits in the PostgreSQL buffer cache,not the operating system's file system cache).
postgresql.statioindexes.bufferhitsPostgresql Statio Indexes Buffer HitsNULLNumber of buffer hits in this index.

G2 PostgreSQL Database Connection Statistics Template

Description

G2 PostgreSQL Database Connection Statistics Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Connection Statistics Monitorpostgresql.database.connectionsPostgresql Database ConnectionsNULLThe number of active connections to postgres database.
postgresql.settings.connectionPostgresql Settings ConnectionsNULLThe number of connections to this database as a fraction of the maximum number of allowed connections.
postgresql.user_tables.rows_countPostgresql User Tables Rows Countcountnumber of rows scans
postgresql.max_connectionsPostgresql Max ConnectionsNULLThe maximum number of client connections allowed to this database.shown as connection
postgresql.user.table.countUser Table CountNULLIt monitors the number of user tables in current database.

G2 PostgreSQL Database Connection Statistics Template-MultiInstance

Description

Monitors Postgres DB agent metrics like postgresql.database.connections,postgresql.settings.connection

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Connection Statistics Monitor-MultiInstancepostgresql.database.connectionsPostgresql Database ConnectionsNULLThe number of active connections to postgres database.
postgresql.settings.connectionPostgresql Settings ConnectionsNULLThe number of connections to this database as a fraction of the maximum number of allowed connections.
postgresql.user_tables.rows_countPostgresql User Tables Rows Countcountnumber of rows scans
postgresql.max_connectionsPostgresql Max ConnectionsNULLThe maximum number of client connections allowed to this database.shown as connection
postgresql.user.table.countUser Table CountNULLIt monitors the number of user tables in current database.

G2 PostgreSQL Database Connection Statistics Template-MultiInstance - v2

Description

Monitors Postgres DB agent metrics like postgresql.database.connections,postgresql.settings.connection

Prerequisites

NULL

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Connection Statistics Monitor-MultiInstance - v2postgresql.database.connectionsPostgresql Database ConnectionsNULLThe number of active connections to postgres database.
postgresql.settings.connectionPostgresql Settings ConnectionsNULLThe number of connections to this database as a fraction of the maximum number of allowed connections.
postgresql.user_tables.rows_countPostgresql User Tables Rows Countcountnumber of rows scans
postgresql.max_connectionsPostgresql Max ConnectionsNULLThe maximum number of client connections allowed to this database.shown as connection
postgresql.user.table.countUser Table CountNULLIt monitors the number of user tables in current database.

G2 PostgreSQL Database CPU Utilization Template

Description

G2 PostgreSQL Database CPU Utilization Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Cpu Utilization Monitorpostgresql.activity.long_transactionsPostgresql Activity Long TransactionshLong-running transactions are bad because they prevent Postgres from vacuuming old data. This causes database bloat and,in extreme circumstances,shutdown due to transaction ID (xid) wraparound. Transactions should be kept as short as possible,ideally less than a minute.

G2 PostgreSQL Database Deadlocks Template

Description

G2 PostgreSQL Database Deadlocks Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Deadlocks Monitorpostgresql.database.deadlocksPostgresql Database DeadlockscountNumber of deadlocks detected in this database
postgresql.database.conflict.deadlocksPostgresql Database Conflict DeadlockscountNumber of conflicts in this database that have been canceled due to deadlocks

G2 PostgreSQL Database Deadlocks Template-MultiInstance

Description

Monitors Postgres DB agent metrics like postgresql.database.deadlocks,postgresql.database.conflict.deadlocks

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Deadlocks Monitor-MultiInstancepostgresql.database.deadlocksPostgresql Database DeadlockscountNumber of deadlocks detected in this database
postgresql.database.conflict.deadlocksPostgresql Database Conflict DeadlockscountNumber of conflicts in this database that have been canceled due to deadlocks

G2 PostgreSQL Database Deadlocks Template-MultiInstance - v2

Description

Monitors Postgres DB agent metrics like postgresql.database.deadlocks,postgresql.database.conflict.deadlocks

Prerequisites

NULL

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Deadlocks Monitor-MultiInstance - v2postgresql.database.deadlocksPostgresql Database DeadlockscountNumber of deadlocks detected in this database
postgresql.database.conflict.deadlocksPostgresql Database Conflict DeadlockscountNumber of conflicts in this database that have been canceled due to deadlocks

G2 PostgreSQL Database Disk Usage Template

Description

G2 PostgreSQL Database Disk Usage Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-PostgresqlDB-Disk-Usage-Monitorpostgresql.class.relpagesPostgresql Class RelpagescountThis query is used to display the tables and their respective indexes in descending order of relpages.

G2 PostgreSQL Database Disk Usage Template-MultiInstance

Description

Monitors Postgres DB agent metrics like postgresql.class.relpages

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Disk Usage Monitor-MultiInstancepostgresql.class.relpagesPostgresql Class RelpagescountThis query is used to display the tables and their respective indexes in descending order of relpages.

G2 PostgreSQL Database Disk Usage Template-MultiInstance - v2

Description

Monitors Postgres DB agent metrics like postgresql.class.relpages

Prerequisites

NULL

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Disk Usage Monitor-MultiInstance - v2postgresql.class.relpagesPostgresql Class RelpagescountThis query is used to display the tables and their respective indexes in descending order of relpages.

G2 PostgreSQL Database IO Template

Description

G2 PostgreSQL Database IO Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database IO Monitorpostgresql.statio_tables.buffer_hitsPostgresql Statio Tables Buffer HitshpsNumber of buffer hits in this table.
postgresql.statio_tables.index_block_readPostgresql Statio Tables Index Block ReadNULLNumber of disk blocks read from all indexes on this table.
postgresql.statio_tables.index_buffer_hitPostgresql Statio Tables Index Buffer HitshpsNumber of buffer hits in all indexes on this table.

G2 PostgreSQL Database IO Template-MultiInstance

Description

Monitors Postgres DB agent metrics like postgresql.statio_tables.buffer_hits

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database IO Monitor-MultiInstancepostgresql.statio_tables.buffer_hitsPostgresql Statio Tables Buffer HitshpsNumber of buffer hits in this table.
postgresql.statio_tables.index_block_readPostgresql Statio Tables Index Block ReadNULLNumber of disk blocks read from all indexes on this table.
postgresql.statio_tables.index_buffer_hitPostgresql Statio Tables Index Buffer HitshpsNumber of buffer hits in all indexes on this table.

G2 PostgreSQL Database IO Template-MultiInstance - v2

Description

Monitors Postgres DB agent metrics like postgresql.statio_tables.buffer_hits

Prerequisites

NULL

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database IO Monitor-MultiInstance - v2postgresql.statio_tables.buffer_hitsPostgresql Statio Tables Buffer HitshpsNumber of buffer hits in this table.
postgresql.statio_tables.index_block_readPostgresql Statio Tables Index Block ReadNULLNumber of disk blocks read from all indexes on this table.
postgresql.statio_tables.index_buffer_hitPostgresql Statio Tables Index Buffer HitshpsNumber of buffer hits in all indexes on this table.

G2 PostgreSQL Database Locks Template

Description

G2 PostgreSQL Database Locks Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Locks Monitorpostgresql.usertable.rowsdeadPostgresql User Table Rows DeadNULLThis query gives the number of dead rows (tuples) in the table.
postgresql.database.deadlocksPostgresql Database DeadlockscountNumber of deadlocks detected in this database2.
postgresql.locks.grantedPostgresql Locks GrantedNULLTrue if lock is held,false if lock is awaited.

G2 PostgreSQL Database Locks Template-MultiInstance

Description

Monitors Postgres DB agent metrics like postgresql.usertable.rowsdead,postgresql.database.deadlocks,postgresql.locks.granted

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Locks Monitor-MultiInstancepostgresql.usertable.rowsdeadPostgresql User Table Rows DeadNULLThis query gives the number of dead rows (tuples) in the table.
postgresql.database.deadlocksPostgresql Database DeadlockscountNumber of deadlocks detected in this database2.
postgresql.locks.grantedPostgresql Locks GrantedNULLTrue if lock is held,false if lock is awaited.

G2 PostgreSQL Database Locks Template-MultiInstance - v2

Description

Monitors Postgres DB agent metrics like postgresql.usertable.rowsdead,postgresql.database.deadlocks,postgresql.locks.granted

Prerequisites

NULL

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Locks Monitor-MultiInstance - v2postgresql.usertable.rowsdeadPostgresql User Table Rows DeadNULLThis query gives the number of dead rows (tuples) in the table.
postgresql.database.deadlocksPostgresql Database DeadlockscountNumber of deadlocks detected in this database2.
postgresql.locks.grantedPostgresql Locks GrantedNULLTrue if lock is held,false if lock is awaited.

G2 PostgreSQL Database Memory Template

Description

G2 PostgreSQL Database Memory Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Memory Monitorpostgresql.database.sizePostgresql Database SizeGBThis helps is know the size of the database.

G2 PostgreSQL Database Memory Template-MultiInstance

Description

Monitors Postgres DB agent metrics like postgresql.database.size

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Memory Monitor-MultiInstancepostgresql.database.sizePostgresql Database SizeGBThis helps is know the size of the database.

G2 PostgreSQL Database Memory Template-MultiInstance - v2

Description

Monitors Postgres DB agent metrics like postgresql.database.size

Prerequisites

NULL

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Memory Monitor-MultiInstancepostgresql.database.sizePostgresql Database SizeGBThis helps is know the size of the database.

G2 PostgreSQL Database Performance Template

Description

G2 PostgreSQL Database Performance Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Performance Monitorpostgresql.database.temp_bytesPostgresql Database Temporary BytesNULLTotal amount of data written to temporary files by queries in this database. All temporary files are counted,regardless of why the temporary file was created,and regardless of the log_temp_files setting.
postgresql.database.rows_fetchedPostgresql Database Rows FetchedNULLNumber of rows fetched by queries in this database.
postgresql.database.rows_returnedPostgresql Database Rows ReturnedNULLNumber of rows returned by queries in this database.
postgresql.database.rows_updatedPostgresql Database Rows UpdatedNULLNumber of rows updated by queries in this database.
postgresql.database.rows_deletedPostgresql Database Rows DeletedNULLNumber of rows deleted by queries in this database.
postgresql.database.rows_insertedPostgresql Database Rows InsertedNULLNumber of rows inserted by queries in this database.
postgresql.stat_tables.seq_tup_readPostgresql Tables Row Sequential ScanNULLNumber of live rows fetched by sequential scans.
postgresql.bgwriter.buffers_checkpointPostgresql Bgwriter Buffers CheckpointNULLNumber of buffers written during checkpoints.
postgresql.bgwriter.buffers_cleanPostgresql Bgwriter Buffers CleanNULLNumber of buffers written by the background writer.
postgresql.bgwriter.buffers_backendPostgresql Bgwriter Buffers BackendNULLNumber of buffers written directly by a backend
postgresql.bgwriter.checkpoints_timedPostgresql Bgwriter Checkpoints TimedNULLNumber of scheduled checkpoints that have been performed
postgresql.bgwriter.checkpoints_reqPostgresql Bgwriter Checkpoints TimedNULLNumber of scheduled checkpoints that have been performed

G2 PostgreSQL Database Performance Template-MultiInstance

Description

Monitors Postgres DB agent metrics like postgresql.database.temp_bytes,postgresql.database.rows_fetched,postgresql.database.rows_returned….

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Performance Monitor-MultiInstancepostgresql.database.temp_bytesPostgresql Database Temporary BytesNULLTotal amount of data written to temporary files by queries in this database. All temporary files are counted,regardless of why the temporary file was created,and regardless of the log_temp_files setting.
postgresql.database.rows_fetchedPostgresql Database Rows FetchedNULLNumber of rows fetched by queries in this database.
postgresql.database.rows_returnedPostgresql Database Rows ReturnedNULLNumber of rows returned by queries in this database.
postgresql.database.rows_updatedPostgresql Database Rows UpdatedNULLNumber of rows updated by queries in this database.
postgresql.database.rows_deletedPostgresql Database Rows DeletedNULLNumber of rows deleted by queries in this database.
postgresql.database.rows_insertedPostgresql Database Rows InsertedNULLNumber of rows inserted by queries in this database.
postgresql.stat_tables.seq_tup_readPostgresql Tables Row Sequential ScanNULLNumber of live rows fetched by sequential scans.
postgresql.bgwriter.buffers_checkpointPostgresql Bgwriter Buffers CheckpointNULLNumber of buffers written during checkpoints.
postgresql.bgwriter.buffers_cleanPostgresql Bgwriter Buffers CleanNULLNumber of buffers written by the background writer.
postgresql.bgwriter.buffers_backendPostgresql Bgwriter Buffers BackendNULLNumber of buffers written directly by a backend
postgresql.bgwriter.checkpoints_timedPostgresql Bgwriter Checkpoints TimedNULLNumber of scheduled checkpoints that have been performed
postgresql.bgwriter.checkpoints_reqPostgresql Bgwriter Checkpoints TimedNULLNumber of scheduled checkpoints that have been performed

G2 PostgreSQL Database Performance Template-MultiInstance - v2

Description

Monitors Postgres DB agent metrics like postgresql.database.temp_bytes,postgresql.database.rows_fetched,postgresql.database.rows_returned….

Prerequisites

NULL

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Performance Monitor-MultiInstance - v2postgresql.database.temp_bytesPostgresql Database Temporary BytesNULLTotal amount of data written to temporary files by queries in this database. All temporary files are counted,regardless of why the temporary file was created,and regardless of the log_temp_files setting.
postgresql.database.rows_fetchedPostgresql Database Rows FetchedNULLNumber of rows fetched by queries in this database.
postgresql.database.rows_returnedPostgresql Database Rows ReturnedNULLNumber of rows returned by queries in this database.
postgresql.database.rows_updatedPostgresql Database Rows UpdatedNULLNumber of rows updated by queries in this database.
postgresql.database.rows_deletedPostgresql Database Rows DeletedNULLNumber of rows deleted by queries in this database.
postgresql.database.rows_insertedPostgresql Database Rows InsertedNULLNumber of rows inserted by queries in this database.
postgresql.stat_tables.seq_tup_readPostgresql Tables Row Sequential ScanNULLNumber of live rows fetched by sequential scans.
postgresql.bgwriter.buffers_checkpointPostgresql Bgwriter Buffers CheckpointNULLNumber of buffers written during checkpoints.
postgresql.bgwriter.buffers_cleanPostgresql Bgwriter Buffers CleanNULLNumber of buffers written by the background writer.
postgresql.bgwriter.buffers_backendPostgresql Bgwriter Buffers BackendNULLNumber of buffers written directly by a backend
postgresql.bgwriter.checkpoints_timedPostgresql Bgwriter Checkpoints TimedNULLNumber of scheduled checkpoints that have been performed
postgresql.bgwriter.checkpoints_reqPostgresql Bgwriter Checkpoints TimedNULLNumber of scheduled checkpoints that have been performed

G2 PostgreSQL Database Session Template

Description

G2 PostgreSQL Database Session Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Session Monitorpostgresql.activity.countPostgresql Activity CountNULLThis will tell you how close you are to hitting your max_connections limit,and show up any clients which are leaking database connections.
postgresql.locks.countPostgresql Locks CountNULLThe number of connections blocked waiting for a lock can be an indicator of a slow transaction with an exclusive lock.

G2 PostgreSQL Database Session Template-MultiInstance

Description

Monitors Postgres DB agent metrics like postgresql.activity.count,postgresql.locks.count

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Session Monitor-MultiInstancepostgresql.activity.countPostgresql Activity CountNULLThis will tell you how close you are to hitting your max_connections limit,and show up any clients which are leaking database connections.
postgresql.locks.countPostgresql Locks CountNULLThe number of connections blocked waiting for a lock can be an indicator of a slow transaction with an exclusive lock.

G2 PostgreSQL Database Session Template-MultiInstance - v2

Description

Monitors Postgres DB agent metrics like postgresql.activity.count,postgresql.locks.count

Prerequisites

NULL

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Session Monitor-MultiInstance - v2postgresql.activity.countPostgresql Activity CountNULLThis will tell you how close you are to hitting your max_connections limit,and show up any clients which are leaking database connections.
postgresql.locks.countPostgresql Locks CountNULLThe number of connections blocked waiting for a lock can be an indicator of a slow transaction with an exclusive lock.

G2 PostgreSQL Database Transactions Rollback Template

Description

G2 PostgreSQL Database Transactions Rollback Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Transactions RolledBack Monitorpostgresql.database.transaction.rollbackPostgresql Database Transactions RolledBackNULLNumber of transactions in this database that have been rolled back.

G2 PostgreSQL Database Transactions Rollback Template-MultiInstance

Description

Monitors Postgres DB agent metrics like postgresql.database.transaction.rollback

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Transactions RollBack Monitor-MultiInstancepostgresql.database.transaction.rollbackPostgresql Database Transactions RolledBackNULLNumber of transactions in this database that have been rolled back.

G2 PostgreSQL Database Transactions Rollback Template-MultiInstance - v2

Description

Monitors Postgres DB agent metrics like postgresql.database.transaction.rollback

Prerequisites

NULL

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Database Transactions RollBack Monitor-MultiInstance - v2postgresql.database.transaction.rollbackPostgresql Database Transactions RolledBackNULLNumber of transactions in this database that have been rolled back.

G2 PostgreSQL Hot Standby Feature Status Template-MultiInstance

Description

G2 PostgreSQL Hot Standby Feature Status Template-MultiInstance

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 PostgreSQL Hot Standby Feature Status Monitor-MultiInstancepostgresql.hot.standby.feature.statusPostgreSQL Hot Standby Feature StatusNULLShow the Hot Standby mode is either on or off. 1 means "on" & 0 means "off"

G2-Cisco-UCS-B-Series-Fabric InterConnects Performance- Global

Description

Monitors the Hardware along with network components like switch card status,switch ether net port and fiber channel port status.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
CISCO UCS Fabric Interconnectorsucs.sys.switch.fanmodule.fan.operstateCISCO UCS Switch Fan operstateNULLCISCO UCS Switch Fan operstate
ucs.sys.switch.switchcard.operstateCISCO UCS SwitchCard operstateNULLCISCO UCS SwitchCard operstate
ucs.sys.switch.psu.operstateCISCO UCS Switch PSU operstateNULLCISCO UCS Switch PSU operstate
ucs.sys.switch.operabilityCISCO UCS Switch operabilityNULLCISCO UCS Switch operability
ucs.sys.switch.fanmodule.fan.voltageCISCO UCS Switch Fan voltageNULLCISCO UCS Switch Fan voltage
ucs.sys.switch.psu.powerCISCO UCS Switch PSU powerNULLCISCO UCS Switch PSU power
ucs.sys.switch.switchcard.powerCISCO UCS SwitchCard powerNULLCISCO UCS SwitchCard power
ucs.sys.switch.switchcard.stateCISCO UCS SwitchCard stateCISCO UCS SwitchCard state

G2-Hitachi VSP Array Group Template

Description

Applicable for devices added through Integration / API => On Array Group.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-Hitachi VSP Array Group Monitorhitachivsp.array.arraygroup.operational-statusArray Group Operational StatusNULLArray Group Operational Status
hitachivsp.array.arraygroup.health-stateArray Group Health StateNULLArray Group Health State

G2-Hitachi VSP Battery Template on Storage Array

Description

Applicable for devices added through Integration / API => On Storage Array

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-Hitachi VSP Battery Monitorhitachivsp.array.battery.operational-statusBattery Operational StatusNULLBattery Operational Status
hitachivsp.array.battery.health-stateBattery Health StateNULLBattery Health State.

G2-Hitachi VSP Disk Template on Storage Array

Description

Applicable for devices added through integration / API => on Storage Array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-Hitachi VSP Disk Monitorhitachivsp.array.disk.operational-statusDisk Operational StatusNULLDisk Operational Status
hitachivsp.array.disk.health-stateDisk Health StateNULLDisk Health State

G2-Hitachi VSP DKC Chassis Template on Storage Array

Description

Applicable for devices added through Integration / API => on Storage Array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-Hitachi VSP DKC Chassis Monitorhitachivsp.array.dkcchassis.operational-statusDKC Chassis Operational StatusNULLDKC Chassis Operational Status
hitachivsp.array.dkcchassis.health-stateDKC Chassis Health StateNULLDKC Chassis Health State

G2-Hitachi VSP DKU Chassis Template on Storage Array

Description

Applicable on devices added through Integration / API => on Storage Array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-Hitachi VSP DKU Chassis Monitorhitachivsp.array.dkuchassis.operational-statusDKU Chassis Operational StatusNULLDKU Chassis Operational Status
hitachivsp.array.dkuchassis.health-stateDKU Chassis Health StateNULLDKU Chassis Health State

G2-Hitachi VSP DP Pool Template

Description

Applicable for devices added through Integration / API => On DP Pool / Thin Pool.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-Hitachi VSP DP Pool Monitorhitachivsp.array.thinpool.operational-statusThin Pool Operational StatusNULLThin Pool Operational Status.
hitachivsp.array.thinpool.health-stateThin Pool Health StateNULLThin Pool Health State.
hitachivsp.array.thinpool.percent-usedThin Pool Utilization%Thin Pool Utilization
hitachivsp.array.thinpool.percent-freeThin Pool Percent Free%Thin Pool Percent Free.
hitachivsp.array.thinpool.space-limitThin Storage Pool Space LimitGBThin Storage Pool Space Limit
hitachivsp.array.thinpool.thinprovision-metadataspaceThin Storage Pool MetaDataSpaceGBThin Storage Pool MetaDataSpace

G2-Hitachi VSP Fan Template on Storage Array

Description

Applicable for devices added through Integration / API => on Storage Array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-Hitachi VSP Fan Monitorhitachivsp.array.fan.operational-statusFan Operational StatusNULLFan Operational Status
hitachivsp.array.fan.health-stateFan Health StateNULLFan Health State

G2-Hitachi VSP FCPort Template on Storage Array

Description

Applicable for devices added through Integration / API => on Storage Array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-Hitachi VSP FC Port Monitorhitachivsp.array.fcport.health-stateFC Port Health StateNULLFC Port Health State
hitachivsp.array.fcport.kbytes-transferredPort Kbytes TransferredKBPort Kbytes Transferred in the sample period
hitachivsp.array.fcport.total-iosPort Total IOscountPort Total IOs in the sample period
hitavhivsp.array.fcport.operational-statusFC Port Operational StatusNULLFC Port Operational Status
hitachivsp.array.fcport.max-speedPort Max SpeedHzPort Max Speed
hitachivsp.array.fcport.speedPort SpeedHzPort Speed

G2-Hitachi VSP Power Supply Template on Storage Array

Description

Applicable for devices added through Integration / API => on Storage Array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-Hitachi VSP Power Supply Monitorhitachivsp.array.powersupply.operational-statusPower Supply Operational StatusNULLPower Supply Operational Status
hitachivsp.array.powersupply.health-statePower Supply Health StateNULLPower Supply Health State

G2-Hitachi VSP Storage Array Template

Description

Applicable for devices added through integration / API => On Storage Array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-Hitachi VSP Storage Array Monitorhitachivsp.array.wbemserver.operational-statusWBEM Server Operational StatusNULLWBEM Server Operational Status
hitachivsp.array.wbemserver.health-stateWBEM Server Health StateNULLWBEM Server Health State
hitachivsp.array.operational-statusStorage System Operational StatusNULLStorage System Operational Status
hitachivsp.array.health-stateStorage System Health StateNULLStorage System Health State
hitachivsp.array.kbytes-transferredArray Kbytes TransferredKBArray Kbytes Transferred in the sample period
hitachivsp.array.total-iosArray Total IOscountArray Total IOs in the sample period

G2-Hitachi VSP Storage Pool Template

Description

Applicable for devices added through Integration / API => On Storage Pool.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-Hitachi VSP Storage Pool Monitorhitachivsp.array.storagepool.operational-statusStorage Pool Operational StatusNULLStorage Pool Operational Status
hitachivsp.array.storagepool.health-stateStorage Pool Health StateNULLStorage Pool Health State

G2-Hitachi VSP Storage Processor Template

Description

Applicable for devices added through Integration / API => On Storage Processor.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-Hitachi VSP Storage Processor Monitorhitachivsp.array.storageprocessor.operational-statusStorage Processor Operational StatusNULLStorage Processor Operational Status
hitachivsp.array.storageprocessor.health-stateStorage Processor Health StateNULLStorage Processor Health State

G2-Hitachi VSP Storage Volume Template

Description

Applicable for devices added through Integration / API => On Storage Volume.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-Hitachi VSP Storage Volume Monitorhitachivsp.array.volume.operational-statusStorage Volume Operational StatusNULLStorage Volume Operational Status
hitachivsp.array.volume.health-stateStorage Volume Health StateNULLStorage Volume Health State
hitachivsp.array.volume.kbytes-transferredVolume Kbytes TransferredKBVolume Kbytes Transferred in the sample period
hitachivsp.array.volume.readhit-iosVolume Read Hit IOscountVolume Read Hit IOs in the sample period
hitachivsp.array.volume.read-iosVolume Read IOscountVolume Read IOs in the sample period
hitachivsp.array.volume.writehit-iosVolume Write Hit IOscountVolume Write Hit IOs in the sample period
hitachivsp.array.volume.write-iosVolume Write IOscountVolume Write IOs in the sample period
hitachivsp.array.volume.total-iosVolume Total IOscountVolume Total IOs in the sample period

G2-MSSQLDB-AlwaysON-Database Replication State

Description

This template supports for both SQL and Windows Authentication. Integration is done through JDBC and MSSQL queries and tested in MSSQL v18.9.1

Prerequisites

Gateway 7.0.0 and above.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2-MSSQLDB-AlwaysON-Database Replication Statemssql_alwayson_database_replicaStateMSSQL Alwayson Database Replica StateNULLIt monitor the MSSQL Always On Database Replica synchronization state along with role description. Below are the possible states: PRIMARY_NOT SYNCHRONIZING - 0 PRIMARY_SYNCHRONIZING - 1 PRIMARY_SYNCHRONIZED - 2 PRIMARY_REVERTING - 3 PRIMARY_INITIALIZING - 4 SECONDARY_NOT SYNCHRONIZING - 5 SECONDARY_SYNCHRONIZING - 6 SECONDARY_SYNCHRONIZED - 7 SECONDARY_REVERTING - 8 SECONDARY_INITIALIZING - 9

G2-Storage-EMC PowerScale-Isilon-Cluster

Description

Template to monitor Dell EMC PowerScale Isilon Cluster parameters like Total Bytes,Used Bytes,Free Bytes,Cluster Health,Node Count,Cluster Offline Nodes,Throughput Rate In,Throughput Rate Out,Interface Input Rate,Interface Output Rate,Cluster CPU User,Cluster CPU Nice,Cluster CPU System,Cluster CPU Interrupt,Cluster CPU Idle Pct [ISILON-MIB :: ifsTotalBytes : 1.3.6.1.4.1.12124.1.3.1.0,ifsUsedBytes : 1.3.6.1.4.1.12124.1.3.2.0,ifsFreeBytes : 1.3.6.1.4.1.12124.1.3.4.0,clusterHealth : 1.3.6.1.4.1.12124.1.1.2.0,nodeCount : 1.3.6.1.4.1.12124.1.1.4.0,offlineNodes : 1.3.6.1.4.1.12124.1.1.7.0,clusterIfsInBitsPerSecond : 1.3.6.1.4.1.12124.1.2.1.2.0,clusterIfsOutBitsPerSecond : 1.3.6.1.4.1.12124.1.2.1.4.0,clusterNetworkInBitsPerSecond : 1.3.6.1.4.1.12124.1.2.2.2.0,clusterNetworkOutBitsPerSecond : 1.3.6.1.4.1.12124.1.2.2.4.0,clusterCPUUser : 1.3.6.1.4.1.12124.1.2.3.1.0,clusterCPUNice : 1.3.6.1.4.1.12124.1.2.3.2.0,clusterCPUSystem : 1.3.6.1.4.1.12124.1.2.3.3.0,clusterCPUInterrupt : 1.3.6.1.4.1.12124.1.2.3.4.0,clusterCPUIdlePct : 1.3.6.1.4.1.12124.1.2.3.5.0]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Dell EMC Isilon Cluster Capacity Statsemc_isilon_cluster_ifsUsedSizeCluster Ifs Used SizeGBProvides the number of bytes used in the /ifs filesystem.[ISILON-MIB :: ifsUsedBytes : 1.3.6.1.4.1.12124.1.3.2.0]
emc_isilon_cluster_IfsUtilizationCluster Ifs Utilization%Provides the utilization of the ifs file system.[ISILON-MIB :: ifsTotalBytes : 1.3.6.1.4.1.12124.1.3.1.0,ifsUsedBytes : 1.3.6.1.4.1.12124.1.3.2.0]
emc_isilon_cluster_IfsTotalSizeCluster Ifs Total SizeGBProvides the total cluster capacity of the /ifs filesystem in bytes.[ISILON-MIB :: ifsTotalBytes : 1.3.6.1.4.1.12124.1.3.1.0]
emc_isilon_cluster_ifsFreeSizeCluster Ifs Free SizeGBProvides the number of bytes free in the /ifs filesystem (includes Virtual Hot Spare).[ISILON-MIB :: ifsFreeBytes : 1.3.6.1.4.1.12124.1.3.4.0]
Dell EMC Isilon Cluster CPU Statisticsemc_isilon_Cluster_ClusterCPUSystemCluster CPU SystemProvides the average amount of CPU (per mil) used by system processes within the last 5 seconds for all CPUs.[ISILON-MIB :: clusterCPUSystem : 1.3.6.1.4.1.12124.1.2.3.3.0]
emc_isilon_Cluster_ClusterCPUInterruptCluster CPU InterruptProvides the average amount of CPU (per mil) used by interrupts processes within the last 5 seconds for all CPUs.[ISILON-MIB :: clusterCPUInterrupt : 1.3.6.1.4.1.12124.1.2.3.4.0]
emc_isilon_Cluster_ClusterCPUNiceCluster CPU NiceProvides the average amount of CPU (per mil) used by nice processes within the last 5 seconds for all CPUs.[ISILON-MIB :: clusterCPUNice : 1.3.6.1.4.1.12124.1.2.3.2.0]
emc_isilon_Cluster_ClusterCPUUserCluster CPU UserProvides the average amount of CPU (per mil) used by user processes within the last 5 seconds for all CPUs.[ISILON-MIB :: clusterCPUUser : 1.3.6.1.4.1.12124.1.2.3.1.0]
emc_isilon_Cluster_ClusterCPUIdlePctCluster CPU Idle PctProvides the average amount of CPU time (per mil) averaged for all nodes averaged for all nodes over the last 5 seconds.
Dell EMC Isilon Cluster Statsemc_isilon_ClusterHealthCluster HealthMonitors the overall health status of the cluster. Possible status values of the node health status are 0- Ok,1- Attention,2- Down,3- Invalid. Alert will be generated when the health status is 2- Down,3- Invalid.[ISILON-MIB :: clusterHealth : 1.3.6.1.4.1.12124.1.1.2.0].
emc_isilon_Cluster_NodeCountCluster Node CountcountMonitors the total number of nodes in the cluster [ISILON-MIB :: nodeCount : 1.3.6.1.4.1.12124.1.1.4.0]
emc_isilon_Cluster_ClusterIfsInBitsPerSecondCluster Ifs Throughput Rate InbpsProviddes the cumulative throughput rate (bits per second) into /ifs [ISILON-MIB :: clusterIfsInBitsPerSecond : 1.3.6.1.4.1.12124.1.2.1.2.0]
emc_isilon_Cluster_ClusterNetworkInBitsPerSecondCluster Network Throughput Rate InbpsProvides the the cumulative input rate (bits per second) for all external interfaces [ISILON-MIB :: clusterNetworkInBitsPerSecond : 1.3.6.1.4.1.12124.1.2.2.2.0]
emc_isilon_Cluster_ClusterNetworkOutBitsPerSecondCluster Network Throughput Rate OutbpsProvides the cumulative output rate (bits per second) for all external interfaces [ISILON-MIB :: clusterNetworkOutBitsPerSecond : 1.3.6.1.4.1.12124.1.2.2.4.0]
emc_isilon_Cluster_clusterIfsOutBitsPerSecondCluster Ifs Throughput Rate OutbpsProvides the cumulative throughput rate (bits per second) out of/ifs [ISILON-MIB :: clusterIfsOutBitsPerSecond : 1.3.6.1.4.1.12124.1.2.1.4.0]
emc_isilon_Cluster_OfflineNodesCluster Offline NodescountProvides a comma-separted list of the logical node numbers of the offline nodes in the cluster.[ISILON-MIB :: offlineNodes : 1.3.6.1.4.1.12124.1.1.7.0]

G2-Storage-EMC PowerScale-Isilon-Hardware

Description

Template to monitor Dell EMC PowerScale Isilon Hardware parameters like Fan Speed,Temparature Sensor Value,Power Sensor Value,License Status [ISILON-MIB :: fanSpeed : 1.3.6.1.4.1.12124.2.53.1.4,tempSensorValue : 1.3.6.1.4.1.12124.2.54.1.4,powerSensorValue : 1.3.6.1.4.1.12124.2.55.1.4,licenseStatus : 1.3.6.1.4.1.12124.1.5.1.1.3].

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Dell EMC Isilon Fanemc_isilon_fan_FanSpeedFan SpeedrpmProvides the current speed of the fan in revolutions per minute.[ISILON-MIB :: fanSpeed : 1.3.6.1.4.1.12124.2.53.1.4]
Dell EMC Isilon License Statusemc_isilon_license_LicenseStatusLicense StatusMonitors the status of the license. It may be licensed,unlicensed,or an evaluation license. Possible status values are - 1 - Expired,-2 - Inactive,0- Activated,1- Evaluation. Alert will be generated when the license status is -1- Expired.[ISILON-MIB :: licenseStatus : 1.3.6.1.4.1.12124.1.5.1.1.3]
Dell EMC Isilon Power Sensoremc_isilon_power_PowerSensorValuePower SensorvMonitors the current reading of the sensor in volts or amps.[ISILON-MIB :: powerSensorValue : 1.3.6.1.4.1.12124.2.55.1.4]
Dell EMC Isilon Temperature Sensoremc_isilon_temparature_TempSensorValueTemparature Sensor ValueCelsiusMonitors the current reading of the temperature sensor in degrees celsius. sensor[ISILON-MIB :: tempSensorValue : 1.3.6.1.4.1.12124.2.54.1.4]

G2-Storage-EMC PowerScale-Isilon-Node

Description

Template to monitor Dell EMC PowerScale Isilon Node parameters likeNode Health,Throughput Rate In,Throughput Rate Out,Interface Input Rate,Interface Output Rate,Node CPU User,Node CPU Nice,Node CPU System,Node CPU Interrupt,Node CPU Idle,Minimum Input Operations,Maximum Input Operations,Average Input Operations,Minimum Output Operations,Maximum Output Operations,Average Output Operations,Minimum Latency,Maximum Latency,Average Latency,Disk Operations,Disk Input Rate,Disk Output Rate,Disk Status,Disk Size.[ISILON-MIB :: nodeHealth : 1.3.6.1.4.1.12124.2.1.2.0,nodeIfsInBitsPerSecond : 1.3.6.1.4.1.12124.2.2.1.2.0,nodeIfsOutBitsPerSecond : 1.3.6.1.4.1.12124.2.2.1.4.0,nodeNetworkInBitsPerSecond : 1.3.6.1.4.1.12124.2.2.2.2.0,nodeNetworkOutBitsPerSecond : 1.3.6.1.4.1.12124.2.2.2.4.0,nodeCPUUser : 1.3.6.1.4.1.12124.2.2.3.1.0,nodeCPUNice : 1.3.6.1.4.1.12124.2.2.3.2.0,nodeCPUSystem : 1.3.6.1.4.1.12124.2.2.3.3.0,nodeCPUInterrupt : 1.3.6.1.4.1.12124.2.2.3.4.0,nodeCPUIdle : 1.3.6.1.4.1.12124.2.2.3.5.0,inMinBytes : 1.3.6.1.4.1.12124.2.2.10.1.4,inMaxBytes : 1.3.6.1.4.1.12124.2.2.10.1.5,inAvgBytes : 1.3.6.1.4.1.12124.2.2.10.1.6,outMinBytes : 1.3.6.1.4.1.12124.2.2.10.1.9,outMaxBytes : 1.3.6.1.4.1.12124.2.2.10.1.10,outAvgBytes : 1.3.6.1.4.1.12124.2.2.10.1.11,latencyMin : 1.3.6.1.4.1.12124.2.2.10.1.14,latencyMax : 1.3.6.1.4.1.12124.2.2.10.1.15,latencyAverage : 1.3.6.1.4.1.12124.2.2.10.1.16,diskPerfOpsPerSecond : 1.3.6.1.4.1.12124.2.2.52.1.3,diskPerfInBitsPerSecond : 1.3.6.1.4.1.12124.2.2.52.1.4,diskPerfOutBitsPerSecond : 1.3.6.1.4.1.12124.2.2.52.1.5,diskStatus : 1.3.6.1.4.1.12124.2.52.1.5,diskSizeBytes : 1.3.6.1.4.1.12124.2.52.1.9].

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Dell EMC Isilon Disk Performanceemc_isilon_disk_DiskPerfInBitsPerSecondDisk Input RatebpsProvides the input rate (bits per second) into this disk.[ISILON-MIB :: diskPerfInBitsPerSecond : 1.3.6.1.4.1.12124.2.2.52.1.4]
emc_isilon_disk_DiskPerfOutBitsPerSecondDisk Output RatebpsProvides the output rate (bits per second) from this disk.[ISILON-MIB :: diskPerfOutBitsPerSecond : 1.3.6.1.4.1.12124.2.2.52.1.5]
emc_isilon_disk_DiskPerfOpsPerSecondDisk OperationspsecProvides the value of number of disk operations per second.[ISILON-MIB :: diskPerfOpsPerSecond : 1.3.6.1.4.1.12124.2.2.52.1.3]
Dell EMC Isilon Disk Statusemc_isilon_disk_DiskSizeBytesDisk SizeGBMonitors the size of the disk in bytes.[ISILON-MIB :: diskSizeBytes : 1.3.6.1.4.1.12124.2.52.1.9]
emc_isilon_disk_DiskStatusDisk StatusMonitors the status of the Disk. Alert will be generated when the status is not Healthy.[ISILON-MIB :: diskStatus : 1.3.6.1.4.1.12124.2.52.1.5]
Dell EMC Isilon Node Statisticsemc_isilon_node_NodeIfsOutBitsPerSecondNode Ifs Throughput Rate OutbpsProvides the throughput rate (bits per second) out of/ifs through this node.[ISILON-MIB :: nodeIfsOutBitsPerSecond : 1.3.6.1.4.1.12124.2.2.1.4.0]
emc_isilon_node_NodeIfsInBitsPerSecondNode Ifs Throughput Rate InbpsProvides the throughput rate (bits per second) into /ifs through this node.[ISILON-MIB :: nodeIfsInBitsPerSecond : 1.3.6.1.4.1.12124.2.2.1.2]
emc_isilon_node_NodeHealthNode HealthMonitors the node health status and gives the details about the basic node type as well. Possible status values of the node health status are 0- Ok,1- Attention,2- Down,3- Invalid. Alert will be generated when the health status is 2- Down,3- Invalid.[ISILON-MIB :: nodeHealth : 1.3.6.1.4.1.12124.2.1.2.0]
emc_isilon_node_NodeNetworkOutBitsPerSecondNode Network Throughput Rate OutbpsProvides the total output rate (bits per second) from the node's external interfaces.[ISILON-MIB :: 1.3.6.1.4.1.12124.2.2.2.4.0]
emc_isilon_node_NodeNetworkInBitsPerSecondNode Network Throughput Rate InbpsProvides the total input rate (bits per second) into the node's external interfaces.[ISILON-MIB :: nodeNetworkInBitsPerSecond : 1.3.6.1.4.1.12124.2.2.2.2.0]
Dell EMC Isilon Node CPU Statisticsemc_isilon_node_NodeCPUUserNode CPU UserProvides the average amount of CPU (per mil) used by user processes within the last 5 seconds for all CPUs.[ISILON-MIB :: nodeCPUUser : 1.3.6.1.4.1.12124.2.2.3.1.0]
emc_isilon_node_NodeCPUSystemNode CPU SystemProvides the average amount of CPU (per mil) used by system processes within the last 5 seconds for all CPUs.[ISILON-MIB :: nodeCPUSystem : 1.3.6.1.4.1.12124.2.2.3.3.0]
emc_isilon_node_NodeCPUIdleNode CPU IdleProvides the average amount of CPU (per mil) used by idle processes within the last 5 seconds for all CPUs.[ISILON-MIB :: nodeCPUIdle : 1.3.6.1.4.1.12124.2.2.3.5.0]
emc_isilon_node_NodeCPUInterruptNode CPU InterruptProvides the average amount of CPU (per mil) used by interrupts processes within the last 5 seconds for all CPUs.[ISILON-MIB :: nodeCPUInterrupt : 1.3.6.1.4.1.12124.2.2.3.4.0]
emc_isilon_node_NodeCPUNiceNode CPU NiceProvides the average amount of CPU (per mil) used by nice processes within the last 5 seconds for all CPUs.[ISILON-MIB :: nodeCPUNice : 1.3.6.1.4.1.12124.2.2.3.2.0]
Dell EMC Node Protocol Statisticsemc_isilon_node_OutMaxBytesMaximum Output SizeBytesMonitors the largest output size in bytes of all operations for the protocol.[ISILON-MIB :: outMaxBytes : 1.3.6.1.4.1.12124.2.2.10.1.10]
emc_isilon_node_OutMinBytesMinimum Output SizeBytesMonitors the smallest output size in bytes of all operations for the protocol.[ISILON-MIB :: outMinBytes : 1.3.6.1.4.1.12124.2.2.10.1.9]
emc_isilon_node_LatencyMinMinimum LatencymicrosecProvides the minimum latency in microseconds for all operations for the protocol.[ISILON-MIB :: latencyMin : 1.3.6.1.4.1.12124.2.2.10.1.14]
emc_isilon_node_OutAvgBytesAverage Output SizeBytesMonitors the average output size in bytes of all operations for the protocol.[ISILON-MIB :: outAvgBytes : 1.3.6.1.4.1.12124.2.2.10.1.11]
emc_isilon_node_latencyAverageAverage LatencymicrosecProvides the average latency in microseconds for all operations for the protocol.[ISILON-MIB :: latencyAverage : 1.3.6.1.4.1.12124.2.2.10.1.16]
emc_isilon_node_LatencyMaxMaximum LatencymicrosecProvides the maximum latency in microseconds for all operations for the protocol.[ISILON-MIB :: latencyMax : 1.3.6.1.4.1.12124.2.2.10.1.15]
emc_isilon_node_InMinBytesMinimum Input SizeBytesProvides the smallest input size in bytes of all operations for the protocol.[ISILON-MIB :: 1.3.6.1.4.1.12124.2.2.10.1.4]
emc_isilon_node_InMaxBytesMaximum Input SizeBytesMonitors the largest input size in bytes of all operations for the protocol.[ISILON-MIB :: inMaxBytes : 1.3.6.1.4.1.12124.2.2.10.1.5]
emc_isilon_node_InAvgBytesAverage Input SizeBytesMonitors the average input size in bytes for all operations for the protocol.[ISILON-MIB :: inAvgBytes : 1.3.6.1.4.1.12124.2.2.10.1.6]

G2-Storage-EMC-Xtremio Cluster Array

Description

G2-Storage-EMC-Xtremio Cluster Array

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
EMC Xtremio Cluster Monitorxtremio.array.cluster.overall-efficiencyCluster Overall EfficiencyCluster Overall Efficiency
xtremio.array.cluster.sys-health-stateCluster Health StateCluster Health State
xtremio.array.cluster.sys-stateCluster StateCluster State
xtremio.array.cluster.sys-mgr-conn-stateCluster Connection StateCluster Connection State
xtremio.array.cluster.data-reduction-ratioCluster Data Reduction RatioCluster Data Reduction Ratio
xtremio.array.cluster.space-saving-ratioCluster Space Saving RatioCluster Space Saving Ratio
xtremio.array.cluster.dedup-ratioCluster Deduplication RatioCluster Deduplication Ratio
xtremio.array.cluster.compression-factorCluster Compression Reduction RatioCluster Compression Reduction Ratio
xtremio.array.cluster.thin-provisioning-ratioCluster Thin Provisioning Saving%Cluster Thin Provisioning Saving
xtremio.array.cluster.vol-sizeCluster Volume CapacityGBCluster Volume Capacity
xtremio.array.cluster.logical-space-in-useCluster Volume Used SpaceGbCluster Volume Used Space
xtremio.array.cluster.volume-percent-usedCluster Volume Percent Used%Cluster Volume Percent Used
xtremio.array.cluster.volume-free-spaceCluster Volume Free SpaceGBCluster Volume Free Space
xtremio.array.cluster.volume-free-percentCluster Volume Free Percent%Cluster Volume Free Percent
xtremio.array.cluster.ud-ssd-spaceCluster Physical CapacityGBCluster Physical Capacity
xtremio.array.cluster.ud-ssd-space-in-useCluster Physical Space in UseGBCluster Physical Space in Use
xtremio.array.cluster.physical-percent-usedCluster Physical Percent Used%Cluster Physical Percent Used
xtremio.array.cluster.physical-free-spaceCluster Physical Free SpaceGBCluster Physical Free Space
xtremio.array.cluster.free-ud-ssd-space-in-percentCluster Physical Free Percent%Cluster Physical Free Percent
xtremio.array.cluster.totalbandwidthCluster Total BandwidthKBpsCluster Total Bandwidth
xtremio.array.cluster.readbandwidthCluster Read BandwidthKBpsCluster Read Bandwidth
xtremio.array.cluster.writebandwidthCluster Write BandwidthKBpsCluster Write Bandwidth
xtremio.array.cluster.iopsCluster Total IOPSCluster Total IOPS
xtremio.array.cluster.rd-iopsCluster Read IOPSCluster Read IOPS
xtremio.array.cluster.wr-iopsCluster Write IOPSCluster Write IOPS
xtremio.array.cluster.avg-latencyCluster Total LatencymsCluster Total Latency
xtremio.array.cluster.rd-latencyCluster Read LatencymsCluster Read Latency
xtremio.array.cluster.wr-latencyCluster Write LatencymsCluster Write Latency

G2-Storage-EMC-XtremIO Cluster Array Battery

Description

Monitors the Cluster Array battery status and its parameters.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
EMC Xtremio Battery Monitorxtremio.cluster.bbu.ups-inputBBU InputBattery Input
xtremio.cluster.bbu.fru-lifecycle-stateBBU Lifecycle StateBattery Lifecycle State
xtremio.cluster.bbu.ups-conn-stateBBU Connection StateBattery Connection State
xtremio.cluster.bbu.ups-battery-charge-in-percentBattery Charge in Percent%Battery Charge in Percent
xtremio.cluster.bbu.ups-load-in-percentBBU Load in Percent%Battery Load in Percent
xtremio.cluster.bbu.ups-load-percent-levelBBU Load LevelBattery Load Level

G2-Storage-EMC-XtremIO Cluster Array Disk

Description

Monitors the Cluster Array disk parameters.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
EMC Xtremio Disk Array Enclosure Monitorxtremio.cluster.dae.fru-lifecycle-stateDAE Lifecycle StateDAE Lifecycle State
EMC Xtremio Disk Monitorxtremio.cluster.ssd.fru-lifecycle-stateSSD FRU Lifecycle StateSSD FRU Lifecycle State
xtremio.cluster.ssd.ssd-size-in-kbSSD Capacity GBGBSSD Capacity GB
xtremio.cluster.ssd.ssd-space-in-useSSD Used GBGBSSD Used GB
xtremio.cluster.ssd.ssd-percent-usedSSD Percent Used%SSD Percent Used
xtremio.cluster.ssd.percent-endurance-remainingSSD Percent Endurance Remaining%SSD Percent Endurance Remaining
xtremio.cluster.ssd.ssd-failure-reasonSSD Failure ReasonSSD Failure Reason
xtremio.cluster.ssd.bandwidthSSD Total BandwidthKBpsSSD Total Bandwidth
xtremio.cluster.ssd.readbandwidthSSD Read BandwidthKBpsSSD Read Bandwidth
xtremio.cluster.ssd.writebandwidthSSD Write BandwidthKBpsSSD Write Bandwidth
xtremio.cluster.ssd.iopsSSD Total IOPSSSD Total IOPS
xtremio.cluster.ssd.rd-iopsSSD Read IOPSSSD Read IOPS
xtremio.cluster.ssd.wr-iopsSSD Write IOPSSSD Write IOPS

G2-Storage-EMC-XtremIO Cluster Array-DAE Controller

Description

Monitors the DAE Controller parameters

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
EMC Xtremio DAE Controller Monitorxtremio.cluster.daecontroller.fru-lifecycle-stateDAE Controller Lifecycle StateDAE Controller Lifecycle State
xtremio.cluster.daecontroller.enabled-stateDAE Controller Enabled StateDAE Controller Enabled State
xtremio.cluster.daecontroller.sas1-port-stateDAE Controller SAS1 Port StateDAE Controller SAS1 Port State
xtremio.cluster.daecontroller.sas2-port-stateDAE Controller SAS2 Port StateDAE Controller SAS2 Port State

G2-Storage-EMC-XtremIO Cluster Array-DPG & IG

Description

Monitors the Data Protection Group,Initiator Group and Infiband Switch parameters.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
EMC Xtremio Data Protection Group Monitorxtremio.cluster.dataprotectiongroup.protection-stateDP Group Protection StateData Protection Group Protection State
xtremio.cluster.dataprotectiongroup.ssd-sizeDP Group Total SSD SizeGBData Protection Group Total SSD Size
xtremio.cluster.dataprotectiongroup.useful-ssd-spaceDP Group Useful SSD SpaceGBData Protection Group Useful SSD Space
xtremio.cluster.dataprotectiongroup.ud-ssd-spaceDP Group User SpaceGBData Protection Group User Space
xtremio.cluster.dataprotectiongroup.ud-ssd-space-in-useDP Group In Use User SpaceGBData Protection Group In Use User Space
xtremio.cluster.dataprotectiongroup.rg-ud-ssd-percent-free-spaceDP Group Free User Space Percent%Data Protection Group Free User Space Percent
EMC Xtremio Infiband Switch Monitorxtremio.cluster.infibandswitch.fru-lifecycle-stateInfiband Switch Lifecycle StateInfiband Switch Lifecycle State
EMC Xtremio Initiator Group Monitorxtremio.cluster.initiatorgroup.totalbandwidthIgrp Total BandwidthKBpsInitiator Group Total Bandwidth
xtremio.cluster.initiatorgroup.readbandwidthIgrp Read BandwidthKBpsInitiator Group Read Bandwidth
xtremio.cluster.initiatorgroup.writebandwidthIgrp Write BandwidthKBpsInitiator Group Write Bandwidth
xtremio.cluster.initiatorgroup.iopsIgrp Total IOPSInitiator Group Total IOPS
xtremio.cluster.initiatorgroup.rd-iopsIgrp Read IOPSInitiator Group Read IOPS
xtremio.cluster.initiatorgroup.wr-iopsIgrp Write IOPSInitiator Group Write IOPS

G2-Storage-EMC-Xtremio Cluster Volume

Description

This template is applicable for Cluster Volume of Xtremio. This template monitors performance related to particular Cluster Volume.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
EMC Xtremio Cluster Volume Monitorxtremio.cluster.volume.vol-sizeCapacity GBGBCapacity GB
xtremio.cluster.volume.logical-space-in-useUsed GBGBUsed GB
xtremio.cluster.volume.volume-percent-usedPercent Used%Percent Used
xtremio.cluster.volume.totalbandwidthTotal BandwidthKBpsTotal Bandwidth
xtremio.cluster.volume.readbandwidthRead BandwidthKBpsRead Bandwidth
xtremio.cluster.volume.writebandwidthWrite BandwidthKBpsWrite Bandwidth
xtremio.cluster.volume.iopsTotal IOPSNULLTotal IOPS
xtremio.cluster.volume.rd-iopsRead IOPSNULLRead IOPS
xtremio.cluster.volume.wr-iopsWrite IOPSNULLWrite IOPS
xtremio.cluster.volume.avg-latencyAverage LatencymsAverage Latency
xtremio.cluster.volume.rd-latencyRead LatencymsRead Latency
xtremio.cluster.volume.wr-latencyWrite LatencymsWrite Latency

G2-Storage-EMC-XtremIO-Controller

Description

Applicable on Storage Controller / Controller

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
EMC Xtremio Controller Monitorxtremio.cluster.storagecontroller.fru-lifecycle-stateController Lifecycle StateController Lifecycle State
xtremio.cluster.storagecontroller.node-health-stateController Health StateController Health State
xtremio.cluster.storagecontroller.enabled-stateController Enabled StateController Enabled State
xtremio.cluster.storagecontroller.node-mgr-conn-stateConrtoller Connection StateController Connection State
xtremio.cluster.storagecontroller.sas1-port-stateController SAS1 Port StateController SAS1 Port State
xtremio.cluster.storagecontroller.sas2-port-stateController SAS2 Port StateController SAS2 Port State

G2-VPLEX-Local Cluster Array Template

Description

This template is applicable for Cluster Array component in VPLEX. It monitors connectivity status and failover of that Cluster Array.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
VPLEX Local Cluster Array Monitorvplex.cluster.storage-array.connectivity-statusCluster Array Connectivity StatusCluster Array Connectivity Status
vplex.cluster.storage-array.fail-overCluster Array Fail OverCluster Array Fail Over

G2-VPLEX-Local Cluster Local-Device Template

Description

This template is applicable for Cluster Device of VPLEX. This template monitors health state and operational status of that Cluster Device.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
VPLEX Cluster Local Device Monitorvplex.cluster.device.health-stateCluster Device Health StateCluster Device Health State
vplex.cluster.device.operational-statusCluster Local Device Operational StatusCluster Local Device Operational Status

G2-VPLEX-Local Cluster Template

Description

This template is applicable for Cluster of VPLEX. This template monitors UPS operational-status,battery-status,Cluster operational-status and health-state.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
VPLEX Local Cluster Monitorvplex.cluster.ups.operational-statusUPS Operational StatusUPS Operational Status
vplex.cluster.ups.battery-statusUPS Battery StatusUPS Battery Status
vplex.array.cluster.operational-statusCluster Operational StatusCluster Operational Status
vplex.array.cluster.health-stateCluster Health StateCluster Health State

G2-VPLEX-Local Consistency Group Template

Description

This template is applicable for Consistency Group of VPLEX. This template monitors operational-status of that Consistency Group.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
VPLEX Local Consistency Group Monitorvplex.cluster.consistency-group.operational-statusConsistency Group Operational StatusConsistency Group Operational Status

G2-VPLEX-Local Director Template

Description

This template is applicable for Director of VPLEX. This template monitors different metrics of that Director.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
VPLEX Local Director Monitorvplex.engine.director.fe-opsDirector Front End Throughputcounts/sDirector Front End Throughput
vplex.engine.director.fe-readDirector Front End Read Bandwidthcounts/sDirector Front End Read Bandwidth
vplex.engine.director.fe-writeDirector Front End Write Bandwidthcounts/sDirector Front End Write Bandwidth
vplex.engine.director.be-ops-readDirector Back End Read Throughputcounts/sDirector Back End Read Throughput
vplex.engine.director.be-ops-writeDirector Back End Write Throughputcounts/sDirector Back End Write Throughput
vplex.engine.director.be-opsDirector Back End Throughputcounts/sDirector Back End Throughput
vplex.engine.director.be-readDirector Back End Read BandwidthKBpsDirector Back End Read Bandwidth
vplex.engine.director.be-writeDirector Back End Write BandwidthKBpsDirector Back End Write Bandwidth
vplex.engine.director.busyDirector CPU Utilization%Director CPU Utilization
vplex.engine.director.per-cpu-busy-cpu0Director CPU0 Utilization%Director CPU0 Utilization
vplex.engine.director.per-cpu-busy-cpu1Director CPU1 Utilization%Director CPU1 Utilization
vplex.engine.director.per-cpu-busy-cpu2Director CPU2 Utilization%Director CPU2 Utilization
vplex.engine.director.per-cpu-busy-cpu3Director CPU3 Utilization%Director CPU3 Utilization
vplex.engine.director.per-cpu-busy-cpu4Director CPU4 Utilization%Director CPU0 Utilization
vplex.engine.director.per-cpu-busy-cpu5Director CPU5 Utilization%Director CPU5 Utilization
vplex.engine.director.per-cpu-busy-cpu6Director CPU6 Utilization%Director CPU6 Utilization
vplex.engine.director.per-cpu-busy-cpu7Director CPU7 Utilization%Director CPU7 Utilization
vplex.engine.director.health-stateDirector Health StateDirector Health State
vplex.engine.director.operational-statusDirector Operational StatusDirector Operational Status
vplex.engine.director.communication-statusDirector Communication StatusDirector Communication Status
vplex.engine.director.disk.operational-statusDirector Disk Operational StatusDirector Disk Operational Status
vplex.engine.director.ports.operational-statusDirector Ports Operational StatusDirector Ports Operational Status
vplex.engine.director.ports.port-statusDirector Ports Port StatusDirector Ports Port Status
vplex.engine.director.read-latDirector Front End Read LatencymsDirector Front End Read Latency
vplex.engine.director.write-latDirector Front End Write LatencymsDirector Front End Write Latency
vplex.engine.director.storage-volume.read-latDirector Back End Read LatencymsDirector Back End Read Latency
vplex.engine.director.storage-volume.write-latDirector Back End Write LatencymsDirector Back End Write Latency

G2-VPLEX-Local Engine Template

Description

This template is applicable for Engine of VPLEX. This template monitors different status metrics of that Engine.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
VPLEX Local Engine Monitorvplex.array.engine.operational-statusEngine Operational StatusEngine Operational Status
vplex.array.engine.health-stateEngine Health StateEngine Health State
vplex.array.engine.power-supplies.temperature-threshold-exceededPower Supply Temperature Threshold ExceededPower Supply Temperature Threshold Exceeded
vplex.array.engine.power-supplies.operational-statusPower Supply Operational StatusPower Supply Operational Status
vplex.array.engine.stand-by-power-supplies.operational-statusStand by Power Supplies Operational StatusStand by Power Supplies Operational Status
vplex.array.engine.stand-by-power-supplies.battery-statusEngine Standby Power Supply BatteryStatusEngine Standby Power Supply BatteryStatus

G2-VPLEX-Local Extent Template.

Description

This template is applicable for Extent of VPLEX. This template monitors operational-status and health-state of that Extent

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
VPLEX Local Extent Monitorvplex.cluster.extent.operational-statusExtent Operational StatusExtent Operational Status
vplex.cluster.extent.health-stateExtent Health StateExtent Health State

G2-VPLEX-Local LUN Template

Description

This template is applicable for LUN of VPLEX. This template monitors different metrics of that LUN.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
VPLEX Local LUN Monitorvplex.cluster.lun.operational-statusVirtual Volume Operational StatusVirtual Volume Operational Status
vplex.cluster.lun.service-statusVirtual Volume Service StatusVirtual Volume Service Status
vplex.cluster.lun.fe-lu-opsLun Throughputcounts/sLun Throughput (total read and write IOPS)
vplex.cluster.lun.health-stateVirtual Volume Health StateVirtual Volume Health State
vplex.cluster.lun.fe-lu-writeVirtual Volume Write BandwidthKBpsVirtual Volume Write Bandwidth
vplex.cluster.lun.fe-lu-readVirtual Volume Read BandwidthKBpsVirtual Volume Read Bandwidth
vplex.cluster.lun.fe-lu-read-latVirtual Volume Read LatencymicrosecVirtual Volume Read Latency
vplex.cluster.lun.fe-lu.read-writeVirtual Volume Write LatencymicrosecVirtual Volume Write Latency

G2-VPLEX-Local Storage View Template

Description

This template is applicable for Storage View of VPLEX. This template monitors operational-status of that Storage View.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
VPLEX Local Storage View Monitorvplex.cluster.storage-view.operational-statusStorage View Operational StatusStorage View Operational Status

G2-VPLEX-Local Volume Template

Description

This template is applicable for Volume of VPLEX. This template monitors operational-status and health-state of that Volume.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
VPLEX Local Volume Monitorvplex.cluster.volume.operational-statusCluster Volume Operational StatusCluster Volume Operational Status
vplex.cluster.volume.health-stateCluster Volume Health StateCluster Volume Health State

G2 - Windows Agentless Overall CPU Utilization

Description

Monitors the overall cpu utilization in percentage through windows gateway.

Prerequisites

This template only works on windows machines managed by Windows Gateway.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
G2 - Windows Agentless Overall CPU Utilization Monitoroverall_cpu_utilizationOverall CPU Utilization%Monitors the overall cpu utilization in percentage through windows gateway.

Gateway - Linux Network Remote Monitoring

Description

Gateway - Linux Network Remote Monitoring

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Gateway - Linux Network Monitorsystem.network.interface.packets.inSystem Network In packetspackets/secMonitors in Packets of each interface for Linux Devices
system.network.interface.errors.inSystem Network In ErrorsErrors per SecMonitors network in errors of each interface for Linux Devices
system.network.interface.errors.outSystem Network Out ErrorsErrors per SecMonitors Network Out traffic of each interface for Linux Devices
system.network.interface.traffic.outSystem Network Out TrafficKbpsMonitors Out traffic of each interface for Linux Devices
system.network.interface.discards.outSystem Network Out DiscardspsecMonitors network Out Discards of each interface for Linux Devices
system.network.interface.traffic.inSystem Network In trafficKbpsMonitors In traffic of each interface for Linux Devices
system.network.interface.discards.inSystem Network In discardspsecMonitors Network in discards of each interface for Linux Devices
system.network.interface.packets.outSystem Network out packetspackets/secMonitors Out packets of each interface for Linux Devices

Gateway - Linux OS Performance Remote Monitoring

Description

Gateway - Linux OS Performance Remote Monitoring

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Gateway - Linux OS Performance Monitorsystem.cpu.loadSystem CPU LoadNULLMonitors the system's last 1min,5min and 15min load. It sends per cpu core load average.
system.memory.usage.utilizationSystem Memory Utilization%Physical and virtual memory usage in percentage.
system.disk.usage.utilizationSystem Disk Utilization%Monitors disk utilization in percentage
system.os.uptimeSystem UptimemTime lapsed since last reboot in minutes
system.cpu.usage.statsSystem CPU Usage Statistics%Monitors cpu time in percentage spent in various program spaces. User - The processor time spent running user space processes. System - The amount of time that the CPU spent running the kernel. IOWait - The time the CPU spends idle while waiting for an I/O operation to complete. Idle - The time the processor spends idle. Steal - The time virtual CPU has spent waiting for the hypervisor to service another virtual CPU running on a different virtual machine. Kernal Time,Total Time
system.disk.usage.freespaceSystem FreeDisk UsageGBMonitors the Free Space usage in GB
system.disk.usage.usedspaceSystem Disk UsedSpaceGBMonitors disk used space in GB
system.cpu.usage.utilizationSystem CPU Utilization%The percentage of elapsed time that the processor spends to execute a non-Idle thread(This does not include CPU steal time)
system.memory.usage.usedspaceSystem Memory Used SpaceGBPhysical and virtual memory usage in GB
system.disk.inode.utilizationSystem Disk Inode Utilization%This monitor is to collect DISK Inode metrics for all physical disks in a server.

Gateway - Linux OS Performance Remote Monitoring - V2

Description

Template to monitor basic OS performance metrics and validate it on below Linux flavors: CentOS Linux 7 (core),Fedora 31,Suse Linux Enterprise Server 1,Ubuntu 18.04.5 Lts

Prerequisites

  1. Applicable on devices which are managed by Linux gateway 10.0.0 and above versions.
  2. SSH credentials should be assigned at device level.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Gateway - Linux OS Performance Monitor - V2system.cpu.loadSystem CPU LoadNULLMonitors the system's last 1min,5min and 15min load. It sends per cpu core load average.
system.memory.usage.utilizationSystem Memory Utilization%Physical and virtual memory usage in percentage.
system.disk.usage.utilizationSystem Disk Utilization%Monitors disk utilization in percentage
system.os.uptimeSystem UptimemTime lapsed since last reboot in minutes
system.cpu.usage.statsSystem CPU Usage Statistics%Monitors cpu time in percentage spent in various program spaces. User - The processor time spent running user space processes. System - The amount of time that the CPU spent running the kernel. IOWait - The time the CPU spends idle while waiting for an I/O operation to complete. Idle - The time the processor spends idle. Steal - The time virtual CPU has spent waiting for the hypervisor to service another virtual CPU running on a different virtual machine. Kernal Time,Total Time
system.disk.usage.freespaceSystem FreeDisk UsageGBMonitors the Free Space usage in GB
system.disk.usage.usedspaceSystem Disk UsedSpaceGBMonitors disk used space in GB
system.cpu.usage.utilizationSystem CPU Utilization%The percentage of elapsed time that the processor spends to execute a non-Idle thread(This does not include CPU steal time)
system.memory.usage.usedspaceSystem Memory Used SpaceGBPhysical and virtual memory usage in GB
system.disk.inode.utilizationSystem Disk Inode Utilization%This monitor is to collect DISK Inode metrics for all physical disks in a server.

Gateway - VMware VCenter Appliance Certificates Expiry

Description

Monitors VMware vCenter Certificate(s) Expiry In Days.

Prerequisites

This template will applicable to VMware vCenter Appliance and Tested in VMware version: VMware 6.7.0 build-8170161

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Gateway - VMware vCenter Appliance Certificates Expiry Monitorvmware_vcenter_appliance_certificates_expiry_inDaysVMware vCenter Appliance Certificates Expiry In DaysDaysIt monitors VMware vCenter appliance certificates expiry in days

Gateway - VMware VCenter Appliance Certificates Expiry - v2

Description

Monitors VMware vCenter Certificate(s) Expiry In Days.

Prerequisites

  1. This template will be applicable to VMware vCenter Appliance and Tested in VMware version: VMware 6.7.0 build-8170161
  2. Bash prompt must be enabled on target device,Below command for enabling bash prompt on vmware vcenter appliance machine.

command: shell.set –enabled true

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Gateway - VMware vCenter Appliance Certificates Expiry Monitor - v2vmware_vcenter_appliance_certificates_expiry_inDaysVMware vCenter Appliance Certificates Expiry In DaysDaysIt monitors VMware vCenter appliance certificates expiry in days

Gateway - VMware VCenter Appliance Service Status

Description

Monitors VMware vCenter Service(s) status.

Prerequisites

This template will applicable to VMware vCenter Appliance and Tested in vmware version: VMware 6.7.0 build-8170161

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Gateway - VMware Vcenter Appliance Service Status Monitorvmware_vcenter_appliance_service_StatusVmware Vcenter Appliance Service StatusNULLMonitors VMware vCenter appliance Service(s) status. Service Running: Graph Value - 0,Alert Severity - Ok Service Stopped: Graph Value - 2,Alert Severity - Critical Service Unknown: Reasons for unknown could be any of these: 1. The service could be changing from running to stopped or stopped to running 2. Service name could be invalid

Glassfish JVM Template

Description

Glassfish JVM Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Glassfish JVM Monitorglassfish.jvm.memorypool.codecache.peak_usage_usedGlassfish JVM Memorypool Codecache Peak Usage UsedBytesNULL
glassfish.jvm.memorypool.codecache.peak_usage_initGlassfish JVM Memorypool Codecache Peak Usage InitKBNULL
glassfish.jvm.memorypool.codecache.peak_usage_maxGlassfish JVM Memorypool Codecache Peak Usage MaxKBNULL
glassfish.jvm.memorypool.edenspace.peak_usage_usedGlassfish JVM Memorypool Edenspace Peak Usage UsedKBNULL
glassfish.jvm.memorypool.edenspace.peak_usage_committedGlassfish JVM Memorypool.edenspace Peak Usage CommittedKBNULL
glassfish.jvm.memorypool.edenspace.peak_usage_initGlassfish JVM Memorypool Edenspace Peak Usage InitKBNULL
glassfish.jvm.memorypool.edenspace.peak_usage_maxGlassfish JVM Memorypool Edenspace Peak Usage MaxKBNULL
glassfish.jvm.memorypool.metaspace.peak_usage_usedGlassfish JVM Memorypool Metaspace Peak Usage UsedKBNULL
glassfish.jvm.memorypool.metaspace.peak_usage_committedGlassfish JVM Memorypool.metaspace Peak Usage CommittedKBNULL
glassfish.jvm.memorypool.metaspace.peak_usage_initGlassfish JVM Memorypool Metaspace Peak Usage InitKBNULL
glassfish.jvm.memorypool.metaspace.peak_usage_maxGlassfish JVM Memorypool Metaspace Peak Usage MaxKBNULL
glassfish.jvm.memorypool.survivorspace.peak_usage_usedGlassfish JVM Memorypool Survivorspace Peak UsageKBNULL
glassfish.jvm.memorypool.survivorspace.peak_usage_committedGlassfish JVM Memorypool Survivorspace Peak Usage CommittedKBNULL
glassfish.jvm.memorypool.survivorspace.peak_usage_initGlassfish JVM Memorypool Survivorspace Peak Usage InitKBNULL
glassfish.jvm.memorypool.survivorspace.peak_usage_maxGlassfish JVM Memorypool Survivorspace Peak Usage MaxKBNULL
glassfish.jvm.memorypool.tenuredgen.peak_usage_usedGlassfish JVM Memorypool Tenuredgen Peak Usage UsedKBNULL
glassfish.jvm.memorypool.tenuredgen.peak_usage.initGlassfish JVM Memorypool Tenuredgen Peak Usage InitKBNULL
glassfish.jvm.memorypool.tenuredgen.peak_usage.maxGlassfish JVM Memorypool Tenuredgen Peak Usage MaxKBNULL
glassfish.jvm.memorypool.tenuredgen.peak_usage_committedGlassfish JVM Memorypool Tenuredgen Peak Usage CommittedKBNULL
glassfish.jvm.memorypool.codecache.peak_usage_committedGlassfish JVM Memorypool Codecache Peak Usage CommittedKBNULL
glassfish.jvm.gc.collection.countGlassfish JVM GC Collection CountcountThe number of garbage collections that have ocurred.
glassfish.jvm.gc.thread.countGlasssfish JVM GC Thread CountcountThe total number of garbage collections that have occurred

Glassfish Thread,Memory,Sessions Template

Description

Glassfish Thread,Memory,Sessions Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Glassfish Memory Monitorglassfish.memory.usedheapsize.countGlassfish Memory Used Heap SizeBytesamount of used heap memory in bytes
glassfish.memory.usednonheapsize.countGlassfish Memory Used Non Heap SizeBytesamount of used non heap size memory in bytes
glassfish.memory.committedheapsize.countGlassfish Memory Committed Heap SizeBytesamount of memory in bytes that is committed for the Java virtual machine to use
glassfish.memory.committednonheapsize.countGlassfish Memory Committed Non Heap SizeBytesamount of memory in bytes that is committed for the Java virtual machine to use
glassfish.memory.maxheapsize.countGlassfish Memory Max Heap SizeBytesmaximum amount of heap memory in bytes that can be used for memory management
glassfish.memory.maxnonheapsize.countGlassfish Memory Max Non Heap SizeBytesmaximum amount of non heap memory in bytes that can be used for memory management
Glassfish Sessions Monitorglassfish.activesessionscurrentGlassfish Active Session CurrentcountNumber of active sessions
glassfish.activatedsessionstotalGlassfish Total Activated SessionscountTotal number of sessions ever activated
glassfish.expiredsessionstotalGlassfish Total Expired SessionscountTotal number of sessions ever expired
glassfish.passivatedsessionstotalGlassfish Total Passivated SessionscountTotal number of sessions ever passivated
glassfish.persistedsessionstotalGlassfish Total Persisted SessionscountTotal number of sessions ever persisted
glassfish.sessionstotalGlassfish Total SessionscountTotal number of sessions ever created
glassfish.rejectedsessionstotalGlassfish Total Rejected SessioscountTotal number of sessions ever rejected
Glassfish Thread Monitorglassfish.totalstartedthreadcountGlassfish Total Started Thread CountcountReturns the total number of threads created and also started since the Java virtual machine started
glassfish.daemonthreadcountGlassfish Daemon Thread CountcountReturns the current number of live daemon threads
glassfish.threadcountGlassfish Thread CountcountReturns the current number of live threads including both daemon and non-daemon threads

Glassfish Transaction,Classes,System Stats Template

Description

Glassfish Transaction,Classes,System Stats Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Glassfish Classes Monitorglassfish.loadedclass.countGlassfish Loaded Class Countcountnumber of classes currently loaded in the JVM
glassfish.unloadedclass.countGlassfish UnLoaded CountcountTotal number of classes unloaded since the JVM started
glassfish.totalservletsloaded.countGlassfish Total Servlets LoadedcountTotal number of Servlets ever loaded
glassfish.activeservletsloaded.countGlassfish Active Servlets LoadedcountNumber of Servlets loaded
glassfish.jsp.totaljspcountGlassfish JSP Total CountcountTotal number of JSP pages ever loaded
glassfish.jsp.jsperrorcountGlassfish JSP Error CountcountTotal number of errors triggered by JSP page invocations
glassfish.jsp.jspreloadedcountGlassfish JSP Reloaded CountcountTotal number of JSP pages that were reloaded
glassfish.jsp.jspcountGlassfish JSP CountcountNumber of active JSP pages
Glassfish System Stats Monitorglassfish.jvm.uptimeGlassfish JVM Uptimemsuptime of the Java virtual machine in milliseconds
glassfish.servlet.processingtimeGlassfish Servlet Processing TimemsAverage response time
glassfish.request.processingtimeGlassfish Request Processing TimemsAverage request processing time
glassfish.request.errorcountGlassfish Request Error CountcountCumulative value of the error count,with error count representing the number of cases where the response code was greater than or equal to 400
glassfish.request.requestcountGlassfish Request Request CountcountCumulative number of requests processed so far
Glassfish Transaction Monitorglassfish.transaction.committedcountGlassfish Transaction Committed CountcountProvides the number of transactions that have been committed.
glassfish.transaction.rolledbackcountGlassfish Transaction Rolledback CountcountProvides the number of transactions that have been rolled back.
glassfish.transaction.activecountGlassfish Transaction Active CountcountProvides the number of transactions that are currently active.
glassfish.transaction.service.stateGlassfish Transaction StateNULLIndicates if the transaction service has been frozen.

HAProxy Performance Template

Description

HAProxy Performance Templace

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HA Proxy Monitorhaproxy.denied_req_rateHAProxy-DeniedRequestsReq per SecThe rate of denied requests.
haproxy.denied_resp_rateHAProxy-DeniedResponsesRes per SecThe rate of denied responses.
haproxy.errors_con_rateHAProxy-ConnectionErrorsErrors per SecThe rate of connection errors.
haproxy.errors_req_rateHAProxy-RequestErrorsErrors per SecThe rate of request errors.
haproxy.errors_resp_rateHAProxy-ResponseErrorsErrors per SecThe rate of response errors.
haproxy.lastchk_timeHAProxy-LastHealthCheckTimemsTime in ms took to finish last health check.
haproxy.mbytes_in_rateHAProxy-DataReceivedMBpsThe rate at which the data is received per server in MB.
haproxy.mbytes_out_rateHAProxy-DataSentMBpsThe rate at which the data is sent per server in MB.
haproxy.requests_queueHAProxy-QueuedRequestsNULLNumber of requests in the server queue.
haproxy.requests_rateHAProxy-RequestsReq per SecThe rate of received HTTP requests.
haproxy.servers_activeHAProxy-ActiveServersNULLNumber of current active servers (backend). Validates against total active servers.
haproxy.servers_backupHAProxy-BackupServersNULLNumber of current backup servers (backend). Validates against total backup servers.
haproxy.statusHAProxy StatusChecks the status of the backend servers.
haproxy.session_currentHAProxy-SessionsActiveNULLCurrent number of concurrent connections.
haproxy.session_rateHAProxy-SessionsSessions per SecNumber of sessions per second.
haproxy.warning.retr_rateHAProxy-WarnRetriesRetries per SecThe rate of retries (warning).
haproxy.warning.redis_rateHAProxy-WarnRedispatchesDispatches per SecThe rate of dispatches (warning).
haproxy.http.errors_1xxHAProxy 1xx HTTP ErrorNumber of HTTP error responses with 1xx code
haproxy.http.errors_2xxHAProxy 2xx HTTP ErrorNumber of HTTP error responses with 2xx code
haproxy.http.errors_3xxHAProxy 3xx HTTP ErrorNumber of HTTP error responses with 3xx code
haproxy.http.errors_4xxHAProxy 4xx HTTP ErrorNumber of HTTP error responses with 4xx code
haproxy.http.errors_5xxHAProxy 5xx HTTP ErrorNumber of HTTP error responses with 5xx code
haproxy.requests.totalHAProxy Total RequestsNULLTotal number of HTTP requests received
haproxy.http.errors.otherHAProxy Http Other ErrorsNULLhttp responses with other codes (protocol error)
haproxy.queue.timeHAProxy Queue TimemsThe average queue time in ms over the 1024 last requests
haproxy.connect.timeHAProxy Connect TimemsThe average connect time in ms over the 1024 last requests
haproxy.response.timeHAProxy Response TimemsThe average response time in ms over the 1024 last requests (0 for TCP)
haproxy.session.timeHAProxy Session TimemsThe average total session time in ms over the 1024 last requests.
haproxy.server.downtimeHAProxy Server DowntimesTotal downtime (in seconds). The value for the backend is the downtime for the whole backend,not the sum of the server downtime.

HBase Master JVM Template

Description

HBase Master JVM Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HBase Master JVM Monitorhbase.jvm.thread.countHBase JVM Thread CountcountDisplays the number of active threads in the system.
hbase.jvm.thread.peakcountHBase JVM Thread PeakCountcountpeak number of threads running in the JVM since it started.
hbase.jvm.heap_memory_initHBase JVM Heap Memory InitBytesThe initial Java heap memory allocated.
hbase.jvm.heap_memory_maxHBase JVM Heap Memory MaxBytesThe maximum Java heap memory available.
hbase.jvm.non_heap_memory_committedHBase JVM Non Heap Memory CommittedBytesThe total Java non-heap memory committed to be used.
hbase.jvm.non_heap_memory_initHBase JVM Non Heap Memory InitBytesThe initial Java non-heap memory allocated.
hbase.jvm.non_heap_memory_usedHBase JVM Non Heap Memory UsedBytesThe total Java non-heap memory used.
hbase.jvm.non_heap_memory_maxHBase JVM Non Heap Memory MaxBytesThe maximum Java non-heap memory available.
hbase.jvm.memorypool.codecache.peak_usage_usedHBase JVM MemoryPool Codecache Peak Usage UsedKBDisplays the peak usage of code cache in kilo bytes
hbase.jvm.memorypool.codecache.peak_usage_initHBase JVM MemoryPool Codecache Peak Usage InitKBDisplays the initial peak usage max of code cache in kilo bytes
hbase.jvm.memorypool.edenspace.peak_usage_maxHBase JVM MemoryPol Edenspace Peak Usage MaxKBDisplays the maximum peak usage max of edenspace in kilo bytes
hbase.jvm.memorypool.edenspace.peak_usage_initHBase JVM MemoryPool Edenspace Peak Usage InitKBDisplays the initial peak usage of edenspace in kilo bytes
hbase.jvm.memorypool.edenspace.peak_usage_committedHBase JVM MemoryPool Edenspace Peak Usage CommittedKBThe total edenspace memory committed to be used
hbase.jvm.memorypool.metaspace.peak_usage_initHBase JVM MemoryPool Metaspace Peak Usage InitKBDisplays the initial peak usage of metaspace in kilo bytes
hbase.jvm.memorypool.metaspace.peak_usage_usedHBase JVM MemoryPool Metaspace Peak Usage UsedKBDisplays the peak usage of metaspace in kilo bytes
hbase.jvm.memorypool.metaspace.peak_usage_maxHBase JVM MemoryPool Metaspace Peak Usage MaxKBDisplays the maximum peak usage of metaspace in kilo bytes
hbase.jvm.memorypool.metaspace.peak_usage_committedHBase JVM MemoryPool Metaspace Peak Usage CommittedKBThe total metaspace memory committed to be used
hbase.jvm.memorypool.survivorspace.peak_usage_usedHBase JVM MemoryPool Survivorspace Peak Usage UsedKBDisplays the peak usage of survivorspace in kilo bytes
hbase.jvm.memorypool.survivorspace.peak_usage_initHBase JVM MemoryPool Survivorspace Peak Usage InitKBDisplays the initial peak usage max of survivorspace in kilo bytes
hbase.jvm.memorypool.survivorspace.peak_usage_maxHBase JVM MemoryPol SurvivorspacePeak Usage MaxKBDisplays the peak maximum usage of survivorspace in kilo bytes
hbase.jvm.memorypool.survivorspace.peak_usage_committedHBase JVM MemoryPool Survivorspace Peak Usage CommittedKBThe total survivorspace memory committed to be used
hbase.jvm.memorypool.tenuredgen.peak_usageHBase JVM MemoryPool Tenuredgen Peak UsageKBDisplays the peak usage of tenuredgen in kilo bytes
hbase.jvm.memorypool.tenuredgen.peak_usage.initHBase JVM MemoryPool Tenuredgen Peak Usage InitKBDisplays the initial peak usage max of tenuredgen in kilo bytes
hbase.jvm.memorypool.tenuredgen.peak_usage.maxHBase JVM MemoryPool Tenuredgen Peak Usage MaxKBDisplays the peak maximum usage of tenuredgen in kilo bytes
hbase.jvm.memorypool.tenuredgen.peak_usage_committedHBase JVM MemoryPol Edenspace Peak Usage CommittedKBThe total tenuredgen memory committed to be used
hbase.jvm.gc.collection.countHBase JVM GC Collection Countcountthe number of garbage collections that have ocurred.
hbase.jvm.gc.thread.countHBase JVM GC Thread CountcountThe total number of garbage collections that have occurred
hbase.jvm.totalstartedthread.countHBase JVM TotalStartedThread CountcountDisplays the number of threads marked as daemons in the system.
hbase.jvm.daemonthread.countHBase JVM Daemonthread CountcountDisplays the number of threads marked as daemons in the system.
hbase.jvm.heap_memory_usedHBase JVM Heap Memory UsedBytesThe total Java heap memory used.
hbase.jvm.heap_memory_committedHBase JVM Heap Memory CommittedBytesThe total Java heap memory committed to be used.
hbase.jvm.memorypool.codecache.peak_usage_maxHBase JVM MemoryPool Codecache Peak Usage MaxKBDisplays the maximum peak usage of code cache in kilo bytes
hbase.jvm.memorypool.codecache.peak_usage_committedHBase JVM MemoryPool Codecache Peak Usage CommittedKBThe total codecache memory committed to be used
hbase.jvm.memorypool.edenspace.peak_usage_usedHBase JVM MemoryPool Edenspace Peak Usage UsedKBDisplays the peak usage of edenspace in kilo bytes

HBase Master Performance Template

Description

HBase Master Performance Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HBase Master Performance Monitorhbase.master.regionservers.countHBase Master RegionServers CountcountNumber of live regionservers
hbase.master.deadregionservers.countHBase Master Dead RegionServers CountcountNumber of dead regionservers
hbase.master.starttimeHBase Master StartTimemsMaster Start Time
hbase.master.activetimeHBase Master ActiveTimemsMaster Active Time
hbase.master.clusterrequestsHBase Master ClusterRequestsReq per SecCluster requests
hbase.master.ritcountHBase Master RitCountcountThe number of regions in transition
hbase.master.ritcountoverthresholdHBase Master RitCount OverthresholdcountThe number of regions that have been in transition longer than a threshold time (default: 60 seconds)
hbase.master.ritoldestageHBase Master RitoldestageNULLThe age of the longest region in transition,in milliseconds
hbase.master.openconnections.countHBase Master OpenConnections CountcountNumber of open connections.
hbase.master.activehandler.countHBase Master ActiveHandler CountcountNumber of active rpc handlers.
hbase.master.receivedbytesHBase Master ReceivedBytesBytesNumber of bytes received.
hbase.master.assignminHBase Master AssignminmsAssign Region Min
hbase.master.assignmaxHBase Master AssignMaxmsAssign Region Max
hbase.master.assignmeanHBase Master AssignMeanmsAssign Region Mean
hbase.master.assignmedianHBase Master AssignMedianmsAssign Region Median
hbase.master.assign99thpercentileHBase Master Assign99thpercentilemsAssign Region Time 99%
hbase.master.queuesizeHBase Master QueueSizeBytesNumber of bytes in the call queues.
hbase.master.callsingeneralqueue.countHBase Master Callsingeneralqueue CountcountNumber of calls in the general call queue.
hbase.master.callsinreplicationqueue.countHBase Master Callsinreplicationqueue CountcountNumber of calls in the replication call queue.
hbase.master.callsinpriorityqueue.countHBase Master Callsinpriorityqueue CountcountNumber of calls in the priority call queue.
hbase.master.totalcalltime.maxHBase Master Totalcalltime Maxmstotal call time,including both queued and processing time.
hbase.master.totalcalltime.minHBase Master Totalcalltime Minmstotal call time,including both queued and processing time.
hbase.master.totalcalltime.meanHBase Master Totalcalltime Meanmstotal call time,including both queued and processing time.
hbase.master.totalcalltime.medianHBase Master Totalcalltime Medianmstotal call time,including both queued and processing time.
hbase.master.totalcalltime.99thpercentileHBase Master Totalcalltime 99thpercentilemstotal call time,including both queued and processing time.
hbase.master.tag.isactivemasterHBase Master Tag IsactivemasterNULLIs Active Master

HBase Regionserver Jvm Template

Description

testing

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HBase Regionserver Jvm Monitorhbase.regionserver.jvm.daemonthread.countHBase Regionserver JVM Daemonthread CountcountDisplays the number of threads marked as daemons in the system.
hbase.regionserver.jvm.gc.collection.countHBase Regionserver JVM GC Collection CountcountThe number of garbage collections that have ocurred.
hbase.regionserver.jvm.gc.thread.countHBase Regionserver JVM GC Thread CountcountThe total number of garbage collections that have occurred
hbase.regionserver.jvm.heap_memory_committedHBase Regionserver JVM Heap Memory CommittedBytesThe total Java heap memory committed to be used.
hbase.regionserver.jvm.heap_memory_initHBase Regionserver JVM Heap Memory InitBytesThe initial Java heap memory allocated.
hbase.regionserver.jvm.heap_memory_maxHBase Regionserver JVM Heap Memory MaxBytesThe maximum Java heap memory available.
hbase.regionserver.jvm.heap_memory_usedHBase Regionserver JVM Heap Memory UsedBytesThe total Java heap memory used.
hbase.regionserver.jvm.memorypool.cmsoldgen.peak_usageHBase Regionserver JVM Memorypool Cmsoldgen Peak UsageKBDisplays the peak usage of cmsoldgen in kilo bytes
hbase.regionserver.jvm.memorypool.cmsoldgen.peak_usage.initHBase Regionserver JVM Memorypool Cmsoldgen Peak Usage InitKBDisplays the initial peak usage max of cmsoldgen in kilo bytes
hbase.regionserver.jvm.memorypool.cmsoldgen.peak_usage.maxHBase Regionserver JVM Memorypool Cmsoldgen Peak Usage MaxKBDisplays the peak maximum usage of cmsoldgen in kilo bytes
hbase.regionserver.jvm.memorypool.cmsoldgen.peak_usage_committedHBase Regionserver JVM Memorypool Cmsoldgen Peak Usage CommittedKBThe total cmsoldgen memory committed to be used
hbase.regionserver.jvm.memorypool.codecache.peak_usage_committedHBase Regionserver JVM Memorypool Codecache Peak Usage CommittedKBThe total codecache memory committed to be used
hbase.regionserver.jvm.memorypool.codecache.peak_usage_initHBase Regionserver JVM Memorypool Codecache Peak Usage InitKBDisplays the initial peak usage max of code cache in kilo bytes
hbase.regionserver.jvm.memorypool.codecache.peak_usage_maxHBase Regionserver JVM Memorypool Codecache Peak Usage MaxKBDisplays the maximum peak usage of code cache in kilo bytes
hbase.regionserver.jvm.memorypool.codecache.peak_usage_usedHBase Regionserver JVM Memorypool Codecache Peak Usage UsedKBDisplays the peak usage of code cache in kilo bytes
hbase.regionserver.jvm.memorypool.edenspace.peak_usage_committedHBase Regionserver JVM Memorypool Par Eden Space Peak Usage CommittedKBThe total Par Eden Space memory committed to be used
hbase.regionserver.jvm.memorypool.edenspace.peak_usage_initHBase Regionserver JVM Memorypool Par edenspace Peak Usage InitKBDisplays the initial peak usage of paredenspace in kilo bytes
hbase.regionserver.jvm.memorypool.edenspace.peak_usage_maxHBase Regionserver JVM Memorypool Pardenspace Peak Usage MaxKBDisplays the maximum peak usage max of Paredenspace in kilo bytes
hbase.regionserver.jvm.memorypool.edenspace.peak_usage_usedHBase Regionserver JVM Memorypool Pardenspace Peak Usage UsedKBDisplays the peak usage of paredenspace in kilo bytes
hbase.regionserver.jvm.memorypool.metaspace.peak_usage_committedHBase Regionserver JVM Memorypool Metaspace Peak Usage CommittedKBThe total metaspace memory committed to be used
hbase.regionserver.jvm.memorypool.metaspace.peak_usage_initHBase Regionserver JVM Memorypool Metaspace Peak Usage InitKBDisplays the initial peak usage of metaspace in kilo bytes
hbase.regionserver.jvm.memorypool.metaspace.peak_usage_maxHBase Regionserver JVM Memorypool Metaspace Peak Usage MaxKBDisplays the maximum peak usage of metaspace in kilo bytes
hbase.regionserver.jvm.memorypool.metaspace.peak_usage_usedHBase Regionserver JVM Memorypool Metaspace Peak Usage UsedKBDisplays the peak usage of metaspace in kilo bytes
hbase.regionserver.jvm.memorypool.survivorspace.peak_usage_committedHBase Regionserver JVM Memorypool Parsurvivorspace Peak Usage CommittedKBThe total parsurvivorspace memory committed to be used
hbase.regionserver.jvm.memorypool.survivorspace.peak_usage_initHBase Regionserver JVM Memorypool Parsurvivorspace Peak Usage InitKBDisplays the initial peak usage max of parsurvivorspace in kilo bytes
hbase.regionserver.jvm.memorypool.survivorspace.peak_usage_maxHBase Regionserver JVM Memorypool Parsurvivorspace Peak Usage MaxKBDisplays the peak maximum usage of parsurvivorspace in kilo bytes
hbase.regionserver.jvm.memorypool.survivorspace.peak_usage_usedHBase Regionserver JVM Memorypool ParSurvivorspace Peak Usage UsedKBDisplays the peak usage of parsurvivorspace in kilo bytes
hbase.regionserver.jvm.non_heap_memory_committedHBase Regionserver JVM Non Heap Memory CommittedBytesThe total Java non-heap memory committed to be used.
hbase.regionserver.jvm.non_heap_memory_initHBase Regionserver JVM Non Heap Memory InitBytesThe initial Java non-heap memory allocated.
hbase.regionserver.jvm.non_heap_memory_maxHBase Regionserver JVM Non Heap Memory MaxBytesThe maximum Java non-heap memory available.
hbase.regionserver.jvm.non_heap_memory_usedHBase Regionserver JVM Non Heap Memory UsedBytesThe total Java non-heap memory used.
hbase.regionserver.jvm.thread.countHBase Regionserver JVM Thread CountcountDisplays the number of active threads in the system.
hbase.regionserver.jvm.thread.peakcountHBase Regionserver JVM Thread Peak Countcountpeak number of threads running in the JVM since it started.
hbase.regionserver.jvm.totalstartedthread.countHBase Regionserver JVM Totalstartedthread CountcountDisplays the number of threads marked as daemons in the system.

HBase Regionserver Template

Description

HBase Regionserver Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HBase Regionserver Monitorhbase.regionserver.ipc.queue_sizeHBase Region Server IPC Queue SizeBytesNumber of bytes in the call queues.
hbase.regionserver.ipc.num_open_connectionsHBase Region Server IPC Number of Open ConnectionscountNumber of open connections.
hbase.regionserver.ipc.num_active_handlerHBase Region Server IPC Num Active HandlercountThe number of active RPC handlers.
hbase.regionserver.ipc.total_call_time_maxHBase Region Server IPC Total Call Time MaxmsTotal call time,including both queued and processing time.
hbase.regionserver.regions.num_regionsHBase Region Server Regions Num RegionscountNumber of regions in the metrics system
hbase.regionserver.server.region_countHBase Region Server Region Count for ServercountNumber of regions
hbase.regionserver.server.store_countHBase Region Server Store Count for ServercountNumber of Stores
hbase.regionserver.server.hlog_file_countHBase Region Server Hlog File Count for ServercountNumber of WAL Files
hbase.regionserver.server.hlog_file_sizeHBase Region Server Hlog File Size for ServerBytesSize of all WAL Files
hbase.regionserver.server.store_file_countHBase Region Server Store File Count for ServercountNumber of Store Files
hbase.regionserver.server.mem_store_sizeHBase Region Server Mem Store Size for ServerBytesSize of the mem store
hbase.regionserver.server.store_file_sizeHBase Region Server Store File Size for ServerBytesSize of store files being served.
hbase.regionserver.server.total_request_countHBase Region Server Total Request Count for ServercountA total number of requests this RegionServer has answered.
hbase.regionserver.server.read_request_countHBase Region Server Read Request Count for ServercountThe number of reading requests this region server has answered.
hbase.regionserver.wal.append_time.num_opsHBase Regionserver WAL Appen Time Num OpsmsTime an append to the log took.
hbase.regionserver.server.write_request_countHBase Region Server Write Request Count for ServercountNumber of Checks and Mutate calls that failed the checks.
hbase.regionserver.wal.low_replica_roll_requestHBase Regionserver WAL Low Replica Roll RequestmsHow many times a log roll was requested due to too few DN's in the write pipeline.
hbase.regionserver.server.check_mutate_passed_countHBase Region Server Check Mutate Passed Count for ServercountNumber of Checks and Mutate calls that passed the checks.
hbase.regionserver.wal.append_countHBase Regionserver WAL Append CountcountNumber of appends to the write ahead log.
hbase.regionserver.wal.roll_requestHBase Regionserver WAL Roll RequestmsHow many times a log roll has been requested total
hbase.regionserver.wal.slow_append_countHBase Regionserver WAL Slow Append CountcountNumber of appends that were slow.
hbase.regionserver.wal.sync_time.num_opsHBase Regionserver WAL Sync Time Num OpsmsThe time it took to sync the WAL to HDFS.
hbase.regionserver.wal.append_size.num_opsHBase Regionserver WAL Append Size Num OpsBytesSize (in bytes) of the data appended to the WAL.
hbase.regionserver.server.slow_get_countHBase Regionserver Server Slow Get CountcountThe number of Gets that took over 1000ms to complete
hbase.regionserver.server.split_success_countHBase Regionserver Server Split Success CountcountNumber of successfully executed splits
hbase.regionserver.server.split_request_countHBase Regionserver Server Split Request CountcountNumber of splits requested
hbase.regionserver.server.slow_delete_countHBase Regionserver Server Slow Delete CountcountThe number of Deletes that took over 1000ms to complete
hbase.regionserver.server.slow_append_countHBase Regionserver Server Slow Append CountcountThe number of Appends that took over 1000ms to complete
hbase.regionserver.server.blocked_request_countHBase Regionserver Server Blocked Request CountcountThe number of blocked requests because of memstore size is larger than blockingMemStoreSize
hbase.regionserver.server.major_compacted_cells_sizeHBase Regionserver Server Major Compacted Cells SizeBytesThe total amount of data processed during major compactions,in bytes
hbase.regionserver.server.compacted_cells_sizeHBase Regionserver Server Compacted Cells SizeBytesThe total amount of data processed during minor compactions,in bytes
hbase.regionserver.server.flushed_cells_sizeHBase Regionserver Server Flushed Cells SizeBytesThe total amount of data flushed to disk,in bytes
hbase.regionserver.server.major_compacted_cells_countHBase Regionserver Server Major Compacted Cells CountcountThe number of cells processed during major compactions
hbase.regionserver.server.compacted_cells_countHBase Regionserver Server Compacted Cells CountcountThe number of cells processed during minor compactions
hbase.regionserver.server.flushed_cells_countHBase Regionserver Server Flushed Cells CountcountThe number of cells flushed to disk
hbase.regionserver.server.updates_blocked_timeHBase Regionserver Server Updates Blocked TimemsNumber of MS updates have been blocked so that the memstore can be flushed.
hbase.regionserver.server.block_cache_failed_insertion_countHBase Regionserver Server Block Cache Failed Insertion CountmsNumber of times that a block cache insertion failed. Usually due to size restrictions.
hbase.regionserver.server.block_cache_express_hit_percentHBase Regionserver Server Block Cache Express Hit Percent%The percent of the time that requests with the cache turned on hit the cache.
hbase.regionserver.server.block_cache_hit_percentHBase Regionserver Server.block Cache Hit Percent%Percent of block cache requests that are hits
hbase.regionserver.server.block_cache_eviction_count_primaryHBase Regionserver Server Block Cache Eviction Count PrimarycountCount of the number of blocks evicted from primary replica in the block cache.
hbase.regionserver.server.block_cache_eviction_countHBase Regionserver Server Block Cache Eviction CountcountCount of the number of blocks evicted from the block cache.
hbase.regionserver.server.block_cache_miss_count_primaryHBase Regionserver Server Block Cache Miss Count PrimarycountNumber of requests for a block of primary replica that missed the block cache.
hbase.regionserver.server.block_cache_miss_countHBase Regionserver Server Block Cache Miss CountcountNumber of requests for a block that missed the block cache.
hbase.regionserver.server.block_cache_hit_count_primaryHBase Regionserver Server Block Cache Hit Count PrimarycountCount of hit on primary replica in the block cache.
hbase.regionserver.server.block_cache_hit_countHBase Regionserver Server Block Cache Hit CountcountCount of the hit on the block cache.
hbase.regionserver.server.block_cache_sizeHBase Regionserver Server Block Cache SizeBytesSize of the block cache.
hbase.regionserver.server.block_cache_countHBase Regionserver Server Block Cache CountcountNumber of block in the block cache.
hbase.regionserver.server.block_cache_free_sizeHBase Regionserver Server Block Cache Free SizeBytesSize of the block cache that is not occupied.
hbase.regionserver.server.flush_queue_lengthHBase Regionserver Server Flush Queue LengthcountLength of the queue for region flushes
hbase.regionserver.server.compaction_queue_lengthHBase Regionserver Server Compaction Queue LengthcountLength of the queue for compactions.
hbase.regionserver.server.split_queue_lengthHBase Regionserver Server Split Queue LengthcountLength of the queue for splits.
hbase.regionserver.server.percent_files_local_secondary_regionsHBase Regionserver Server Percent Files Local Secondary Regions%The percent of HFiles used by secondary regions that are stored on the local hdfs data node.
hbase.regionserver.server.percent_files_localHBase Regionserver Server Percent Files Local%The percent of HFiles that are stored on the local hdfs data node.
hbase.regionserver.server.mutations_without_wal_sizeHBase Regionserver Server Mutations Without Wal SizeBytesSize of data that has been sent by clients with the write ahead logging turned off.
hbase.regionserver.server.mutations_without_wal_countHBase Regionserver Server Mutations Without Wal CountcountNumber of mutations that have been sent by clients with the write ahead logging turned off.
hbase.regionserver.server.static_bloom_sizeHBase Regionserver Server Static Bloom SizeBytesUncompressed size of the static bloom filters.
hbase.regionserver.server.static_index_sizeHBase Regionserver Server Static Index SizeBytesUncompressed size of the static indexes.
hbase.regionserver.server.store_file_index_sizeHBase Regionserver Server Store File Index SizeBytesSize of indexes in storefiles on disk.

HBase Sample Template

Description

testing

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HBase Sample Monitorhbase.regionserver.ipc.queue_sizeHBase Region Server IPC Queue SizeBytesNumber of bytes in the call queues.

HDFS DataNode Template

Description

HDFS DataNode Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HDFS DataNode JVM Monitorhdfs.datanode.memory.non.heap.usedHDFS DataNode Non Heap Memory UsedMBCurrent non-heap memory used in MB
hdfs.datanode.memory.non.heap.committedHDFS DataNode Non Heap Memory CommittedMBCurrent non-heap memory committed in MB
hdfs.datanode.memory.non.heap.maxHDFS DataNode Non Heap Memory MaxMBMax non-heap memory size in MB
hdfs.datanode.memory.heap.usedHDFS DataNode Heap Memory UsedMBCurrent heap memory used in MB
hdfs.datanode.memory.heap.committedHDFS DataNode Heap Memory CommittedMBCurrent heap memory committed in MB
hdfs.datanode.memory.heap.maxHDFS DataNode Heap Memory MaxMBMax heap memory size in MB
hdfs.datanode.memory.maxHDFS DataNode Max MemoryMBMax memory size in MB
hdfs.datanode.threads.newHDFS DataNode New ThreadscountCurrent number of NEW threads
hdfs.datanode.threads.runnableHDFS DataNode Runnable ThreadscountCurrent number of RUNNABLE threads
hdfs.datanode.threads.blockedHDFS DataNode Blocked ThreadscountCurrent number of BLOCKED threads
hdfs.datanode.threads.waitingHDFS DataNode Waiting ThreadscountCurrent number of WAITING threads
hdfs.datanode.threads.timed.waitingHDFS DataNode Timed Waiting ThreadscountCurrent number of TIMED_WAITING threads
hdfs.datanode.threads.terminatedHDFS DataNode Terminated ThreadscountCurrent number of TERMINATED threads
HDFS DataNode Monitorhdfs.datanode.dfs.remainingHDFS DataNode DFS RemainingBytesThe remaining disk space left
hdfs.datanode.dfs.capacityHDFS DataNode DFS CapacityBytesTotal configured HDFS storage capacity
hdfs.datanode.dfs.usedHDFS DataNode DFS UsedBytesTotal HDFS storage used
hdfs.datanode.cache.capacityHDFS DataNode Cache CapacityBytesThe capacity of the HDFS cache on this DataNode.
hdfs.datanode.cache.usedHDFS DataNode Cache UsedBytesThe total cache used.
hdfs.datanode.last.volume.failure.dateHDFS DataNode Last Volume Failure DatemsThe date/time of the last volume failure in milliseconds since epoch
hdfs.datanode.estimated.capacity.lost.totalHDFS DataNode Total Lost Estimated CapacityBytesThe estimated capacity lost in bytes
hdfs.datanode.num.blocks.cachedHDFS DataNode Blocks Cached NumbercountThe number of blocks cached
hdfs.datanode.num.blocks.failed.to.cacheHDFS DataNode Blocks Failed To Cache NumbercountThe total number of blocks the DataNode failed to cache.
hdfs.datanode.num.blocks.failed.to.uncacheHDFS DataNode Blocks Failed To Uncache NumbercountThe total number of blocks the DataNode failed to uncache.
hdfs.datanode.num.failed.volumesHDFS DataNode Failed Volumes NumbercountTotal number of failed volumes

HDFS DataNode Template Monitor

Description

HDFS DataNode Template Monitor

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HDFS DataNode Monitorhdfs.datanode.dfs.remainingHDFS DataNode DFS RemainingBytesThe remaining disk space left
hdfs.datanode.dfs.capacityHDFS DataNode DFS CapacityBytesTotal configured HDFS storage capacity
hdfs.datanode.dfs.usedHDFS DataNode DFS UsedBytesTotal HDFS storage used
hdfs.datanode.cache.capacityHDFS DataNode Cache CapacityBytesThe capacity of the HDFS cache on this DataNode.
hdfs.datanode.cache.usedHDFS DataNode Cache UsedBytesThe total cache used.
hdfs.datanode.last.volume.failure.dateHDFS DataNode Last Volume Failure DatemsThe date/time of the last volume failure in milliseconds since epoch
hdfs.datanode.estimated.capacity.lost.totalHDFS DataNode Total Lost Estimated CapacityBytesThe estimated capacity lost in bytes
hdfs.datanode.num.blocks.cachedHDFS DataNode Blocks Cached NumbercountThe number of blocks cached
hdfs.datanode.num.blocks.failed.to.cacheHDFS DataNode Blocks Failed To Cache NumbercountThe total number of blocks the DataNode failed to cache.
hdfs.datanode.num.blocks.failed.to.uncacheHDFS DataNode Blocks Failed To Uncache NumbercountThe total number of blocks the DataNode failed to uncache.
hdfs.datanode.num.failed.volumesHDFS DataNode Failed Volumes NumbercountTotal number of failed volumes

HDFS NameNode Template

Description

HDFS NameNode Template

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HDFS NameNode JVM Monitorhdfs.namenode.non.heap.memory.usedHDFS Namenode Non Heap Memory UsedMBCurrent non-heap memory used in MB
hdfs.namenode.non_heap_memory_committedHDFS Namenode Non Heap Memory CommittedMBCurrent non-heap memory committed in MB
hdfs.namenode.non_heap_memory_maxHDFS Namenode Non Heap Memory MaxMBMax non-heap memory size in MB
hdfs.namenode.heap_memory_usedHDFS Namenode Heap Memory UsedMBCurrent heap memory used in MB
hdfs.namenode.heap_memory_committedHDFS Namenode Heap Memory CommittedMBCurrent heap memory committed in MB
hdfs.namenode.heap_memory_maxHDFS Namenode Heap Memory MaxNULLMax heap memory size in MB
hdfs.namenode.max.memoryHDFS Namenode Max MemoryNULLJVM Max memory size in MB
hdfs.namenode.threads_newHDFS Namenode New ThreadscountCurrent number of NEW threads
hdfs.namenode.threads_blockedHDFS Namenode Blocked ThreadscountCurrent number of BLOCKED threads
hdfs.namenode.threads_waitingHDFS Namenode Waiting ThreadscountCurrent number of WAITING threads
hdfs.namenode.threads_timed_waitingHDFS Namenode Timed Waiting ThreadscountCurrent number of TIMED_WAITING threads
hdfs.namenode.threads_terminatedHDFS Namenode Terminated ThreadscountCurrent number of TERMINATED threads
hdfs.namenode.threads_runnableHDFS Namenode Runnable ThreadscountCurrent number of RUNNABLE threads
HDFS NameNode Monitorhdfs.namenode.blocks.totalHDFS Namenode Total blockscountTotal number of allocated blocks in the system
hdfs.namenode.capacity.remainingHDFS Namenode Remaining CapacityBytesRemaining disk space left in bytes
hdfs.namenode.capacity.usedHDFS Namenode Used CapacityBytesCapacity used by Namenodes.
hdfs.namenode.capacity.totalHDFS Namenode Total CapacityBytesTotal capacity of the Namenode in bytes
hdfs.namenode.files.totalHDFS Namenode Total FilescountTotal number of files
hdfs.namenode.total.loadHDFS Namenode Total LoadcountTotal load on the file system
hdfs.namenode.scheduled.replication.blocksHDFS Namenode Scheduled Replication BlockscountCurrent number of blocks scheduled for replications.
hdfs.namenode.pending.deletion.blocksHDFS Namenode Pending Deletion BlockscountCurrent number of blocks pending for deletion.
hdfs.namenode.under.replicated.blocksHDFS Namenode Under Replicated BlockscountNumber of under replicated blocks
hdfs.namenode.pending.replication.blocksHDFS Namenode Pending Replication BlockscountNumber of blocks pending for replication.
hdfs.namenode.max.objectsHDFS Namenode Max ObjectscountMaximum number of files HDFS supports.
hdfs.namenode.num.live.data.nodesHDFS Namenode Live Data NodescountTotal number of live data nodes.
hdfs.namenode.num.dead.data.nodesHDFS Namenode Total Dead DataNodescountTotal number of dead data nodes
hdfs.namenode.num.decom.live.data.nodesHDFS Namenode Decomm Live Data NodescountNumber of decommissioning live data nodes
hdfs.namenode.num.decom.dead.data.nodesHDFS Namenode Decomm Dead Data NodescountNumber of decommissioning dead data nodes
hdfs.namenode.num.decomm.data.nodesHDFS Namenode Decomm Data NodescountNumber of decommissioning data nodes
hdfs.namenode.num.stale.data.nodesHDFS Namenode Stale DataNodescountNumber of stale data nodes
hdfs.namenode.num.stale.storagesHDFS Namenode Stale StoragescountNumber of stale storages
hdfs.namenode.missing.blocksHDFS Namenode Missing BlockscountNumber of missing blocks
hdfs.namenode.corrupt.blocksHDFS Namenode Corrupt blockscountNumber of corrupt blocks
hdfs.namenode.statusHDFS Namenode StatusNULLNameNode Status,displays,1 : active Mode,2 : Standby Mode

Hitachi DF RAID Monitors

Description

Monitors the DF RAID command statistics like number of received read/write commands,read/write hit commands and read/write hit rate to the LUN and to the internal LUN. Also it monitors the write date rate in the cache memory.[Hitachi-DF-RAID-LAN-MIB.mib]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Hitachi DF Cache Memory Write Data Ratehitachi.df.cache.write.data.rateCache Memory Write Data RateRepresents the write data rate in the cache memory.[OID: 1.3.6.1.4.1.116.5.11.1.2.4.1]
Hitachi DF Internal LUN Command Statisticshitachi.df.internal.lun.received.read.commandsInternal LUN Received Read CommandsRepresents the number of received read commands to the internal LUN.[OIDs: 1.3.6.1.4.1.116.5.11.1.2.7.1.1.1,1.3.6.1.4.1.116.5.11.1.2.7.1.1.2]
hitachi.df.internal.lun.read.hit.commandsInternal LUN Read Hit CommandsRepresents the number of read hit commands to the internal LUN.[OIDs: 1.3.6.1.4.1.116.5.11.1.2.7.1.1.1,1.3.6.1.4.1.116.5.11.1.2.7.1.1.3]
hitachi.df.internal.lun.read.hit.rateInternal LUN Read Hit RateRepresents the read hit rate to the internal LUN.[OIDs: 1.3.6.1.4.1.116.5.11.1.2.7.1.1.1,1.3.6.1.4.1.116.5.11.1.2.7.1.1.4]
hitachi.df.internal.lun.received.write.commandsInternal LUN Received Write CommandsRepresents the number of received write commands to the internal LUN.[OIDs: 1.3.6.1.4.1.116.5.11.1.2.7.1.1.1,1.3.6.1.4.1.116.5.11.1.2.7.1.1.5]
hitachi.df.internal.lun.write.hit.commandsInternal LUN Write Hit CommandsRepresents the number of write hit commands to the internal LUN.[OIDs: 1.3.6.1.4.1.116.5.11.1.2.7.1.1.1,1.3.6.1.4.1.116.5.11.1.2.7.1.1.6]
hitachi.df.internal.lun.write.hit.rateInternal LUN Write Hit RateRepresents the write hit rate to the internal LUN.[OIDs: 1.3.6.1.4.1.116.5.11.1.2.7.1.1.1,1.3.6.1.4.1.116.5.11.1.2.7.1.1.7]
Hitachi DF LUN Command Statisticshitachi.df.lun.received.read.commandsLUN Recieved Read CommandsRepresents the number of received read commands.[OIDs: 1.3.6.1.4.1.116.5.11.1.2.3.1.1.1,1.3.6.1.4.1.116.5.11.1.2.3.1.1.2]
hitachi.df.lun.read.hit.commandsLUN Read Hit CommandsRepresents the number of read hit commands to LUN.[OIDs: 1.3.6.1.4.1.116.5.11.1.2.3.1.1.1,1.3.6.1.4.1.116.5.11.1.2.3.1.1.3]
hitachi.df.lun.read.hit.rateLUN Read Hit RateRepresents the read hit rate to LUN.[OIDs: 1.3.6.1.4.1.116.5.11.1.2.3.1.1.1,1.3.6.1.4.1.116.5.11.1.2.3.1.1.4]
hitachi.df.lun.received.write.commandsLUN Received Write CommandsRepresents the number of received write commands.[OIDs: 1.3.6.1.4.1.116.5.11.1.2.3.1.1.1,1.3.6.1.4.1.116.5.11.1.2.3.1.1.5]
hitachi.df.lun.write.hit.commandsLUN Write Hit CommandsRepresents the number of write hit commands to LUN.[OIDs: 1.3.6.1.4.1.116.5.11.1.2.3.1.1.1,1.3.6.1.4.1.116.5.11.1.2.3.1.1.6]
hitachi.df.lun.write.hit.rateLUN Write Hit RateRepresents the write hit rate to LUN.[OIDs: 1.3.6.1.4.1.116.5.11.1.2.3.1.1.1,1.3.6.1.4.1.116.5.11.1.2.3.1.1.7]

Hitachi HCP

Description

Template to monitor Hitachi HCP parameters like Services Status,System,Node,Storage,Storage Component,Storage Pool,Tenant,Storage License,Compression Stats and Replication.

Prerequisites

This template defined on HCP-MIB and validated on HCP version 9.2.1.9

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Hitachi HCP - Systemhcp_system_SpindownStorageCapacityHCP System Spindown Storage CapacityGBIt monitors the total amount of spindown storage capacity on all storage nodes [HCP-MIB :: spindownStorageCapacity : 1.3.6.1.4.1.116.5.46.7.1.20.0]
hcp_system_SpindownStorageUtilizationHCP System Spindown Storage Utilization%It monitors the total amount of spindown storage utilized on all storage node.
hcp_system_IndexedObjectCountHCP System Indexed Object CountcountIt monitors the number of indexed,and therefore searchable,objects stored in the repository [HCP-MIB :: indexedObjectCount : 1.3.6.1.4.1.116.5.46.7.1.10.0]
hcp_system_EconomyStorageUsageHCP System Economy Storage UsageGBIt monitors the total amount of used space on all S-Series nodes [HCP-MIB :: economyStorageUsage : 1.3.6.1.4.1.116.5.46.7.1.33.0]
hcp_system_systemDplSafeOrUnsafeHCP System Dpl Safe Or UnsafeIt monitors whether HCP system DPL setting is below what is considered safe or not. Possible values are 1 - Unsafe 2 - Safe [HCP-MIB :: systemDplUnsafe : 1.3.6.1.4.1.116.5.46.7.1.14.0]
hcp_system_SpindownStorageUsageHCP System Spindown Storage UsageGBIt monitors the total amount of used space in spindown storage on all storage nodes [HCP-MIB :: spindownStorageUsage : 1.3.6.1.4.1.116.5.46.7.1.19.0]
hcp_system_IndexingTotalSharedVolumesCapacityHCP System Indexing Total Shared Volumes CapacityTBIt monitors the total space on all shared volumes [HCP-MIB :: indexingTotalSharedVolumesCapacity : 1.3.6.1.4.1.116.5.46.7.1.25.0]
hcp_system_EconomyStorageCapacityHCP System Economy Storage CapacityGBIt monitors the Total amount of storage capacity on all S-Series nodes [HCP-MIB :: economyStorageCapacity : 1.3.6.1.4.1.116.5.46.7.1.34.0]
hcp_system_TotalCapacityHCP System Total CapacityTBIt monitors the total amount of storage space in the HCP system,in bytes [HCP-MIB :: totalCapacity : 1.3.6.1.4.1.116.5.46.7.1.6.0]
hcp_system_UnavailableObjectsHCP System Unavailable ObjectscountIt monitors the total number of unavailable objects in the HCP system [HCP-MIB :: unavailableObjects : 1.3.6.1.4.1.116.5.46.7.1.37.0]
hcp_system_EconomyStorageUtilizationHCP System Economy Storage Utilization%It monitors the total amount of space utilized on all S-Series nodes.
hcp_system_ProtectedVolumeHCP System Protected VolumeGBIt monitors the amount of storage space,in bytes,currently occupied by all stored data,including original file data,metadata [HCP-MIB :: protectedVolume : 1.3.6.1.4.1.116.5.46.7.1.7.0]

Hitachi HCP - Node Uptime

Description

Template to monitor the Hitachi HCP nodes uptime. Validated it on Hitachi HCP G10 v9.2.1.9. System Object OID: 1.3.6.1.4.1.116.5.46. MIB Name: HCP-MIB

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Hitachi HCP - Node Uptimehcp_node_UptimeHCP Node UptimeDaysIt represents the Hitachi HCP Node uptime.[HCP-MIB::nodeBootTime - 1.3.6.1.4.1.116.5.46.1.1.1.6,nodeIP - 1.3.6.1.4.1.116.5.46.1.1.1.2]

Hitachi HCP Ver2

Description

Template to monitor Hitachi hcp parameters like Services Status,System,Node,Storage,Storage Component,Storage Pool,Tenant,Storage License,Compression Stats and Replication.

Prerequisites

This template defined on HCP-MIB and validated on HCP version 9.2.1.9

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Hitachi HCP - System Ver2hcp_system_SpindownStorageCapacityHCP System Spindown Storage CapacityGBIt monitors the total amount of spindown storage capacity on all storage nodes [HCP-MIB :: spindownStorageCapacity : 1.3.6.1.4.1.116.5.46.7.1.20.0]
hcp_system_SpindownStorageUtilizationHCP System Spindown Storage Utilization%It monitors the total amount of spindown storage utilized on all storage node.
hcp_system_IndexedObjectCountHCP System Indexed Object CountcountIt monitors the number of indexed,and therefore searchable,objects stored in the repository [HCP-MIB :: indexedObjectCount : 1.3.6.1.4.1.116.5.46.7.1.10.0]
hcp_system_EconomyStorageUsageHCP System Economy Storage UsageGBIt monitors the total amount of used space on all S-Series nodes [HCP-MIB :: economyStorageUsage : 1.3.6.1.4.1.116.5.46.7.1.33.0]
hcp_system_systemDplSafeOrUnsafeHCP System Dpl Safe Or UnsafeIt monitors whether HCP system DPL setting is below what is considered safe or not. Possible values are 1 - Unsafe 2 - Safe [HCP-MIB :: systemDplUnsafe : 1.3.6.1.4.1.116.5.46.7.1.14.0]
hcp_system_SpindownStorageUsageHCP System Spindown Storage UsageGBIt monitors the total amount of used space in spindown storage on all storage nodes [HCP-MIB :: spindownStorageUsage : 1.3.6.1.4.1.116.5.46.7.1.19.0]
hcp_system_IndexingTotalSharedVolumesCapacityHCP System Indexing Total Shared Volumes CapacityTBIt monitors the total space on all shared volumes [HCP-MIB :: indexingTotalSharedVolumesCapacity : 1.3.6.1.4.1.116.5.46.7.1.25.0]
hcp_system_EconomyStorageCapacityHCP System Economy Storage CapacityGBIt monitors the Total amount of storage capacity on all S-Series nodes [HCP-MIB :: economyStorageCapacity : 1.3.6.1.4.1.116.5.46.7.1.34.0]
hcp_system_TotalCapacityHCP System Total CapacityTBIt monitors the total amount of storage space in the HCP system,in bytes [HCP-MIB :: totalCapacity : 1.3.6.1.4.1.116.5.46.7.1.6.0]
hcp_system_UnavailableObjectsHCP System Unavailable ObjectscountIt monitors the total number of unavailable objects in the HCP system [HCP-MIB :: unavailableObjects : 1.3.6.1.4.1.116.5.46.7.1.37.0]
hcp_system_EconomyStorageUtilizationHCP System Economy Storage Utilization%It monitors the total amount of space utilized on all S-Series nodes.
hcp_system_ProtectedVolumeHCP System Protected VolumeGBIt monitors the amount of storage space,in bytes,currently occupied by all stored data,including original file data,metadata [HCP-MIB :: protectedVolume : 1.3.6.1.4.1.116.5.46.7.1.7.0]
hcp_system_IrreparableObjectsPresentHCP System Irreparable Objects PresentMonitors whether the repository contains any irreparable objects or not.[HCP-MIB :: irreparableObjectsPresent : 1.3.6.1.4.1.116.5.46.7.1.15.0]
hcp_system_NonReplicatingIrreparableObjectsHCP System Non Replicating Irreparable ObjectscountMonitors the total number of objects in the HCP system that currently cannot be replicated because they are irreparable.[HCP-MIB :: nonReplicatingIrreparableObjects : 1.3.6.1.4.1.116.5.46.7.1.35.0]
Hitachi HCP - Compression Stats Ver1hcp_compression_ObjectsCompressedHCP Compression Objects CompressedcountIt monitors the number of objects and parts of multipart objects currently compressed [HCP-MIB :: compressionObjectsCompressed : 1.3.6.1.4.1.116.5.46.5.2.1.5]
hcp_compression_PercentSpaceSavedHCP Compression Percent Space Saved%It monitors the amount of storage space currently saved by object and part compression,expressed as a percentage of the total space available for storing objects and parts of multipart objects [HCP-MIB :: compressionPercentSpaceSaved : 1.3.6.1.4.1.116.5.46.5.2.1.4]
Hitachi HCP - Node Ver1hcp_node_NicDegradedHCP Node Nic DegradedIt monitors the indication of whether (1) or not (2) the node has a degraded [HCP-MIB :: nodeNicDegraded : 1.3.6.1.4.1.116.5.46.1.1.1.14]
hcp_node_MemoryTotalHCP Node Memory TotalGBIt monitors the total amount of memory on the node,in bytes [HCP-MIB :: nodeMemoryTotal : 1.3.6.1.4.1.116.5.46.1.1.1.20]
hcp_node_StatusHCP Node StatusIt monitors the current status of the node .Possible values are unavailable(0),available(4) [HCP-MIB :: nodeStatus : 1.3.6.1.4.1.116.5.46.1.1.1.7]
hcp_node_UtilizationPercentHCP Node Utilization Percent%It monitors the total amount of space utilized on all the logical volumes managed by the nodes.
hcp_node_SANStatusHCP Node SAN StatusIt monitors the indication of the status of the SAN path [HCP-MIB :: nodeSANStatus : 1.3.6.1.4.1.116.5.46.1.1.1.12]
hcp_node_CapacityHCP Node CapacityGBIt monitors the total amount of storage space on all the logical volumes managed by the node,in bytes [HCP-MIB :: nodeCapacity : 1.3.6.1.4.1.116.5.46.1.1.1.5]
hcp_node_NicFailureHCP Node NIc FailureIt monitors the indication of whether (1) or not (2) the node has a failed NIC [HCP-MIB :: nodeNicFailure : 1.3.6.1.4.1.116.5.46.1.1.1.11]
hcp_node_AvailabilityHCP Node AvailabilityGBIt monitors the total amount of unused space on all the logical volumes managed by the node,in bytes [HCP-MIB :: nodeAvailability : 1.3.6.1.4.1.116.5.46.1.1.1.4]
hcp_node_UsageHCP Node UsageGBIt monitors the total amount of used space on all the logical volumes managed by the node,in bytes [HCP-MIB :: nodeUsage : 1.3.6.1.4.1.116.5.46.1.1.1.3]
Hitachi HCP - Replication Ver1hcp_replication_LinkStatusHCP Replication Link StatusIt monitors the status of the replication link [HCP-MIB :: replicationLinkStatus : 1.3.6.1.4.1.116.5.46.5.7.1.1.6]
hcp_replication_LinkErrorsPerSecondHCP Replication Link Errors Per SecondspsecIt monitors the cached number of errors that have occurred on the replication link during the past minute,in errors per second [HCP-MIB :: replicationLinkErrorsPerSecond : 1.3.6.1.4.1.116.5.46.5.7.1.1.16]
hcp_replication_LinkSuspendedOrNotHCP Replication Link Suspended Or NotIt monitors the suspends (1) or resumes (2) t state of he replication link [HCP-MIB :: replicationLinkSuspended : 1.3.6.1.4.1.116.5.46.5.7.1.1.8]
hcp_replication_LinkOperationsPerSecondHCP Replication Link Operations Per SecondpsecIt monitors the cached operation rate for the replication link during the past minute,in operations per second [HCP-MIB :: replicationLinkOperationsPerSecond : 1.3.6.1.4.1.116.5.46.5.7.1.1.14]
hcp_replication_LinkBytesPerSecondHCP Replication Link Bytes Per SecondBpsIt monitors the cached data transmission rate for the replication link during the past minute,in bytes per second [HCP-MIB :: replicationLinkBytesPerSecond : 1.3.6.1.4.1.116.5.46.5.7.1.1.12]
Hitachi HCP - Services Status Ver2hcp_service_DispositionStatusHCP Service Disposition StatusIt monitors the Current status of the disposition service. Possible values are waiting(-1),stopped(0),completed(1),ongoing(2),running(3),fixing(4),unrecoverable(5),stopping(6),disabled(7) [HCP-MIB :: dispositionStatus : 1.3.6.1.4.1.116.5.46.5.13.1.1.0]
hcp_service_DuplicateEliminationStatusHCP Service Duplicate Elimination StatusIt monitors the current status of the duplicate elimination service. Possible values are waiting(-1),stopped(0),completed(1),ongoing(2),running(3),fixing(4),unrecoverable(5),stopping(6),disabled(7).[HCP-MIB :: duplicateEliminationStatus : 1.3.6.1.4.1.116.5.46.5.4.1.1.0]
hcp_service_CompressionStatusHCP Service Compression StatusIt monitors the current status of the compression service. Possible values are waiting(-1),stopped(0),completed(1),ongoing(2),running(3),fixing(4),unrecoverable(5),stopping(6),disabled(7) [HCP-MIB :: compressionStatus : 1.3.6.1.4.1.116.5.46.5.2.1.1.0]
hcp_service_CapacityBalancingStatusHCP Service Capacity Balancing StatusIt monitors the current status of the capacity balancing service. Possible values are waiting(-1),stopped(0),completed(1),ongoing(2),running(3),fixing(4),unrecoverable(5),stopping(6),disabled(7) [HCP-MIB :: capacityBalancingStatus : 1.3.6.1.4.1.116.5.46.5.1.1.1.0]
hcp_service_StorageTieringStatusHCP Service Storage Tiering StatusIt monitors the current status of the storage tiering service. Possible values are waiting(-1),stopped(0),completed(1),ongoing(2),running(3),fixing(4),unrecoverable(5),stopping(6),disabled(7) [HCP-MIB :: storageTieringStatus : 1.3.6.1.4.1.116.5.46.5.12.1.1.0]
hcp_service_GarbageCollectionStatusHCP Service Garbage Collection StatusIt monitors the current status of the garbage collection service. Possible values are waiting(-1),stopped(0),completed(1),ongoing(2),running(3),fixing(4),unrecoverable(5),stopping(6),disabled(7) [HCP-MIB :: garbageCollectionStatus : 1.3.6.1.4.1.116.5.46.5.5.1.1.0]
hcp_service_ProtectionStatusHCP Service Protection StatusIt monitors the current status of the protection service. Possible values are waiting(-1),stopped(0),completed(1),ongoing(2),running(3),fixing(4),unrecoverable(5),stopping(6),disabled(7) [HCP-MIB :: protectionStatus : 1.3.6.1.4.1.116.5.46.5.6.1.1.0]
hcp_service_ScavengingStatusHCP Service Scavenging StatusIt monitors the current status of the scavenging service. Possible values are waiting(-1),stopped(0),completed(1),ongoing(2),running(3),fixing(4),unrecoverable(5),stopping(6),disabled(7)[HCP-MIB :: scavengingStatus : 1.3.6.1.4.1.116.5.46.5.8.1.1.0]
hcp_service_ContentVerificationStatusHCP Service Content Verification StatusMonitors the current status of the content verification service.Possible values are waiting(-1),stopped(0),completed(1),ongoing(2),running(3),fixing(4),unrecoverable(5),stopping(6),disabled(7) [HCP-MIB :: contentVerificationStatus : 1.3.6.1.4.1.116.5.46.5.3.1.1.0]
Hitachi HCP - Storage Component Status Ver1hcp_storagecomponent_StatusHCP Storage Component StatusIt monitors the status of storage component. Possible values are good(0),warning(1),error(2) [HCP-MIB :: storageComponentStatus : 1.3.6.1.4.1.116.5.46.2.2.1.4]
Hitachi HCP - Storage License Ver1hcp_storage_ExtendedLicensedCapacityHCP Storage Extended Licensed CapacityTBIt monitors the licensed capacity for extended storage [HCP-MIB :: storageExtendedLicensedCapacity : 1.3.6.1.4.1.116.5.46.2.5.5]
hcp_storage_LicensedCapacityHCP Storage Licensed CapacityTBIt monitors the licensed capacity for HCP and HCP S-node storage [HCP-MIB :: storageLicensedCapacity : 1.3.6.1.4.1.116.5.46.2.5.8]
hcp_storage_UsedCapacityHCP Storage Used CapacityTBIt monitors the total space used between HCP and HCP S-node storage [HCP-MIB :: storageUsedCapacity : 1.3.6.1.4.1.116.5.46.2.5.7]
hcp_storage_ExtendedLicenseUtilizationHCP Storage Extended License Utilization%It monitors the total space utilized on extended storage.
hcp_storage_ActiveUsedCapacityHCP Storage Active Used CapacityTBIt monitors the total space used on active storage [HCP-MIB :: storageActiveUsedCapacity : 1.3.6.1.4.1.116.5.46.2.5.3]
hcp_storage_ActiveLicensedCapacityHCP Storage Active Licensed CapacityTBIt monitors the Licensed capacity for active storage [HCP-MIB :: storageActiveLicensedCapacity : 1.3.6.1.4.1.116.5.46.2.5.3]
hcp_storage_LicenseUtilizationHCP Storage License Utilization%It monitors the total space utilized between HCP and HCP S-node storage
hcp_storage_ActiveLicenseUtilizationHCP Storage Active License Utilization%It monitors the total space utilized on active storage
hcp_storage_ExtendedUsedCapacityHCP Storage Extended Used CapacityTBIt monitors the total space used on extended storage [HCP-MIB :: storageExtendedUsedCapacity : 1.3.6.1.4.1.116.5.46.2.5.4]
Hitachi HCP - Storage Pool Status Ver1hcp_storagepool_StatusHCP Storage Pool StatusIt monitors the status of storage pool . Possible values are good(0),warning(1),error(2) [HCP-MIB :: storagePoolStatus : 1.3.6.1.4.1.116.5.46.2.3.1.4]
Hitachi HCP - Storage Ver2hcp_storage_AvailabilityHCP Storage AvailabilityGBIt monitors the amount of unused space on the logical volume,in bytes [HCP-MIB :: storageAvailability : 1.3.6.1.4.1.116.5.46.2.1.1.4]
hcp_storage_CapacityHCP Storage CapapcityGBIt monitors the total amount of space on the logical volume,in bytes [HCP-MIB :: storageCapacity : 1.3.6.1.4.1.116.5.46.2.1.1.5]
hcp_storage_UsageHCP Storage UsageGBIt monitors the amount of used space on the logical volume,in bytes [HCP-MIB :: storageUsage : 1.3.6.1.4.1.116.5.46.2.1.1.3]
hcp_storage_UtilizationHCP Storage Utilization%It monitors the total amount of space utilized on the logical volumes.
hcp_storage_VolumeSpinStateValueHCP Storage Volume Spin State ValueMonitors the volume spin state.[HCP-MIB :: volumeSpinStateValue : 1.3.6.1.4.1.116.5.46.2.1.1.10]. Possible values are Unknown(0),Spinup requested(1),Spinup wait(2),Spinup error(4),Spinup in progress(8),Spinup fail(16),Spinning(32),Spindown requested(64),Spindown wait(128),Spindown error(256),Spindown fail(512),Spun down(1024),Failed(268435456).
hcp_storage_StatusHCP Storage StatusIt monitors the current status of the logical volume. Possible values are unavailable(0),broken(1),suspended(2),initialized(3),available(4),degraded(5) [HCP-MIB :: storageStatus : 1.3.6.1.4.1.116.5.46.2.1.1.7]
Hitachi HCP - Tenant Ver2hcp_tenant_LogicalStorageSpaceUsedHCP Tenant Logical Storage Space UsedMBIt monitors the total size,in bytes,of the stored data and custom metadata before it was added to the namespaces owned by the tenant [HCP-MIB :: tenantLogicalBytesUsed : 1.3.6.1.4.1.116.5.46.4.1.1.25]
hcp_tenant_ObjectsStoredHCP Tenant Objects StoredcountIt monitors the number of objects currently stored in all namespaces owned by the tenant [HCP-MIB :: tenantObjectsStored : 1.3.6.1.4.1.116.5.46.4.1.1.19]
hcp_tenant_PhysicalStorageSpaceUsedHCP Tenant Physical Storage Space UsedMBIt monitors the Total amount of storage,in bytes,used by all the namespaces owned by the tenant to store object data and metadata [HCP-MIB :: tenantPhysicalBytesUsed : 1.3.6.1.4.1.116.5.46.4.1.1.24]
hcp_tenant_ObjectsIndexedHCP Tenant Objects IndexedcountIt monitors the number of indexed objects currently stored in all namespaces owned by the tenant [HCP-MIB :: tenantObjectsIndexed : 1.3.6.1.4.1.116.5.46.4.1.1.20]
hcp_tenant_TenantCapacityHCP Tenant Capacity%Monitors the tenant capacity
hcp_tenant_HardQuotaHCP Tenant Hard QuotaGBIt monitors the hard quota for the tenant [HCP-MIB :: tenantHardQuota : 1.3.6.1.4.1.116.5.46.4.1.1.21]
hcp_tenant_SoftQuotaHCP Tenant Soft Quota%It monitors the Soft quota for the tenant [HCP-MIB :: tenantSoftQuota : 1.3.6.1.4.1.116.5.46.4.1.1.22]
hcp_tenant_IsTenantOwnsNonReplicatedDpl1NamespaceHCP Tenant Is Tenant Owns Non Replicated Dpl1 NamespaceIt monitors the indication of whether (1) or not (2) the tenant owns any non-replicated namespaces with a DPL that is considered unsafe for the HCP system hardware configuration [HCP-MIB :: nonReplicatedDpl1Namespace : 1.3.6.1.4.1.116.5.46.4.1.1.26]

Hitachi HNAS

Description

Template to monitor Hitachi HNAS parameters like chassis drive status,CIFS Traffic parameters like Bytes Read,Bytes Written,cluster quorum device status,CPU Utilization,Fan parameters like Speed Status,Speed,field programmable gate array utilization,NFS Traffic parameters like Bytes Read,Bytes Written,NVRAM pool waited allocations,power supply unit status,Temperature Sensor parameters like Status,Reading.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Hitachi HNAS - Chassis Drive Statushnas_chassisdrive_StatusHNAS Chassis Drive StatusIt monitors the RAID status of the chassis drive. Possible values are raidUnknown(1),raidDegraded(2),raidRebuilding(3),raidFailed(4),raidInvalid(5),raidGood(6). Component or instance is represented as chassis drive cluster node ID and chassis drive ID with dotted notation.[BLUEARC-SERVER-MIB::chassisDriveStatus:1.3.6.1.4.1.11096.6.1.1.1.2.1.15.1.4].
Hitachi HNAS - CIFS Traffichnas_cifs_BytesWrittenHNAS CIFS Bytes WrittenBpsIt monitors the number of bytes written.[BLUEARC-SERVER-MIB::protocolXferStatsBytesWritten:1.3.6.1.4.1.11096.6.1.1.6.6.8.1.5].
hnas_cifs_BytesReadHNAS CIFS Bytes ReadBpsIt monitors the number of bytes read.[BLUEARC-SERVER-MIB::protocolXferStatsBytesRead:1.3.6.1.4.1.11096.6.1.1.6.6.8.1.4].
Hitachi HNAS - Cluster Quorum Device Statushnas_clusterquorum_DeviceStatusHNAS Cluster Quorum Device StatusIt monitors the status of the quorum device. Possible values are unknown(0),unconfigured(1),offLine(2),owned(3),configured(4),granted(5),clusterNodeNotUp(6),misconfigured(7).[BLUEARC-SERVER-MIB::clusterQuorumDeviceStatus:1.3.6.1.4.1.11096.6.1.1.1.2.5.7.0].
Hitachi HNAS - CPU Utilizationhnas_CpuUtilizationHNAS CPU Utilization%It monitors the HNAS CPU utilization. Component or instance is represented as Cluster Node Index and CPU Index with dotted notation.[BLUEARC-SERVER-MIB::cpuUtilization:1.3.6.1.4.1.11096.6.1.1.6.1.2.1.3].
Hitachi HNAS - Fanhnas_fan_SpeedStatusHNAS Fan Speed StatusIt monitors the speed status of the fan. Possible values are ok(1),warning(2),severe(3),unknown(4). Component or instance is represented as fan cluster node ID and fan ID with dotted notation.[BLUEARC-SERVER-MIB::fanSpeedStatus:1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.4].
hnas_fan_SpeedHNAS Fan SpeedrpmIt monitors the speed of the fan. Component or instance is represented as fan cluster node ID and fan ID with dotted notation.[BLUEARC-SERVER-MIB::fanSpeed:1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.5].
Hitachi HNAS - Field Programmable Gate Array Utilizationhnas_fpga_UtilizationHNAS FPGA Utilization%It monitors the current percentage usage averaged over the last second of this Field Programmable Gate Array.[BLUEARC-SERVER-MIB::fpgaUtilization:1.3.6.1.4.1.11096.6.1.1.6.1.4.1.4].
Hitachi HNAS - NFS Traffichnas_nfs_BytesReadHNAS NFS Bytes ReadBpsIt monitors the number of bytes read.[BLUEARC-SERVER-MIB::protocolXferStatsBytesRead:1.3.6.1.4.1.11096.6.1.1.6.6.8.1.4].
hnas_nfs_BytesWrittenHNAS NFS Bytes WrittenBpsIt monitors the number of bytes written.[BLUEARC-SERVER-MIB::protocolXferStatsBytesWritten:1.3.6.1.4.1.11096.6.1.1.6.6.8.1.5].
Hitachi HNAS - NVRAM Pool Waited Allocationshnas_nvrampool_WaitedAllocationsHNAS NVRAM Pool Waited AllocationscountIt monitors the number of allocations,for the entire NVRAM pool,for which a wait has occurred.[BLUEARC-SERVER-MIB::nvramPoolStatsWaitedAllocs:1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.5].
Hitachi HNAS - Power Supply Unit Statushnas_powersupplyunit_StatusHNAS Power Supply Unit StatusIt monitors the status of the power supply unit. Possible values are ok(1),failed(2),notFitted(3),unknown(4). Component or instance is represented as power supply unit cluster node ID and power supply unit ID with dotted notation.[BLUEARC-SERVER-MIB::psuStatus:1.3.6.1.4.1.11096.6.1.1.1.2.1.13.1.3].
Hitachi HNAS - Temperature Sensorhnas_temperaturesensor_ReadingHNAS Temperature Sensor ReadingCelsiusIt monitors the temperature taken by the sensor in degrees Celsius. Component or instance is represented as temperature sensor cluster node ID and temperature sensor ID with dotted notation.[BLUEARC-SERVER-MIB::temperatureSensorCReading:1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.4].
hnas_temperaturesensor_StatusHNAS Temperature Sensor StatusIt monitors whether the temperature measurement is within the expected range. Component or instance is represented as temperature sensor cluster node ID and temperature sensor ID with dotted notation. Possible values are ok(1),tempWarning(2),tempSevere(3),tempSensorFailed(4),tempSensorWarning(5),unknown(6).[BLUEARC-SERVER-MIB::temperatureSensorStatus:1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.3].

Hitachi HNAS - v2

Description

Template to monitor Hitachi HNAS parameters like chassis drive status,CIFS Traffic parameters like Bytes Read,Bytes Written,cluster quorum device status,CPU Utilization,Fan parameters like Speed Status,Speed,field programmable gate array utilization,NFS Traffic parameters like Bytes Read,Bytes Written,NVRAM pool waited allocations,power supply unit status,Temperature Sensor parameters like Status,Reading.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Hitachi HNAS - Chassis Drive Statushnas_chassisdrive_StatusHNAS Chassis Drive StatusIt monitors the RAID status of the chassis drive. Possible values are raidUnknown(1),raidDegraded(2),raidRebuilding(3),raidFailed(4),raidInvalid(5),raidGood(6). Component or instance is represented as chassis drive cluster node ID and chassis drive ID with dotted notation.[BLUEARC-SERVER-MIB::chassisDriveStatus:1.3.6.1.4.1.11096.6.1.1.1.2.1.15.1.4].
Hitachi HNAS - CIFS Traffichnas_cifs_BytesWrittenHNAS CIFS Bytes WrittenBpsIt monitors the number of bytes written.[BLUEARC-SERVER-MIB::protocolXferStatsBytesWritten:1.3.6.1.4.1.11096.6.1.1.6.6.8.1.5].
hnas_cifs_BytesReadHNAS CIFS Bytes ReadBpsIt monitors the number of bytes read.[BLUEARC-SERVER-MIB::protocolXferStatsBytesRead:1.3.6.1.4.1.11096.6.1.1.6.6.8.1.4].
Hitachi HNAS - Cluster Quorum Device Statushnas_clusterquorum_DeviceStatusHNAS Cluster Quorum Device StatusIt monitors the status of the quorum device. Possible values are unknown(0),unconfigured(1),offLine(2),owned(3),configured(4),granted(5),clusterNodeNotUp(6),misconfigured(7).[BLUEARC-SERVER-MIB::clusterQuorumDeviceStatus:1.3.6.1.4.1.11096.6.1.1.1.2.5.7.0].
Hitachi HNAS - CPU Utilizationhnas_CpuUtilizationHNAS CPU Utilization%It monitors the HNAS CPU utilization. Component or instance is represented as Cluster Node Index and CPU Index with dotted notation.[BLUEARC-SERVER-MIB::cpuUtilization:1.3.6.1.4.1.11096.6.1.1.6.1.2.1.3].
Hitachi HNAS - Fanhnas_fan_SpeedStatusHNAS Fan Speed StatusIt monitors the speed status of the fan. Possible values are ok(1),warning(2),severe(3),unknown(4). Component or instance is represented as fan cluster node ID and fan ID with dotted notation.[BLUEARC-SERVER-MIB::fanSpeedStatus:1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.4].
hnas_fan_SpeedHNAS Fan SpeedrpmIt monitors the speed of the fan. Component or instance is represented as fan cluster node ID and fan ID with dotted notation.[BLUEARC-SERVER-MIB::fanSpeed:1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.5].
Hitachi HNAS - Field Programmable Gate Array Utilizationhnas_fpga_UtilizationHNAS FPGA Utilization%It monitors the current percentage usage averaged over the last second of this Field Programmable Gate Array.[BLUEARC-SERVER-MIB::fpgaUtilization:1.3.6.1.4.1.11096.6.1.1.6.1.4.1.4].
Hitachi HNAS - NFS Traffichnas_nfs_BytesReadHNAS NFS Bytes ReadBpsIt monitors the number of bytes read.[BLUEARC-SERVER-MIB::protocolXferStatsBytesRead:1.3.6.1.4.1.11096.6.1.1.6.6.8.1.4].
hnas_nfs_BytesWrittenHNAS NFS Bytes WrittenBpsIt monitors the number of bytes written.[BLUEARC-SERVER-MIB::protocolXferStatsBytesWritten:1.3.6.1.4.1.11096.6.1.1.6.6.8.1.5].
Hitachi HNAS - NVRAM Pool Waited Allocationshnas_nvrampool_WaitedAllocationsHNAS NVRAM Pool Waited AllocationscountIt monitors the number of allocations,for the entire NVRAM pool,for which a wait has occurred.[BLUEARC-SERVER-MIB::nvramPoolStatsWaitedAllocs:1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.5].
Hitachi HNAS - Power Supply Unit Statushnas_powersupplyunit_StatusHNAS Power Supply Unit StatusIt monitors the status of the power supply unit. Possible values are ok(1),failed(2),notFitted(3),unknown(4). Component or instance is represented as power supply unit cluster node ID and power supply unit ID with dotted notation.[BLUEARC-SERVER-MIB::psuStatus:1.3.6.1.4.1.11096.6.1.1.1.2.1.13.1.3].
Hitachi HNAS - Temperature Sensorhnas_temperaturesensor_ReadingHNAS Temperature Sensor ReadingCelsiusIt monitors the temperature taken by the sensor in degrees Celsius. Component or instance is represented as temperature sensor cluster node ID and temperature sensor ID with dotted notation.[BLUEARC-SERVER-MIB::temperatureSensorCReading:1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.4].
hnas_temperaturesensor_StatusHNAS Temperature Sensor StatusIt monitors whether the temperature measurement is within the expected range. Component or instance is represented as temperature sensor cluster node ID and temperature sensor ID with dotted notation. Possible values are ok(1),tempWarning(2),tempSevere(3),tempSensorFailed(4),tempSensorWarning(5),unknown(6).[BLUEARC-SERVER-MIB::temperatureSensorStatus:1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.3].
Hitachi HNAS - Span Capacity Utilizationhnas_span_CapacityTotalHNAS Span Capacity Total(GB)GBIt monitors the total span capacity in GB.[BLUEARC-SERVER-MIB :: spanCapacityTotalUpper : 1.3.6.1.4.1.11096.6.1.1.6.4.2.1.3,spanCapacityTotalLower : 1.3.6.1.4.1.11096.6.1.1.6.4.2.1.4]
hnas_span_CapacityUsedHNAS Span Capacity Used(GB)GBIt monitors the span capacity used in GB.[BLUEARC-SERVER-MIB :: spanCapacityUsedUpper : 1.3.6.1.4.1.11096.6.1.1.6.4.2.1.5,spanCapacityUsedLower : 1.3.6.1.4.1.11096.6.1.1.6.4.2.1.6]
hnas_span_CapacityUtilizationHNAS Span Capacity Utilization(%)%It monitors the span capacity utilization in percentage.It monitors the HNAS span capacity utilization parameters like Span Capacity Total,Span Capacity Used,Span Capacity Utilization.[BLUEARC-SERVER-MIB :: spanCapacityTotalUpper : 1.3.6.1.4.1.11096.6.1.1.6.4.2.1.3,spanCapacityTotalLower : 1.3.6.1.4.1.11096.6.1.1.6.4.2.1.4,spanCapacityUsedUpper : 1.3.6.1.4.1.11096.6.1.1.6.4.2.1.5,spanCapacityUsedLower : 1.3.6.1.4.1.11096.6.1.1.6.4.2.1.6]
Hitachi HNAS - Volume(File System) Statisticshnas_filesystem_VolumeStatusHNAS Filesystem Volume StatusMonitors the status of the volume (i.e. file system).[BLUEARC-SERVER-MIB :: volumeStatus : 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.4].Possible values are unformatted(1),mounted(2),formatted(3),needsChecking(4).
hnas_filesystem_VolumeCapacityHNAS Filesystem Volume CapacityGBMonitors the volume's (i.e. file system's) capacity in bytes.[BLUEARC-SERVER-MIB :: volumeCapacity : 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.5]
hnas_filesystem_VolumeFreeCapacityHNAS Filesystem Volume FreeGBMonitors the remaining free volume (i.e. file system) capacity in GB.[BLUEARC-SERVER-MIB :: volumeFreeCapacity : 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.6]
hnas_filesystem_VolumeUtilizationHNAS Filesystem Volume Utilization%Monitors the HNAS Filesystem Volume Utilization.[BLUEARC-SERVER-MIB :: volumeFreeCapacity : 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.6,volumeCapacity : 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.5]

Hitachi Storage Hardware Status

Description

Monitors the hardware parameters of Hitachi disk controllers and disk units such as fan,power supply,processor state,cache and environment.

Prerequisites

Tested on USP V = RAID600. sysObjectID: enterprises.116.3.11.4.1.1

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Hitachi Disk Controller (DKC) Hardware Monitorhitachi.disk.controller.hardware.processorHitachi Disk Controller Hardware ProcessorThis monitor provides the status of the hardware (HW) disk controller (DKC) processor. The possible status values are 1- No Error,2- Acute,3- Serious,4- Moderate,5- Service.[OID: 1.3.6.1.4.1.116.5.11.4.1.1.6.1.2]
hitachi.disk.controller.hardware.powersupplyHitachi Disk Controller Hardware Power SupplyThis monitor provides the status of the hardware (HW) disk controller (DKC) power supply. The possible status values are 1- No Error,2- Acute,3- Serious,4- Moderate,5- Service.[OID: 1.3.6.1.4.1.116.5.11.4.1.1.6.1.6]
hitachi.disk.controller.hardware.cacheHitachi Disk Controller Hardware CacheThis monitor provides the status of the hardware (HW) disk controller (DKC) cache. The possible status values are 1- No Error,2- Acute,3- Serious,4- Moderate,5- Service.[OID: 1.3.6.1.4.1.116.5.11.4.1.1.6.1.4]
hitachi.disk.controller.hardware.fanHitachi Disk Controller Hardware FanThis monitor provides the status of the hardware (HW) disk controller (DKC) fan. The possible status values are 1- No Error,2- Acute,3- Serious,4- Moderate,5- Service.[OID: 1.3.6.1.4.1.116.5.11.4.1.1.6.1.8]
hitachi.disk.controller.hardware.batteryHitachi Disk Controller Hardware BatteryThis monitor provides the status of the hardware (HW) disk controller (DKC) battery. The possible status values are 1- No Error,2- Acute,3- Serious,4- Moderate,5- Service.[OID: 1.3.6.1.4.1.116.5.11.4.1.1.6.1.7]
hitachi.disk.controller.hardware.environmentHitachi Disk Controller Hardware EnvironnmentThis monitor provides the status of the hardware (HW) disk controller (DKC) environment. The possible status values are 1- No Error,2- Acute,3- Serious,4- Moderate,5- Service.[OID: 1.3.6.1.4.1.116.5.11.4.1.1.6.1.9]
Hitachi Disk Unit (DKU) Hardware Monitorhitachi.disk.unit.hardware.environmentHitachi Disk Unit Hardware EnvironmentThis monitor provides the status of the hardware (HW) disk unit (DKU) environment. The possible status values are 1- No Error,2- Acute,3- Serious,4- Moderate,5- Service.[OID: 1.3.6.1.4.1.116.5.11.4.1.1.7.1.4]
hitachi.disk.unit.hardware.powersupplyHitachi Disk Unit Hardware Power SupplyThis monitor provides the status of the hardware (HW) disk unit (DKU) power supply. The possible status values are 1- No Error,2- Acute,3- Serious,4- Moderate,5- Service.[OID: 1.3.6.1.4.1.116.5.11.4.1.1.7.1.2]
hitachi.disk.unit.hardware.fanHitachi Disk Unit Hardware FanThis monitor provides the status of the hardware (HW) disk unit (DKU) fan. The possible status values are 1- No Error,2- Acute,3- Serious,4- Moderate,5- Service.[OID: 1.3.6.1.4.1.116.5.11.4.1.1.7.1.3]
hitachi.disk.unit.hardware.driveHitachi Disk Unit Hardware DriveThis monitor provides the status of the hardware (HW) disk unit (DKU) drive. The possible status values are 1- No Error,2- Acute,3- Serious,4- Moderate,5- Service.[OID: 1.3.6.1.4.1.116.5.11.4.1.1.7.1.5]

Host System Uptime

Description

Template to provide the amount of time since this host was last initialized.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Host System Uptimesystem.uptimeSystem UptimesThe amount of time since this host was last initialized.[OID - 1.3.6.1.2.1.25.1.1.0]

HPE - HTTP Management Device Health

Description

Template to monitor HP HTTP Management Device Health.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP - HTTP Management Device Healthhp.http.mgmt.device.healthHTTP Management Device HealthIt monitors the overall health of the device.Possible values are unknown(1),unused(2),ok(3),warning(4),critical(5),nonrecoverable(6) [SEMI-MIB::hpHttpMgDeviceHealth:1.3.6.1.4.1.11.2.36.1.1.5.1.1.3].

HPE Blade System Switch monitors

Description

This template is applicable on HP switches meant for blade system. For eg GbE2c Ethernet Blade switch. Monitors CPU Utilization and VLAN status.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP Blade System Switch CPU Utilizationsystem.cpu.utilizationHP Blade System Switch CPU Utilization%Monitors the utilization (in percent) of MP CPU over 64 seconds.[OID: 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.2.3.0]
HP Blade System Switch VLAN Statusvlan.statusVLAN StatusMonitors the VLAN status information. Possible values are 2- Enabled,3- Disabled.[OIDs: 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.2,1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.3]
System Uptimesystem.uptimeSystem UptimesThe time since the SNMP agent in the system was last re-initialized.[OID : 1.3.6.1.2.1.1.3.0]

HPE Compaq - Host Performance

Description

Template to monitor HPE Compaq Host Performance parameters like cpu utilization,file system space total,file system space used,file system status,physical memory size,physical memory free,physical memory utilization.[CPQHOST-MIB :: cpqHoCpuUtilFiveMin : 1.3.6.1.4.1.232.11.2.3.1.1.3,cpqHoFileSysSpaceTotal : 1.3.6.1.4.1.232.11.2.4.1.1.3,cpqHoFileSysSpaceUsed : 1.3.6.1.4.1.232.11.2.4.1.1.4,cpqHoFileSysStatus : 1.3.6.1.4.1.232.11.2.4.1.1.8,cpqHoPhysicalMemorySize : 1.3.6.1.4.1.232.11.2.13.1.0,cpqHoPhysicalMemoryFree : 1.3.6.1.4.1.232.11.2.13.2.0]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Compaq Cpq Host - Cpu Utilizationcompaq_cpqhost_CpqHoCpuUtilFiveMinCompaq Cpq Host Cpu Utilization%Monitors the Compaq cpq Host cpu utilization.[CPQHOST-MIB :: cpqHoCpuUtilFiveMin : 1.3.6.1.4.1.232.11.2.3.1.1.3]
Compaq Cpq Host - File Systemcompaq_cpqhost_CpqHoFileSysSpaceUtilizationCompaq Cpq Host File Sys Space Utilization%Monitors the Compaq Cpq Host File Sys Space Utilization.
compaq_cpqhost_CpqHoFileSysStatusCompaq Cpq Host File Sys StatusMonitors the threshold status.[CPQHOST-MIB :: cpqHoFileSysStatus : 1.3.6.1.4.1.232.11.2.4.1.1.8]
compaq_cpqhost_CpqHoFileSysSpaceTotalCompaq Cpq Host File Sys Space TotalMBMonitors the file system size in megabytes.[CPQHOST-MIB :: cpqHoFileSysSpaceTotal : 1.3.6.1.4.1.232.11.2.4.1.1.3]
compaq_cpqhost_CpqHoFileSysSpaceUsedCompaq Cpq Host File Sys Space UsedMBMonitors the compaq cpq host file sys space used.[CPQHOST-MIB :: cpqHoFileSysSpaceUsed : 1.3.6.1.4.1.232.11.2.4.1.1.4]
compaq_cpqhost_CpqHoPhysicalMemoryUtilizationCompaq Cpq Host Physical Memory Utilization%Monitors the Compaq Cpq Host Physical Memory Utilization
compaq_cpqhost_CpqHoPhysicalMemoryFreeCompaq Cpq Host Physical Memory FreeMBMonitors the Compaq Cpq Host Physical Memory Free in megabytes.[CPQHOST-MIB :: cpqHoPhysicalMemoryFree :: 1.3.6.1.4.1.232.11.2.13.2.0]
compaq_cpqhost_CpqHoPhysicalMemorySizeCompaq Cpq Host Physical Memory SizeMBMonitors the file system size in megabytes.[CPQHOST-MIB :: cpqHoPhysicalMemorySize : 1.3.6.1.4.1.232.11.2.13.1.0]

HPE Comware

Description

Template for HP Comware switch/router. Monitors entity CPU usage,memory usage,temperature,uptime,error status and alarm status. Validated on HP Comware Platform Software,Software Version 5.20.99 Release 2222P08 HP A5500-24G EI Switch with 2 Interface Slots. SNMP SysObjId=1.3.6.1.4.1.25506.11.1.24.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP Comware Entity Alarm Lighthp.comware.entity.alarm.lightHP Comware Entity Alarm LightProvides the Alarm status of this entity,It does not include the severity of alarms raised on child components. In this condition,there will be a alarm light on the entity,the object should have the same status with it.[OID: 1.3.6.1.4.1.25506.2.6.1.1.1.1.5]
HP Comware Entity CPU Usage - Rule Basedhp.comware.entity.cpu.usageHP Comware Entity CPU Usage%Provides the HP Comware CPU usage. Generally,the CPU usage will calculate the overall CPU usage on the entity,and it is not sensible with the number of CPU on the entity.[OID: 1.3.6.1.4.1.25506.2.6.1.1.1.1.6]
HP Comware Entity Error Statushp.comware.entity.error.statusHP Comware Entity Error StatusIt Indicate the error state of this entity object.[OID: 1.3.6.1.4.1.25506.2.6.1.1.1.1.19]
HP Comware Entity Temperature - Rule Basedhp.comware.entity.temperatureHP Comware Entity TemperatureCProvides the HP Comware temperature details for this Entity.[OID: 1.3.6.1.4.1.25506.2.6.1.1.1.1.12]
HP Comware Memory Usage - Rule Basedhp.comware.entity.memoryusageHP Comware Entity Memory Usage%Provides the details about the memory usage if this Entity,provides the usage vlues in percentage (%).[OID: 1.3.6.1.4.1.25506.2.6.1.1.1.1.8]
System Uptimesystem.uptimeSystem UptimesThe time since the SNMP agent in the system was last re-initialized.[OID : 1.3.6.1.2.1.1.3.0]

HPE iLO Monitors

Description

Template for HP ILO (Integrated Lights - Out). Monitors the battery,fan,temperature,fault tolerance power supply status. Also monitor controller battery status,controller interface status,etc,. Tested on HP ILO 4 AOS server.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
CPQ DA Acceleratorhp.ilo.cpq.da.accelerator.error.codeCPQ DA Accelerator Error CodeMonitors the drive array accelerator board error code. Used to determine the status of the write cache operations. The status can be: 1- Other: Indicates that the instrument agent does not recognize the error code. You may need to update your software,2-Invalid: Indicates that write cache operations are currently configured and enabled for at least one logical drive. No write cache errors have occurred,3- Bad Configuration: Indicates that write cache operations are temporarily disabled. The Array Accelerator board was configured for a different controller. This error could be caused if boards were switched from one system to another. Rerun the configuration utility and ensure that the board has been properly configured for this system. Note: If data from another system was stored on the board,running configuration utility will cause the data to be lost,4- Low Battery Power: Indicates that write cache operations are temporarily disabled due to insufficient battery power. Please view the Battery Status object instance for more information,5- Disable Command Issued: Indicates that write cache operations are temporarily disabled. The device driver issues this command when the server is taken down. This condition should not exist when the system regains power,6- No Resources Available: Indicates that write cache operations are temporarily disabled. The controller does not have sufficient resources to perform write cache operations. For example,when a replaced drive is being rebuilt,there will not be sufficient resources. Once the operation that requires the resources has completed,this condition will clear and write cache operations will resume,7- Board Not Connected: Indicates that write cache operations are temporarily disabled. The Array Accelerator board has been configured but is not currently attached to the controller. Check the alignment of the board and connections,8- Bad Mirror Data: Indicates that write cache operations have been permanently disabled. The Array Accelerator board stores mirrored copies of all data. If data exists on the board when the system is first powered up,the board performs a data compare test between the mirrored copies. If the data does not match,an error has occurred. Data may have been lost. Your board may need servicing,9- Read Failure: Indicates that write cache operations have been permanently disabled. The Array Accelerator board stores mirror copies of all data. While reading the data from the board,memory parity errors have occurred. Both copies were corrupted and cannot be retrieved. Data has been lost,and you should service the board,10- Write Failure: Indicates that write cache operations have been permanently disabled. This error occurs when an unsuccessful attempt was made to write data to the Array Accelerator board. Data could not be written to write cache memory in duplicate due to the detection of parity errors. This error does not indicate data loss. You should service the Array Accelerator board,11- Config Command: Indicates that write cache operations have been permanently disabled. The configuration of the logical drives has changed. You need to reconfigure the Array Accelerator board,12- Expand in Progress: Indicates that cache operations are temporarily disabled due to an expand of a logical drive. When the expand operation completes,the accelerator will be enabled,13- Snapshot In Progress: Indicates that cache operations are temporarily disabled due to a snapshot operation that is queued up or in progress. When the snapshot operation completes,the accelerator will be enabled,14- Redundant Low Battery: Indicates that cache operations are temporarily disabled. The redundant controller has insufficient cache battery power,15- Redundant Size Mismatch: Indicates that cache operations are temporarily disabled. The cache sizes on the redundant controllers do not match,16- Redundant Cache Failure: Indicates that cache operations are temporarily disabled. The cache on the redundant controller has failed,17- Excessive ECC Errors: Indicates that write cache operations have been permanently disabled. The number of cache lines experiencing excessive ECC errors has reached a preset limit,18- RAID ADG Enabler Module Missing: Indicates that write cache operations have been temperarily disabled. A RAID ADG logical drive is configured but the RAID ADG Enabler Module is broken or missing,19- Power On Self Test (Post) ECC Errors: Indicates that write cache operations have been permanently disabled. The cache has been disabled due to a large number of ECC errors detected while testing the cache during Power On Self Test (Post),20- Battery Hot Removed: Indicates that write cache operations have been permanently disabled. The cache has been disabled because a battery has been hot removed.[OIDs: 1.3.6.1.4.1.232.3.2.2.2.1.1,1.3.6.1.4.1.232.3.2.2.2.1.5]
hp.ilo.cpq.da.accelerator.batteryCPQ DA Accelerator Battery StatusMonitors the array accelerator board battery status. Provides the status of each battery pack on the board. The batteries can only recharge when the system has power applied. Possible values are 1- Other:Indicates that the instrument agent does not recognize battery status. You may need to update your software,2- Ok: Indicates that a particular battery pack is fully charged,3- Charging: The battery power is less than 75%. The Drive Array Controller is attempting to recharge the battery. A battery can take as long as 36 hours to fully recharge.After 36 hours,if the battery has not recharged,it is considered failed,4- Failed: The battery pack is below the sufficient voltage level and has not recharged in 36 hours. Your Array Accelerator board needs to be serviced,5- Degraded:The battery is still operating,however,one of the batteries in the pack has failed to recharge properly. Your Array Accelerator board should be serviced as soon as possible,6- NotPresent: There are no batteries associated with this controller.[OIDs: 1.3.6.1.4.1.232.3.2.2.2.1.1,1.3.6.1.4.1.232.3.2.2.2.1.6]
hp.ilo.cpq.da.accelerator.conditionCPQ DA Accelerator Overall ConditionMonitors the overall condition of drive array accelerator. Possible values are 1- Other,2- OK,3- Degraded,4- Failed.[OIDs: 1.3.6.1.4.1.232.3.2.2.2.1.1,1.3.6.1.4.1.232.3.2.2.2.1.9]
CPQ DA Array Controller Statusarraycontroller.statusCPQ DA Array Controller ConditionMonitors the overall condition of this controller,and any associated logical drives,physical drives,and array accelerators. Possible values are 1- Other,2-OK,3- Degraded,4- Failed.[OIDs: 1.3.6.1.4.1.232.3.2.2.1.1.1,1.3.6.1.4.1.232.3.2.2.1.1.6]
CPQ DA Conditionhp.ilo.cpq.da.conditionCPQ Drive Array Overall StatusMonitors the overall condition (status) of the driver array. Possible values are 1- Other,2- OK,3- Degraded,4- Failed.[OID: 1.3.6.1.4.1.232.3.1.3.0]
CPQ DA Logical Drivelogical.disk.statusCPQ DA Logical Drive ConditionMonitors the overall condition of this logical drive and any associated physical drives. Possible values are 1- Other,2-OK,3- Degraded,4- Failed.[OIDs: 1.3.6.1.4.1.232.3.2.3.1.1.1,1.3.6.1.4.1.232.3.2.3.1.1.2,1.3.6.1.4.1.232.3.2.3.1.1.11]
CPQ DA Physical Drivecpq.da.physical.drive.conditionCPQ DA Physical Drive ConditionMonitors the overall condition of this physical drive. Possible values are 1- Other,2-OK,3- Degraded,4- Failed.[OIDs: 1.3.6.1.4.1.232.3.2.5.1.1.1,1.3.6.1.4.1.232.3.2.5.1.1.2,1.3.6.1.4.1.232.3.2.5.1.1.37]
cpq.da.physical.drive.smartstatusCPQ DA Physical Drive SMART StatusMonitors the physical drive S.M.A.R.T status. Possible values are 1- other: The agent is unable to determine if the status of S.M.A.R.T predictive failure monitoring for this drive,2- ok: Indicates the drive is functioning properly,3- replaceDrive: Indicates that the drive has a S.M.A.R.T predictive failure error and should be replaced.[OIDs: 1.3.6.1.4.1.232.3.2.5.1.1.1,1.3.6.1.4.1.232.3.2.5.1.1.2,1.3.6.1.4.1.232.3.2.5.1.1.57]
CPQ HE Environmentcpu.fan.thermal.healthCPQ CPU Fan Thermal HealthProvides the status of the processor fan(s) in the system. This value will be one of the following:- other(1): Fan status detection is not supported by this system or driver,ok(2): All fans are operating properly,failed(4): A fan is not operating properly. System will be shutdown if the failed(4) condition occurs.[OID: 1.3.6.1.4.1.232.6.2.6.5.0]
temperature.sensors.healthCPQ System Temperature Sensors StatusProvides the status of the system's temperature sensors. This value will be one of the following:- other(1): Temp sensing is not supported by this system or driver,ok(2): All temp sensors are within normal operating range,degraded(3): A temp sensor is outside of normal operating range,failed(4): A temp sensor detects a condition that could permanently damage the system. The system will automatically shutdown if the failed(4) condition results.[OIDs: 1.3.6.1.4.1.232.6.2.6.3.0]
system.fans.healthCPQ System Fans StatusThe status of the fan(s) in the system. This value will be one of the following:- other(1): Fan status detection is not supported by this system or driver,ok(2): All fans are operating properly,degraded(3): A non-required fan is not operating properly,failed(4): A required fan is not operating properly.[OID: 1.3.6.1.4.1.232.6.2.6.4.0]
over.server.thermal.healthCPQ Thermal Environment Overall HealthSpecifies the overall condition of the system's thermal environment.[OID: 1.3.6.1.4.1.232.6.2.6.1.0]
hp.ilo.cpq.he.conditionCPQ Server Health System Overall StatusMonitors the overall status of the server health system. Possible values are 1- Other,2- OK,3- Degraded,4- Failed.[OID: 1.3.6.1.4.1.232.6.1.3.0]
hp.ilo.cpq.he.asr.conditionCPQ Server Health ASR Overall ConditionMonitors the overall condition of the Automatic Server Recovery (ASR) feature. Possible values are 1- Other,2- OK,3- Degraded,4- Failed.[OID: 1.3.6.1.4.1.232.6.2.5.17.0]
hp.ilo.cpq.he.eventlog.conditionCPQ HE Event Log ConditionMonitors the overall condition of the integrated management log feature. Possible values are 1- Other,2- OK,3- degraded,4- Failed.[OID: 1.3.6.1.4.1.232.6.2.11.2.0]
hp.ilo.cpq.he.resillent.memory.conditionCPQ HE Resilient Memory ConditionMonitors the current condition of the Advanced Memory Protection subsystem. Possible values are 1- other: The system does not support fault tolerant memory or the state cannot be determined by the Management Agent,2- ok: This system is operating normally,3- degraded: The system is running in a degraded state because the Advanced Memory Protection subsystem has been engaged.[OID: 1.3.6.1.4.1.232.6.2.14.4.0]
cpq.ss.conditionCPQ Storage System Overall ConditionMonitors the overall condition (status) of the storage system. Possible values are 1- Other,2- OK,3- Degraded.[OID: 1.3.6.1.4.1.232.8.1.3.0]
cpq.he.fault.tolerant.powersupply.conditionCPQ HE Fault Tolerant Power Supply ConditionMonitors the overall condition of the fault tolerant power supply sub-system. Possible values are 1- Other,2-OK,3- Degraded,4- Failed.[OID: 1.3.6.1.4.1.232.6.2.9.1.0]
CPQ HE Fault Tolerant Fan Healthfault.tolerant.fan.statusCPQ HE Fault Tolerent Fan HealthProvides the condition of the fan. Possible values are 1- other: Fan status detection is not supported by this system or driver,2- ok: The fan is operating properly,3- degraded: A redundant fan is not operating properly,4- failed: A non-redundant fan is not operating properly.[OIDs: 1.3.6.1.4.1.232.6.2.6.7.1.1,1.3.6.1.4.1.232.6.2.6.7.1.2,1.3.6.1.4.1.232.6.2.6.7.1.9]
CPQ HE Power Supply Healthfault.tolerant.power.supply.statusCPQ Fault Tolerant Power Supply HealthMonitors the condition of the power supply. Possible values are 1- other: The status could not be determined or not present,2- ok: The power supply is operating normally,3- degraded: Power supply is outside of normal operating range,4- failed: power supply component detects a condition that could permanently damage the system.[OIDs: 1.3.6.1.4.1.232.6.2.9.3.1.4,1.3.6.1.4.1.232.6.2.9.3.1.1,1.3.6.1.4.1.232.6.2.9.3.1.2]
CPQ HE Resilient Memory 2 Board Conditionhp.ilo.cpq.he.resillentmemory.board.conditionCPQ HE Resilient Memory 2 Board ConditionMonitors the current status of the Advanced Memory Protection memory board or cartridge or riser. Possible values are 1- other: The condition of this memory board or cartridge or riser could not be determined,2- ok: The memory board or cartridge or riser is operating normally,3- degraded: The memory board or cartridge or riser is in an error state. Check for correct memory installation and that the board has been inserted properly.[OIDs: 1.3.6.1.4.1.232.6.2.14.12.1.1,1.3.6.1.4.1.232.6.2.14.12.1.11]
CPQ HE Resilient Memory 2 Module Conditioncpq.he.resilient.memory.2.module.conditionCPQ HE Resilient Memory 2 Module ConditionMonitors the current status of the correctable memory errors for this memory module. Possible values are 1- other: ECC is not supported on this memory module or the condition could not be determined,2- ok: The memory module is operating normally,3- degraded: The memory module is correctable error count has exceeded threshold or a configuration error has been detected,4- degradedModuleIndexUnknown: The correctable error count has exceeded threshold. The module number not available.[OIDs: 1.3.6.1.4.1.232.6.2.14.13.1.1,1.3.6.1.4.1.232.6.2.14.13.1.20]
CPQ HE Temperature Sensor Healthtemperature.sensor.statusCPQ Temperature Sensor HealthMonitors the temperature sensor condition. Possible values are 1- other: Temperature could not be determined,2- ok: The temperature sensor is within normal operating range,3- degraded: The temperature sensor is outside of normal operating range,4- failed: The temperature sensor detects a condition that could permanently damage the system. The system will automatically shutdown if the failed(4) condition results.[OIDs: 1.3.6.1.4.1.232.6.2.6.8.1.6,1.3.6.1.4.1.232.6.2.6.8.1.1,1.3.6.1.4.1.232.6.2.6.8.1.2]
CPQ Host CPU Utilizationcpu.usageCPQ Host CPU Utilization%Monitors the The CPU utilization as a percentage of the theoretical maximum during the last five minutes. A value of -1 indicates that no CPU utilization information is available for this processor.[OID: 1.3.6.1.4.1.232.11.2.3.1.1.3,1.3.6.1.4.1.232.11.2.3.1.1.1]
CPQ SE CPU Cache Statuscpq.se.cpu.cache.statusCPQ CPU Cache StatusMonitors the status of the cache unit. If the cache is optional and not installed,unknown(1) will be returned.[OIDs: 1.3.6.1.4.1.232.1.2.2.3.1.1,1.3.6.1.4.1.232.1.2.2.3.1.2,1.3.6.1.4.1.232.1.2.2.3.1.5]
CPQ SE CPU Statuscpu.healthCPQ CPU StatusThe status of the processor. Possible values are 1- Unknown: The status of the CPU could not be determined,2- OK: The CPU is functioning normally,3- Degraded: The CPU is in a pre-failure warrantee state,4- Failed: The CPU is in a failed state,5- Disabled: The CPU has been disabled during power-on-self-test.[OIDs: 1.3.6.1.4.1.232.1.2.2.1.1.3,1.3.6.1.4.1.232.1.2.2.1.1.6]
CPQ SE Overall Conditioncpq.he.se.conditionCPQ Server Overall ConditionMonitors the overall condition of the server. Possible values are 1- Other,2- OK,3- Degraded,4- Failed.[OID: 1.3.6.1.4.1.232.1.1.3.0]
CPQ SI Conditioncpq.si.conditionCPQ Server Information Overall ConditionMonitors the overall status of the CPQ server information. Possible values are 1- Other,2- OK,3- Degraded,4- Failed.[OID: 1.3.6.1.4.1.232.2.1.3.0]
CPQ SM2 ILOcpq.sm2.conditionCPQ SM2 ConditionMonitors the overall condition of the Remote Insight/ Integrated Lights-Out. Possible values are 1- Other,2- OK,3- Degraded,4- Failed.[OID: 1.3.6.1.4.1.232.9.1.3.0]
cpq.sm2.controller.battery.statusCPQ SM2 Controller Battery StatusMonitors the remote insight battery status. Possible values are 1- other: The Insight Agent is unable to determine if the battery needs replacement,2- batteryOk: The Remote Insight battery is OK,3- batteryFailed: The Remote Insight battery needs replacement,4- batteryDisconnected: The Remote Insight battery is disconnected.[OID: 1.3.6.1.4.1.232.9.2.2.5.0]
cpq.sm2.controller.interface.statusCPQ SM2 Controller Interface StatusMonitors the Remote Insight/ Integrated Lights-Out Interface Status. Possible values are 1- other: The Insight Agent is unable to determine the status of the Remote Insight/ Integrated Lights-Out interface,2- ok: The Remote Insight/ Integrated Lights-Out firmware is responding to commands,3- notResponding: The Remote Insight/ Integrated Lights-Out firmware is not responding to commands.[OID: 1.3.6.1.4.1.232.9.2.2.17.0]
CPQ SM2 NIC Conditioncpq.sm2.nic.conditionCPQ SM2 NIC ConditionMonitors the overall condition of the Remote Insight/ Integrated Lights-Out Network Interface Controller (NIC). Possible values are are 1- Other,2- OK,3- Degraded,4- Failed.[OIDs: 1.3.6.1.4.1.232.9.2.5.1.1.11,1.3.6.1.4.1.232.9.2.5.1.1.5]
CPQ SS Boxcpq.ss.box.fan.statusCPQ SS Box Fan StatusMonitors the current status of the fans in the drive box. Possible values are 1- other: Fan monitoring is not supported by this system or it is not supported by the driver,2- ok: All fans are working normally,3- failed: One or more storage system fans have failed. The fan(s) should be replaced immediately to avoid hardware damage,4- noFan: This unit does not support fan monitoring,5- degraded: At least one storage system fan has failed,but there is still sufficient cooling capacity to allow the system to continue. The fan should be replaced.[OIDs: 1.3.6.1.4.1.232.8.2.1.1.1,1.3.6.1.4.1.232.8.2.1.1.2,1.3.6.1.4.1.232.8.2.1.1.7]
cpq.ss.box.conditionCPQ SS Box ConditionMonitors the overall condition of the drive box. Possible values are 1- other: The agent does not recognize the status. You may need to upgrade your software,2- ok: The storage system is operating normally. No user action is required,3- degraded: The storage system is degraded. You need to check the temperature status or power supply status of this storage system. Additionally,if the side panel for the storage system is removed,the air flow changes could result in improper cooling of the drives and affect the temperature status,4- failed: The storage system has failed.[OIDs: 1.3.6.1.4.1.232.8.2.1.1.2,1.3.6.1.4.1.232.8.2.1.1.8]
cpq.ss.box.temperature.statusCPQ SS Box Temperature StatusMonitors the temperature status of the drive system. Possible values are 1- other:Temperature monitoring is not supported by this systemor it is not supported by the driver,2- ok:The temperature is within normal operating range,3- degraded:The temperature is outside of normal operating range,4- failed:The temperature could permanently damage the system.The storage system will automatically shutdown if thiscondition is detected,5- noTemp:This unit does not support temperature monitoring.[OIDs: 1.3.6.1.4.1.232.8.2.1.1.2,1.3.6.1.4.1.232.8.2.1.1.9]
cpq.ss.box.fault.tolerance.power.supplyCPQ SS Box Fault Tolerant Power Supply StatusMonitors the overall status of the fault tolerant power supply sub-system in a drive box. Possible values are 1- other: The power supply status cannot be determined,2- ok: There are no detected power supply failures,3- degraded: One of the power supply units in a fault tolerant power supply has failed,4- failed: No failure conditions can currently be determined,5- noFltTolPower: This unit does not support fault tolerant power supply monitoring.[OIDs: 1.3.6.1.4.1.232.8.2.1.1.2,1.3.6.1.4.1.232.8.2.1.1.11]

HPE iLO Monitors - v2

Description

Template to monitor HPE hardware components through iLO (Integrated Lights - Out). Monitors the battery,fan,temperature,fault tolerance power supply status. Also monitor controller battery status,controller interface status,Drive array condition,Network Interface Card Status etc,. Tested on HPE Integrated Lights-Out 6 (iLO6) ProLiant DL380 Gen11. This template will works for both higher and lower versions of iLO6 but all the metrics may or may not work for all iLO versions as functionality differs between different iLO versions.

Prerequisites

Device must have support for CPQHLTH-MIB,CPQSM2-MIB,CPQSINFO-MIB,CPQSTDEQ-MIB,CPQIDA-MIB and CPQNIC-MIB.

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HPE iLO CPQ DA Array Controller Statushpe_ilo_drivearray_ControllerBoardConditionHPE iLO Drive Array Controller Board ConditionMonitors the Array Controller Board Condition.[CPQIDA-MIB :: cpqDaCntlrBoardCondition : 1.3.6.1.4.1.232.3.2.2.1.1.12] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_drivearray_ControllerBoardStatusHPE iLO Drive Array Controller Board StatusMonitors the Array Controller Board Status.[CPQIDA-MIB :: cpqDaCntlrBoardStatus : 1.3.6.1.4.1.232.3.2.2.1.1.10] Possible values are : 1 : other,2 : ok,3: generalFailure,4 : cableProblem,5 : poweredOff,6 : cacheModuleMissing,7 : degraded.
hpe_ilo_drivearray_ControllerEncryptCspNvramStatusHPE iLO Drive Array Controller Encrypt Csp Nvram StatusMonitors the Array Controller Encryption Critical Security Parameter NVRAM Status.[CPQIDA-MIB :: cpqDaCntlrEncryptCspNvramStatus : 1.3.6.1.4.1.232.3.2.2.1.1.36] Possible values are : 1 : other,2 : ok,3 : detectionFailed.
hpe_ilo_drivearray_ControllerPartnerBoardStatusHPE iLO Drive Array Controller Partner Board StatusMonitors the Array Controller Partner Board Status.[CPQIDA-MIB :: cpqDaCntlrPartnerBoardStatus : 1.3.6.1.4.1.232.3.2.2.1.1.11] Possible values are : 1 : other,2 : ok,3: generalFailure,4 : cableProblem,5 : poweredOff.
hpe_ilo_drivearray_ControllerAccessModuleStatusHPE iLO Drive Array Controller Access Module StatusMonitors the Array Controller RAID ADG Enabler Module Status.[CPQIDA-MIB :: cpqDaCntlrAccessModuleStatus : 1.3.6.1.4.1.232.3.2.2.1.1.18] Possible values are : 1 : other,2 : notSupported,3: notPresent,4 : badSignature,5 : badChecksum,6 : fullyFunctional,7 : upgradeFirmware.
hpe_ilo_drivearray_ControllerPartnerBoardConditionHPE iLO Drive Array Controller Partner Board ConditionMonitors the Array Controller Partner Board Condition.[CPQIDA-MIB :: cpqDaCntlrPartnerBoardCondition : 1.3.6.1.4.1.232.3.2.2.1.1.13] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_drivearray_ControllerCurrentTemperatureHPE iLO Drive Array Controller Current TemperatureCelsiusMonitors the Array Controller Current Temperature.[CPQIDA-MIB :: cpqDaCntlrCurrentTemp : 1.3.6.1.4.1.232.3.2.2.1.1.32]
hpe_ilo_drivearray_ControllerConditionHPE iLO Drive Array Controller ConditionMonitors the condition of the device. This value represents the overall condition of this controller,and any associated logical drives,physical drives,and cache modules.[CPQIDA-MIB :: cpqDaCntlrCondition 1.3.6.1.4.1.232.3.2.2.1.1.6] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_drivearray_ControllerRedundancyErrorHPE iLO Drive Array Controller Redundancy ErrorMonitors the Array Controller Redundancy Error.[CPQIDA-MIB :: cpqDaCntlrRedundancyError : 1.3.6.1.4.1.232.3.2.2.1.1.17] Possible values are : 1 : other,2 : noFailure,3: noRedundantController,4 : differentHardware,5 : noLink,6 : differentFirmware,7 : differentCache,8 : otherCacheFailure,9 : noDrives,10 : otherNoDrives,11 : unsupportedDrives,12 : expandInProgress.
HPE iLO CPQ DA Conditionhpe_ilo_drivearray_MibConditionHPE iLO Drive Array Mib ConditionMonitors the overall condition (status) of the drive array.[CPQIDA-MIB :: cpqDaMibCondition : 1.3.6.1.4.1.232.3.1.3.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
HPE iLO CPQ DA Logical Drivehpe_ilo_drivearray_LogicalDriveSizeHPE iLO Drive Array Logical Drive SizeMBMonitors the Logical Drive Size.[CPQIDA-MIB :: cpqDaLogDrvSize : 1.3.6.1.4.1.232.3.2.3.1.1.9]
hpe_ilo_drivearray_LogicalDriveStatusHPE iLO Drive Array Logical Drive StatusMonitors the Logical Drive Status.[CPQIDA-MIB :: cpqDaLogDrvStatus : 1.3.6.1.4.1.232.3.2.3.1.1.4] Possible values are : 1 : other,2 : ok,3 : failed,4 : unconfigured,5 : recovering,6 : readyForRebuild,7 : rebuilding,8 : wrongDrive,9 : badConnect,10 : overheating,11 : shutdown,12 : expanding,13 : notAvailable,14 : queuedForExpansion,15 : multipathAccessDegraded,16 : erasing,17: predictiveSpareRebuildReady,18 : rapidParityInitInProgress,19 : rapidParityInitPending,20 : noAccessEncryptedNoCntlrKey,21 : unencryptedToEncryptedInProgress,22 : newLogDrvKeyRekeyInProgress,23 : noAccessEncryptedCntlrEncryptnNotEnbld,24 : unencryptedToEncryptedNotStarted,25 : newLogDrvKeyRekeyRequestReceived,26 : unsupported,27 : offline,28 : sedQualInProgrss,29 : sedQualFailed.
hpe_ilo_drivearray_LogicalDriveConditionHPE iLO Drive Array Logical Drive ConditionMonitors the Logical Drive condition.[CPQIDA-MIB :: cpqDaLogDrvCondition : 1.3.6.1.4.1.232.3.2.3.1.1.11] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
HPE iLO CPQ DA Physical Drivehpe_ilo_drivearray_PhysicalDriveHSeekErrorsHPE iLO Drive Array Physical Drive HSeek ErrorscountMonitors the Seek Errors (High).[CPQIDA-MIB :: cpqDaPhyDrvHSeekErrs : 1.3.6.1.4.1.232.3.2.5.1.1.20]
hpe_ilo_drivearray_PhysicalDriveHardReadErrorsHPE iLO Drive Array Physical Drive Hard Read ErrorscountMonitors the Hard Read Errors.[CPQIDA-MIB :: cpqDaPhyDrvHardReadErrs : 1.3.6.1.4.1.232.3.2.5.1.1.16]
hpe_ilo_drivearray_PhysicalDriveStatusHPE iLO Drive Array Physical Drive StatusMonitors the Physical Drive Status.[CPQIDA-MIB :: cpqDaPhyDrvStatus : 1.3.6.1.4.1.232.3.2.5.1.1.6] Possible values are : 1 : other,2 : ok,3: failed,4 : predictiveFailure,5 : erasing,6 : eraseDone,7 : eraseQueued,8 : ssdWearOut,9 : notAuthenticated.
hpe_ilo_drivearray_PhysicalDriveRecoveredReadErrorsHPE iLO Drive Array Physical Drive Recovered Read ErrorscountMonitors the Recovered Read Errors.[CPQIDA-MIB :: cpqDaPhyDrvRecvReadErrs : 1.3.6.1.4.1.232.3.2.5.1.1.17]
hpe_ilo_drivearray_PhysicalDriveHardWriteErrorsHPE iLO Drive Array Physical Drive Hard Write ErrorscountMonitors the Physical Drive Hard Write Errors.[CPQIDA-MIB :: cpqDaPhyDrvHardWriteErrs : 1.3.6.1.4.1.232.3.2.5.1.1.18]
hpe_ilo_drivearray_PhysicalDriveConditionHPE iLO Drive Array Physical Drive ConditionMonitors the condition of the device. This value represents the overall condition of this physical drive.[CPQIDA-MIB :: cpqDaPhyDrvCondition : 1.3.6.1.4.1.232.3.2.5.1.1.37] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_drivearray_PhysicalDriveSSDWearStatusHPE iLO Drive Array Physical Drive SSD Wear StatusMonitors the Drive Array Physical Drive Solid State Disk Wear Status.[CPQIDA-MIB :: cpqDaPhyDrvSSDWearStatus : 1.3.6.1.4.1.232.3.2.5.1.1.73] Possible values are : 1 : other,2 : ok,3: fiftySixDayThreshold,4 : fivePercentThreshold,5 : twoPercentThreshold,6 : ssdWearOut.
hpe_ilo_drivearray_PhysicalDriveRecoveredWriteErrorsHPE iLO Drive Array Physical Drive Recovered Write ErrorscountMonitors the Physical Drive Recovered Write Errors.[CPQIDA-MIB :: cpqDaPhyDrvRecvWriteErrs : 1.3.6.1.4.1.232.3.2.5.1.1.19]
hpe_ilo_drivearray_PhysicalDriveSeekErrsHPE iLO Drive Array Physical Drive Seek ErrorscountMonitors the Seek Errors (low).[CPQIDA-MIB :: cpqDaPhyDrvSeekErrs : 1.3.6.1.4.1.232.3.2.5.1.1.21]
hpe_ilo_drivearray_PhysicalDriveCurrentTemperatureHPE iLO Drive Array Physical Drive Current TemperatureCelsiusMonitors the Drive Array Physical Drive Current Temperature.[CPQIDA-MIB :: cpqDaPhyDrvCurrentTemperature : 1.3.6.1.4.1.232.3.2.5.1.1.70]
hpe_ilo_drivearray_PhysicalDriveSmartStatusHPE iLO Drive Array Physical Drive Smart StatusMonitors the Physical Drive Smart Status.[CPQIDA-MIB :: cpqDaPhyDrvSmartStatus : 1.3.6.1.4.1.232.3.2.5.1.1.57] Possible values are : 1 : other,2 : ok,3: replaceDrive,4 : replaceDriveSSDWearOut.
HPE iLO CPQ HE Environmenthpe_ilo_AsrConditionHPE iLO Automatic Server Recovery ConditionMonitors the overall condition of the Automatic Server Recovery (ASR) feature.[CPQHLTH-MIB :: cpqHeAsrCondition : 1.3.6.1.4.1.232.6.2.5.17.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_BatteryBackupUnitConditionHPE iLO Battery Backup Unit ConditionMonitors the overall condition of the BBU sub-system.[CPQHLTH-MIB :: cpqHeBbuCondition : 1.3.6.1.4.1.232.6.2.23.1.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_faulttolerant_PowerSupplyStatusHPE iLO FaultTolerant PowerSupply StatusMonitors the status of the fault tolerant power supply.[CPQHLTH-MIB :: cpqHeFltTolPwrSupplyStatus : 1.3.6.1.4.1.232.6.2.9.2.0] Possible values are : 1 : other,2 : notSupported,3 : notInstalled,4 : installed.
hpe_ilo_ThermalConditionHPE iLO Thermal ConditionMonitors the overall condition of the system's thermal environment.[CPQHLTH-MIB :: cpqHeThermalCondition : 1.3.6.1.4.1.232.6.2.6.1.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_HardwareBiosConditionHPE iLO Hardware Bios ConditionMonitors an error has been detected during Pre-OS Test (POST) or during initial hardware initialization. Typically,this will be a hardware interlock not closed due to an adapter or cable not properly seated in the slot. The first action is to review the iLO Event Log and iLO Integrated Management Log (IML) for a new event. If no entries found,the server will usually require a physical inspection to identify the source of the issue by observing the external and internal hardware status LEDs.[CPQHLTH-MIB :: cpqHeHWBiosCondition : 1.3.6.1.4.1.232.6.2.16.1.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_resilient_MemoryConditionHPE iLO Resilient Memory ConditionMonitors the current condition of the Advanced Memory Protection subsystem.[CPQHLTH-MIB :: cpqHeResilientMemCondition : 1.3.6.1.4.1.232.6.2.14.4.0] Possible values are : 1 : other,2 : ok,3 : degraded.
hpe_ilo_ThermalSystemFanStatusHPE iLO Thermal System Fan StatusMonitors the status of the fan(s) in the system.[CPQHLTH-MIB :: cpqHeThermalSystemFanStatus : 1.3.6.1.4.1.232.6.2.6.4.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_EventLogConditionHPE iLO Event Log ConditionMonitors the overall condition of the Integrated Management Log feature.[CPQHLTH-MIB :: cpqHeEventLogCondition : 1.3.6.1.4.1.232.6.2.11.2.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_ThermalCpuFanStatusHPE iLO Thermal Cpu Fan StatusMonitors the status of the processor fan(s) in the system.[CPQHLTH-MIB :: cpqHeThermalCpuFanStatus : 1.3.6.1.4.1.232.6.2.6.5.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_ThermalTemperatureStatusHPE iLO Thermal Temperature StatusMonitors the status of the system's temperature sensors.[CPQHLTH-MIB :: cpqHeThermalTempStatus : 1.3.6.1.4.1.232.6.2.6.3.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_SystemBackupBatteryConditionHPE iLO System Backup Battery ConditionMonitors the overall condition of the battery backup sub-system.[CPQHLTH-MIB :: cpqHeSysBackupBatteryCondition : 1.3.6.1.4.1.232.6.2.17.1.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_NvdimmConditionHPE iLO Nvdimm ConditionMonitors the overall condition of the NVDIMM sub-system.[CPQHLTH-MIB :: cpqHeNvdimmCondition : 1.3.6.1.4.1.232.6.2.22.1.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_faulttolerant_PowerSupplyConditionHPE iLO FaultTolerant PowerSupply ConditionMonitors the overall condition of the fault tolerant power supply sub-system.[CPQHLTH-MIB :: cpqHeFltTolPwrSupplyCondition : 1.3.6.1.4.1.232.6.2.9.1.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_MibConditionHPE iLO Mib ConditionMonitors the overall status of the server health system.[CPQHLTH-MIB :: cpqHeMibCondition : 1.3.6.1.4.1.232.6.1.3.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
HPE iLO CPQ HE Fault Tolerant Fan Healthhpe_ilo_faulttolerant_FanPresentHPE iLO Fault Tolerant Fan PresentMonitors if the fan described is present in the system.[CPQHLTH-MIB :: cpqHeFltTolFanLocale : 1.3.6.1.4.1.232.6.2.6.7.1.3,cpqHeFltTolFanPresent : 1.3.6.1.4.1.232.6.2.6.7.1.4] Possible values are : 1 : other,2 : absent,3 : present.
hpe_ilo_faulttolerant_FanSpeedHPE iLO Fault Tolerant Fan SpeedMonitors the speed of the fan.[CPQHLTH-MIB :: cpqHeFltTolFanSpeed : 1.3.6.1.4.1.232.6.2.6.7.1.6] Possible values are : 1 : other,2 : normal,3 : high.
hpe_ilo_faulttolerant_FanConditionHPE iLO Fault Tolerant Fan ConditionMonitors the condition of the fan.[CPQHLTH-MIB :: cpqHeFltTolFanCondition : 1.3.6.1.4.1.232.6.2.6.7.1.9] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
HPE iLO CPQ HE Fault Tolerant Power Supply Healthhpe_ilo_faulttolerant_PowerSupplyErrorConditionHPE iLO FaultTolerant Power Supply Error ConditionMonitors the Error condition of the power supply.[CPQHLTH-MIB :: cpqHeFltTolPowerSupplyErrorCondition : 1.3.6.1.4.1.232.6.2.9.3.1.18] Possible values are : 1 : noError,2 : generalFailure,3 : overvoltage,4 : overcurrent,5 : overtemperature,6 : powerinputloss,7 : fanfailure,8 : vinhighwarning,9 : vinlowwarning,10 : vouthighwarning,11 : voutlowwarning,12 : inlettemphighwarning,13 : iinternaltemphighwarning,14 : vauxhighwarning,15 : vauxlowwarning,16 : vauxlowwarning,17: goodinstandby.
hpe_ilo_faulttolerant_PowerSupplyMainVoltageHPE iLO Fault Tolerant Power Supply Main VoltagevMonitors the input main voltage of the power supply in volts.[CPQHLTH-MIB :: cpqHeFltTolPowerSupplyMainVoltage : 1.3.6.1.4.1.232.6.2.9.3.1.6]
hpe_ilo_fault_tolerant_PowerSupplyConditionHPE iLO Fault Tolerant Power Supply ConditionMonitors the condition of the power supply.[CPQHLTH-MIB :: cpqHeFltTolPowerSupplyCondition : 1.3.6.1.4.1.232.6.2.9.3.1.4] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_faulttolerant_PowerSupplyCapacityUsedHPE iLO Fault Tolerant Power Supply Capacity UsedWMonitors the currently used capacity of the power supply in watts.[CPQHLTH-MIB :: cpqHeFltTolPowerSupplyCapacityUsed : 1.3.6.1.4.1.232.6.2.9.3.1.7]
hpe_ilo_faulttolerant_PowerSupplyCapacityMaximumHPE iLO Fault Tolerant Power Supply Capacity MaximumWMonitors the maximum capacity of the power supply in watts.[CPQHLTH-MIB :: cpqHeFltTolPowerSupplyCapacityMaximum : 1.3.6.1.4.1.232.6.2.9.3.1.8]
hpe_ilo_fault_tolerant_PowerSupplyStatusHPE iLO Fault Tolerant Power Supply StatusMonitors the status of the power supply.[CPQHLTH-MIB :: cpqHeFltTolPowerSupplyStatus : 1.3.6.1.4.1.232.6.2.9.3.1.5] Possible values are : 1 : noError,2 : generalFailure,3 : bistFailure,4 : fanFailure,5 : tempFailure,6 : interlockOpen,7 : epromFailed,8 : vrefFailed,9 : dacFailed,10 : ramTestFailed,11 : voltageChannelFailed,12 : orringdiodeFailed,13 : brownOut,14 : giveupOnStartup,15 : nvramInvalid,16 : calibrationTableInvalid,17: noPowerInput.
HPE iLO CPQ HE Resilient Memory 2 Board Conditionhpe_ilo_resilient_Memory2BoardErrorStatusHPE iLO Resilient Memory 2 Board Error StatusMonitors the error status of the Advanced Memory Protection board or Cartridge or riser.[CPQHLTH-MIB :: cpqHeResMem2BoardErrorStatus : 1.3.6.1.4.1.232.6.2.14.12.1.6] Possible values are : 1 : other,2 : noError,3 : dimmEccError,4 : unlockError,5 : configError,6 : busError,7 : powerError,8 : advancedEcc,9 : onlineSpare,10 : mirrored,11 : mirroredDimmError,12 : memoryRaid,13 : raidDimmError,14 : lockStep,15 : lockStepError,16 : a3dc,17: a3dcError.
hpe_ilo_resilient_Memory2BoardConditionHPE iLO Resilient Memory 2 Board ConditionMonitors the the current status of the Advanced Memory Protection memory board or cartridge or riser.[CPQHLTH-MIB :: cpqHeResMem2BoardCondition : 1.3.6.1.4.1.232.6.2.14.12.1.11] Possible values are : 1 : other,2 : ok,3 : degraded
HPE iLO CPQ HE Resilient Memory 2 Module Conditionhpe_ilo_resilient_Memory2ModuleConditionHPE iLO Resilient Memory 2 Module ConditionMonitors the current status of the correctable memory errors for this memory module.[CPQHLTH-MIB :: cpqHeResMem2ModuleSerialNo : 1.3.6.1.4.1.232.6.2.14.13.1.12,cpqHeResMem2ModuleCondition : 1.3.6.1.4.1.232.6.2.14.13.1.20] Possible values are : 1 : other,2 : ok,3 : degraded,4 : degradedModuleIndexUnknown.
hpe_ilo_resilient_Memory2ModuleStatusHPE iLO Resilient Memory 2 Module StatusMonitors the current status of the correctable memory errors for this memory module.[CPQHLTH-MIB :: cpqHeResMem2ModuleStatus : 1.3.6.1.4.1.232.6.2.14.13.1.19] Possible values are : 1 : other,2 : notPresent,3: present,4 : good,5 : add,6 : upgrade,7 : missing,8 : doesNotMatch,9 : notSupported,10 : badConfig,11 : degraded,12 : spare,13 : partial,14 : configError,15 : trainingFailure.
HPE iLO CPQ HE System Battery Conditionhpe_ilo_SystemBatteryConditionHPE iLO System Battery ConditionMonitors the condition of the backup battery.[CPQHLTH-MIB :: cpqHeSysBatteryCondition : 1.3.6.1.4.1.232.6.2.17.2.1.4] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_SystemBatteryPresentHPE iLO System Battery PresentMonitors whether the backup battery is present in the chassis.[CPQHLTH-MIB :: cpqHeSysBatteryPresent : 1.3.6.1.4.1.232.6.2.17.2.1.3,cpqHeSysBatterySerialNumber : 1.3.6.1.4.1.232.6.2.17.2.1.9] Possible values are : 1 : other,2 : absent,3 : present.
hpe_ilo_SystemBatteryStatusHPE iLO System Battery StatusMonitors the status of the battery.[CPQHLTH-MIB :: cpqHeSysBatteryStatus : 1.3.6.1.4.1.232.6.2.17.2.1.5] Possible values are : 1 : noError,2 : generalFailure,3: shutdownHighResistance,4 : shutdownLowVoltage,5 : shutdownShortCircuit,6 : shutdownChargeTimeout,7 : shutdownOverTemperature,8 : shutdownDischargeMinVoltage,9 : shutdownDischargeCurrent,10 : shutdownLoadCountHigh,11 : shutdownEnablePin,12 : shutdownOverCurrent,13 : shutdownPermanentFailure,14 : shutdownBackupTimeExceeded,15 : predictiveFailure.
HPE iLO CPQ HE Temperature Sensor Healthhpe_ilo_TemperatureConditionHPE iLO Temperature ConditionMonitors the Temperature sensor condition.[CPQHLTH-MIB :: cpqHeTemperatureCondition : 1.3.6.1.4.1.232.6.2.6.8.1.6] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_TemperatureCelsiusHPE iLO Temperature CelsiusCelsiusMonitors the current temperature sensor reading in degrees celsius.[CPQHLTH-MIB :: cpqHeTemperatureLocale : 1.3.6.1.4.1.232.6.2.6.8.1.3,cpqHeTemperatureCelsius : 1.3.6.1.4.1.232.6.2.6.8.1.4]
HPE iLO CPQ NIC Conditionhpe_ilo_NicMibConditionHPE iLO NIC Mib ConditionMonitors the overall status of the NIC.[CPQNIC-MIB :: cpqNicMibCondition : 1.3.6.1.4.1.232.18.1.3.0] Possible values are : 1 : unknown,2 : ok,3 : degraded,4 : failed.
HPE iLO CPQ SE CPU Cache Statushpe_ilo_se_CpuCacheStatusHPE iLO SE CPU Cache StatusMonitors the status of the cache unit. If the cache is optional and not installed,unknown(1) will be returned.[CPQSTDEQ-MIB :: cpqSeCpuCacheUnitIndex : 1.3.6.1.4.1.232.1.2.2.3.1.1,cpqSeCpuCacheLevelIndex : 1.3.6.1.4.1.232.1.2.2.3.1.2,cpqSeCpuCacheStatus : 1.3.6.1.4.1.232.1.2.2.3.1.5] Possible values are : 1 : unknown,2 : ok,3 : degraded,4 : failed.
HPE iLO CPQ SE CPU Statushpe_ilo_se_CpuStatusHPE iLO SE CPU StatusMonitors the status of the processor.[CPQSTDEQ-MIB :: cpqSeCpuStatus : 1.3.6.1.4.1.232.1.2.2.1.1.6] Possible values are : 1 : unknown,2 : ok,3 : degraded,4 : failed,5 : disabled.
HPE iLO CPQ SE Overall Conditionhpe_ilo_se_MibConditionHPE iLO SE Mib ConditionMonitors the overall condition of the server.[CPQSTDEQ-MIB :: cpqSeMibCondition : 1.3.6.1.4.1.232.1.1.3.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_se_CpuConditionHPE iLO SE CPU ConditionMonitors the the overall condition of the processor sub-system.[CPQSTDEQ-MIB :: cpqSeCpuCondition : 1.3.6.1.4.1.232.1.2.2.4.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
HPE iLO CPQ SI Conditionhpe_ilo_server_information_MibConditionHPE iLO Server Information Mib ConditionMonitors the overall status of the CPQ server information.[CPQSINFO-MIB :: cpqSiMibCondition : 1.3.6.1.4.1.232.2.1.3.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
HPE iLO CPQ SM2 ILOhpe_ilo_sm2_MibConditionHPE iLO SM2 Mib ConditionMonitors the overall condition of the Remote Insight/ Integrated Lights-Out.[CPQSM2-MIB :: cpqSm2MibCondition : 1.3.6.1.4.1.232.9.1.3.0] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_sm2_ControllerExternalPowerCableStatusHPE iLO SM2 Controller External PowerCable StatusMonitors the Remote Insight External Power Cable Status.[CPQSM2-MIB :: cpqSm2CntlrExternalPowerCableStatus : 1.3.6.1.4.1.232.9.2.2.25.0] Possible values are : 1 : other,2 : externallyConnected,3 : disconnected,4 : internallyConnected,5 : externallyAndInternallyConnected,6 :notApplicable.
hpe_ilo_sm2_ControllerBatteryStatusHPE iLO SM2 Controller Battery StatusMonitors the remote insight battery status.[CPQSM2-MIB :: cpqSm2CntlrBatteryStatus : 1.3.6.1.4.1.232.9.2.2.5.0] Possible values are : 1 : other,2 : batteryOk,3 : batteryFailed,4 : batteryDisconnected.
hpe_ilo_sm2_ControllerInterfaceStatusHPE iLO SM2 Controller Interface StatusMonitors the Remote Insight/ Integrated Lights-Out Interface Status.[CPQSM2-MIB :: cpqSm2CntlrInterfaceStatus : 1.3.6.1.4.1.232.9.2.2.17.0] Possible values are : 1 : other,2 : ok,3 : notResponding.
hpe_ilo_sm2_ControllerVirtualPowerCableStatusHPE iLO SM2 Controller Virtual PowerCable StatusMonitors the Remote Insight Virtual Power Cable Status.[CPQSM2-MIB :: cpqSm2CntlrVirtualPowerCableStatus : 1.3.6.1.4.1.232.9.2.2.24.0] Possible values are : 1 : other,2 : connected,3 : disconnected,4 : notApplicable.
HPE iLO CPQ SM2 NIC Conditionhpe_ilo_sm2_NicConditionHPE iLO SM2 NIC ConditionMonitors the overall condition of the Remote Insight / Integrated Lights-Out Network Interface Controller (NIC).[CPQSM2-MIB :: cpqSm2NicLocation : 1.3.6.1.4.1.232.9.2.5.1.1.1,cpqSm2NicCondition : 1.3.6.1.4.1.232.9.2.5.1.1.11] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
HPE iLO NIC Physical Adapterhpe_ilo_nic_PhysicalAdapterInternalMacTransmitErrorsHPE iLO NIC Physical Adapter Internal Mac Transmit ErrorscountMonitors the count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error.[CPQNIC-MIB :: cpqNicIfPhysAdapterInternalMacTransmitErrors : 1.3.6.1.4.1.232.18.2.3.1.1.27]
hpe_ilo_nic_PhysicalAdapterFCSErrorsHPE iLO NIC Physical Adapter FCS ErrorscountMonitors the count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check.[CPQNIC-MIB :: cpqNicIfPhysAdapterFCSErrors : 1.3.6.1.4.1.232.18.2.3.1.1.21]
hpe_ilo_nic_PhysicalAdapterDeferredTransmissionsHPE iLO NIC Physical Adapter Deferred TransmissionscountMonitors the number of packets deferred before transmission. This counter contains the number of packets whose transmission was delayed on its first attempt because the medium was busy. Packets involved in any collisions are not counted. Frames that wait before transmission are counted.This statistic will be incremented often during normal operation on a busy network.[CPQNIC-MIB :: cpqNicIfPhysAdapterDeferredTransmissions : 1.3.6.1.4.1.232.18.2.3.1.1.24]
hpe_ilo_nic_PhysicalAdapterStatusHPE iLO NIC Physical Adapter StatusMonitors the physical adapter status.[CPQNIC-MIB :: cpqNicIfPhysAdapterStatus : 1.3.6.1.4.1.232.18.2.3.1.1.14] Possible values are : 1 : unknown,2 : ok,3 : generalFailure,4 : linkFailure.
hpe_ilo_nic_PhysicalAdapterMultipleCollisionFramesHPE iLO NIC Physical Adapter Multiple Collision FramescountMonitors the number of multiple collision packets. This counter contains the number of packets that are involved in multiple collisions and are subsequently transmitted successfully.[CPQNIC-MIB :: cpqNicIfPhysAdapterMultipleCollisionFrames : 1.3.6.1.4.1.232.18.2.3.1.1.23]
hpe_ilo_nic_PhysicalAdapterSingleCollisionFramesHPE iLO NIC Physical Adapter Single Collision FramescountMonitors the number of single collision packets. This counter contains the number of packets that are involved in a single collision and are subsequently transmitted successfully.[CPQNIC-MIB :: cpqNicIfPhysAdapterSingleCollisionFrames : 1.3.6.1.4.1.232.18.2.3.1.1.22]
hpe_ilo_nic_PhysicalAdapterStateHPE iLO NIC Physical Adapter StateMonitors the fault tolerant state of this adapter.[CPQNIC-MIB :: cpqNicIfPhysAdapterState : 1.3.6.1.4.1.232.18.2.3.1.1.13] Possible values are : 1 : unknown,2 : active,3 : standby,4 : failed.
hpe_ilo_nic_PhysicalAdapterAlignmentErrorsHPE iLO NIC Physical Adapter Alignment ErrorscountMonitors the count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check.The alignment of a frame is checked by the receiver after the packet has failed the Cyclical Redundancy Check (CRC). Misaligned packets do not end on an 8-bit boundary.All packets contain a set number of bytes and must end after a defined number of bytes.Packets that do not end on a byte boundary fail the alignment check.[CPQNIC-MIB :: cpqNicIfPhysAdapterAlignmentErrors : 1.3.6.1.4.1.232.18.2.3.1.1.20]
hpe_ilo_nic_PhysicalAdapterBadTransmitsHPE iLO NIC Physical Adapter Bad TransmitscountMonitors the count of frames that were not transmitted by the adapter because of an error.[CPQNIC-MIB :: cpqNicIfPhysAdapterBadTransmits : 1.3.6.1.4.1.232.18.2.3.1.1.18]
hpe_ilo_nic_PhysicalAdapterLateCollisionsHPE iLO NIC Physical Adapter Late CollisionscountMonitors the Late collisions may be a symptom of cabling problems.[CPQNIC-MIB :: cpqNicIfPhysAdapterLateCollisions : 1.3.6.1.4.1.232.18.2.3.1.1.25]
hpe_ilo_nic_PhysicalAdapterBadReceivesHPE iLO NIC Physical Adapter Bad ReceivescountMonitors the count of frames that were received by the adapter but which had an error.[CPQNIC-MIB :: cpqNicIfPhysAdapterBadReceives : 1.3.6.1.4.1.232.18.2.3.1.1.19]
hpe_ilo_nic_PhysicalAdapterInternalMacReceiveErrorsHPE iLO NIC Physical Adapter Internal Mac Receive ErrorscountMonitors the count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error.[CPQNIC-MIB :: cpqNicIfPhysAdapterInternalMacReceiveErrors : 1.3.6.1.4.1.232.18.2.3.1.1.30]
hpe_ilo_nic_PhysicalAdapterConditionHPE iLO NIC Physical Adapter ConditionMonitors the condition of this physical adapter.[CPQNIC-MIB :: cpqNicIfPhysAdapterCondition : 1.3.6.1.4.1.232.18.2.3.1.1.12] Possible values are : 1 : other,2 : ok,3 : degraded,4 : failed.
hpe_ilo_nic_PhysicalAdapterExcessiveCollisionsHPE iLO NIC Physical Adapter Excessive CollisionscountMonitors the number of packets aborted during transmission due to excessive collisions.[CPQNIC-MIB :: cpqNicIfPhysAdapterExcessiveCollisions : 1.3.6.1.4.1.232.18.2.3.1.1.26]
hpe_ilo_nic_PhysicalAdapterCarrierSenseErrorsHPE iLO NIC Physical Adapter Carrier Sense ErrorscountMonitors the number of packets transmitted with carrier sense errors.[CPQNIC-MIB :: cpqNicIfPhysAdapterCarrierSenseErrors : 1.3.6.1.4.1.232.18.2.3.1.1.28]

HPE LeftHand SAN Cluster - G2

Description

Applicable on the HP LeftHand SAN devices. Monitors the space pool,storage latency,volume usage and volume latency.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP LeftHand SAN Cluster Manager Statuslefthand.cluster.managerCluster Manager StatusProvides the manager name and status. Possible Manager status are 1- Up,2- Down.[OID: 1.3.6.1.4.1.9804.3.1.1.2.12.44.1.2,1.3.6.1.4.1.9804.3.1.1.2.12.44.1.5,1.3.6.1.4.1.9804.3.1.1.2.12.44.1.7,1.3.6.1.4.1.9804.3.1.1.2.12.44.1.9]

HPE LeftHand SAN Cluster - G3

Description

Applicable on the HP LeftHand SAN devices. Monitors the space pool,storage latency,volume usage and volume latency.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP LeftHand SAN Cluster Performance Monitorlefthand.cluster.available.spaceCluster Available SpaceGBSpace available to create volumes. Here used space will be subtracted from total space.

HPE LeftHand SAN Cluster - G4

Description

Applicable on the HP LeftHand SAN devices. Monitors the space pool,storage latency,volume usage and volume latency.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP LeftHand SAN Cluster Performance Monitorlefthand.cluster.total.spaceCluster Total SpaceGBThe total space for data storage in the cluster.[OID: 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.29]

HPE LeftHand SAN Cluster - G5

Description

Applicable on the HP LeftHand SAN devices. Monitors the space pool,storage latency,volume usage and volume latency.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP LeftHand SAN Cluster Performance Monitorlefthand.cluster.used.spaceCluster Used SpaceGBThe amount of storage space that has been used in the cluster.[OID: 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.31]

HPE LeftHand SAN Cluster - G6

Description

Applicable on the HP LeftHand SAN devices. Monitors the space pool,storage latency,volume usage and volume latency.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP LeftHand SAN Cluster Performance Monitorlefthand.cluster.space.utilizationCluster Space Utilization%The percentage of storage space that has been used in the cluster. Here used space and total space metrics are used for calculating utilization.

HPE LeftHand SAN Cluster - G7

Description

Applicable on the HP LeftHand SAN devices. Monitors the space pool,storage latency,volume usage and volume latency.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP LeftHand SAN Cluster Performance Monitorlefthand.cluster.read.latencyCluster Read LatencymsThe total time spent waiting for read operations to complete in the cluster. The difference between current and the previous value of clusClusterStatsIoLatencyRead object will be considered.[OID:1.3.6.1.4.1.9804.3.1.1.2.12.48.1.26]

HPE LeftHand SAN Cluster - G8

Description

Applicable on the HP LeftHand SAN devices. Monitors the space pool,storage latency,volume usage and volume latency.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP LeftHand SAN Cluster Performance Monitorlefthand.cluster.write.latencyCluster Write LatencymsThe total time spent waiting for write operations to complete in the cluster. The difference between current and the previous value of clusClusterStatsIoLatencyWrite object will be considered.[OID:1.3.6.1.4.1.9804.3.1.1.2.12.48.1.27]

HPE LeftHand SAN Cluster - G9

Description

Applicable on the HP LeftHand SAN devices. Monitors the space pool,storage latency,volume usage and volume latency.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP LeftHand SAN Cluster Volume Snapshot Monitorlefthand.cluster.volume.snapshot.latency.readSnapshot Latency ReadmsThe total time spent waiting for read operations to complete on the snapshot.[OID: 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.42]

HPE LeftHand SAN Cluster - G10

Description

Applicable on the HP LeftHand SAN devices. Monitors the space pool,storage latency,volume usage and volume latency.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP LeftHand SAN Cluster Volume Snapshot Monitorlefthand.cluster.volume.snapshot.latency.writeSnapshot Latency WritemsThe total time spent waiting for write operations to complete on the snapshot.[OID: 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.43]

HPE LeftHand SAN Cluster - G11

Description

Applicable on the HP LeftHand SAN devices. Monitors the space pool,storage latency,volume usage and volume latency.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP LeftHand SAN Cluster Volume Snapshot Monitorlefthand.cluster.volume.snapshot.used.percentSnapshot Used Percent%The space used by the snapshot as a percentage of the cluster space.[OID: 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.31]

HPE LeftHand SAN Cluster - G12

Description

Applicable on the HP LeftHand SAN devices. Monitors the space pool,storage latency,volume usage and volume latency.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP LeftHand SAN Cluster Volume Snapshot Monitorlefthand.cluster.volume.snapshot.replication.statusSnapshot Replication StatusThe snapshot replication status. The status will be normal if the snapshot is available,faulty otherwise.[OID: 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.14]

HPE LeftHand SAN Cluster - G13

Description

Applicable on the HP LeftHand SAN devices. Monitors the space pool,storage latency,volume usage and volume latency.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP LeftHand SAN Cluster Volume Spacelefthand.cluster.volume.sizeCluster Volume SizeGBThe volume size of the cluster. (Reported Size) [OID: 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.5]

HPE LeftHand SAN Cluster - G14

Description

Applicable on the HP LeftHand SAN devices. Monitors the space pool,storage latency,volume usage and volume latency.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP LeftHand SAN Cluster Volume Spacelefthand.cluster.volume.available.spaceCluster Volume Available SpaceGBThe storage space available in the volume before the size is reached. For thinly provisioned volumes the cluster must have sufficient storage space to support this.[OID: 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.51]

HPE LeftHand SAN Cluster - G15

Description

Applicable on the HP LeftHand SAN devices. Monitors the space pool,storage latency,volume usage and volume latency.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
HP LeftHand SAN Cluster Volume Spacelefthand.cluster.volume.used.percentCluster Volume Used Percent%The percentage of storage space that has been used on the volume.[OID: 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.52]

HPE LeftHand SAN Health Check - G2

Description

This template is applicable for LeftHand SAN devices.Monitors the environmental parameters like fan,power,temperature,voltage etc along with the cache status.[LEFTHAND-NETWORKS-NSM-INFO-MIB]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Lefthand Cache Statuslefthand.san.health.cache.statusCache StatusThe RAID controller cache status. Possible values are 1 - Pass 2 - Failed [OID: 1.3.6.1.4.1.9804.3.1.1.2.1.91.1.91]

HPE LeftHand SAN Health Check - G3

Description

This template is applicable for LeftHand SAN devices.Monitors the environmental parameters like fan,power,temperature,voltage etc along with the cache status.[LEFTHAND-NETWORKS-NSM-INFO-MIB]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Lefthand Cache Statuslefthand.san.health.cache.bbu.statusBattery Backup Unit(BBU) StatusGives cache's BBU (Battery Backup Unit) status. Possible values are 1.Pass 2.Fail [OID:1.3.6.1.4.1.9804.3.1.1.2.1.91.1.23]

HPE LeftHand SAN Health Check - G4

Description

This template is applicable for LeftHand SAN devices.Monitors the environmental parameters like fan,power,temperature,voltage etc along with the cache status.[LEFTHAND-NETWORKS-NSM-INFO-MIB]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Lefthand Fan Statuslefthand.fan.statusFan StatusIt monitors the fan status.[OIDs:1.3.6.1.4.1.9804.3.1.1.2.1.111.1.90,1.3.6.1.4.1.9804.3.1.1.2.1.111.1.91]

HPE LeftHand SAN Health Check - G5

Description

This template is applicable for LeftHand SAN devices.Monitors the environmental parameters like fan,power,temperature,voltage etc along with the cache status.[LEFTHAND-NETWORKS-NSM-INFO-MIB]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Lefthand Power Statuslefthand.power.supply.statePower Supply StateIt returns power supply state and status.[OID:1.3.6.1.4.1.9804.3.1.1.2.1.131.1.90,1.3.6.1.4.1.9804.3.1.1.2.1.131.1.91]

HPE LeftHand SAN Health Check - G6

Description

This template is applicable for LeftHand SAN devices.Monitors the environmental parameters like fan,power,temperature,voltage etc along with the cache status.[LEFTHAND-NETWORKS-NSM-INFO-MIB]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Lefthand Storage Device Smart Health Statusstorage.device.smart.health.statusStorage Device Smart Health StatusThe device SMART health status. Possible values are 1. Pass 2. Fail.[OID:1.3.6.1.4.1.9804.3.1.1.2.4.2.1.18]

HPE LeftHand SAN Health Check - G7

Description

This template is applicable for LeftHand SAN devices.Monitors the environmental parameters like fan,power,temperature,voltage etc along with the cache status.[LEFTHAND-NETWORKS-NSM-INFO-MIB]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Lefthand Temperature Statuslefthand.temperature.sensor.valueTemperature Sensor ValueCelsiusThe temperature sensor value in Celsius.[OID:1.3.6.1.4.1.9804.3.1.1.2.1.121.1.3]

HPE LeftHand SAN Health Check - G8

Description

This template is applicable for LeftHand SAN devices.Monitors the environmental parameters like fan,power,temperature,voltage etc along with the cache status.[LEFTHAND-NETWORKS-NSM-INFO-MIB]

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Lefthand Temperature Statuslefthand.temperature.sensor.statusTemperature Sensor StatusThe temperature sensor status. Passible values are 1.Pass 2.Fail [OID: 1.3.6.1.4.1.9804.3.1.1.2.1.121.1.91]

HPE LeftHand SAN Health Check - G9

Descriptio